diff mbox series

[1/2] arm64: dts: mediatek: mt7622: drop serial clock-names

Message ID 20230123151634.370011-1-krzysztof.kozlowski@linaro.org
State Accepted
Commit d198081733f5d00661977ee1d18b292544b7f0a0
Headers show
Series [1/2] arm64: dts: mediatek: mt7622: drop serial clock-names | expand

Commit Message

Krzysztof Kozlowski Jan. 23, 2023, 3:16 p.m. UTC
The serial node does not use clock-names:

  mt7622-bananapi-bpi-r64.dtb: serial@1100c000: Unevaluated properties are not allowed ('clock-names' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/mediatek/mt7622.dtsi | 1 -
 1 file changed, 1 deletion(-)

Comments

Matthias Brugger Jan. 25, 2023, 2:32 p.m. UTC | #1
On 23/01/2023 16:16, Krzysztof Kozlowski wrote:
> The serial node does not use clock-names:
> 
>    mt7622-bananapi-bpi-r64.dtb: serial@1100c000: Unevaluated properties are not allowed ('clock-names' was unexpected)
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Both applied, thanks!

> ---
>   arch/arm64/boot/dts/mediatek/mt7622.dtsi | 1 -
>   1 file changed, 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> index 146e18b5b1f4..62487a3c4db1 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> @@ -526,7 +526,6 @@ btif: serial@1100c000 {
>   		reg = <0 0x1100c000 0 0x1000>;
>   		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
>   		clocks = <&pericfg CLK_PERI_BTIF_PD>;
> -		clock-names = "main";
>   		reg-shift = <2>;
>   		reg-io-width = <4>;
>   		status = "disabled";
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 146e18b5b1f4..62487a3c4db1 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -526,7 +526,6 @@  btif: serial@1100c000 {
 		reg = <0 0x1100c000 0 0x1000>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
 		clocks = <&pericfg CLK_PERI_BTIF_PD>;
-		clock-names = "main";
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		status = "disabled";