From patchwork Wed Feb 8 19:01:57 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Abel Vesa X-Patchwork-Id: 651855 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9CD27C678D5 for ; Wed, 8 Feb 2023 19:02:16 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231510AbjBHTCP (ORCPT ); Wed, 8 Feb 2023 14:02:15 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:54046 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231477AbjBHTCN (ORCPT ); Wed, 8 Feb 2023 14:02:13 -0500 Received: from mail-wm1-x334.google.com (mail-wm1-x334.google.com [IPv6:2a00:1450:4864:20::334]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id ABE5B4DBF4 for ; Wed, 8 Feb 2023 11:02:10 -0800 (PST) Received: by mail-wm1-x334.google.com with SMTP id hn2-20020a05600ca38200b003dc5cb96d46so2187608wmb.4 for ; Wed, 08 Feb 2023 11:02:10 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=VFb0j1iNnby6pqy0hFVH2kKNe/PHf2EHoECIMHT6ro4=; b=PBFsdr6W+r2kBQJWmZOrM2n97oSoAcFGe+DnxQ96q3DLzg99LtCGjZDKiQLpAsXV/n biTv/9JqnSClI46TcC3EqA/A1XgfVav3FEwtV6tq7+27DAPuQn1+tI1xyQf64Ir0N2HX DjLtFCe/j6sBQlVwwmCOeeS+/qRZ6yed/qeSGv6wQsZ/32DTUGZ8eKGIo2yZ8Ct6dkbc +4eQFsPEK36dbGKRI9yS1s8s95RefRTkOf/B1qLmYogi4cvv0l4Jw62Qe3Fw17NGeLuQ Vr0PE1EfyDxqgOa2N/HcqLeeNjULs34eEvfvImMFeUSMZHqnFiHuAFrLsYHaMocaZzFm YiMQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=VFb0j1iNnby6pqy0hFVH2kKNe/PHf2EHoECIMHT6ro4=; b=Jmt0SpdojTStrC7DIjJ0JcF4xNOq9AHgVZ5i74fcM8FkK8jhYdWdW9m6MwI24B+uhr tFv6kJynci8MX6oKq8LpwU+PRgcbHjpjupstXDX6DkGD5SfudQqkjBHKYoMK+3FTvJyQ QivsGoB/2nffs3bEcKvjSCE8yKyDN/fFF+ra+x5nZRYoN8rqgry9SPe2Yv9WLlvXwKDe 0LSScg8OwP3+Yh/u5qAFXEkbYSqeQVMiAIlQ+QXwEwk9hoqWHZ86JwRRsLc6ro2Ww8TD vgch6lz5gVTKnKFUdvqlkPy6h1Tg3Nt0w1LD8KT/iKr4sTGXQYQyUepk46WsRIFkYwhI a9TQ== X-Gm-Message-State: AO0yUKWlbvCqN13dbYaRlNRHIiSdWiXS2nGgDk+b0AEwWbtx6DWakVZ5 u7yfVNrxi/9gN0+1FpDGcu5YeQ== X-Google-Smtp-Source: AK7set8cxh70IH9n74WqfPTkt9+gdAZuXTM4l65kEEiNYqIdtdKl4Z5fL7YwpaL06fibq1hNUbD/0Q== X-Received: by 2002:a05:600c:3416:b0:3df:57aa:db52 with SMTP id y22-20020a05600c341600b003df57aadb52mr7261209wmp.4.1675882930224; Wed, 08 Feb 2023 11:02:10 -0800 (PST) Received: from hackbox.lan ([94.52.112.99]) by smtp.gmail.com with ESMTPSA id n16-20020a1c7210000000b003dc1d668866sm2650327wmc.10.2023.02.08.11.02.08 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 08 Feb 2023 11:02:09 -0800 (PST) From: Abel Vesa To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Lee Jones , Rob Herring , Krzysztof Kozlowski , "vkoul@kernel.org" , Kishon Vijay Abraham I , Johan Hovold Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org, devicetree@vger.kernel.org, Linux Kernel Mailing List Subject: [PATCH v5 4/7] phy: qcom: Add QCOM SNPS eUSB2 repeater driver Date: Wed, 8 Feb 2023 21:01:57 +0200 Message-Id: <20230208190200.2966723-5-abel.vesa@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230208190200.2966723-1-abel.vesa@linaro.org> References: <20230208190200.2966723-1-abel.vesa@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org PM8550B contains a eUSB2 repeater used for making the eUSB2 from SM8550 USB 2.0 compliant. This can be modelled SW-wise as a Phy. So add a new phy driver for it. Signed-off-by: Abel Vesa --- The v4 is here: https://lore.kernel.org/all/20230207135551.1418637-5-abel.vesa@linaro.org/ Changes since v4: * none Changes since v3: * fixed all indentation issues and dropped a few blank lines to pass checkpatch * dropped shift defines as they were not used * dropped the repeater_mode as it was not used * dropped the of_node_get and of_node_put for of_node * dropped the comment related to regulators in eusb2_repeater_cfg, like Vinod suggested * dropped the initialization of ret in eusb2_repeater_init drivers/phy/qualcomm/Kconfig | 9 + drivers/phy/qualcomm/Makefile | 1 + .../phy/qualcomm/phy-qcom-eusb2-repeater.c | 259 ++++++++++++++++++ 3 files changed, 269 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index 513322cdf83c..4850d48f31fa 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -121,6 +121,15 @@ config PHY_QCOM_SNPS_EUSB2 chipsets. The PHY is paired with a Synopsys DWC3 USB controller on Qualcomm SOCs. +config PHY_QCOM_EUSB2_REPEATER + tristate "Qualcomm SNPS eUSB2 Repeater Driver" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable support for the USB high-speed SNPS eUSB2 repeater on Qualcomm + PMICs. The repeater is paired with a Synopsys eUSB2 Phy + on Qualcomm SOCs. + config PHY_QCOM_USB_HS tristate "Qualcomm USB HS PHY module" depends on USB_ULPI_BUS diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index b2c01665622b..de3dc9ccf067 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_PHY_QCOM_QMP_USB) += phy-qcom-qmp-usb.o obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o obj-$(CONFIG_PHY_QCOM_SNPS_EUSB2) += phy-qcom-snps-eusb2.o +obj-$(CONFIG_PHY_QCOM_EUSB2_REPEATER) += phy-qcom-eusb2-repeater.o obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c new file mode 100644 index 000000000000..3f265ac2df20 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c @@ -0,0 +1,259 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2023, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include + +/* eUSB2 status registers */ +#define EUSB2_RPTR_STATUS 0x08 +#define RPTR_OK BIT(7) + +/* eUSB2 control registers */ +#define EUSB2_EN_CTL1 0x46 +#define EUSB2_RPTR_EN BIT(7) + +#define EUSB2_FORCE_EN_5 0xe8 +#define F_CLK_19P2M_EN BIT(6) + +#define EUSB2_FORCE_VAL_5 0xeD +#define V_CLK_19P2M_EN BIT(6) + +#define EUSB2_TUNE_IUSB2 0x51 +#define EUSB2_TUNE_SQUELCH_U 0x54 +#define EUSB2_TUNE_USB2_PREEM 0x57 + +#define QCOM_EUSB2_REPEATER_INIT_CFG(o, v) \ + { \ + .offset = o, \ + .val = v, \ + } + +struct eusb2_repeater_init_tbl { + unsigned int offset; + unsigned int val; +}; + +struct eusb2_repeater_cfg { + const struct eusb2_repeater_init_tbl *init_tbl; + int init_tbl_num; + const char * const *vreg_list; + int num_vregs; +}; + +struct eusb2_repeater { + struct device *dev; + struct regmap *regmap; + struct phy *phy; + struct regulator_bulk_data *vregs; + const struct eusb2_repeater_cfg *cfg; + u16 base; + enum phy_mode mode; +}; + +static const char * const pm8550b_vreg_l[] = { + "vdd18", "vdd3", +}; + +static const struct eusb2_repeater_init_tbl pm8550b_init_tbl[] = { + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_IUSB2, 0x8), + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_SQUELCH_U, 0x3), + QCOM_EUSB2_REPEATER_INIT_CFG(EUSB2_TUNE_USB2_PREEM, 0x5), +}; + +static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = { + .init_tbl = pm8550b_init_tbl, + .init_tbl_num = ARRAY_SIZE(pm8550b_init_tbl), + .vreg_list = pm8550b_vreg_l, + .num_vregs = ARRAY_SIZE(pm8550b_vreg_l), +}; + +static int eusb2_repeater_init_vregs(struct eusb2_repeater *rptr) +{ + int num = rptr->cfg->num_vregs; + struct device *dev = rptr->dev; + int i; + + rptr->vregs = devm_kcalloc(dev, num, sizeof(*rptr->vregs), GFP_KERNEL); + if (!rptr->vregs) + return -ENOMEM; + + for (i = 0; i < num; i++) + rptr->vregs[i].supply = rptr->cfg->vreg_list[i]; + + return devm_regulator_bulk_get(dev, num, rptr->vregs); +} + +static int eusb2_repeater_init(struct phy *phy) +{ + struct eusb2_repeater *rptr = phy_get_drvdata(phy); + const struct eusb2_repeater_init_tbl *init_tbl = rptr->cfg->init_tbl; + int num = rptr->cfg->init_tbl_num; + u32 val; + int ret; + int i; + + ret = regulator_bulk_enable(rptr->cfg->num_vregs, rptr->vregs); + if (ret) + return ret; + + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_EN_CTL1, + EUSB2_RPTR_EN, EUSB2_RPTR_EN); + + for (i = 0; i < num; i++) + regmap_update_bits(rptr->regmap, + rptr->base + init_tbl[i].offset, + init_tbl[i].val, init_tbl[i].val); + + ret = regmap_read_poll_timeout(rptr->regmap, + rptr->base + EUSB2_RPTR_STATUS, val, + val & RPTR_OK, 10, 5); + if (ret) + dev_err(rptr->dev, "initialization timed-out\n"); + + return ret; +} + +static int eusb2_repeater_set_mode(struct phy *phy, + enum phy_mode mode, int submode) +{ + struct eusb2_repeater *rptr = phy_get_drvdata(phy); + + switch (mode) { + case PHY_MODE_USB_HOST: + /* + * CM.Lx is prohibited when repeater is already into Lx state as + * per eUSB 1.2 Spec. Below implement software workaround until + * PHY and controller is fixing seen observation. + */ + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5, + F_CLK_19P2M_EN, F_CLK_19P2M_EN); + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5, + V_CLK_19P2M_EN, V_CLK_19P2M_EN); + break; + case PHY_MODE_USB_DEVICE: + /* + * In device mode clear host mode related workaround as there + * is no repeater reset available, and enable/disable of + * repeater doesn't clear previous value due to shared + * regulators (say host <-> device mode switch). + */ + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_EN_5, + F_CLK_19P2M_EN, 0); + regmap_update_bits(rptr->regmap, rptr->base + EUSB2_FORCE_VAL_5, + V_CLK_19P2M_EN, 0); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int eusb2_repeater_exit(struct phy *phy) +{ + struct eusb2_repeater *rptr = phy_get_drvdata(phy); + + return regulator_bulk_disable(rptr->cfg->num_vregs, rptr->vregs); +} + +static const struct phy_ops eusb2_repeater_ops = { + .init = eusb2_repeater_init, + .exit = eusb2_repeater_exit, + .set_mode = eusb2_repeater_set_mode, + .owner = THIS_MODULE, +}; + +static int eusb2_repeater_probe(struct platform_device *pdev) +{ + struct eusb2_repeater *rptr; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct device_node *np = dev->of_node; + u32 res; + int ret; + + rptr = devm_kzalloc(dev, sizeof(*rptr), GFP_KERNEL); + if (!rptr) + return -ENOMEM; + + rptr->dev = dev; + dev_set_drvdata(dev, rptr); + + rptr->cfg = of_device_get_match_data(dev); + if (!rptr->cfg) + return -EINVAL; + + rptr->regmap = dev_get_regmap(dev->parent, NULL); + if (!rptr->regmap) + return -ENODEV; + + ret = of_property_read_u32(np, "reg", &res); + if (ret < 0) + return ret; + + rptr->base = res; + + ret = eusb2_repeater_init_vregs(rptr); + if (ret < 0) { + dev_err(dev, "unable to get supplies\n"); + return ret; + } + + rptr->phy = devm_phy_create(dev, np, &eusb2_repeater_ops); + if (IS_ERR(rptr->phy)) { + dev_err(dev, "failed to create PHY: %d\n", ret); + return PTR_ERR(rptr->phy); + } + + phy_set_drvdata(rptr->phy, rptr); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + dev_info(dev, "Registered Qcom-eUSB2 repeater\n"); + + return 0; +} + +static int eusb2_repeater_remove(struct platform_device *pdev) +{ + struct eusb2_repeater *rptr = platform_get_drvdata(pdev); + + if (!rptr) + return 0; + + eusb2_repeater_exit(rptr->phy); + + return 0; +} + +static const struct of_device_id eusb2_repeater_of_match_table[] = { + { + .compatible = "qcom,pm8550b-eusb2-repeater", + .data = &pm8550b_eusb2_cfg, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, eusb2_repeater_of_match_table); + +static struct platform_driver eusb2_repeater_driver = { + .probe = eusb2_repeater_probe, + .remove = eusb2_repeater_remove, + .driver = { + .name = "qcom-eusb2-repeater", + .of_match_table = eusb2_repeater_of_match_table, + }, +}; + +module_platform_driver(eusb2_repeater_driver); + +MODULE_DESCRIPTION("Qualcomm PMIC eUSB2 Repeater driver"); +MODULE_LICENSE("GPL");