From patchwork Thu Feb 16 14:07:39 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Tomi Valkeinen X-Patchwork-Id: 654583 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 99AD0C64ED8 for ; Thu, 16 Feb 2023 14:08:13 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229841AbjBPOIL (ORCPT ); Thu, 16 Feb 2023 09:08:11 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:42666 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229813AbjBPOIL (ORCPT ); Thu, 16 Feb 2023 09:08:11 -0500 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [IPv6:2001:4b98:dc2:55:216:3eff:fef7:d647]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1A0AA212A8; Thu, 16 Feb 2023 06:08:06 -0800 (PST) Received: from desky.lan (91-154-32-225.elisa-laajakaista.fi [91.154.32.225]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id D4FF310B; Thu, 16 Feb 2023 15:08:01 +0100 (CET) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1676556483; bh=HbWNenI/G4zv4TW5L35QwXt13u4Au7tl//1zPBQlFis=; h=From:To:Cc:Subject:Date:From; b=qAKBUTvyvZTpFkVkse52w/eWpuj5nZrvRic0LfHluQTV4dygS/JQVVGOtl5iP4yRP sc4dKt8s3j5p8nSytSoPQt1uzFEdSk+qlZHoIp61yYRPu1EOjQWQ0orIjV8Fegjruu woiv/kOfWzzbnK+zjjvw/MFS1MPEusH+qBydRpNc= From: Tomi Valkeinen To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org, Rob Herring , Krzysztof Kozlowski , Wolfram Sang , Luca Ceresoli , Andy Shevchenko , Matti Vaittinen , Laurent Pinchart Cc: Mauro Carvalho Chehab , Peter Rosin , Liam Girdwood , Mark Brown , Sakari Ailus , Michael Tretter , Shawn Tu , Hans Verkuil , Mike Pagano , =?utf-8?q?Krzysztof_Ha=C5=82asa?= , Marek Vasut , Satish Nagireddy , Tomi Valkeinen Subject: [PATCH v9 0/8] i2c-atr and FPDLink Date: Thu, 16 Feb 2023 16:07:39 +0200 Message-Id: <20230216140747.445477-1-tomi.valkeinen@ideasonboard.com> X-Mailer: git-send-email 2.34.1 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Hi, You can find v8 from: https://lore.kernel.org/all/20230120153417.1156207-1-tomi.valkeinen@ideasonboard.com/ Diff to v8 included below. Main changes in v9: - Add "media: subdev: Split V4L2_SUBDEV_ROUTING_NO_STREAM_MIX" patch - Improved i2c-atr docs - Pass adapter_parent to i2c_atr_add_adapter(), so that the i2c-atr adapters can be children of the serializers (instead of being children of the deserializer as before). - UB9xx: Validate formats - UB913: Convert incoming 2X8 formats to 1X16 on the output side - UB9xx: Use 1X16 instead of 2X8 formats in FPD-Link and CSI-2 busses - UB953/UB960: Drop TPG (for now), as it was too hacky - UB960: Add TODO list - UB960: Use unnamed structures to group fields - UB960: Simplify tracking of the current rxport/txport register page - UB960: Rename *_csiport_* to *_txport_* to match the rxport naming - UB960: Use v4l2_fwnode_endpoint_parse - UB960: Add 16bit register accessors - UB960: Verify that each source only provides streams using a single VC - UB960: Drop the (unused) legacy s_stream - UB960: Use V4L2_SUBDEV_ROUTING_NO_STREAM_MIX - Plenty of cosmetic/style changes Tomi Luca Ceresoli (1): i2c: add I2C Address Translator (ATR) support Tomi Valkeinen (7): media: subdev: Split V4L2_SUBDEV_ROUTING_NO_STREAM_MIX dt-bindings: media: add TI DS90UB913 FPD-Link III Serializer dt-bindings: media: add TI DS90UB953 FPD-Link III Serializer dt-bindings: media: add TI DS90UB960 FPD-Link III Deserializer media: i2c: add DS90UB960 driver media: i2c: add DS90UB913 driver media: i2c: add DS90UB953 driver .../bindings/media/i2c/ti,ds90ub913.yaml | 133 + .../bindings/media/i2c/ti,ds90ub953.yaml | 134 + .../bindings/media/i2c/ti,ds90ub960.yaml | 431 ++ Documentation/i2c/index.rst | 1 + Documentation/i2c/muxes/i2c-atr.rst | 97 + MAINTAINERS | 16 + drivers/i2c/Kconfig | 9 + drivers/i2c/Makefile | 1 + drivers/i2c/i2c-atr.c | 545 +++ drivers/media/i2c/Kconfig | 47 + drivers/media/i2c/Makefile | 3 + drivers/media/i2c/ds90ub913.c | 906 ++++ drivers/media/i2c/ds90ub953.c | 1400 ++++++ drivers/media/i2c/ds90ub960.c | 4181 +++++++++++++++++ drivers/media/v4l2-core/v4l2-subdev.c | 17 +- include/linux/i2c-atr.h | 116 + include/media/i2c/ds90ub9xx.h | 22 + include/media/v4l2-subdev.h | 16 +- 18 files changed, 8068 insertions(+), 7 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub913.yaml create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub953.yaml create mode 100644 Documentation/devicetree/bindings/media/i2c/ti,ds90ub960.yaml create mode 100644 Documentation/i2c/muxes/i2c-atr.rst create mode 100644 drivers/i2c/i2c-atr.c create mode 100644 drivers/media/i2c/ds90ub913.c create mode 100644 drivers/media/i2c/ds90ub953.c create mode 100644 drivers/media/i2c/ds90ub960.c create mode 100644 include/linux/i2c-atr.h create mode 100644 include/media/i2c/ds90ub9xx.h Interdiff against v8: diff --git a/Documentation/i2c/muxes/i2c-atr.rst b/Documentation/i2c/muxes/i2c-atr.rst index c7e060ca682d..da226fd4de63 100644 --- a/Documentation/i2c/muxes/i2c-atr.rst +++ b/Documentation/i2c/muxes/i2c-atr.rst @@ -5,6 +5,7 @@ Kernel driver i2c-atr ===================== Author: Luca Ceresoli +Author: Tomi Valkeinen Description ----------- @@ -47,24 +48,37 @@ Topology:: Alias table: +A, B and C are three physical I2C busses, electrically independent from +each other. The ATR receives the transactions initiated on bus A and +propagates them on bus B or bus C or none depending on the device address +in the transaction and based on the alias table. + +Alias table: + .. table:: - ====== ===== - Client Alias - ====== ===== - X 0x20 - Y 0x30 - ====== ===== + =============== ===== + Client Alias + =============== ===== + X (bus B, 0x10) 0x20 + Y (bus C, 0x10) 0x30 + =============== ===== Transaction: - Slave X driver sends a transaction (on adapter B), slave address 0x10 - - ATR driver rewrites messages with address 0x20, forwards to adapter A + - ATR driver finds slave X is on bus B and has alias 0x20, rewrites + messages with address 0x20, forwards to adapter A - Physical I2C transaction on bus A, slave address 0x20 - - ATR chip propagates transaction on bus B with address translated to 0x10 - - Slave X chip replies on bus B - - ATR chip forwards reply on bus A - - ATR driver rewrites messages with address 0x10 + - ATR chip detects transaction on address 0x20, finds it in table, + propagates transaction on bus B with address translated to 0x10, + keeps clock streched on bus A waiting for reply + - Slave X chip (on bus B) detects transaction at its own physical + address 0x10 and replies normally + - ATR chip stops clock stretching and forwards reply on bus A, + with address translated back to 0x20 + - ATR driver receives the reply, rewrites messages with address 0x10 + as they were initially - Slave X driver gets back the msgs[], with reply and address 0x10 Usage: diff --git a/drivers/i2c/i2c-atr.c b/drivers/i2c/i2c-atr.c index c872647ae808..a41e941ad972 100644 --- a/drivers/i2c/i2c-atr.c +++ b/drivers/i2c/i2c-atr.c @@ -130,6 +130,7 @@ static int i2c_atr_map_msgs(struct i2c_atr_chan *chan, struct i2c_msg *msgs, if (unlikely(chan->orig_addrs_size < num)) { u16 *new_buf; + /* We don't care about old data, hence no realloc() */ new_buf = kmalloc_array(num, sizeof(*new_buf), GFP_KERNEL); if (!new_buf) return -ENOMEM; @@ -272,6 +273,9 @@ static int i2c_atr_attach_client(struct i2c_adapter *adapter, if (ret) goto err_free; + dev_dbg(atr->dev, "chan%u: client 0x%02x mapped at alias 0x%02x (%s)\n", + chan->chan_id, client->addr, alias_id, client->name); + c2a->client = client; c2a->alias = alias_id; list_add(&c2a->node, &chan->alias_list); @@ -294,10 +298,15 @@ static void i2c_atr_detach_client(struct i2c_adapter *adapter, atr->ops->detach_client(atr, chan->chan_id, client); c2a = i2c_atr_find_mapping_by_client(&chan->alias_list, client); - if (c2a) { - list_del(&c2a->node); - kfree(c2a); - } + if (!c2a) + return; /* This shouldn't happen */ + + dev_dbg(atr->dev, + "chan%u: client 0x%02x unmapped from alias 0x%02x (%s)\n", + chan->chan_id, client->addr, c2a->alias, client->name); + + list_del(&c2a->node); + kfree(c2a); } static int i2c_atr_bus_notifier_call(struct notifier_block *nb, @@ -391,6 +400,7 @@ void i2c_atr_delete(struct i2c_atr *atr) EXPORT_SYMBOL_NS_GPL(i2c_atr_delete, I2C_ATR); int i2c_atr_add_adapter(struct i2c_atr *atr, u32 chan_id, + struct device *adapter_parent, struct fwnode_handle *bus_handle) { struct i2c_adapter *parent = atr->parent; @@ -413,6 +423,9 @@ int i2c_atr_add_adapter(struct i2c_atr *atr, u32 chan_id, if (!chan) return -ENOMEM; + if (!adapter_parent) + adapter_parent = dev; + chan->atr = atr; chan->chan_id = chan_id; INIT_LIST_HEAD(&chan->alias_list); @@ -423,7 +436,7 @@ int i2c_atr_add_adapter(struct i2c_atr *atr, u32 chan_id, chan->adap.owner = THIS_MODULE; chan->adap.algo = &atr->algo; chan->adap.algo_data = chan; - chan->adap.dev.parent = dev; + chan->adap.dev.parent = adapter_parent; chan->adap.retries = parent->retries; chan->adap.timeout = parent->timeout; chan->adap.quirks = parent->quirks; diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index efd5f717a5f7..6427ad971ca6 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -29,6 +29,9 @@ obj-$(CONFIG_VIDEO_CS3308) += cs3308.o obj-$(CONFIG_VIDEO_CS5345) += cs5345.o obj-$(CONFIG_VIDEO_CS53L32A) += cs53l32a.o obj-$(CONFIG_VIDEO_CX25840) += cx25840/ +obj-$(CONFIG_VIDEO_DS90UB913) += ds90ub913.o +obj-$(CONFIG_VIDEO_DS90UB953) += ds90ub953.o +obj-$(CONFIG_VIDEO_DS90UB960) += ds90ub960.o obj-$(CONFIG_VIDEO_DW9714) += dw9714.o obj-$(CONFIG_VIDEO_DW9768) += dw9768.o obj-$(CONFIG_VIDEO_DW9807_VCM) += dw9807-vcm.o @@ -142,6 +145,3 @@ obj-$(CONFIG_VIDEO_VPX3220) += vpx3220.o obj-$(CONFIG_VIDEO_VS6624) += vs6624.o obj-$(CONFIG_VIDEO_WM8739) += wm8739.o obj-$(CONFIG_VIDEO_WM8775) += wm8775.o -obj-$(CONFIG_VIDEO_DS90UB913) += ds90ub913.o -obj-$(CONFIG_VIDEO_DS90UB953) += ds90ub953.o -obj-$(CONFIG_VIDEO_DS90UB960) += ds90ub960.o diff --git a/drivers/media/i2c/ds90ub913.c b/drivers/media/i2c/ds90ub913.c index 60a07b5bace3..f7696bce7c77 100644 --- a/drivers/media/i2c/ds90ub913.c +++ b/drivers/media/i2c/ds90ub913.c @@ -91,6 +91,31 @@ static inline struct ub913_data *sd_to_ub913(struct v4l2_subdev *sd) return container_of(sd, struct ub913_data, sd); } +struct ub913_format_info { + u32 incode; + u32 outcode; +}; + +static const struct ub913_format_info ub913_formats[] = { + /* Only RAW10 with 8-bit payload is supported at the moment */ + { .incode = MEDIA_BUS_FMT_YUYV8_2X8, .outcode = MEDIA_BUS_FMT_YUYV8_1X16 }, + { .incode = MEDIA_BUS_FMT_UYVY8_2X8, .outcode = MEDIA_BUS_FMT_UYVY8_1X16 }, + { .incode = MEDIA_BUS_FMT_VYUY8_2X8, .outcode = MEDIA_BUS_FMT_VYUY8_1X16 }, + { .incode = MEDIA_BUS_FMT_YVYU8_2X8, .outcode = MEDIA_BUS_FMT_YVYU8_1X16 }, +}; + +static const struct ub913_format_info *ub913_find_format(u32 incode) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(ub913_formats); ++i) { + if (ub913_formats[i].incode == incode) + return &ub913_formats[i]; + } + + return NULL; +} + static int ub913_read(const struct ub913_data *priv, u8 reg, u8 *val) { unsigned int v; @@ -251,7 +276,7 @@ static int _ub913_set_routing(struct v4l2_subdev *sd, struct v4l2_subdev_state *state, struct v4l2_subdev_krouting *routing) { - static const struct v4l2_mbus_framefmt format = { + static const struct v4l2_mbus_framefmt informat = { .width = 640, .height = 480, .code = MEDIA_BUS_FMT_UYVY8_2X8, @@ -261,6 +286,18 @@ static int _ub913_set_routing(struct v4l2_subdev *sd, .quantization = V4L2_QUANTIZATION_LIM_RANGE, .xfer_func = V4L2_XFER_FUNC_SRGB, }; + static const struct v4l2_mbus_framefmt outformat = { + .width = 640, + .height = 480, + .code = MEDIA_BUS_FMT_UYVY8_1X16, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_SRGB, + .ycbcr_enc = V4L2_YCBCR_ENC_601, + .quantization = V4L2_QUANTIZATION_LIM_RANGE, + .xfer_func = V4L2_XFER_FUNC_SRGB, + }; + struct v4l2_subdev_stream_configs *stream_configs; + unsigned int i; int ret; /* @@ -276,10 +313,19 @@ static int _ub913_set_routing(struct v4l2_subdev *sd, if (ret) return ret; - ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format); + ret = v4l2_subdev_set_routing(sd, state, routing); if (ret) return ret; + stream_configs = &state->stream_configs; + + for (i = 0; i < stream_configs->num_configs; ++i) { + if (stream_configs->configs[i].pad == UB913_PAD_SINK) + stream_configs->configs[i].fmt = informat; + else + stream_configs->configs[i].fmt = outformat; + } + return 0; } @@ -361,15 +407,22 @@ static int ub913_set_fmt(struct v4l2_subdev *sd, { struct ub913_data *priv = sd_to_ub913(sd); struct v4l2_mbus_framefmt *fmt; + const struct ub913_format_info *finfo; if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE && priv->enabled_source_streams) return -EBUSY; - /* No transcoding, source and sink formats must match. */ + /* Source format is fully defined by the sink format, so not settable */ if (format->pad == UB913_PAD_SOURCE) return v4l2_subdev_get_fmt(sd, state, format); + finfo = ub913_find_format(format->format.code); + if (!finfo) { + finfo = &ub913_formats[0]; + format->format.code = finfo->incode; + } + /* Set sink format */ fmt = v4l2_subdev_state_get_stream_format(state, format->pad, format->stream); @@ -378,12 +431,14 @@ static int ub913_set_fmt(struct v4l2_subdev *sd, *fmt = format->format; - /* Propagate to source format */ + /* Propagate to source format, and adjust the mbus code */ fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad, format->stream); if (!fmt) return -EINVAL; + format->format.code = finfo->outcode; + *fmt = format->format; return 0; @@ -607,7 +662,7 @@ static int ub913_add_i2c_adapter(struct ub913_data *priv) return 0; ret = i2c_atr_add_adapter(priv->plat_data->atr, priv->plat_data->port, - i2c_handle); + dev, i2c_handle); fwnode_handle_put(i2c_handle); diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c index 738652f2294b..6efe1460c976 100644 --- a/drivers/media/i2c/ds90ub953.c +++ b/drivers/media/i2c/ds90ub953.c @@ -146,8 +146,6 @@ struct ub953_data { struct v4l2_subdev *source_sd; u16 source_sd_pad; - struct v4l2_ctrl_handler ctrl_handler; - u64 enabled_source_streams; /* lock for register access */ @@ -229,8 +227,8 @@ static int ub953_select_ind_reg_block(struct ub953_data *priv, u8 block) return 0; } -__maybe_unused static int ub953_read_ind(struct ub953_data *priv, u8 block, - u8 reg, u8 *val) +__maybe_unused +static int ub953_read_ind(struct ub953_data *priv, u8 block, u8 reg, u8 *val) { unsigned int v; int ret; @@ -265,6 +263,7 @@ __maybe_unused static int ub953_read_ind(struct ub953_data *priv, u8 block, return ret; } +__maybe_unused static int ub953_write_ind(struct ub953_data *priv, u8 block, u8 reg, u8 val) { int ret; @@ -273,14 +272,14 @@ static int ub953_write_ind(struct ub953_data *priv, u8 block, u8 reg, u8 val) ret = ub953_select_ind_reg_block(priv, block); if (ret) - goto out_unlock; + goto out; ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); if (ret) { dev_err(&priv->client->dev, "Write to IND_ACC_ADDR failed when writing %u:%x02x: %d\n", block, reg, ret); - goto out_unlock; + goto out; } ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val); @@ -290,39 +289,7 @@ static int ub953_write_ind(struct ub953_data *priv, u8 block, u8 reg, u8 val) block, reg, ret); } -out_unlock: - mutex_unlock(&priv->reg_lock); - - return ret; -} - -static int ub953_write_ind16(struct ub953_data *priv, u8 block, u8 reg, u16 val) -{ - int ret; - - mutex_lock(&priv->reg_lock); - - ret = ub953_select_ind_reg_block(priv, block); - if (ret) - goto out_unlock; - - ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg); - if (ret) - goto out_unlock; - - ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val >> 8); - if (ret) - goto out_unlock; - - ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_ADDR, reg + 1); - if (ret) - goto out_unlock; - - ret = regmap_write(priv->regmap, UB953_REG_IND_ACC_DATA, val & 0xff); - if (ret) - goto out_unlock; - -out_unlock: +out: mutex_unlock(&priv->reg_lock); return ret; @@ -754,124 +721,6 @@ static const struct media_entity_operations ub953_entity_ops = { .link_validate = v4l2_subdev_link_validate, }; -enum { - TEST_PATTERN_DISABLED = 0, - TEST_PATTERN_V_COLOR_BARS_1, - TEST_PATTERN_V_COLOR_BARS_2, - TEST_PATTERN_V_COLOR_BARS_4, - TEST_PATTERN_V_COLOR_BARS_8, -}; - -static const char *const ub953_tpg_qmenu[] = { - "Disabled", - "1 vertical color bar", - "2 vertical color bars", - "4 vertical color bars", - "8 vertical color bars", -}; - -static int ub953_enable_tpg(struct ub953_data *priv, int tpg_num) -{ - struct v4l2_subdev *sd = &priv->sd; - struct v4l2_subdev_state *state; - struct v4l2_mbus_framefmt *fmt; - u8 vbp, vfp; - u16 blank_lines; - u16 width; - u16 height; - - u16 bytespp = 2; /* For MEDIA_BUS_FMT_UYVY8_1X16 */ - u8 cbars_idx = tpg_num - TEST_PATTERN_V_COLOR_BARS_1; - u8 num_cbars = 1 << cbars_idx; - - u16 line_size; /* Line size [bytes] */ - u16 bar_size; /* cbar size [bytes] */ - u16 act_lpf; /* active lines/frame */ - u16 tot_lpf; /* tot lines/frame */ - u16 line_pd; /* Line period in 10-ns units */ - - u16 fps = 30; - - vbp = 33; - vfp = 10; - blank_lines = vbp + vfp + 2; /* total blanking lines */ - - state = v4l2_subdev_get_locked_active_state(sd); - - if (state->routing.num_routes != 1) - return -EINVAL; - - fmt = v4l2_subdev_state_get_stream_format(state, UB953_PAD_SOURCE, 0); - if (!fmt) - return -EINVAL; - - if (fmt->code != MEDIA_BUS_FMT_UYVY8_1X16) - return -EINVAL; - - width = fmt->width; - height = fmt->height; - - line_size = width * bytespp; - bar_size = line_size / num_cbars; - act_lpf = height; - tot_lpf = act_lpf + blank_lines; - line_pd = 100000000 / fps / tot_lpf; - - ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CTL, - UB953_IND_PGEN_CTL_PGEN_ENABLE); - - /* YUV422 8bit: 2 bytes/block, CSI-2 data type 0x1e */ - ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CFG, - cbars_idx << 4 | 0x2); - ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CSI_DI, - 0x1e); - - ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, - UB953_IND_PGEN_LINE_SIZE1, line_size); - ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, - UB953_IND_PGEN_BAR_SIZE1, bar_size); - ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, - UB953_IND_PGEN_ACT_LPF1, act_lpf); - ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, - UB953_IND_PGEN_TOT_LPF1, tot_lpf); - ub953_write_ind16(priv, UB953_IND_TARGET_PAT_GEN, - UB953_IND_PGEN_LINE_PD1, line_pd); - ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_VBP, - vbp); - ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_VFP, - vfp); - - return 0; -} - -static void ub953_disable_tpg(struct ub953_data *priv) -{ - ub953_write_ind(priv, UB953_IND_TARGET_PAT_GEN, UB953_IND_PGEN_CTL, - 0x0); -} - -static int ub953_s_ctrl(struct v4l2_ctrl *ctrl) -{ - struct ub953_data *priv = - container_of(ctrl->handler, struct ub953_data, ctrl_handler); - int ret = 0; - - switch (ctrl->id) { - case V4L2_CID_TEST_PATTERN: - if (ctrl->val == 0) - ub953_disable_tpg(priv); - else - ret = ub953_enable_tpg(priv, ctrl->val); - break; - } - - return ret; -} - -static const struct v4l2_ctrl_ops ub953_ctrl_ops = { - .s_ctrl = ub953_s_ctrl, -}; - static int ub953_notify_bound(struct v4l2_async_notifier *notifier, struct v4l2_subdev *source_subdev, struct v4l2_async_subdev *asd) @@ -1241,7 +1090,7 @@ static int ub953_add_i2c_adapter(struct ub953_data *priv) return 0; ret = i2c_atr_add_adapter(priv->plat_data->atr, priv->plat_data->port, - i2c_handle); + dev, i2c_handle); fwnode_handle_put(i2c_handle); @@ -1360,20 +1209,6 @@ static int ub953_subdev_init(struct ub953_data *priv) v4l2_i2c_subdev_init(&priv->sd, priv->client, &ub953_subdev_ops); - v4l2_ctrl_handler_init(&priv->ctrl_handler, 1); - priv->sd.ctrl_handler = &priv->ctrl_handler; - - v4l2_ctrl_new_std_menu_items(&priv->ctrl_handler, &ub953_ctrl_ops, - V4L2_CID_TEST_PATTERN, - ARRAY_SIZE(ub953_tpg_qmenu) - 1, 0, 0, - ub953_tpg_qmenu); - - if (priv->ctrl_handler.error) { - ret = priv->ctrl_handler.error; - dev_err_probe(dev, ret, "Failed to set up v4l2 controls\n"); - goto err_remove_ctrls; - } - priv->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS | V4L2_SUBDEV_FL_STREAMS; priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; @@ -1383,10 +1218,8 @@ static int ub953_subdev_init(struct ub953_data *priv) priv->pads[1].flags = MEDIA_PAD_FL_SOURCE; ret = media_entity_pads_init(&priv->sd.entity, 2, priv->pads); - if (ret) { - dev_err_probe(dev, ret, "Failed to init pads\n"); - goto err_remove_ctrls; - } + if (ret) + return dev_err_probe(dev, ret, "Failed to init pads\n"); priv->sd.fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), UB953_PAD_SOURCE, 0, @@ -1397,8 +1230,6 @@ static int ub953_subdev_init(struct ub953_data *priv) goto err_entity_cleanup; } - priv->sd.state_lock = priv->sd.ctrl_handler->lock; - ret = v4l2_subdev_init_finalize(&priv->sd); if (ret) goto err_fwnode_put; @@ -1426,8 +1257,6 @@ static int ub953_subdev_init(struct ub953_data *priv) fwnode_handle_put(priv->sd.fwnode); err_entity_cleanup: media_entity_cleanup(&priv->sd.entity); -err_remove_ctrls: - v4l2_ctrl_handler_free(&priv->ctrl_handler); return ret; } @@ -1439,7 +1268,6 @@ static void ub953_subdev_uninit(struct ub953_data *priv) v4l2_subdev_cleanup(&priv->sd); fwnode_handle_put(priv->sd.fwnode); media_entity_cleanup(&priv->sd.entity); - v4l2_ctrl_handler_free(&priv->ctrl_handler); } static int ub953_probe(struct i2c_client *client) diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c index eb391f0259b3..1ae0c7cda7c7 100644 --- a/drivers/media/i2c/ds90ub960.c +++ b/drivers/media/i2c/ds90ub960.c @@ -6,6 +6,26 @@ * Copyright (c) 2023 Tomi Valkeinen */ +/* + * (Possible) TODOs + * + * - PM for serializer and remote peripherals. We need to manage: + * - VPOC + * - Power domain? Regulator? Somehow any remote device should be able to + * cause the VPOC to be turned on. + * - Link between the deserializer and the serializer + * - Related to VPOC management. We probably always want to turn on the VPOC + * and then enable the link. + * - Serializer's services: i2c, gpios, power + * - The serializer needs to resume before the remote peripherals can + * e.g. use the i2c. + * - How to handle gpios? Reserving a gpio essentially keeps the provider + * (serializer) always powered on. + * - Do we need a new bus for the FPD-Link? At the moment the serializers + * are children of the same i2c-adapter where the deserializer resides. + * - i2c-atr could be made embeddable instead of allocatable. + */ + #include #include #include @@ -26,8 +46,10 @@ #include #include +#include #include #include +#include #include #define MHZ(v) ((u32)((v) * 1000000U)) @@ -39,7 +61,6 @@ #define UB960_MAX_NPORTS (UB960_MAX_RX_NPORTS + UB960_MAX_TX_NPORTS) #define UB960_MAX_PORT_ALIASES 8 -#define UB960_MAX_POOL_ALIASES (UB960_MAX_RX_NPORTS * UB960_MAX_PORT_ALIASES) #define UB960_NUM_BC_GPIOS 4 @@ -47,13 +68,13 @@ * Register map * * 0x00-0x32 Shared (UB960_SR) - * 0x33-0x3A CSI-2 TX (per-port paged on DS90UB960, shared on 954) (UB960_TR) - * 0x4C Shared (UB960_SR) - * 0x4D-0x7F FPD-Link RX, per-port paged (UB960_RR) - * 0xB0-0xBF Shared (UB960_SR) - * 0xD0-0xDF FPD-Link RX, per-port paged (UB960_RR) - * 0xF0-0xF5 Shared (UB960_SR) - * 0xF8-0xFB Shared (UB960_SR) + * 0x33-0x3a CSI-2 TX (per-port paged on DS90UB960, shared on 954) (UB960_TR) + * 0x4c Shared (UB960_SR) + * 0x4d-0x7f FPD-Link RX, per-port paged (UB960_RR) + * 0xb0-0xbf Shared (UB960_SR) + * 0xd0-0xdf FPD-Link RX, per-port paged (UB960_RR) + * 0xf0-0xf5 Shared (UB960_SR) + * 0xf8-0xfb Shared (UB960_SR) * All others Reserved * * Register prefixes: @@ -78,12 +99,12 @@ #define UB960_SR_BCC_WDOG_CTL 0x07 #define UB960_SR_I2C_CTL1 0x08 #define UB960_SR_I2C_CTL2 0x09 -#define UB960_SR_SCL_HIGH_TIME 0x0A -#define UB960_SR_SCL_LOW_TIME 0x0B -#define UB960_SR_RX_PORT_CTL 0x0C -#define UB960_SR_IO_CTL 0x0D -#define UB960_SR_GPIO_PIN_STS 0x0E -#define UB960_SR_GPIO_INPUT_CTL 0x0F +#define UB960_SR_SCL_HIGH_TIME 0x0a +#define UB960_SR_SCL_LOW_TIME 0x0b +#define UB960_SR_RX_PORT_CTL 0x0c +#define UB960_SR_IO_CTL 0x0d +#define UB960_SR_GPIO_PIN_STS 0x0e +#define UB960_SR_GPIO_INPUT_CTL 0x0f #define UB960_SR_GPIO_PIN_CTL(n) (0x10 + (n)) /* n < UB960_NUM_GPIOS */ #define UB960_SR_GPIO_PIN_CTL_GPIO_OUT_SEL 5 #define UB960_SR_GPIO_PIN_CTL_GPIO_OUT_SRC_SHIFT 2 @@ -91,12 +112,12 @@ #define UB960_SR_FS_CTL 0x18 #define UB960_SR_FS_HIGH_TIME_1 0x19 -#define UB960_SR_FS_HIGH_TIME_0 0x1A -#define UB960_SR_FS_LOW_TIME_1 0x1B -#define UB960_SR_FS_LOW_TIME_0 0x1C -#define UB960_SR_MAX_FRM_HI 0x1D -#define UB960_SR_MAX_FRM_LO 0x1E -#define UB960_SR_CSI_PLL_CTL 0x1F +#define UB960_SR_FS_HIGH_TIME_0 0x1a +#define UB960_SR_FS_LOW_TIME_1 0x1b +#define UB960_SR_FS_LOW_TIME_0 0x1c +#define UB960_SR_MAX_FRM_HI 0x1d +#define UB960_SR_MAX_FRM_LO 0x1e +#define UB960_SR_CSI_PLL_CTL 0x1f #define UB960_SR_FWD_CTL1 0x20 #define UB960_SR_FWD_CTL1_PORT_DIS(n) BIT((n) + 4) @@ -108,7 +129,6 @@ #define UB960_SR_INTERRUPT_CTL_INT_EN BIT(7) #define UB960_SR_INTERRUPT_CTL_IE_CSI_TX0 BIT(4) #define UB960_SR_INTERRUPT_CTL_IE_RX(n) BIT((n)) /* rxport[n] IRQ */ -#define UB960_SR_INTERRUPT_CTL_ALL 0x83 /* TODO 0x93 to enable CSI */ #define UB960_SR_INTERRUPT_STS 0x24 #define UB960_SR_INTERRUPT_STS_INT BIT(7) @@ -120,10 +140,10 @@ #define UB960_SR_TS_LINE_HI 0x27 #define UB960_SR_TS_LINE_LO 0x28 #define UB960_SR_TS_STATUS 0x29 -#define UB960_SR_TIMESTAMP_P0_HI 0x2A -#define UB960_SR_TIMESTAMP_P0_LO 0x2B -#define UB960_SR_TIMESTAMP_P1_HI 0x2C -#define UB960_SR_TIMESTAMP_P1_LO 0x2D +#define UB960_SR_TIMESTAMP_P0_HI 0x2a +#define UB960_SR_TIMESTAMP_P0_LO 0x2b +#define UB960_SR_TIMESTAMP_P1_HI 0x2c +#define UB960_SR_TIMESTAMP_P1_LO 0x2d #define UB960_SR_CSI_PORT_SEL 0x32 @@ -141,7 +161,7 @@ #define UB960_TR_CSI_TEST_CTL 0x38 #define UB960_TR_CSI_TEST_PATT_HI 0x39 -#define UB960_TR_CSI_TEST_PATT_LO 0x3A +#define UB960_TR_CSI_TEST_PATT_LO 0x3a #define UB960_XR_SFILTER_CFG 0x41 #define UB960_XR_SFILTER_CFG_SFILTER_MAX_SHIFT 4 @@ -172,13 +192,13 @@ UB960_RR_BCC_STATUS_MASTER_TO | UB960_RR_BCC_STATUS_SLAVE_ERR | \ UB960_RR_BCC_STATUS_SLAVE_TO | UB960_RR_BCC_STATUS_RESP_ERR) -#define UB960_RR_FPD3_CAP 0x4A -#define UB960_RR_RAW_EMBED_DTYPE 0x4B +#define UB960_RR_FPD3_CAP 0x4a +#define UB960_RR_RAW_EMBED_DTYPE 0x4b #define UB960_RR_RAW_EMBED_DTYPE_LINES_SHIFT 6 -#define UB960_SR_FPD3_PORT_SEL 0x4C +#define UB960_SR_FPD3_PORT_SEL 0x4c -#define UB960_RR_RX_PORT_STS1 0x4D +#define UB960_RR_RX_PORT_STS1 0x4d #define UB960_RR_RX_PORT_STS1_BCC_CRC_ERROR BIT(5) #define UB960_RR_RX_PORT_STS1_LOCK_STS_CHG BIT(4) #define UB960_RR_RX_PORT_STS1_BCC_SEQ_ERROR BIT(3) @@ -190,7 +210,7 @@ UB960_RR_RX_PORT_STS1_BCC_SEQ_ERROR | \ UB960_RR_RX_PORT_STS1_PARITY_ERROR) -#define UB960_RR_RX_PORT_STS2 0x4E +#define UB960_RR_RX_PORT_STS2 0x4e #define UB960_RR_RX_PORT_STS2_LINE_LEN_UNSTABLE BIT(7) #define UB960_RR_RX_PORT_STS2_LINE_LEN_CHG BIT(6) #define UB960_RR_RX_PORT_STS2_FPD3_ENCODE_ERROR BIT(5) @@ -202,7 +222,7 @@ #define UB960_RR_RX_PORT_STS2_ERROR_MASK \ UB960_RR_RX_PORT_STS2_BUFFER_ERROR -#define UB960_RR_RX_FREQ_HIGH 0x4F +#define UB960_RR_RX_FREQ_HIGH 0x4f #define UB960_RR_RX_FREQ_LOW 0x50 #define UB960_RR_SENSOR_STS_0 0x51 #define UB960_RR_SENSOR_STS_1 0x52 @@ -217,18 +237,18 @@ #define UB960_RR_BCC_CONFIG_BC_FREQ_SEL_MASK GENMASK(2, 0) #define UB960_RR_DATAPATH_CTL1 0x59 -#define UB960_RR_DATAPATH_CTL2 0x5A -#define UB960_RR_SER_ID 0x5B -#define UB960_RR_SER_ALIAS_ID 0x5C +#define UB960_RR_DATAPATH_CTL2 0x5a +#define UB960_RR_SER_ID 0x5b +#define UB960_RR_SER_ALIAS_ID 0x5c /* For these two register sets: n < UB960_MAX_PORT_ALIASES */ -#define UB960_RR_SLAVE_ID(n) (0x5D + (n)) +#define UB960_RR_SLAVE_ID(n) (0x5d + (n)) #define UB960_RR_SLAVE_ALIAS(n) (0x65 + (n)) -#define UB960_RR_PORT_CONFIG 0x6D +#define UB960_RR_PORT_CONFIG 0x6d #define UB960_RR_PORT_CONFIG_FPD3_MODE_MASK GENMASK(1, 0) -#define UB960_RR_BC_GPIO_CTL(n) (0x6E + (n)) /* n < 2 */ +#define UB960_RR_BC_GPIO_CTL(n) (0x6e + (n)) /* n < 2 */ #define UB960_RR_RAW10_ID 0x70 #define UB960_RR_RAW10_ID_VC_SHIFT 6 #define UB960_RR_RAW10_ID_DT_SHIFT 0 @@ -245,7 +265,7 @@ #define UB960_RR_MAILBOX_1 0x78 #define UB960_RR_MAILBOX_2 0x79 -#define UB960_RR_CSI_RX_STS 0x7A +#define UB960_RR_CSI_RX_STS 0x7a #define UB960_RR_CSI_RX_STS_LENGTH_ERR BIT(3) #define UB960_RR_CSI_RX_STS_CKSUM_ERR BIT(2) #define UB960_RR_CSI_RX_STS_ECC2_ERR BIT(1) @@ -254,17 +274,17 @@ (UB960_RR_CSI_RX_STS_LENGTH_ERR | UB960_RR_CSI_RX_STS_CKSUM_ERR | \ UB960_RR_CSI_RX_STS_ECC2_ERR | UB960_RR_CSI_RX_STS_ECC1_ERR) -#define UB960_RR_CSI_ERR_COUNTER 0x7B -#define UB960_RR_PORT_CONFIG2 0x7C +#define UB960_RR_CSI_ERR_COUNTER 0x7b +#define UB960_RR_PORT_CONFIG2 0x7c #define UB960_RR_PORT_CONFIG2_RAW10_8BIT_CTL_MASK GENMASK(7, 6) #define UB960_RR_PORT_CONFIG2_RAW10_8BIT_CTL_SHIFT 6 #define UB960_RR_PORT_CONFIG2_LV_POL_LOW BIT(1) #define UB960_RR_PORT_CONFIG2_FV_POL_LOW BIT(0) -#define UB960_RR_PORT_PASS_CTL 0x7D -#define UB960_RR_SEN_INT_RISE_CTL 0x7E -#define UB960_RR_SEN_INT_FALL_CTL 0x7F +#define UB960_RR_PORT_PASS_CTL 0x7d +#define UB960_RR_SEN_INT_RISE_CTL 0x7e +#define UB960_RR_SEN_INT_FALL_CTL 0x7f #define UB960_SR_CSI_FRAME_COUNT_HI(n) (0x90 + 8 * (n)) #define UB960_SR_CSI_FRAME_COUNT_LO(n) (0x91 + 8 * (n)) @@ -275,60 +295,60 @@ #define UB960_SR_CSI_LINE_ERR_COUNT_HI(n) (0x96 + 8 * (n)) #define UB960_SR_CSI_LINE_ERR_COUNT_LO(n) (0x97 + 8 * (n)) -#define UB960_XR_REFCLK_FREQ 0xA5 /* UB960 */ +#define UB960_XR_REFCLK_FREQ 0xa5 /* UB960 */ #define UB960_RR_VC_ID_MAP(x) (0xa0 + (x)) /* UB9702 */ -#define UB960_SR_IND_ACC_CTL 0xB0 +#define UB960_SR_IND_ACC_CTL 0xb0 #define UB960_SR_IND_ACC_CTL_IA_AUTO_INC BIT(1) -#define UB960_SR_IND_ACC_ADDR 0xB1 -#define UB960_SR_IND_ACC_DATA 0xB2 -#define UB960_SR_BIST_CONTROL 0xB3 -#define UB960_SR_MODE_IDX_STS 0xB8 -#define UB960_SR_LINK_ERROR_COUNT 0xB9 -#define UB960_SR_FPD3_ENC_CTL 0xBA -#define UB960_SR_FV_MIN_TIME 0xBC -#define UB960_SR_GPIO_PD_CTL 0xBE +#define UB960_SR_IND_ACC_ADDR 0xb1 +#define UB960_SR_IND_ACC_DATA 0xb2 +#define UB960_SR_BIST_CONTROL 0xb3 +#define UB960_SR_MODE_IDX_STS 0xb8 +#define UB960_SR_LINK_ERROR_COUNT 0xb9 +#define UB960_SR_FPD3_ENC_CTL 0xba +#define UB960_SR_FV_MIN_TIME 0xbc +#define UB960_SR_GPIO_PD_CTL 0xbe #define UB960_SR_FPD_RATE_CFG 0xc2 /* UB9702 */ #define UB960_SR_CSI_PLL_DIV 0xc9 /* UB9702 */ -#define UB960_RR_PORT_DEBUG 0xD0 -#define UB960_RR_AEQ_CTL2 0xD2 +#define UB960_RR_PORT_DEBUG 0xd0 +#define UB960_RR_AEQ_CTL2 0xd2 #define UB960_RR_AEQ_CTL2_SET_AEQ_FLOOR BIT(2) -#define UB960_RR_AEQ_STATUS 0xD3 +#define UB960_RR_AEQ_STATUS 0xd3 #define UB960_RR_AEQ_STATUS_STATUS_2 GENMASK(5, 3) #define UB960_RR_AEQ_STATUS_STATUS_1 GENMASK(2, 0) -#define UB960_RR_AEQ_BYPASS 0xD4 +#define UB960_RR_AEQ_BYPASS 0xd4 #define UB960_RR_AEQ_BYPASS_EQ_STAGE1_VALUE_SHIFT 5 #define UB960_RR_AEQ_BYPASS_EQ_STAGE1_VALUE_MASK GENMASK(7, 5) #define UB960_RR_AEQ_BYPASS_EQ_STAGE2_VALUE_SHIFT 1 #define UB960_RR_AEQ_BYPASS_EQ_STAGE2_VALUE_MASK GENMASK(3, 1) #define UB960_RR_AEQ_BYPASS_ENABLE BIT(0) -#define UB960_RR_AEQ_MIN_MAX 0xD5 +#define UB960_RR_AEQ_MIN_MAX 0xd5 #define UB960_RR_AEQ_MIN_MAX_AEQ_MAX_SHIFT 4 #define UB960_RR_AEQ_MIN_MAX_AEQ_FLOOR_SHIFT 0 -#define UB960_RR_SFILTER_STS_0 0xD6 -#define UB960_RR_SFILTER_STS_1 0xD7 -#define UB960_RR_PORT_ICR_HI 0xD8 -#define UB960_RR_PORT_ICR_LO 0xD9 -#define UB960_RR_PORT_ISR_HI 0xDA -#define UB960_RR_PORT_ISR_LO 0xDB -#define UB960_RR_FC_GPIO_STS 0xDC -#define UB960_RR_FC_GPIO_ICR 0xDD -#define UB960_RR_SEN_INT_RISE_STS 0xDE -#define UB960_RR_SEN_INT_FALL_STS 0xDF +#define UB960_RR_SFILTER_STS_0 0xd6 +#define UB960_RR_SFILTER_STS_1 0xd7 +#define UB960_RR_PORT_ICR_HI 0xd8 +#define UB960_RR_PORT_ICR_LO 0xd9 +#define UB960_RR_PORT_ISR_HI 0xda +#define UB960_RR_PORT_ISR_LO 0xdb +#define UB960_RR_FC_GPIO_STS 0xdc +#define UB960_RR_FC_GPIO_ICR 0xdd +#define UB960_RR_SEN_INT_RISE_STS 0xde +#define UB960_RR_SEN_INT_FALL_STS 0xdf #define UB960_RR_CHANNEL_MODE 0xe4 /* UB9702 */ -#define UB960_SR_FPD3_RX_ID(n) (0xF0 + (n)) +#define UB960_SR_FPD3_RX_ID(n) (0xf0 + (n)) -#define UB960_SR_I2C_RX_ID(n) (0xF8 + (n)) /* < UB960_FPD_RX_NPORTS */ +#define UB960_SR_I2C_RX_ID(n) (0xf8 + (n)) /* < UB960_FPD_RX_NPORTS */ /* Indirect register blocks */ #define UB960_IND_TARGET_PAT_GEN 0x00 @@ -349,12 +369,12 @@ #define UB960_IR_PGEN_BAR_SIZE0 0x07 #define UB960_IR_PGEN_ACT_LPF1 0x08 #define UB960_IR_PGEN_ACT_LPF0 0x09 -#define UB960_IR_PGEN_TOT_LPF1 0x0A -#define UB960_IR_PGEN_TOT_LPF0 0x0B -#define UB960_IR_PGEN_LINE_PD1 0x0C -#define UB960_IR_PGEN_LINE_PD0 0x0D -#define UB960_IR_PGEN_VBP 0x0E -#define UB960_IR_PGEN_VFP 0x0F +#define UB960_IR_PGEN_TOT_LPF1 0x0a +#define UB960_IR_PGEN_TOT_LPF0 0x0b +#define UB960_IR_PGEN_LINE_PD1 0x0c +#define UB960_IR_PGEN_LINE_PD0 0x0d +#define UB960_IR_PGEN_VBP 0x0e +#define UB960_IR_PGEN_VFP 0x0f #define UB960_IR_PGEN_COLOR(n) (0x10 + (n)) /* n < 15 */ #define UB960_IR_RX_ANA_STROBE_SET_CLK 0x08 @@ -368,16 +388,16 @@ /* EQ related */ #define UB960_MIN_AEQ_STROBE_POS -7 -#define UB960_MAX_AEQ_STROBE_POS 7 +#define UB960_MAX_AEQ_STROBE_POS 7 #define UB960_MANUAL_STROBE_EXTRA_DELAY 6 #define UB960_MIN_MANUAL_STROBE_POS -(7 + UB960_MANUAL_STROBE_EXTRA_DELAY) -#define UB960_MAX_MANUAL_STROBE_POS (7 + UB960_MANUAL_STROBE_EXTRA_DELAY) -#define UB960_NUM_MANUAL_STROBE_POS (UB960_MAX_MANUAL_STROBE_POS - UB960_MIN_MANUAL_STROBE_POS + 1) +#define UB960_MAX_MANUAL_STROBE_POS (7 + UB960_MANUAL_STROBE_EXTRA_DELAY) +#define UB960_NUM_MANUAL_STROBE_POS (UB960_MAX_MANUAL_STROBE_POS - UB960_MIN_MANUAL_STROBE_POS + 1) -#define UB960_MIN_EQ_LEVEL 0 -#define UB960_MAX_EQ_LEVEL 14 +#define UB960_MIN_EQ_LEVEL 0 +#define UB960_MAX_EQ_LEVEL 14 #define UB960_NUM_EQ_LEVELS (UB960_MAX_EQ_LEVEL - UB960_MIN_EQ_LEVEL + 1) struct ub960_hw_data { @@ -407,17 +427,23 @@ struct ub960_rxport { struct ub960_data *priv; u8 nport; /* RX port number, and index in priv->rxport[] */ - struct v4l2_subdev *source_sd; /* Connected subdev */ - u16 source_sd_pad; - struct fwnode_handle *source_ep_fwnode; + struct { + struct v4l2_subdev *sd; + u16 pad; + struct fwnode_handle *ep_fwnode; + } source; + + /* Serializer */ + struct { + struct fwnode_handle *fwnode; + struct i2c_client *client; + unsigned short alias; /* I2C alias (lower 7 bits) */ + struct ds90ub9xx_platform_data pdata; + } ser; enum ub960_rxport_mode rx_mode; enum ub960_rxport_cdr cdr_mode; - struct fwnode_handle *remote_fwnode; /* 'serializer' fwnode */ - struct i2c_client *ser_client; /* Serializer */ - unsigned short ser_alias; /* Serializer i2c alias (lower 7 bits) */ - u8 lv_fv_pol; /* LV and FV polarities */ struct regulator *vpoc; @@ -439,8 +465,6 @@ struct ub960_rxport { } manual; }; } eq; - - struct ds90ub9xx_platform_data ser_platform_data; }; struct ub960_asd { @@ -463,20 +487,12 @@ struct ub960_txport { struct atr_alias_table_entry { u16 alias_id; /* Alias ID from DT */ - bool reserved; + bool in_use; u8 nport; u8 slave_id; /* i2c client's local i2c address */ u8 port_reg_idx; }; -struct atr_alias_table { - /* Protects fields in this struct */ - struct mutex lock; - - size_t num_entries; - struct atr_alias_table_entry *entries; -}; - struct ub960_data { const struct ub960_hw_data *hw_data; struct i2c_client *client; /* for shared local registers */ @@ -491,7 +507,6 @@ struct ub960_data { struct gpio_desc *pd_gpio; struct delayed_work poll_work; - struct i2c_atr *atr; struct ub960_rxport *rxports[UB960_MAX_RX_NPORTS]; struct ub960_txport *txports[UB960_MAX_TX_NPORTS]; @@ -504,15 +519,20 @@ struct ub960_data { u32 tx_data_rate; /* Nominal data rate (Gb/s) */ s64 tx_link_freq[1]; - struct atr_alias_table atr_alias_table; - - u8 current_read_rxport; - u8 current_write_rxport_mask; + struct { + struct i2c_atr *atr; - u8 current_read_csiport; - u8 current_write_csiport_mask; + /* Protects fields below in this struct */ + struct mutex lock; + size_t num_aliases; + struct atr_alias_table_entry *aliases; + } atr; - u8 current_indirect_target; + struct { + u8 rxport; + u8 txport; + u8 indirect_target; + } reg_current; bool streaming; @@ -529,29 +549,11 @@ struct ub960_data { } strobe; }; -static void ub960_reset(struct ub960_data *priv, bool reset_regs); - static inline struct ub960_data *sd_to_ub960(struct v4l2_subdev *sd) { return container_of(sd, struct ub960_data, sd); } -enum { - TEST_PATTERN_DISABLED = 0, - TEST_PATTERN_V_COLOR_BARS_1, - TEST_PATTERN_V_COLOR_BARS_2, - TEST_PATTERN_V_COLOR_BARS_4, - TEST_PATTERN_V_COLOR_BARS_8, -}; - -static const char *const ub960_tpg_qmenu[] = { - "Disabled", - "1 vertical color bar", - "2 vertical color bars", - "4 vertical color bars", - "8 vertical color bars", -}; - static inline bool ub960_pad_is_sink(struct ub960_data *priv, u32 pad) { return pad < priv->hw_data->num_rxports; @@ -559,8 +561,7 @@ static inline bool ub960_pad_is_sink(struct ub960_data *priv, u32 pad) static inline bool ub960_pad_is_source(struct ub960_data *priv, u32 pad) { - return pad >= priv->hw_data->num_rxports && - pad < (priv->hw_data->num_rxports + priv->hw_data->num_txports); + return pad >= priv->hw_data->num_rxports; } static inline unsigned int ub960_pad_to_port(struct ub960_data *priv, u32 pad) @@ -579,20 +580,15 @@ struct ub960_format_info { }; static const struct ub960_format_info ub960_formats[] = { - { .code = MEDIA_BUS_FMT_YUYV8_1X16, .bpp = 16, .datatype = 0x1e, }, - { .code = MEDIA_BUS_FMT_UYVY8_1X16, .bpp = 16, .datatype = 0x1e, }, - { .code = MEDIA_BUS_FMT_VYUY8_1X16, .bpp = 16, .datatype = 0x1e, }, - { .code = MEDIA_BUS_FMT_YVYU8_1X16, .bpp = 16, .datatype = 0x1e, }, - - /* Legacy */ - { .code = MEDIA_BUS_FMT_YUYV8_2X8, .bpp = 16, .datatype = 0x1e, }, - { .code = MEDIA_BUS_FMT_UYVY8_2X8, .bpp = 16, .datatype = 0x1e, }, - { .code = MEDIA_BUS_FMT_VYUY8_2X8, .bpp = 16, .datatype = 0x1e, }, - { .code = MEDIA_BUS_FMT_YVYU8_2X8, .bpp = 16, .datatype = 0x1e, }, - - /* RAW */ - { .code = MEDIA_BUS_FMT_SBGGR12_1X12, .bpp = 12, .datatype = 0x2c, }, - { .code = MEDIA_BUS_FMT_SRGGB12_1X12, .bpp = 12, .datatype = 0x2c, }, + { .code = MEDIA_BUS_FMT_YUYV8_1X16, .bpp = 16, .datatype = MIPI_CSI2_DT_YUV422_8B, }, + { .code = MEDIA_BUS_FMT_UYVY8_1X16, .bpp = 16, .datatype = MIPI_CSI2_DT_YUV422_8B, }, + { .code = MEDIA_BUS_FMT_VYUY8_1X16, .bpp = 16, .datatype = MIPI_CSI2_DT_YUV422_8B, }, + { .code = MEDIA_BUS_FMT_YVYU8_1X16, .bpp = 16, .datatype = MIPI_CSI2_DT_YUV422_8B, }, + + { .code = MEDIA_BUS_FMT_SBGGR12_1X12, .bpp = 12, .datatype = MIPI_CSI2_DT_RAW12, }, + { .code = MEDIA_BUS_FMT_SGBRG12_1X12, .bpp = 12, .datatype = MIPI_CSI2_DT_RAW12, }, + { .code = MEDIA_BUS_FMT_SGRBG12_1X12, .bpp = 12, .datatype = MIPI_CSI2_DT_RAW12, }, + { .code = MEDIA_BUS_FMT_SRGGB12_1X12, .bpp = 12, .datatype = MIPI_CSI2_DT_RAW12, }, }; static const struct ub960_format_info *ub960_find_format(u32 code) @@ -668,13 +664,44 @@ static int ub960_update_bits(struct ub960_data *priv, u8 reg, u8 mask, u8 val) return ret; } -static int _ub960_rxport_select(struct ub960_data *priv, u8 nport) +static int ub960_read16(struct ub960_data *priv, u8 reg, u16 *val) +{ + struct device *dev = &priv->client->dev; + unsigned int v1, v2; + int ret; + + mutex_lock(&priv->reg_lock); + + ret = regmap_read(priv->regmap, reg, &v1); + if (ret) { + dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n", + __func__, reg, ret); + goto out_unlock; + } + + ret = regmap_read(priv->regmap, reg + 1, &v2); + if (ret) { + dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n", + __func__, reg + 1, ret); + goto out_unlock; + } + + *val = (v1 << 8) | v2; + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub960_rxport_select(struct ub960_data *priv, u8 nport) { struct device *dev = &priv->client->dev; int ret; - if (priv->current_read_rxport == nport && - priv->current_write_rxport_mask == BIT(nport)) + lockdep_assert_held(&priv->reg_lock); + + if (priv->reg_current.rxport == nport) return 0; ret = regmap_write(priv->regmap, UB960_SR_FPD3_PORT_SEL, @@ -685,8 +712,7 @@ static int _ub960_rxport_select(struct ub960_data *priv, u8 nport) return ret; } - priv->current_read_rxport = nport; - priv->current_write_rxport_mask = BIT(nport); + priv->reg_current.rxport = nport; return 0; } @@ -699,7 +725,9 @@ static int ub960_rxport_read(struct ub960_data *priv, u8 nport, u8 reg, u8 *val) mutex_lock(&priv->reg_lock); - _ub960_rxport_select(priv, nport); + ret = ub960_rxport_select(priv, nport); + if (ret) + goto out_unlock; ret = regmap_read(priv->regmap, reg, &v); if (ret) { @@ -723,13 +751,16 @@ static int ub960_rxport_write(struct ub960_data *priv, u8 nport, u8 reg, u8 val) mutex_lock(&priv->reg_lock); - _ub960_rxport_select(priv, nport); + ret = ub960_rxport_select(priv, nport); + if (ret) + goto out_unlock; ret = regmap_write(priv->regmap, reg, val); if (ret) dev_err(dev, "%s: cannot write register 0x%02x (%d)!\n", __func__, reg, ret); +out_unlock: mutex_unlock(&priv->reg_lock); return ret; @@ -743,43 +774,81 @@ static int ub960_rxport_update_bits(struct ub960_data *priv, u8 nport, u8 reg, mutex_lock(&priv->reg_lock); - _ub960_rxport_select(priv, nport); + ret = ub960_rxport_select(priv, nport); + if (ret) + goto out_unlock; ret = regmap_update_bits(priv->regmap, reg, mask, val); if (ret) dev_err(dev, "%s: cannot update register 0x%02x (%d)!\n", __func__, reg, ret); +out_unlock: mutex_unlock(&priv->reg_lock); return ret; } -static int _ub960_csiport_select(struct ub960_data *priv, u8 nport) +static int ub960_rxport_read16(struct ub960_data *priv, u8 nport, u8 reg, + u16 *val) { struct device *dev = &priv->client->dev; + unsigned int v1; + unsigned int v2; int ret; - if (priv->current_read_csiport == nport && - priv->current_write_csiport_mask == BIT(nport)) + mutex_lock(&priv->reg_lock); + + ret = ub960_rxport_select(priv, nport); + if (ret) + goto out_unlock; + + ret = regmap_read(priv->regmap, reg, &v1); + if (ret) { + dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n", + __func__, reg, ret); + goto out_unlock; + } + + ret = regmap_read(priv->regmap, reg + 1, &v2); + if (ret) { + dev_err(dev, "%s: cannot read register 0x%02x (%d)!\n", + __func__, reg + 1, ret); + goto out_unlock; + } + + *val = (v1 << 8) | v2; + +out_unlock: + mutex_unlock(&priv->reg_lock); + + return ret; +} + +static int ub960_txport_select(struct ub960_data *priv, u8 nport) +{ + struct device *dev = &priv->client->dev; + int ret; + + lockdep_assert_held(&priv->reg_lock); + + if (priv->reg_current.txport == nport) return 0; ret = regmap_write(priv->regmap, UB960_SR_CSI_PORT_SEL, (nport << 4) | BIT(nport)); if (ret) { - dev_err(dev, "%s: cannot select csi port %d (%d)!\n", __func__, + dev_err(dev, "%s: cannot select tx port %d (%d)!\n", __func__, nport, ret); return ret; } - priv->current_read_csiport = nport; - priv->current_write_csiport_mask = BIT(nport); + priv->reg_current.txport = nport; return 0; } -static int ub960_csiport_read(struct ub960_data *priv, u8 nport, u8 reg, - u8 *val) +static int ub960_txport_read(struct ub960_data *priv, u8 nport, u8 reg, u8 *val) { struct device *dev = &priv->client->dev; unsigned int v; @@ -787,7 +856,9 @@ static int ub960_csiport_read(struct ub960_data *priv, u8 nport, u8 reg, mutex_lock(&priv->reg_lock); - _ub960_csiport_select(priv, nport); + ret = ub960_txport_select(priv, nport); + if (ret) + goto out_unlock; ret = regmap_read(priv->regmap, reg, &v); if (ret) { @@ -804,52 +875,59 @@ static int ub960_csiport_read(struct ub960_data *priv, u8 nport, u8 reg, return ret; } -static int ub960_csiport_write(struct ub960_data *priv, u8 nport, u8 reg, - u8 val) +static int ub960_txport_write(struct ub960_data *priv, u8 nport, u8 reg, u8 val) { struct device *dev = &priv->client->dev; int ret; mutex_lock(&priv->reg_lock); - _ub960_csiport_select(priv, nport); + ret = ub960_txport_select(priv, nport); + if (ret) + goto out_unlock; ret = regmap_write(priv->regmap, reg, val); if (ret) dev_err(dev, "%s: cannot write register 0x%02x (%d)!\n", __func__, reg, ret); +out_unlock: mutex_unlock(&priv->reg_lock); return ret; } -static int ub960_csiport_update_bits(struct ub960_data *priv, u8 nport, u8 reg, - u8 mask, u8 val) +static int ub960_txport_update_bits(struct ub960_data *priv, u8 nport, u8 reg, + u8 mask, u8 val) { struct device *dev = &priv->client->dev; int ret; mutex_lock(&priv->reg_lock); - _ub960_csiport_select(priv, nport); + ret = ub960_txport_select(priv, nport); + if (ret) + goto out_unlock; ret = regmap_update_bits(priv->regmap, reg, mask, val); if (ret) dev_err(dev, "%s: cannot update register 0x%02x (%d)!\n", __func__, reg, ret); +out_unlock: mutex_unlock(&priv->reg_lock); return ret; } -static int _ub960_select_ind_reg_block(struct ub960_data *priv, u8 block) +static int ub960_select_ind_reg_block(struct ub960_data *priv, u8 block) { struct device *dev = &priv->client->dev; int ret; - if (priv->current_indirect_target == block) + lockdep_assert_held(&priv->reg_lock); + + if (priv->reg_current.indirect_target == block) return 0; ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_CTL, block << 2); @@ -859,25 +937,26 @@ static int _ub960_select_ind_reg_block(struct ub960_data *priv, u8 block) return ret; } - priv->current_indirect_target = block; + priv->reg_current.indirect_target = block; return 0; } static int ub960_read_ind(struct ub960_data *priv, u8 block, u8 reg, u8 *val) { + struct device *dev = &priv->client->dev; unsigned int v; int ret; mutex_lock(&priv->reg_lock); - ret = _ub960_select_ind_reg_block(priv, block); + ret = ub960_select_ind_reg_block(priv, block); if (ret) goto out_unlock; ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_ADDR, reg); if (ret) { - dev_err(&priv->client->dev, + dev_err(dev, "Write to IND_ACC_ADDR failed when reading %u:%x02x: %d\n", block, reg, ret); goto out_unlock; @@ -885,7 +964,7 @@ static int ub960_read_ind(struct ub960_data *priv, u8 block, u8 reg, u8 *val) ret = regmap_read(priv->regmap, UB960_SR_IND_ACC_DATA, &v); if (ret) { - dev_err(&priv->client->dev, + dev_err(dev, "Write to IND_ACC_DATA failed when reading %u:%x02x: %d\n", block, reg, ret); goto out_unlock; @@ -901,17 +980,18 @@ static int ub960_read_ind(struct ub960_data *priv, u8 block, u8 reg, u8 *val) static int ub960_write_ind(struct ub960_data *priv, u8 block, u8 reg, u8 val) { + struct device *dev = &priv->client->dev; int ret; mutex_lock(&priv->reg_lock); - ret = _ub960_select_ind_reg_block(priv, block); + ret = ub960_select_ind_reg_block(priv, block); if (ret) goto out_unlock; ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_ADDR, reg); if (ret) { - dev_err(&priv->client->dev, + dev_err(dev, "Write to IND_ACC_ADDR failed when writing %u:%x02x: %d\n", block, reg, ret); goto out_unlock; @@ -919,8 +999,8 @@ static int ub960_write_ind(struct ub960_data *priv, u8 block, u8 reg, u8 val) ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_DATA, val); if (ret) { - dev_err(&priv->client->dev, - "Write to IND_ACC_DATA failed when writing %u:%x02x\n: %d\n", + dev_err(dev, + "Write to IND_ACC_DATA failed when writing %u:%x02x: %d\n", block, reg, ret); goto out_unlock; } @@ -931,52 +1011,21 @@ static int ub960_write_ind(struct ub960_data *priv, u8 block, u8 reg, u8 val) return ret; } -static int ub960_write_ind16(struct ub960_data *priv, u8 block, u8 reg, u16 val) -{ - int ret; - - mutex_lock(&priv->reg_lock); - - ret = _ub960_select_ind_reg_block(priv, block); - if (ret) - goto out_unlock; - - ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_ADDR, reg); - if (ret) - goto out_unlock; - - ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_DATA, val >> 8); - if (ret) - goto out_unlock; - - ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_ADDR, reg + 1); - if (ret) - goto out_unlock; - - ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_DATA, val & 0xff); - if (ret) - goto out_unlock; - -out_unlock: - mutex_unlock(&priv->reg_lock); - - return ret; -} - static int ub960_ind_update_bits(struct ub960_data *priv, u8 block, u8 reg, u8 mask, u8 val) { + struct device *dev = &priv->client->dev; int ret; mutex_lock(&priv->reg_lock); - ret = _ub960_select_ind_reg_block(priv, block); + ret = ub960_select_ind_reg_block(priv, block); if (ret) goto out_unlock; ret = regmap_write(priv->regmap, UB960_SR_IND_ACC_ADDR, reg); if (ret) { - dev_err(&priv->client->dev, + dev_err(dev, "Write to IND_ACC_ADDR failed when updating %u:%x02x: %d\n", block, reg, ret); goto out_unlock; @@ -985,7 +1034,7 @@ static int ub960_ind_update_bits(struct ub960_data *priv, u8 block, u8 reg, ret = regmap_update_bits(priv->regmap, UB960_SR_IND_ACC_DATA, mask, val); if (ret) { - dev_err(&priv->client->dev, + dev_err(dev, "Write to IND_ACC_DATA failed when updating %u:%x02x: %d\n", block, reg, ret); goto out_unlock; @@ -1015,9 +1064,7 @@ static int ub960_atr_attach_client(struct i2c_atr *atr, u32 chan_id, int ret = 0; u8 port_reg_idx_mask = 0; - dev_dbg(dev, "rx%u: %s\n", chan_id, __func__); - - mutex_lock(&priv->atr_alias_table.lock); + mutex_lock(&priv->atr.lock); /* * Go through the alias table and: @@ -1025,15 +1072,15 @@ static int ub960_atr_attach_client(struct i2c_atr *atr, u32 chan_id, * 2. Construct a bitmask of port's used alias entries */ - for (pool_idx = 0; pool_idx < priv->atr_alias_table.num_entries; pool_idx++) { + for (pool_idx = 0; pool_idx < priv->atr.num_aliases; ++pool_idx) { struct atr_alias_table_entry *e; - e = &priv->atr_alias_table.entries[pool_idx]; + e = &priv->atr.aliases[pool_idx]; - if (!entry && !e->reserved) + if (!entry && !e->in_use) entry = e; - if (e->reserved && e->nport == rxport->nport) + if (e->in_use && e->nport == rxport->nport) port_reg_idx_mask |= BIT(e->port_reg_idx); } @@ -1053,7 +1100,7 @@ static int ub960_atr_attach_client(struct i2c_atr *atr, u32 chan_id, reg_idx = ffz(port_reg_idx_mask); - entry->reserved = true; + entry->in_use = true; entry->nport = rxport->nport; entry->slave_id = client->addr; entry->port_reg_idx = reg_idx; @@ -1067,11 +1114,8 @@ static int ub960_atr_attach_client(struct i2c_atr *atr, u32 chan_id, *alias_id = alias; /* tell the atr which alias we chose */ - dev_dbg(dev, "rx%u: client 0x%02x mapped at alias 0x%02x (%s)\n", - rxport->nport, client->addr, alias, client->name); - out_unlock: - mutex_unlock(&priv->atr_alias_table.lock); + mutex_unlock(&priv->atr.lock); return ret; } @@ -1084,43 +1128,35 @@ static void ub960_atr_detach_client(struct i2c_atr *atr, u32 chan_id, struct atr_alias_table_entry *entry; unsigned int reg_idx; unsigned int pool_idx; - u16 alias = 0; - - dev_dbg(dev, "rx%u: %s\n", chan_id, __func__); - mutex_lock(&priv->atr_alias_table.lock); + mutex_lock(&priv->atr.lock); /* Find alias mapped to this client */ - for (pool_idx = 0; pool_idx < priv->atr_alias_table.num_entries; pool_idx++) { - entry = &priv->atr_alias_table.entries[pool_idx]; + for (pool_idx = 0; pool_idx < priv->atr.num_aliases; ++pool_idx) { + entry = &priv->atr.aliases[pool_idx]; - if (entry->reserved && entry->nport == rxport->nport && + if (entry->in_use && entry->nport == rxport->nport && entry->slave_id == client->addr) break; } - if (pool_idx == priv->atr_alias_table.num_entries) { + if (pool_idx == priv->atr.num_aliases) { dev_err(dev, "rx%u: client 0x%02x is not mapped!\n", rxport->nport, client->addr); goto out_unlock; } - alias = entry->alias_id; - reg_idx = entry->port_reg_idx; /* Unmap */ ub960_rxport_write(priv, chan_id, UB960_RR_SLAVE_ALIAS(reg_idx), 0); - entry->reserved = false; - - dev_dbg(dev, "rx%u: client 0x%02x unmapped from alias 0x%02x (%s)\n", - rxport->nport, client->addr, alias, client->name); + entry->in_use = false; out_unlock: - mutex_unlock(&priv->atr_alias_table.lock); + mutex_unlock(&priv->atr.lock); } static const struct i2c_atr_ops ub960_atr_ops = { @@ -1128,18 +1164,39 @@ static const struct i2c_atr_ops ub960_atr_ops = { .detach_client = ub960_atr_detach_client, }; +static int ub960_init_atr(struct ub960_data *priv) +{ + struct device *dev = &priv->client->dev; + struct i2c_adapter *parent_adap = priv->client->adapter; + + priv->atr.atr = i2c_atr_new(parent_adap, dev, &ub960_atr_ops, + priv->hw_data->num_rxports); + if (IS_ERR(priv->atr.atr)) + return PTR_ERR(priv->atr.atr); + + i2c_atr_set_driver_data(priv->atr.atr, priv); + + return 0; +} + +static void ub960_uninit_atr(struct ub960_data *priv) +{ + i2c_atr_delete(priv->atr.atr); + priv->atr.atr = NULL; +} + /* ----------------------------------------------------------------------------- - * CSI ports + * TX ports */ static int ub960_parse_dt_txport(struct ub960_data *priv, - const struct fwnode_handle *ep_fwnode, + struct fwnode_handle *ep_fwnode, u8 nport) { struct device *dev = &priv->client->dev; + struct v4l2_fwnode_endpoint vep = {}; struct ub960_txport *txport; int ret; - u64 freq; txport = kzalloc(sizeof(*txport), GFP_KERNEL); if (!txport) @@ -1148,39 +1205,40 @@ static int ub960_parse_dt_txport(struct ub960_data *priv, txport->priv = priv; txport->nport = nport; - priv->txports[nport] = txport; - - ret = fwnode_property_count_u32(ep_fwnode, "data-lanes"); - if (ret < 0) { - dev_err(dev, "tx%u: failed to parse 'data-lanes': %d\n", nport, - ret); + vep.bus_type = V4L2_MBUS_CSI2_DPHY; + ret = v4l2_fwnode_endpoint_alloc_parse(ep_fwnode, &vep); + if (ret) { + dev_err(dev, "tx%u: failed to parse endpoint data\n", nport); goto err_free_txport; } - txport->num_data_lanes = ret; + txport->num_data_lanes = vep.bus.mipi_csi2.num_data_lanes; - ret = fwnode_property_read_u64(ep_fwnode, "link-frequencies", &freq); - if (ret) { - dev_err(dev, "tx%u: failed to read 'link-frequencies': %d\n", - nport, ret); - goto err_free_txport; + if (vep.nr_of_link_frequencies != 1) { + ret = -EINVAL; + goto err_free_vep; } - priv->tx_link_freq[0] = freq; - priv->tx_data_rate = freq * 2; + priv->tx_link_freq[0] = vep.link_frequencies[0]; + priv->tx_data_rate = priv->tx_link_freq[0] * 2; if (priv->tx_data_rate != MHZ(1600) && priv->tx_data_rate != MHZ(1200) && priv->tx_data_rate != MHZ(800) && priv->tx_data_rate != MHZ(400)) { dev_err(dev, "tx%u: invalid 'link-frequencies' value\n", nport); - return -EINVAL; + ret = -EINVAL; + goto err_free_vep; } - dev_dbg(dev, "tx%u: nominal data rate: %u", nport, priv->tx_data_rate); + v4l2_fwnode_endpoint_free(&vep); + + priv->txports[nport] = txport; return 0; +err_free_vep: + v4l2_fwnode_endpoint_free(&vep); err_free_txport: kfree(txport); @@ -1193,7 +1251,7 @@ static void ub960_csi_handle_events(struct ub960_data *priv, u8 nport) u8 csi_tx_isr; int ret; - ret = ub960_csiport_read(priv, nport, UB960_TR_CSI_TX_ISR, &csi_tx_isr); + ret = ub960_txport_read(priv, nport, UB960_TR_CSI_TX_ISR, &csi_tx_isr); if (ret) return; @@ -1288,15 +1346,13 @@ static int ub960_rxport_get_strobe_pos(struct ub960_data *priv, UB960_IR_RX_ANA_STROBE_SET_CLK, &v); clk_delay = (v & UB960_IR_RX_ANA_STROBE_SET_CLK_NO_EXTRA_DELAY) ? - 0 : - UB960_MANUAL_STROBE_EXTRA_DELAY; + 0 : UB960_MANUAL_STROBE_EXTRA_DELAY; ub960_read_ind(priv, UB960_IND_TARGET_RX_ANA(nport), UB960_IR_RX_ANA_STROBE_SET_DATA, &v); data_delay = (v & UB960_IR_RX_ANA_STROBE_SET_DATA_NO_EXTRA_DELAY) ? - 0 : - UB960_MANUAL_STROBE_EXTRA_DELAY; + 0 : UB960_MANUAL_STROBE_EXTRA_DELAY; ret = ub960_rxport_read(priv, nport, UB960_RR_SFILTER_STS_0, &v); if (ret) @@ -1457,10 +1513,9 @@ static int ub960_rxport_link_ok(struct ub960_data *priv, unsigned int nport, bool *ok) { u8 rx_port_sts1, rx_port_sts2; - unsigned int parity_errors; + u16 parity_errors; u8 csi_rx_sts; u8 csi_err_cnt; - u8 v1, v2; u8 bcc_sts; int ret; bool errors; @@ -1493,16 +1548,11 @@ static int ub960_rxport_link_ok(struct ub960_data *priv, unsigned int nport, if (ret) return ret; - ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v1); - if (ret) - return ret; - - ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_LO, &v2); + ret = ub960_rxport_read16(priv, nport, UB960_RR_RX_PAR_ERR_HI, + &parity_errors); if (ret) return ret; - parity_errors = (v1 << 8) | v2; - errors = (rx_port_sts1 & UB960_RR_RX_PORT_STS1_ERROR_MASK) || (rx_port_sts2 & UB960_RR_RX_PORT_STS2_ERROR_MASK) || (bcc_sts & UB960_RR_BCC_STATUS_ERROR_MASK) || @@ -1530,8 +1580,11 @@ static int ub960_rxport_wait_locks(struct ub960_data *priv, u8 nport; int ret; - if (port_mask == 0) + if (port_mask == 0) { + if (lock_mask) + *lock_mask = 0; return 0; + } if (port_mask >= BIT(priv->hw_data->num_rxports)) return -EINVAL; @@ -1555,6 +1608,11 @@ static int ub960_rxport_wait_locks(struct ub960_data *priv, if (ret) return ret; + /* + * We want the link to be ok for two consecutive loops, + * as a link could get established just before our test + * and drop soon after. + */ if (!ok || !(link_ok_mask & BIT(nport))) missing++; @@ -1579,7 +1637,7 @@ static int ub960_rxport_wait_locks(struct ub960_data *priv, for_each_set_bit(nport, &port_mask, priv->hw_data->num_rxports) { struct ub960_rxport *rxport = priv->rxports[nport]; s8 strobe_pos, eq_level; - u8 v1, v2; + u16 v; if (!rxport) continue; @@ -1589,8 +1647,7 @@ static int ub960_rxport_wait_locks(struct ub960_data *priv, continue; } - ub960_rxport_read(priv, nport, UB960_RR_RX_FREQ_HIGH, &v1); - ub960_rxport_read(priv, nport, UB960_RR_RX_FREQ_LOW, &v2); + ub960_rxport_read16(priv, nport, UB960_RR_RX_FREQ_HIGH, &v); ret = ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos); if (ret) @@ -1600,35 +1657,13 @@ static int ub960_rxport_wait_locks(struct ub960_data *priv, if (ret) return ret; - dev_dbg(dev, "\trx%u: locked, SP: %d, EQ: %u, freq %u Hz\n", - nport, strobe_pos, eq_level, - v1 * 1000000 + v2 * 1000000 / 256); + dev_dbg(dev, "\trx%u: locked, SP: %d, EQ: %u, freq %llu Hz\n", + nport, strobe_pos, eq_level, (v * 1000000ULL) >> 8); } return 0; } -static int ub960_init_atr(struct ub960_data *priv) -{ - struct device *dev = &priv->client->dev; - struct i2c_adapter *parent_adap = priv->client->adapter; - - priv->atr = i2c_atr_new(parent_adap, dev, &ub960_atr_ops, - priv->hw_data->num_rxports); - if (IS_ERR(priv->atr)) - return PTR_ERR(priv->atr); - - i2c_atr_set_driver_data(priv->atr, priv); - - return 0; -} - -static void ub960_uninit_atr(struct ub960_data *priv) -{ - i2c_atr_delete(priv->atr); - priv->atr = NULL; -} - static unsigned long ub960_calc_bc_clk_rate_ub960(struct ub960_data *priv, struct ub960_rxport *rxport) { @@ -1684,37 +1719,37 @@ static int ub960_rxport_add_serializer(struct ub960_data *priv, u8 nport) { struct ub960_rxport *rxport = priv->rxports[nport]; struct device *dev = &priv->client->dev; - struct ds90ub9xx_platform_data *ser_pdata = &rxport->ser_platform_data; + struct ds90ub9xx_platform_data *ser_pdata = &rxport->ser.pdata; struct i2c_board_info ser_info = { - .of_node = to_of_node(rxport->remote_fwnode), - .fwnode = rxport->remote_fwnode, + .of_node = to_of_node(rxport->ser.fwnode), + .fwnode = rxport->ser.fwnode, .platform_data = ser_pdata, }; ser_pdata->port = nport; - ser_pdata->atr = priv->atr; + ser_pdata->atr = priv->atr.atr; if (priv->hw_data->is_ub9702) ser_pdata->bc_rate = ub960_calc_bc_clk_rate_ub9702(priv, rxport); else ser_pdata->bc_rate = ub960_calc_bc_clk_rate_ub960(priv, rxport); /* - * Adding the serializer under rxport->adap would be cleaner, but it - * would need tweaks to bypass the alias table. Adding to the - * upstream adapter is way simpler. + * The serializer is added under the same i2c adapter as the + * deserializer. This is not quite right, as the serializer is behind + * the FPD-Link. */ - ser_info.addr = rxport->ser_alias; - rxport->ser_client = + ser_info.addr = rxport->ser.alias; + rxport->ser.client = i2c_new_client_device(priv->client->adapter, &ser_info); - if (!rxport->ser_client) { + if (!rxport->ser.client) { dev_err(dev, "rx%u: cannot add %s i2c device", nport, ser_info.type); return -EIO; } dev_dbg(dev, "rx%u: remote serializer at alias 0x%02x (%u-%04x)\n", - nport, rxport->ser_client->addr, - rxport->ser_client->adapter->nr, rxport->ser_client->addr); + nport, rxport->ser.client->addr, + rxport->ser.client->adapter->nr, rxport->ser.client->addr); return 0; } @@ -1723,8 +1758,8 @@ static void ub960_rxport_remove_serializer(struct ub960_data *priv, u8 nport) { struct ub960_rxport *rxport = priv->rxports[nport]; - i2c_unregister_device(rxport->ser_client); - rxport->ser_client = NULL; + i2c_unregister_device(rxport->ser.client); + rxport->ser.client = NULL; } /* Add serializer i2c devices for all initialized ports */ @@ -1750,10 +1785,6 @@ static int ub960_rxport_add_serializers(struct ub960_data *priv) while (nport--) { struct ub960_rxport *rxport = priv->rxports[nport]; - if (!rxport) - continue; - - rxport = priv->rxports[nport]; if (!rxport) continue; @@ -1792,7 +1823,7 @@ static void ub960_init_tx_port(struct ub960_data *priv, csi_ctl |= (4 - txport->num_data_lanes) << 4; - ub960_csiport_write(priv, nport, UB960_TR_CSI_CTL, csi_ctl); + ub960_txport_write(priv, nport, UB960_TR_CSI_CTL, csi_ctl); } static int ub960_init_tx_ports(struct ub960_data *priv) @@ -1831,20 +1862,20 @@ static int ub960_init_tx_ports(struct ub960_data *priv) case MHZ(1600): default: ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x92, 0x80); - ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x4B, 0x2A); + ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x4b, 0x2a); break; case MHZ(800): ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x92, 0x90); - ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x4F, 0x2A); - ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x4B, 0x2A); + ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x4f, 0x2a); + ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x4b, 0x2a); break; case MHZ(400): - ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x92, 0xA0); + ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x92, 0xa0); break; } } - for (nport = 0; nport < priv->hw_data->num_txports; nport++) { + for (nport = 0; nport < priv->hw_data->num_txports; ++nport) { struct ub960_txport *txport = priv->txports[nport]; if (!txport) @@ -1941,7 +1972,7 @@ static void ub960_init_rx_port_ub960(struct ub960_data *priv, /* Enable I2C communication to the serializer via the alias addr */ ub960_rxport_write(priv, nport, UB960_RR_SER_ALIAS_ID, - rxport->ser_alias << 1); + rxport->ser.alias << 1); /* Configure EQ related settings */ ub960_rxport_config_eq(priv, nport); @@ -1992,19 +2023,19 @@ static void ub960_init_rx_port_ub9702_fpd3(struct ub960_data *priv, ub960_rxport_write(priv, nport, UB960_RR_CHANNEL_MODE, fpd_func_mode); /* set serdes_eq_mode = 1 */ - ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xA8, 0x80); + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xa8, 0x80); /* enable serdes driver */ - ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x0D, 0x7F); + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x0d, 0x7f); /* set serdes_eq_offset=4 */ - ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2B, 0x04); + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2b, 0x04); - /* init default serdes_eq_max in 0xA9 */ - ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xA9, 0x23); + /* init default serdes_eq_max in 0xa9 */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xa9, 0x23); - /* init serdes_eq_min in 0xAA */ - ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xAA, 0); + /* init serdes_eq_min in 0xaa */ + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xaa, 0); /* serdes_driver_ctl2 control: DS90UB953-Q1/DS90UB933-Q1/DS90UB913A-Q1 */ ub960_ind_update_bits(priv, UB960_IND_TARGET_RX_ANA(nport), 0x1b, @@ -2025,25 +2056,25 @@ static void ub960_init_rx_port_ub9702_fpd4_aeq(struct ub960_data *priv, u8 v; /* AEQ init */ - ub960_read_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2C, &v); + ub960_read_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2c, &v); ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x27, v); ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x28, v + 1); - ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2B, 0x00); + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2b, 0x00); } /* enable serdes_eq_ctl2 */ - ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x9E, 0x00); + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x9e, 0x00); /* enable serdes_eq_ctl1 */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x90, 0x40); /* enable serdes_eq_en */ - ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2E, 0x40); + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2e, 0x40); /* disable serdes_eq_override */ - ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xF0, 0x00); + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xf0, 0x00); /* disable serdes_gain_override */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x71, 0x00); @@ -2087,7 +2118,7 @@ static void ub960_init_rx_port_ub9702_fpd4(struct ub960_data *priv, ub960_rxport_write(priv, nport, UB960_RR_CHANNEL_MODE, 0); /* add serdes_eq_offset of 4 */ - ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2B, 0x04); + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2b, 0x04); /* FPD4 serdes_start_eq in 0x27: assign default */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x27, 0x0); @@ -2097,12 +2128,12 @@ static void ub960_init_rx_port_ub9702_fpd4(struct ub960_data *priv, /* set serdes_driver_mode into FPD IV mode */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x04, 0x00); /* set FPD PBC drv into FPD IV mode */ - ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x1B, 0x00); + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x1b, 0x00); /* set serdes_system_init to 0x2f */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x21, 0x2f); /* set serdes_system_rst in reset mode */ - ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x25, 0xC1); + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x25, 0xc1); /* RX port to 7.55G mode */ ub960_update_bits(priv, UB960_SR_FPD_RATE_CFG, 0x3 << (nport * 2), @@ -2144,7 +2175,8 @@ static void ub960_init_rx_port_ub9702(struct ub960_data *priv, } /* LV_POLARITY & FV_POLARITY */ - ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG2, 0x3, 0x1); + ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG2, 0x3, + rxport->lv_fv_pol); /* Enable all interrupt sources from this port */ ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_HI, 0x07); @@ -2157,7 +2189,7 @@ static void ub960_init_rx_port_ub9702(struct ub960_data *priv, /* Enable I2C communication to the serializer via the alias addr */ ub960_rxport_write(priv, nport, UB960_RR_SER_ALIAS_ID, - rxport->ser_alias << 1); + rxport->ser.alias << 1); /* Enable RX port */ ub960_update_bits(priv, UB960_SR_RX_PORT_CTL, BIT(nport), BIT(nport)); @@ -2172,7 +2204,7 @@ static int ub960_init_rx_ports(struct ub960_data *priv) { unsigned int nport; - for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { struct ub960_rxport *rxport = priv->rxports[nport]; if (!rxport) @@ -2214,11 +2246,12 @@ static void ub960_rxport_handle_events(struct ub960_data *priv, u8 nport) return; if (rx_port_sts1 & UB960_RR_RX_PORT_STS1_PARITY_ERROR) { - u8 v1, v2; + u16 v; - ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v1); - ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_LO, &v2); - dev_err(dev, "rx%u parity errors: %u\n", nport, (v1 << 8) | v2); + ret = ub960_rxport_read16(priv, nport, UB960_RR_RX_PAR_ERR_HI, + &v); + if (!ret) + dev_err(dev, "rx%u parity errors: %u\n", nport, v); } if (rx_port_sts1 & UB960_RR_RX_PORT_STS1_BCC_CRC_ERROR) @@ -2273,21 +2306,20 @@ static void ub960_rxport_handle_events(struct ub960_data *priv, u8 nport) dev_err(dev, "rx%u BCC sequence error", nport); if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_LINE_LEN_CHG) { - u8 v1, v2; + u16 v; - ub960_rxport_read(priv, nport, UB960_RR_LINE_LEN_1, &v1); - ub960_rxport_read(priv, nport, UB960_RR_LINE_LEN_0, &v2); - dev_dbg(dev, "rx%u line len changed: %u\n", nport, - (v1 << 8) | v2); + ret = ub960_rxport_read16(priv, nport, UB960_RR_LINE_LEN_1, &v); + if (!ret) + dev_dbg(dev, "rx%u line len changed: %u\n", nport, v); } if (rx_port_sts2 & UB960_RR_RX_PORT_STS2_LINE_CNT_CHG) { - u8 v1, v2; + u16 v; - ub960_rxport_read(priv, nport, UB960_RR_LINE_COUNT_HI, &v1); - ub960_rxport_read(priv, nport, UB960_RR_LINE_COUNT_LO, &v2); - dev_dbg(dev, "rx%u line count changed: %u\n", nport, - (v1 << 8) | v2); + ret = ub960_rxport_read16(priv, nport, UB960_RR_LINE_COUNT_HI, + &v); + if (!ret) + dev_dbg(dev, "rx%u line count changed: %u\n", nport, v); } if (rx_port_sts1 & UB960_RR_RX_PORT_STS1_LOCK_STS_CHG) { @@ -2311,16 +2343,31 @@ static void ub960_rxport_handle_events(struct ub960_data *priv, u8 nport) * V4L2 */ +/* + * The current implementation only supports a simple VC mapping, where all VCs + * from a one RX port will be mapped to the same VC. Also, the hardware + * dictates that all streams from an RX port must go to a single TX port. + * + * This function decides the target VC numbers for each RX port with a simple + * algorithm, so that for each TX port, we get VC numbers starting from 0, + * and counting up. + * + * E.g. if all four RX ports are in use, of which the first two go to the + * first TX port and the secont two go to the second TX port, we would get + * the following VCs for the four RX ports: 0, 1, 0, 1. + * + * TODO: implement a more sophisticated VC mapping. As the driver cannot know + * what VCs the sinks expect (say, an FPGA with hardcoded VC routing), this + * probably needs to be somehow configurable. Device tree? + */ static void ub960_get_vc_maps(struct ub960_data *priv, struct v4l2_subdev_state *state, u8 *vc) { - const struct v4l2_subdev_krouting *routing = &state->routing; - u8 cur_vc[UB960_MAX_TX_NPORTS] = { }; + u8 cur_vc[UB960_MAX_TX_NPORTS] = {}; + struct v4l2_subdev_route *route; u8 handled_mask = 0; - unsigned int i; - for (i = 0; i < routing->num_routes; ++i) { - struct v4l2_subdev_route *route = &routing->routes[i]; + for_each_active_route(&state->routing, route) { unsigned int rx, tx; rx = ub960_pad_to_port(priv, route->sink_pad); @@ -2340,11 +2387,9 @@ static int ub960_enable_tx_port(struct ub960_data *priv, unsigned int nport) dev_dbg(dev, "enable TX port %u\n", nport); - ub960_csiport_update_bits(priv, nport, UB960_TR_CSI_CTL, - UB960_TR_CSI_CTL_CSI_ENABLE, - UB960_TR_CSI_CTL_CSI_ENABLE); - - return 0; + return ub960_txport_update_bits(priv, nport, UB960_TR_CSI_CTL, + UB960_TR_CSI_CTL_CSI_ENABLE, + UB960_TR_CSI_CTL_CSI_ENABLE); } static void ub960_disable_tx_port(struct ub960_data *priv, unsigned int nport) @@ -2353,8 +2398,8 @@ static void ub960_disable_tx_port(struct ub960_data *priv, unsigned int nport) dev_dbg(dev, "disable TX port %u\n", nport); - ub960_csiport_update_bits(priv, nport, UB960_TR_CSI_CTL, - UB960_TR_CSI_CTL_CSI_ENABLE, 0); + ub960_txport_update_bits(priv, nport, UB960_TR_CSI_CTL, + UB960_TR_CSI_CTL_CSI_ENABLE, 0); } static int ub960_enable_rx_port(struct ub960_data *priv, unsigned int nport) @@ -2364,9 +2409,7 @@ static int ub960_enable_rx_port(struct ub960_data *priv, unsigned int nport) dev_dbg(dev, "enable RX port %u\n", nport); /* Enable forwarding */ - ub960_update_bits(priv, UB960_SR_FWD_CTL1, BIT(4 + nport), 0); - - return 0; + return ub960_update_bits(priv, UB960_SR_FWD_CTL1, BIT(4 + nport), 0); } static void ub960_disable_rx_port(struct ub960_data *priv, unsigned int nport) @@ -2380,10 +2423,56 @@ static void ub960_disable_rx_port(struct ub960_data *priv, unsigned int nport) BIT(4 + nport)); } +/* + * The driver only supports using a single VC for each source. This function + * checks that each source only provides streams using a single VC. + */ +static int ub960_validate_stream_vcs(struct ub960_data *priv) +{ + unsigned int nport; + unsigned int i; + + for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + struct ub960_rxport *rxport = priv->rxports[nport]; + struct v4l2_mbus_frame_desc desc; + int ret; + u8 cur_vc; + + if (!rxport) + continue; + + ret = v4l2_subdev_call(rxport->source.sd, pad, get_frame_desc, + rxport->source.pad, &desc); + if (ret) + return ret; + + if (desc.type != V4L2_MBUS_FRAME_DESC_TYPE_CSI2) + continue; + + for (i = 0; i < desc.num_entries; ++i) { + u8 vc = desc.entry[i].bus.csi2.vc; + + if (i == 0) { + cur_vc = vc; + continue; + } + + if (vc == cur_vc) + continue; + + dev_err(&priv->client->dev, + "rx%u: source with multiple virtual-channels is not supported\n", + nport); + return -ENODEV; + } + } + + return 0; +} + static int ub960_configure_ports_for_streaming(struct ub960_data *priv, struct v4l2_subdev_state *state) { - const struct v4l2_subdev_krouting *routing = &state->routing; u8 fwd_ctl; struct { u32 num_streams; @@ -2391,13 +2480,19 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, u8 meta_dt; u32 meta_lines; u32 tx_port; - } rx_data[UB960_MAX_RX_NPORTS] = { }; - u8 vc_map[UB960_MAX_RX_NPORTS] = { }; + } rx_data[UB960_MAX_RX_NPORTS] = {}; + u8 vc_map[UB960_MAX_RX_NPORTS] = {}; + struct v4l2_subdev_route *route; + unsigned int nport; + int ret; + + ret = ub960_validate_stream_vcs(priv); + if (ret) + return ret; ub960_get_vc_maps(priv, state, vc_map); - for (unsigned int i = 0; i < routing->num_routes; ++i) { - struct v4l2_subdev_route *route = &routing->routes[i]; + for_each_active_route(&state->routing, route) { struct ub960_rxport *rxport; struct ub960_txport *txport; struct v4l2_mbus_framefmt *fmt; @@ -2455,7 +2550,7 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, fwd_ctl = 0; - for (unsigned int nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { struct ub960_rxport *rxport = priv->rxports[nport]; u8 vc = vc_map[nport]; @@ -2534,24 +2629,11 @@ static int ub960_enable_streams(struct v4l2_subdev *sd, { struct ub960_data *priv = sd_to_ub960(sd); struct device *dev = &priv->client->dev; - const struct v4l2_subdev_krouting *routing; - unsigned int source_stream; - int ret; - u64 sink_streams[UB960_MAX_RX_NPORTS] = { }; - unsigned int nport; + u64 sink_streams[UB960_MAX_RX_NPORTS] = {}; + struct v4l2_subdev_route *route; unsigned int failed_port; - - dev_dbg(dev, "Enable streams %u:%#llx\n", source_pad, - source_streams_mask); - - if (priv->stream_enable_mask[source_pad] & source_streams_mask) { - dev_err(dev, - "cannot enable already enabled streams on pad %u mask %#llx\n", - source_pad, source_streams_mask); - return -EBUSY; - } - - routing = &state->routing; + unsigned int nport; + int ret; if (!priv->streaming) { dev_dbg(dev, "Prepare for streaming\n"); @@ -2571,22 +2653,16 @@ static int ub960_enable_streams(struct v4l2_subdev *sd, priv->stream_enable_mask[source_pad] |= source_streams_mask; /* Collect sink streams per pad which we need to enable */ - for (source_stream = 0; source_stream < sizeof(source_streams_mask) * 8; - ++source_stream) { - struct v4l2_subdev_route *route; - - if (!(source_streams_mask & BIT_ULL(source_stream))) + for_each_active_route(&state->routing, route) { + if (route->source_pad != source_pad) continue; - for_each_active_route(routing, route) { - if (!(route->source_pad == source_pad) || - !(route->source_stream == source_stream)) - continue; + if (!(source_streams_mask & BIT_ULL(route->source_stream))) + continue; - nport = ub960_pad_to_port(priv, route->sink_pad); + nport = ub960_pad_to_port(priv, route->sink_pad); - sink_streams[nport] |= BIT_ULL(route->sink_stream); - } + sink_streams[nport] |= BIT_ULL(route->sink_stream); } for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { @@ -2604,12 +2680,12 @@ static int ub960_enable_streams(struct v4l2_subdev *sd, priv->stream_enable_mask[nport] |= sink_streams[nport]; - dev_dbg(dev, "Enable RX port %u streams %#llx\n", nport, + dev_dbg(dev, "enable RX port %u streams %#llx\n", nport, sink_streams[nport]); ret = v4l2_subdev_enable_streams( - priv->rxports[nport]->source_sd, - priv->rxports[nport]->source_sd_pad, + priv->rxports[nport]->source.sd, + priv->rxports[nport]->source.pad, sink_streams[nport]); if (ret) { priv->stream_enable_mask[nport] &= ~sink_streams[nport]; @@ -2631,12 +2707,12 @@ static int ub960_enable_streams(struct v4l2_subdev *sd, if (!sink_streams[nport]) continue; - dev_dbg(dev, "Disable RX port %u streams %#llx\n", nport, + dev_dbg(dev, "disable RX port %u streams %#llx\n", nport, sink_streams[nport]); ret = v4l2_subdev_disable_streams( - priv->rxports[nport]->source_sd, - priv->rxports[nport]->source_sd_pad, + priv->rxports[nport]->source.sd, + priv->rxports[nport]->source.pad, sink_streams[nport]); if (ret) dev_err(dev, "Failed to disable streams: %d\n", ret); @@ -2665,53 +2741,34 @@ static int ub960_disable_streams(struct v4l2_subdev *sd, { struct ub960_data *priv = sd_to_ub960(sd); struct device *dev = &priv->client->dev; - const struct v4l2_subdev_krouting *routing; - int ret; - unsigned int source_stream; - u64 sink_streams[UB960_MAX_RX_NPORTS] = { }; + u64 sink_streams[UB960_MAX_RX_NPORTS] = {}; + struct v4l2_subdev_route *route; unsigned int nport; - - dev_dbg(dev, "Disable streams %u:%#llx\n", source_pad, - source_streams_mask); - - if ((priv->stream_enable_mask[source_pad] & source_streams_mask) != source_streams_mask) { - dev_err(dev, - "cannot disable already disabled streams on pad %u mask %#llx\n", - source_pad, source_streams_mask); - return -EBUSY; - } - - routing = &state->routing; + int ret; /* Collect sink streams per pad which we need to disable */ - for (source_stream = 0; source_stream < sizeof(source_streams_mask) * 8; - ++source_stream) { - struct v4l2_subdev_route *route; - - if (!(source_streams_mask & BIT_ULL(source_stream))) + for_each_active_route(&state->routing, route) { + if (route->source_pad != source_pad) continue; - for_each_active_route(routing, route) { - if (!(route->source_pad == source_pad) || - !(route->source_stream == source_stream)) - continue; + if (!(source_streams_mask & BIT_ULL(route->source_stream))) + continue; - nport = ub960_pad_to_port(priv, route->sink_pad); + nport = ub960_pad_to_port(priv, route->sink_pad); - sink_streams[nport] |= BIT_ULL(route->sink_stream); - } + sink_streams[nport] |= BIT_ULL(route->sink_stream); } for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { if (!sink_streams[nport]) continue; - dev_dbg(dev, "Disable RX port %u streams %#llx\n", nport, + dev_dbg(dev, "disable RX port %u streams %#llx\n", nport, sink_streams[nport]); ret = v4l2_subdev_disable_streams( - priv->rxports[nport]->source_sd, - priv->rxports[nport]->source_sd_pad, + priv->rxports[nport]->source.sd, + priv->rxports[nport]->source.pad, sink_streams[nport]); if (ret) dev_err(dev, "Failed to disable streams: %d\n", ret); @@ -2736,76 +2793,14 @@ static int ub960_disable_streams(struct v4l2_subdev *sd, return 0; } -static int ub960_s_stream(struct v4l2_subdev *sd, int enable) -{ - struct ub960_data *priv = sd_to_ub960(sd); - const struct v4l2_subdev_krouting *routing; - struct v4l2_subdev_state *state; - struct v4l2_subdev_route *route; - u64 pad_stream_masks[UB960_MAX_TX_NPORTS] = { }; - unsigned int nport; - int ret = 0; - - state = v4l2_subdev_lock_and_get_active_state(sd); - - routing = &state->routing; - - for_each_active_route(routing, route) - pad_stream_masks[ub960_pad_to_port(priv, route->source_pad)] |= - BIT_ULL(route->source_stream); - - if (enable) { - for (nport = 0; nport < UB960_MAX_TX_NPORTS; ++nport) { - if (pad_stream_masks[nport] == 0) - continue; - - ret = ub960_enable_streams( - sd, state, priv->hw_data->num_rxports + nport, - pad_stream_masks[nport]); - - if (ret) { - while (nport--) { - if (pad_stream_masks[nport] == 0) - continue; - - ub960_disable_streams( - sd, state, - priv->hw_data->num_rxports + - nport, - pad_stream_masks[nport]); - } - - break; - } - } - } else { - for (nport = 0; nport < UB960_MAX_TX_NPORTS; ++nport) { - if (pad_stream_masks[nport] == 0) - continue; - - ub960_disable_streams(sd, state, - priv->hw_data->num_rxports + nport, - pad_stream_masks[nport]); - } - } - - v4l2_subdev_unlock_state(state); - - return ret; -} - -static const struct v4l2_subdev_video_ops ub960_video_ops = { - .s_stream = ub960_s_stream, -}; - static int _ub960_set_routing(struct v4l2_subdev *sd, struct v4l2_subdev_state *state, struct v4l2_subdev_krouting *routing) { - const struct v4l2_mbus_framefmt format = { + static const struct v4l2_mbus_framefmt format = { .width = 640, .height = 480, - .code = MEDIA_BUS_FMT_UYVY8_2X8, + .code = MEDIA_BUS_FMT_UYVY8_1X16, .field = V4L2_FIELD_NONE, .colorspace = V4L2_COLORSPACE_SRGB, .ycbcr_enc = V4L2_YCBCR_ENC_601, @@ -2822,12 +2817,9 @@ static int _ub960_set_routing(struct v4l2_subdev *sd, if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX) return -E2BIG; - /* - * TODO: We need a new flag to validate that all streams from a sink pad - * go to a single source pad. - */ ret = v4l2_subdev_routing_validate(sd, routing, - V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1 | + V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX); if (ret) return ret; @@ -2855,12 +2847,11 @@ static int ub960_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, struct v4l2_mbus_frame_desc *fd) { struct ub960_data *priv = sd_to_ub960(sd); - const struct v4l2_subdev_krouting *routing; struct v4l2_subdev_route *route; struct v4l2_subdev_state *state; int ret = 0; struct device *dev = &priv->client->dev; - u8 vc_map[UB960_MAX_RX_NPORTS] = { }; + u8 vc_map[UB960_MAX_RX_NPORTS] = {}; if (!ub960_pad_is_source(priv, pad)) return -EINVAL; @@ -2873,9 +2864,7 @@ static int ub960_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, ub960_get_vc_maps(priv, state, vc_map); - routing = &state->routing; - - for_each_active_route(routing, route) { + for_each_active_route(&state->routing, route) { struct v4l2_mbus_frame_desc_entry *source_entry = NULL; struct v4l2_mbus_frame_desc source_fd; unsigned int nport; @@ -2886,9 +2875,9 @@ static int ub960_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, nport = ub960_pad_to_port(priv, route->sink_pad); - ret = v4l2_subdev_call(priv->rxports[nport]->source_sd, pad, + ret = v4l2_subdev_call(priv->rxports[nport]->source.sd, pad, get_frame_desc, - priv->rxports[nport]->source_sd_pad, + priv->rxports[nport]->source.pad, &source_fd); if (ret) { dev_err(dev, @@ -2897,11 +2886,12 @@ static int ub960_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad, goto out_unlock; } - for (i = 0; i < source_fd.num_entries; ++i) + for (i = 0; i < source_fd.num_entries; ++i) { if (source_fd.entry[i].stream == route->sink_stream) { source_entry = &source_fd.entry[i]; break; } + } if (!source_entry) { dev_err(dev, @@ -2966,7 +2956,12 @@ static int ub960_set_fmt(struct v4l2_subdev *sd, if (ub960_pad_is_source(priv, format->pad)) return v4l2_subdev_get_fmt(sd, state, format); - /* TODO: implement fmt validation */ + /* + * Default to the first format if the requested media bus code isn't + * supported. + */ + if (!ub960_find_format(format->format.code)) + format->format.code = ub960_formats[0].code; fmt = v4l2_subdev_state_get_stream_format(state, format->pad, format->stream); @@ -3027,12 +3022,14 @@ static int ub960_log_status(struct v4l2_subdev *sd) struct device *dev = &priv->client->dev; struct v4l2_subdev_state *state; unsigned int nport; - u8 v = 0, v1 = 0, v2 = 0; + unsigned int i; + u16 v16 = 0; + u8 v = 0; u8 id[7]; state = v4l2_subdev_lock_and_get_active_state(sd); - for (unsigned int i = 0; i < 6; ++i) + for (i = 0; i < 6; ++i) ub960_read(priv, UB960_SR_FPD3_RX_ID(i), &id[i]); id[6] = 0; @@ -3048,25 +3045,21 @@ static int ub960_log_status(struct v4l2_subdev *sd) continue; } - ub960_csiport_read(priv, nport, UB960_TR_CSI_STS, &v); + ub960_txport_read(priv, nport, UB960_TR_CSI_STS, &v); dev_info(dev, "\tsync %u, pass %u\n", v & (u8)BIT(1), v & (u8)BIT(0)); - ub960_read(priv, UB960_SR_CSI_FRAME_COUNT_HI(nport), &v1); - ub960_read(priv, UB960_SR_CSI_FRAME_COUNT_LO(nport), &v2); - dev_info(dev, "\tframe counter %u\n", (v1 << 8) | v2); + ub960_read16(priv, UB960_SR_CSI_FRAME_COUNT_HI(nport), &v16); + dev_info(dev, "\tframe counter %u\n", v16); - ub960_read(priv, UB960_SR_CSI_FRAME_ERR_COUNT_HI(nport), &v1); - ub960_read(priv, UB960_SR_CSI_FRAME_ERR_COUNT_LO(nport), &v2); - dev_info(dev, "\tframe error counter %u\n", (v1 << 8) | v2); + ub960_read16(priv, UB960_SR_CSI_FRAME_ERR_COUNT_HI(nport), &v16); + dev_info(dev, "\tframe error counter %u\n", v16); - ub960_read(priv, UB960_SR_CSI_LINE_COUNT_HI(nport), &v1); - ub960_read(priv, UB960_SR_CSI_LINE_COUNT_LO(nport), &v2); - dev_info(dev, "\tline counter %u\n", (v1 << 8) | v2); + ub960_read16(priv, UB960_SR_CSI_LINE_COUNT_HI(nport), &v16); + dev_info(dev, "\tline counter %u\n", v16); - ub960_read(priv, UB960_SR_CSI_LINE_ERR_COUNT_HI(nport), &v1); - ub960_read(priv, UB960_SR_CSI_LINE_ERR_COUNT_LO(nport), &v2); - dev_info(dev, "\tline error counter %u\n", (v1 << 8) | v2); + ub960_read16(priv, UB960_SR_CSI_LINE_ERR_COUNT_HI(nport), &v16); + dev_info(dev, "\tline error counter %u\n", v16); } for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { @@ -3093,22 +3086,17 @@ static int ub960_log_status(struct v4l2_subdev *sd) ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2, &v); dev_info(dev, "\trx_port_sts2 %#02x\n", v); - ub960_rxport_read(priv, nport, UB960_RR_RX_FREQ_HIGH, &v1); - ub960_rxport_read(priv, nport, UB960_RR_RX_FREQ_LOW, &v2); - dev_info(dev, "\tlink freq %u MHz\n", - v1 * 1000000 + v2 * 1000000 / 256); + ub960_rxport_read16(priv, nport, UB960_RR_RX_FREQ_HIGH, &v16); + dev_info(dev, "\tlink freq %llu Hz\n", (v16 * 1000000ULL) >> 8); - ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v1); - ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_LO, &v2); - dev_info(dev, "\tparity errors %u\n", (v1 << 8) | v2); + ub960_rxport_read16(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v16); + dev_info(dev, "\tparity errors %u\n", v16); - ub960_rxport_read(priv, nport, UB960_RR_LINE_COUNT_HI, &v1); - ub960_rxport_read(priv, nport, UB960_RR_LINE_COUNT_LO, &v2); - dev_info(dev, "\tlines per frame %u\n", (v1 << 8) | v2); + ub960_rxport_read16(priv, nport, UB960_RR_LINE_COUNT_HI, &v16); + dev_info(dev, "\tlines per frame %u\n", v16); - ub960_rxport_read(priv, nport, UB960_RR_LINE_LEN_1, &v1); - ub960_rxport_read(priv, nport, UB960_RR_LINE_LEN_0, &v2); - dev_info(dev, "\tbytes per line %u\n", (v1 << 8) | v2); + ub960_rxport_read16(priv, nport, UB960_RR_LINE_LEN_1, &v16); + dev_info(dev, "\tbytes per line %u\n", v16); ub960_rxport_read(priv, nport, UB960_RR_CSI_ERR_COUNTER, &v); dev_info(dev, "\tcsi_err_counter %u\n", v); @@ -3180,7 +3168,6 @@ static const struct v4l2_subdev_core_ops ub960_subdev_core_ops = { static const struct v4l2_subdev_ops ub960_subdev_ops = { .core = &ub960_subdev_core_ops, - .video = &ub960_video_ops, .pad = &ub960_pad_ops, }; @@ -3190,115 +3177,6 @@ static const struct media_entity_operations ub960_entity_ops = { .has_pad_interdep = v4l2_subdev_has_pad_interdep, }; -static void ub960_enable_tpg(struct ub960_data *priv, int tpg_num) -{ - /* - * Note: no need to write UB960_REG_IND_ACC_CTL: the only indirect - * registers target we use is "CSI-2 Pattern Generator & Timing - * Registers", which is the default - */ - - /* - * TPG can only provide a single stream per CSI TX port. If - * multiple streams are currently enabled, only the first - * one will use the TPG, other streams will be halted. - */ - - struct v4l2_mbus_framefmt *fmt; - u8 vbp, vfp; - u16 blank_lines; - u16 width; - u16 height; - - u16 bytespp = 2; /* For MEDIA_BUS_FMT_UYVY8_1X16 */ - u8 cbars_idx = tpg_num - TEST_PATTERN_V_COLOR_BARS_1; - u8 num_cbars = 1 << cbars_idx; - - u16 line_size; /* Line size [bytes] */ - u16 bar_size; /* cbar size [bytes] */ - u16 act_lpf; /* active lines/frame */ - u16 tot_lpf; /* tot lines/frame */ - u16 line_pd; /* Line period in 10-ns units */ - - struct v4l2_subdev_state *state; - - state = v4l2_subdev_get_locked_active_state(&priv->sd); - - vbp = 33; - vfp = 10; - blank_lines = vbp + vfp + 2; /* total blanking lines */ - - fmt = v4l2_subdev_state_get_stream_format(state, 4, 0); - if (!fmt) { - dev_err(&priv->client->dev, "failed to enable TPG\n"); - return; - } - - width = fmt->width; - height = fmt->height; - - line_size = width * bytespp; - bar_size = line_size / num_cbars; - act_lpf = height; - tot_lpf = act_lpf + blank_lines; - line_pd = 100000000 / 60 / tot_lpf; - - /* Disable forwarding from FPD-3 RX ports */ - ub960_read(priv, UB960_SR_FWD_CTL1, &priv->stored_fwd_ctl); - ub960_write(priv, UB960_SR_FWD_CTL1, 0xf << 4); - - ub960_write_ind(priv, UB960_IND_TARGET_PAT_GEN, UB960_IR_PGEN_CTL, - UB960_IR_PGEN_CTL_PGEN_ENABLE); - - /* YUV422 8bit: 2 bytes/block, CSI-2 data type 0x1e */ - ub960_write_ind(priv, UB960_IND_TARGET_PAT_GEN, UB960_IR_PGEN_CFG, - cbars_idx << 4 | 0x2); - ub960_write_ind(priv, UB960_IND_TARGET_PAT_GEN, UB960_IR_PGEN_CSI_DI, - 0x1e); - - ub960_write_ind16(priv, UB960_IND_TARGET_PAT_GEN, - UB960_IR_PGEN_LINE_SIZE1, line_size); - ub960_write_ind16(priv, UB960_IND_TARGET_PAT_GEN, - UB960_IR_PGEN_BAR_SIZE1, bar_size); - ub960_write_ind16(priv, UB960_IND_TARGET_PAT_GEN, - UB960_IR_PGEN_ACT_LPF1, act_lpf); - ub960_write_ind16(priv, UB960_IND_TARGET_PAT_GEN, - UB960_IR_PGEN_TOT_LPF1, tot_lpf); - ub960_write_ind16(priv, UB960_IND_TARGET_PAT_GEN, - UB960_IR_PGEN_LINE_PD1, line_pd); - ub960_write_ind(priv, UB960_IND_TARGET_PAT_GEN, UB960_IR_PGEN_VBP, vbp); - ub960_write_ind(priv, UB960_IND_TARGET_PAT_GEN, UB960_IR_PGEN_VFP, vfp); -} - -static void ub960_disable_tpg(struct ub960_data *priv) -{ - /* TPG off, enable forwarding from FPD-3 RX ports */ - ub960_write(priv, UB960_SR_FWD_CTL1, priv->stored_fwd_ctl); - - ub960_write_ind(priv, UB960_IND_TARGET_PAT_GEN, UB960_IR_PGEN_CTL, 0x00); -} - -static int ub960_s_ctrl(struct v4l2_ctrl *ctrl) -{ - struct ub960_data *priv = - container_of(ctrl->handler, struct ub960_data, ctrl_handler); - - switch (ctrl->id) { - case V4L2_CID_TEST_PATTERN: - if (ctrl->val == 0) - ub960_disable_tpg(priv); - else - ub960_enable_tpg(priv, ctrl->val); - break; - } - - return 0; -} - -static const struct v4l2_ctrl_ops ub960_ctrl_ops = { - .s_ctrl = ub960_s_ctrl, -}; - /* ----------------------------------------------------------------------------- * Core */ @@ -3317,7 +3195,9 @@ static irqreturn_t ub960_handle_events(int irq, void *arg) dev_dbg(&priv->client->dev, "INTERRUPT_STS %x\n", int_sts); - ub960_read(priv, UB960_SR_FWD_STS, &fwd_sts); + ret = ub960_read(priv, UB960_SR_FWD_STS, &fwd_sts); + if (ret) + return IRQ_NONE; dev_dbg(&priv->client->dev, "FWD_STS %#02x\n", fwd_sts); @@ -3353,7 +3233,7 @@ static void ub960_txport_free_ports(struct ub960_data *priv) { unsigned int nport; - for (nport = 0; nport < priv->hw_data->num_txports; nport++) { + for (nport = 0; nport < priv->hw_data->num_txports; ++nport) { struct ub960_txport *txport = priv->txports[nport]; if (!txport) @@ -3368,14 +3248,14 @@ static void ub960_rxport_free_ports(struct ub960_data *priv) { unsigned int nport; - for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { struct ub960_rxport *rxport = priv->rxports[nport]; if (!rxport) continue; - fwnode_handle_put(rxport->source_ep_fwnode); - fwnode_handle_put(rxport->remote_fwnode); + fwnode_handle_put(rxport->source.ep_fwnode); + fwnode_handle_put(rxport->ser.fwnode); kfree(rxport); priv->rxports[nport] = NULL; @@ -3386,6 +3266,7 @@ static int ub960_parse_dt_base(struct ub960_data *priv) { struct device *dev = &priv->client->dev; size_t table_size; + unsigned int i; u16 *aliases; int ret; @@ -3397,15 +3278,15 @@ static int ub960_parse_dt_base(struct ub960_data *priv) } table_size = ret; - priv->atr_alias_table.num_entries = ret; + priv->atr.num_aliases = ret; if (!table_size) return 0; - priv->atr_alias_table.entries = - devm_kcalloc(dev, table_size, - sizeof(struct atr_alias_table_entry), GFP_KERNEL); - if (!priv->atr_alias_table.entries) + priv->atr.aliases = devm_kcalloc(dev, table_size, + sizeof(struct atr_alias_table_entry), + GFP_KERNEL); + if (!priv->atr.aliases) return -ENOMEM; aliases = kcalloc(table_size, sizeof(u16), GFP_KERNEL); @@ -3421,8 +3302,8 @@ static int ub960_parse_dt_base(struct ub960_data *priv) return ret; } - for (unsigned int i = 0; i < table_size; ++i) - priv->atr_alias_table.entries[i].alias_id = aliases[i]; + for (i = 0; i < table_size; ++i) + priv->atr.aliases[i].alias_id = aliases[i]; kfree(aliases); @@ -3445,12 +3326,12 @@ ub960_parse_dt_rxport_link_properties(struct ub960_data *priv, u32 ser_i2c_alias; int ret; + cdr_mode = RXPORT_CDR_FPD3; + ret = fwnode_property_read_u32(link_fwnode, "ti,cdr-mode", &cdr_mode); - if (ret == -EINVAL) { - cdr_mode = RXPORT_CDR_FPD3; - } else if (ret < 0) { - dev_err(dev, "rx%u: failed to read 'ti,cdr-mode': %d\n", nport, - ret); + if (ret < 0 && ret != -EINVAL) { + dev_err(dev, "rx%u: failed to read '%s': %d\n", nport, + "ti,cdr-mode", ret); return ret; } @@ -3468,8 +3349,8 @@ ub960_parse_dt_rxport_link_properties(struct ub960_data *priv, ret = fwnode_property_read_u32(link_fwnode, "ti,rx-mode", &rx_mode); if (ret < 0) { - dev_err(dev, "rx%u: failed to read 'ti,rx-mode': %d\n", nport, - ret); + dev_err(dev, "rx%u: failed to read '%s': %d\n", nport, + "ti,rx-mode", ret); return ret; } @@ -3478,6 +3359,17 @@ ub960_parse_dt_rxport_link_properties(struct ub960_data *priv, return -EINVAL; } + switch (rx_mode) { + case RXPORT_MODE_RAW12_HF: + case RXPORT_MODE_RAW12_LF: + case RXPORT_MODE_CSI2_ASYNC: + dev_err(dev, "rx%u: unsupported 'ti,rx-mode' %u\n", nport, + rx_mode); + return -EINVAL; + default: + break; + } + rxport->rx_mode = rx_mode; /* EQ & Strobe related */ @@ -3491,9 +3383,8 @@ ub960_parse_dt_rxport_link_properties(struct ub960_data *priv, &strobe_pos); if (ret) { if (ret != -EINVAL) { - dev_err(dev, - "rx%u: failed to read 'ti,strobe-pos': %d\n", - nport, ret); + dev_err(dev, "rx%u: failed to read '%s': %d\n", nport, + "ti,strobe-pos", ret); return ret; } } else if (strobe_pos < UB960_MIN_MANUAL_STROBE_POS || @@ -3512,8 +3403,8 @@ ub960_parse_dt_rxport_link_properties(struct ub960_data *priv, ret = fwnode_property_read_u32(link_fwnode, "ti,eq-level", &eq_level); if (ret) { if (ret != -EINVAL) { - dev_err(dev, "rx%u: failed to read 'ti,eq-level': %d\n", - nport, ret); + dev_err(dev, "rx%u: failed to read '%s': %d\n", nport, + "ti,eq-level", ret); return ret; } } else if (eq_level > UB960_MAX_EQ_LEVEL) { @@ -3527,14 +3418,14 @@ ub960_parse_dt_rxport_link_properties(struct ub960_data *priv, ret = fwnode_property_read_u32(link_fwnode, "i2c-alias", &ser_i2c_alias); if (ret) { - dev_err(dev, "rx%u: failed to read 'i2c-alias': %d\n", nport, - ret); + dev_err(dev, "rx%u: failed to read '%s': %d\n", nport, + "i2c-alias", ret); return ret; } - rxport->ser_alias = ser_i2c_alias; + rxport->ser.alias = ser_i2c_alias; - rxport->remote_fwnode = fwnode_get_named_child_node(link_fwnode, "serializer"); - if (!rxport->remote_fwnode) { + rxport->ser.fwnode = fwnode_get_named_child_node(link_fwnode, "serializer"); + if (!rxport->ser.fwnode) { dev_err(dev, "rx%u: missing 'serializer' node\n", nport); return -EINVAL; } @@ -3547,12 +3438,14 @@ static int ub960_parse_dt_rxport_ep_properties(struct ub960_data *priv, struct ub960_rxport *rxport) { struct device *dev = &priv->client->dev; + struct v4l2_fwnode_endpoint vep = {}; unsigned int nport = rxport->nport; + bool hsync_hi; + bool vsync_hi; int ret; - u32 v; - rxport->source_ep_fwnode = fwnode_graph_get_remote_endpoint(ep_fwnode); - if (!rxport->source_ep_fwnode) { + rxport->source.ep_fwnode = fwnode_graph_get_remote_endpoint(ep_fwnode); + if (!rxport->source.ep_fwnode) { dev_err(dev, "rx%u: no remote endpoint\n", nport); return -ENODEV; } @@ -3568,28 +3461,24 @@ static int ub960_parse_dt_rxport_ep_properties(struct ub960_data *priv, return 0; } - ret = fwnode_property_read_u32(ep_fwnode, "hsync-active", &v); + vep.bus_type = V4L2_MBUS_PARALLEL; + ret = v4l2_fwnode_endpoint_parse(ep_fwnode, &vep); if (ret) { - dev_err(dev, "rx%u: failed to parse 'hsync-active': %d\n", - nport, ret); + dev_err(dev, "rx%u: failed to parse endpoint data\n", nport); goto err_put_source_ep_fwnode; } - rxport->lv_fv_pol |= v ? UB960_RR_PORT_CONFIG2_LV_POL_LOW : 0; + hsync_hi = !!(vep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH); + vsync_hi = !!(vep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH); - ret = fwnode_property_read_u32(ep_fwnode, "vsync-active", &v); - if (ret) { - dev_err(dev, "rx%u: failed to parse 'vsync-active': %d\n", - nport, ret); - goto err_put_source_ep_fwnode; - } - - rxport->lv_fv_pol |= v ? UB960_RR_PORT_CONFIG2_FV_POL_LOW : 0; + /* LineValid and FrameValid are inverse to the h/vsync active */ + rxport->lv_fv_pol = (hsync_hi ? UB960_RR_PORT_CONFIG2_LV_POL_LOW : 0) | + (vsync_hi ? UB960_RR_PORT_CONFIG2_FV_POL_LOW : 0); return 0; err_put_source_ep_fwnode: - fwnode_handle_put(rxport->source_ep_fwnode); + fwnode_handle_put(rxport->source.ep_fwnode); return ret; } @@ -3597,8 +3486,8 @@ static int ub960_parse_dt_rxport(struct ub960_data *priv, unsigned int nport, struct fwnode_handle *link_fwnode, struct fwnode_handle *ep_fwnode) { - const char *vpoc_names[UB960_MAX_RX_NPORTS] = { "vpoc0", "vpoc1", - "vpoc2", "vpoc3" }; + static const char *vpoc_names[UB960_MAX_RX_NPORTS] = { "vpoc0", "vpoc1", + "vpoc2", "vpoc3" }; struct device *dev = &priv->client->dev; struct ub960_rxport *rxport; int ret; @@ -3635,7 +3524,7 @@ static int ub960_parse_dt_rxport(struct ub960_data *priv, unsigned int nport, return 0; err_put_remote_fwnode: - fwnode_handle_put(rxport->remote_fwnode); + fwnode_handle_put(rxport->ser.fwnode); err_free_rxport: priv->rxports[nport] = NULL; kfree(rxport); @@ -3661,10 +3550,8 @@ ub960_fwnode_get_link_by_regs(struct fwnode_handle *links_fwnode, return NULL; } - if (nport == link_num) { - fwnode_handle_put(link_fwnode); + if (nport == link_num) return link_fwnode; - } } return NULL; @@ -3733,10 +3620,11 @@ static int ub960_parse_dt_txports(struct ub960_data *priv) int ret; for (nport = 0; nport < priv->hw_data->num_txports; ++nport) { + unsigned int port = nport + priv->hw_data->num_rxports; struct fwnode_handle *ep_fwnode; ep_fwnode = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), - nport + priv->hw_data->num_rxports, 0, 0); + port, 0, 0); if (!ep_fwnode) continue; @@ -3787,40 +3675,34 @@ static int ub960_notify_bound(struct v4l2_async_notifier *notifier, int ret; ret = media_entity_get_fwnode_pad(&subdev->entity, - rxport->source_ep_fwnode, + rxport->source.ep_fwnode, MEDIA_PAD_FL_SOURCE); if (ret < 0) { dev_err(dev, "Failed to find pad for %s\n", subdev->name); return ret; } - rxport->source_sd = subdev; - rxport->source_sd_pad = ret; + rxport->source.sd = subdev; + rxport->source.pad = ret; - ret = media_create_pad_link(&rxport->source_sd->entity, - rxport->source_sd_pad, &priv->sd.entity, - nport, + ret = media_create_pad_link(&rxport->source.sd->entity, + rxport->source.pad, &priv->sd.entity, nport, MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); if (ret) { dev_err(dev, "Unable to link %s:%u -> %s:%u\n", - rxport->source_sd->name, rxport->source_sd_pad, + rxport->source.sd->name, rxport->source.pad, priv->sd.name, nport); return ret; } - dev_dbg(dev, "Bound %s pad: %u on index %u\n", subdev->name, - rxport->source_sd_pad, nport); - for (i = 0; i < priv->hw_data->num_rxports; ++i) { - if (priv->rxports[i] && !priv->rxports[i]->source_sd) { + if (priv->rxports[i] && !priv->rxports[i]->source.sd) { dev_dbg(dev, "Waiting for more subdevs to be bound\n"); return 0; } } - dev_dbg(dev, "All subdevs bound\n"); - return 0; } @@ -3830,7 +3712,7 @@ static void ub960_notify_unbind(struct v4l2_async_notifier *notifier, { struct ub960_rxport *rxport = to_ub960_asd(asd)->rxport; - rxport->source_sd = NULL; + rxport->source.sd = NULL; } static const struct v4l2_async_notifier_operations ub960_notify_ops = { @@ -3854,7 +3736,7 @@ static int ub960_v4l2_notifier_register(struct ub960_data *priv) continue; asd = v4l2_async_nf_add_fwnode(&priv->notifier, - rxport->source_ep_fwnode, + rxport->source.ep_fwnode, struct ub960_asd); if (IS_ERR(asd)) { dev_err(dev, "Failed to add subdev for source %u: %pe", @@ -3891,14 +3773,10 @@ static int ub960_create_subdev(struct ub960_data *priv) int ret; v4l2_i2c_subdev_init(&priv->sd, priv->client, &ub960_subdev_ops); + v4l2_ctrl_handler_init(&priv->ctrl_handler, 1); priv->sd.ctrl_handler = &priv->ctrl_handler; - v4l2_ctrl_new_std_menu_items(&priv->ctrl_handler, &ub960_ctrl_ops, - V4L2_CID_TEST_PATTERN, - ARRAY_SIZE(ub960_tpg_qmenu) - 1, 0, 0, - ub960_tpg_qmenu); - v4l2_ctrl_new_int_menu(&priv->ctrl_handler, NULL, V4L2_CID_LINK_FREQ, ARRAY_SIZE(priv->tx_link_freq) - 1, 0, priv->tx_link_freq); @@ -3913,7 +3791,7 @@ static int ub960_create_subdev(struct ub960_data *priv) priv->sd.entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; priv->sd.entity.ops = &ub960_entity_ops; - for (i = 0; i < priv->hw_data->num_rxports + priv->hw_data->num_txports; i++) { + for (i = 0; i < priv->hw_data->num_rxports + priv->hw_data->num_txports; ++i) { priv->pads[i].flags = ub960_pad_is_sink(priv, i) ? MEDIA_PAD_FL_SINK : MEDIA_PAD_FL_SOURCE; @@ -3935,7 +3813,7 @@ static int ub960_create_subdev(struct ub960_data *priv) ret = ub960_v4l2_notifier_register(priv); if (ret) { dev_err(dev, "v4l2 subdev notifier register failed: %d\n", ret); - goto err_free_state; + goto err_subdev_cleanup; } ret = v4l2_async_register_subdev(&priv->sd); @@ -3948,7 +3826,7 @@ static int ub960_create_subdev(struct ub960_data *priv) err_unreg_notif: ub960_v4l2_notifier_unregister(priv); -err_free_state: +err_subdev_cleanup: v4l2_subdev_cleanup(&priv->sd); err_entity_cleanup: media_entity_cleanup(&priv->sd.entity); @@ -4057,10 +3935,10 @@ static int ub960_enable_core_hw(struct ub960_data *priv) if (priv->pd_gpio) { gpiod_set_value_cansleep(priv->pd_gpio, 1); /* wait min 2 ms for reset to complete */ - usleep_range(2000, 5000); + fsleep(2000); gpiod_set_value_cansleep(priv->pd_gpio, 0); /* wait min 2 ms for power up to finish */ - usleep_range(2000, 5000); + fsleep(2000); } ub960_reset(priv, true); @@ -4088,7 +3966,18 @@ static int ub960_enable_core_hw(struct ub960_data *priv) clk_get_rate(priv->refclk) / 1000000); /* Disable all RX ports by default */ - ub960_write(priv, UB960_SR_RX_PORT_CTL, 0); + ret = ub960_write(priv, UB960_SR_RX_PORT_CTL, 0); + if (ret) + goto err_pd_gpio; + + /* release GPIO lock */ + if (priv->hw_data->is_ub9702) { + ret = ub960_update_bits(priv, UB960_SR_RESET, + UB960_SR_RESET_GPIO_LOCK_RELEASE, + UB960_SR_RESET_GPIO_LOCK_RELEASE); + if (ret) + goto err_pd_gpio; + } return 0; @@ -4112,6 +4001,9 @@ static int ub960_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct ub960_data *priv; + unsigned int port_lock_mask; + unsigned int port_mask; + unsigned int nport; int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); @@ -4123,7 +4015,7 @@ static int ub960_probe(struct i2c_client *client) priv->hw_data = device_get_match_data(dev); mutex_init(&priv->reg_lock); - mutex_init(&priv->atr_alias_table.lock); + mutex_init(&priv->atr.lock); INIT_DELAYED_WORK(&priv->poll_work, ub960_handler_work); @@ -4131,11 +4023,9 @@ static int ub960_probe(struct i2c_client *client) * Initialize these to invalid values so that the first reg writes will * configure the target. */ - priv->current_indirect_target = 0xff; - priv->current_read_rxport = 0xff; - priv->current_write_rxport_mask = 0xff; - priv->current_read_csiport = 0xff; - priv->current_write_csiport_mask = 0xff; + priv->reg_current.indirect_target = 0xff; + priv->reg_current.rxport = 0xff; + priv->reg_current.txport = 0xff; ret = ub960_get_hw_resources(priv); if (ret) @@ -4145,12 +4035,6 @@ static int ub960_probe(struct i2c_client *client) if (ret) goto err_mutex_destroy; - /* release GPIO lock */ - if (priv->hw_data->is_ub9702) - ub960_update_bits(priv, UB960_SR_RESET, - UB960_SR_RESET_GPIO_LOCK_RELEASE, - UB960_SR_RESET_GPIO_LOCK_RELEASE); - ret = ub960_parse_dt(priv); if (ret) goto err_disable_core_hw; @@ -4169,7 +4053,26 @@ static int ub960_probe(struct i2c_client *client) ub960_reset(priv, false); - ub960_rxport_wait_locks(priv, GENMASK(3, 0), NULL); + port_mask = 0; + + for (nport = 0; nport < priv->hw_data->num_rxports; ++nport) { + struct ub960_rxport *rxport = priv->rxports[nport]; + + if (!rxport) + continue; + + port_mask |= BIT(nport); + } + + ret = ub960_rxport_wait_locks(priv, port_mask, &port_lock_mask); + if (ret) + goto err_disable_vpocs; + + if (port_mask != port_lock_mask) { + ret = -EIO; + dev_err_probe(dev, ret, "Failed to lock all RX ports\n"); + goto err_disable_vpocs; + } /* * Clear any errors caused by switching the RX port settings while @@ -4209,7 +4112,7 @@ static int ub960_probe(struct i2c_client *client) err_disable_core_hw: ub960_disable_core_hw(priv); err_mutex_destroy: - mutex_destroy(&priv->atr_alias_table.lock); + mutex_destroy(&priv->atr.lock); mutex_destroy(&priv->reg_lock); return ret; } @@ -4228,7 +4131,7 @@ static void ub960_remove(struct i2c_client *client) ub960_rxport_free_ports(priv); ub960_txport_free_ports(priv); ub960_disable_core_hw(priv); - mutex_destroy(&priv->atr_alias_table.lock); + mutex_destroy(&priv->atr.lock); mutex_destroy(&priv->reg_lock); } diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c index dd3c2d86f96e..e513b859a7df 100644 --- a/drivers/media/v4l2-core/v4l2-subdev.c +++ b/drivers/media/v4l2-core/v4l2-subdev.c @@ -1661,10 +1661,11 @@ int v4l2_subdev_routing_validate(struct v4l2_subdev *sd, } /* - * V4L2_SUBDEV_ROUTING_NO_STREAM_MIX: Streams on the same pad - * may not be routed to streams on different pads. + * V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX: Streams on the same + * sink pad may not be routed to streams on different source + * pads. */ - if (disallow & V4L2_SUBDEV_ROUTING_NO_STREAM_MIX) { + if (disallow & V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX) { if (remote_pads[route->sink_pad] != U32_MAX && remote_pads[route->sink_pad] != route->source_pad) { dev_dbg(sd->dev, @@ -1673,6 +1674,15 @@ int v4l2_subdev_routing_validate(struct v4l2_subdev *sd, goto out; } + remote_pads[route->sink_pad] = route->source_pad; + } + + /* + * V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX: Streams on the same + * source pad may not be routed to streams on different sink + * pads. + */ + if (disallow & V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX) { if (remote_pads[route->source_pad] != U32_MAX && remote_pads[route->source_pad] != route->sink_pad) { dev_dbg(sd->dev, @@ -1681,7 +1691,6 @@ int v4l2_subdev_routing_validate(struct v4l2_subdev *sd, goto out; } - remote_pads[route->sink_pad] = route->source_pad; remote_pads[route->source_pad] = route->sink_pad; } diff --git a/include/linux/i2c-atr.h b/include/linux/i2c-atr.h index 721d08a6ff9b..7596f70ce1ab 100644 --- a/include/linux/i2c-atr.h +++ b/include/linux/i2c-atr.h @@ -67,6 +67,8 @@ void i2c_atr_delete(struct i2c_atr *atr); * @atr: The I2C ATR * @chan_id: Index of the new adapter (0 .. max_adapters-1). This value is * passed to the callbacks in `struct i2c_atr_ops`. + * @adapter_parent: The device used as the parent of the new i2c adapter, or NULL + * to use the i2c-atr device as the parent. * @bus_handle: The fwnode handle that points to the adapter's i2c * peripherals, or NULL. * @@ -84,6 +86,7 @@ void i2c_atr_delete(struct i2c_atr *atr); * Return: 0 on success, a negative error code otherwise. */ int i2c_atr_add_adapter(struct i2c_atr *atr, u32 chan_id, + struct device *adapter_parent, struct fwnode_handle *bus_handle); /** diff --git a/include/media/i2c/ds90ub9xx.h b/include/media/i2c/ds90ub9xx.h index 42d47d732c03..0245198469ec 100644 --- a/include/media/i2c/ds90ub9xx.h +++ b/include/media/i2c/ds90ub9xx.h @@ -7,6 +7,12 @@ struct i2c_atr; +/** + * struct ds90ub9xx_platform_data - platform data for FPD-Link Serializers. + * @port: Deserializer RX port for this Serializer + * @atr: I2C ATR + * @bc_rate: back-channel clock rate + */ struct ds90ub9xx_platform_data { u32 port; struct i2c_atr *atr; diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h index 6a77aa9bb1da..f11103122e53 100644 --- a/include/media/v4l2-subdev.h +++ b/include/media/v4l2-subdev.h @@ -1638,19 +1638,29 @@ u64 v4l2_subdev_state_xlate_streams(const struct v4l2_subdev_state *state, * @V4L2_SUBDEV_ROUTING_NO_N_TO_1: * multiple input streams may not be routed to the same output stream * (stream merging) - * @V4L2_SUBDEV_ROUTING_NO_STREAM_MIX: - * streams on the same pad may not be routed to streams on different pads + * @V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX: + * streams on the same sink pad may not be routed to streams on different + * source pads + * @V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX: + * streams on the same source pad may not be routed to streams on different + * sink pads * @V4L2_SUBDEV_ROUTING_ONLY_1_TO_1: * only non-overlapping 1-to-1 stream routing is allowed (a combination of * @V4L2_SUBDEV_ROUTING_NO_1_TO_N and @V4L2_SUBDEV_ROUTING_NO_N_TO_1) + * @V4L2_SUBDEV_ROUTING_NO_STREAM_MIX: + * streams on the same pad may not be routed to streams on different pads */ enum v4l2_subdev_routing_restriction { V4L2_SUBDEV_ROUTING_NO_1_TO_N = BIT(0), V4L2_SUBDEV_ROUTING_NO_N_TO_1 = BIT(1), - V4L2_SUBDEV_ROUTING_NO_STREAM_MIX = BIT(2), + V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX = BIT(2), + V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX = BIT(3), V4L2_SUBDEV_ROUTING_ONLY_1_TO_1 = V4L2_SUBDEV_ROUTING_NO_1_TO_N | V4L2_SUBDEV_ROUTING_NO_N_TO_1, + V4L2_SUBDEV_ROUTING_NO_STREAM_MIX = + V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX | + V4L2_SUBDEV_ROUTING_NO_SOURCE_STREAM_MIX, }; /**