From patchwork Wed Jan 18 23:05:25 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Abel Vesa X-Patchwork-Id: 643872 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 24EC6C54EBE for ; Wed, 18 Jan 2023 23:05:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229811AbjARXFg (ORCPT ); Wed, 18 Jan 2023 18:05:36 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:55288 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229644AbjARXFe (ORCPT ); Wed, 18 Jan 2023 18:05:34 -0500 Received: from mail-wm1-x32d.google.com (mail-wm1-x32d.google.com [IPv6:2a00:1450:4864:20::32d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A41194A224 for ; Wed, 18 Jan 2023 15:05:33 -0800 (PST) Received: by mail-wm1-x32d.google.com with SMTP id c10-20020a05600c0a4a00b003db0636ff84so82832wmq.0 for ; Wed, 18 Jan 2023 15:05:33 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=j9t+nJhU1TxVP3oL4wSVLTcJWhtOVpj322EGpgkez6I=; b=Rf9IBBa2EREPtWcyRJFgglmlREzdh/V9lvpXwr+lw9TowUzVfNebwZQfbhBF51jVpV XdW591rkuoy0QDQlhRraYVH6mILifk5Mw9gTuY34hu/GNNufocJBLhhGKOn58oGsab7T K96Z8SBgBZZVFStdV3/rG5J5kB+edbrw0JWUVuGpsaFBoIuM0moNqbq9a2KezHiwZdR9 0O4CJhYXhA5YMqz5xTDqdToq92DHW90FS0WVVQ8iUQKxYxDc7Io5bXkbIpOeYFXXN1hk /uWm44zl0VZ96efkNtzqCx55tvOLBwChflpDpP5jS23GjtrCUNwoYzkS5hKa62Elr8Jq 3Lyw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=j9t+nJhU1TxVP3oL4wSVLTcJWhtOVpj322EGpgkez6I=; b=mby5zM8YEMfBVeTTvnYu4zoohROoTIUzvMn8fXSTM1nFG567K5cWioietmnIx/LZ4D vgjjtUzCnprKHbI8ASSPbx6PJj0U9Z9vChAX5yVF7CIZLvNBfC6AeJksktbgHgrwYYW7 SAJ/V5hDLeiiWw5lBrokLyYQItONm7FRRc8wCfR5+flbot+0KkZhhCKqr1kviL5JLzo+ qVmN3tJekk+VKeKKicZ64NBu77zi0/ZCbW3Eo6GwZDEWDoq5ttqI7Z2qWRxsShJFHQig Mf0baNvoFIALSaB7swpVqV12GI9k7kMEMemAlk/g6/YvoL/ySYM5k+yd6LrI1eDbYViV zpUA== X-Gm-Message-State: AFqh2kotDADceF6b9iOy4+eQWYyKH/YPxBfPr+9iJMXTFuWO7X7ii/xv hJ1iSM4Oc0KB9zi1ZT2M2idx7w== X-Google-Smtp-Source: AMrXdXujBlavBknrj2BIESAMAyZqiEaNxMVrPIzX7O6pNBXfYaZK9O56WhckY5iNXknYrgasLZm8Tg== X-Received: by 2002:a05:600c:2e14:b0:3d4:a1ba:a971 with SMTP id o20-20020a05600c2e1400b003d4a1baa971mr8045714wmf.24.1674083132188; Wed, 18 Jan 2023 15:05:32 -0800 (PST) Received: from hackbox.lan ([94.52.112.99]) by smtp.gmail.com with ESMTPSA id o2-20020a05600c510200b003c6f8d30e40sm3523314wms.31.2023.01.18.15.05.31 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 18 Jan 2023 15:05:31 -0800 (PST) From: Abel Vesa To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, Linux Kernel Mailing List Subject: [PATCH v2 1/2] arm64: dts: qcom: sm8550: Add PCIe PHYs and controllers nodes Date: Thu, 19 Jan 2023 01:05:25 +0200 Message-Id: <20230118230526.1499328-2-abel.vesa@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230118230526.1499328-1-abel.vesa@linaro.org> References: <20230118230526.1499328-1-abel.vesa@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add PCIe controllers and PHY nodes. Signed-off-by: Abel Vesa --- arch/arm64/boot/dts/qcom/sm8550.dtsi | 213 ++++++++++++++++++++++++++- 1 file changed, 210 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 3d47281a276b..a78068cbf95f 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -646,9 +646,9 @@ gcc: clock-controller@100000 { #reset-cells = <1>; #power-domain-cells = <1>; clocks = <&bi_tcxo_div2>, <&sleep_clk>, - <0>, - <0>, - <0>, + <&pcie0_phy>, + <&pcie1_phy>, + <&pcie_1_phy_aux_clk>, <&ufs_mem_phy 0>, <&ufs_mem_phy 1>, <&ufs_mem_phy 2>, @@ -1547,6 +1547,213 @@ mmss_noc: interconnect@1780000 { qcom,bcm-voters = <&apps_bcm_voter>; }; + pcie0: pci@1c00000 { + device_type = "pci"; + compatible = "qcom,pcie-sm8550"; + reg = <0 0x01c00000 0 0x3000>, + <0 0x60000000 0 0xf1d>, + <0 0x60000f20 0 0xa8>, + <0 0x60001000 0 0x1000>, + <0 0x60100000 0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>, + <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <0>; + num-lanes = <2>; + + interrupts = ; + interrupt-names = "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre0"; + + interconnect-names = "pcie-mem"; + interconnects = <&pcie_noc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>; + + iommus = <&apps_smmu 0x1400 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1400 0x1>, + <0x100 &apps_smmu 0x1401 0x1>; + + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "pci"; + + power-domains = <&gcc PCIE_0_GDSC>; + + phys = <&pcie0_phy>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "disabled"; + }; + + pcie0_phy: phy@1c06000 { + compatible = "qcom,sm8550-qmp-gen3x2-pcie-phy"; + reg = <0 0x01c06000 0 0x2000>; + + clocks = <&gcc GCC_PCIE_0_AUX_CLK>, + <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_0_CLKREF_EN>, + <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_0_PIPE_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe"; + + resets = <&gcc GCC_PCIE_0_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_0_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie0_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + + pcie1: pci@1c08000 { + device_type = "pci"; + compatible = "qcom,pcie-sm8550"; + reg = <0x0 0x01c08000 0x0 0x3000>, + <0x0 0x40000000 0x0 0xf1d>, + <0x0 0x40000f20 0x0 0xa8>, + <0x0 0x40001000 0x0 0x1000>, + <0x0 0x40100000 0x0 0x100000>; + reg-names = "parf", "dbi", "elbi", "atu", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x01000000 0x0 0x40200000 0 0x40200000 0x0 0x100000>, + <0x02000000 0x0 0x40300000 0 0x40300000 0x0 0x1fd00000>; + bus-range = <0x00 0xff>; + + dma-coherent; + + linux,pci-domain = <1>; + num-lanes = <2>; + + interrupts = ; + interrupt-names = "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + + clocks = <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&gcc GCC_PCIE_1_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_AXI_CLK>, + <&gcc GCC_PCIE_1_SLV_Q2A_AXI_CLK>, + <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>, + <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>, + <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>; + clock-names = "pipe", + "aux", + "cfg", + "bus_master", + "bus_slave", + "slave_q2a", + "ddrss_sf_tbu", + "aggre1", + "cnoc_pcie_sf_axi"; + + assigned-clocks = <&gcc GCC_PCIE_1_AUX_CLK>; + assigned-clock-rates = <19200000>; + + interconnect-names = "pcie-mem"; + interconnects = <&pcie_noc MASTER_PCIE_1 0 &mc_virt SLAVE_EBI1 0>; + + iommus = <&apps_smmu 0x1480 0x7f>; + iommu-map = <0x0 &apps_smmu 0x1480 0x1>, + <0x100 &apps_smmu 0x1481 0x1>; + + resets = <&gcc GCC_PCIE_1_BCR>, + <&gcc GCC_PCIE_1_LINK_DOWN_BCR>; + reset-names = "pci", + "pcie_1_link_down_reset"; + + power-domains = <&gcc PCIE_1_GDSC>; + + phys = <&pcie1_phy>; + phy-names = "pciephy"; + + perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + enable-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "disabled"; + }; + + pcie1_phy: phy@1c0e000 { + compatible = "qcom,sm8550-qmp-gen4x2-pcie-phy"; + reg = <0x0 0x01c0e000 0x0 0x2000>; + + clocks = <&gcc GCC_PCIE_1_AUX_CLK>, + <&gcc GCC_PCIE_1_CFG_AHB_CLK>, + <&tcsr TCSR_PCIE_1_CLKREF_EN>, + <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>, + <&gcc GCC_PCIE_1_PIPE_CLK>, + <&gcc GCC_PCIE_1_PHY_AUX_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "rchng", + "pipe", "aux_phy"; + + resets = <&gcc GCC_PCIE_1_PHY_BCR>, + <&gcc GCC_PCIE_1_NOCSR_COM_PHY_BCR>; + reset-names = "phy", "nocsr"; + + assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>; + assigned-clock-rates = <100000000>; + + power-domains = <&gcc PCIE_1_PHY_GDSC>; + + #clock-cells = <0>; + clock-output-names = "pcie1_pipe_clk"; + + #phy-cells = <0>; + + status = "disabled"; + }; + cryptobam: dma-controller@1dc4000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0 0x01dc4000 0x0 0x28000>;