@@ -3,4 +3,5 @@ dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb
dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb
dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb
dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-sev-kit.dtb
+dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-tysom-m.dtb
obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
new file mode 100644
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2022 Microchip Technology Inc */
+
+// #include "dt-bindings/mailbox/miv-ihc.h"
+
+/ {
+ fabric_clk3: fabric-clk3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <62500000>;
+ };
+
+ fabric_clk1: fabric-clk1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ pcie: pcie@2000000000 {
+ compatible = "microchip,pcie-host-1.0";
+ #address-cells = <0x3>;
+ #interrupt-cells = <0x1>;
+ #size-cells = <0x2>;
+ device_type = "pci";
+ reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
+ reg-names = "cfg", "apb";
+ bus-range = <0x0 0x7f>;
+ interrupt-parent = <&plic>;
+ interrupts = <119>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ interrupt-map-mask = <0 0 0 7>;
+ clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
+ clock-names = "fic0", "fic1", "fic3";
+ ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
+ msi-parent = <&pcie>;
+ msi-controller;
+ status = "disabled";
+ pcie_intc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+};
new file mode 100644
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Original all-in-one devicetree:
+ * Copyright (C) 2020-2022 - Aldec
+ * Rewritten to use includes:
+ * Copyright (C) 2022 - Conor Dooley <conor.dooley@microchip.com>
+ */
+
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-tysom-m-fabric.dtsi"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define MTIMER_FREQ 1000000
+
+/ {
+ model = "Aldec TySOM-M-MPFS250T-REV2";
+ compatible = "aldec,tysom-m-mpfs250t-rev2", "microchip,mpfs";
+
+ aliases {
+ ethernet0 = &mac0;
+ ethernet1 = &mac1;
+ serial0 = &mmuart0;
+ serial1 = &mmuart1;
+ serial2 = &mmuart2;
+ serial3 = &mmuart3;
+ serial4 = &mmuart4;
+ gpio0 = &gpio0;
+ gpio1 = &gpio2;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+
+ cpus {
+ timebase-frequency = <MTIMER_FREQ>;
+ };
+
+ ddrc_cache_lo: memory@80000000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x0 0x30000000>;
+ status = "okay";
+ };
+
+ ddrc_cache_hi: memory@1000000000 {
+ device_type = "memory";
+ reg = <0x10 0x00000000 0x0 0x40000000>;
+ status = "okay";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ status = "okay";
+
+ led0 {
+ gpios = <&gpio1 23 1>;
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+ hwmon: hwmon@45 {
+ status = "okay";
+ compatible = "ti,ina219";
+ reg = <0x45>;
+ shunt-resistor = <2000>;
+ };
+};
+
+&gpio1 {
+ interrupts = <27>, <28>, <29>, <30>,
+ <31>, <32>, <33>, <47>,
+ <35>, <36>, <37>, <38>,
+ <39>, <40>, <41>, <42>,
+ <43>, <44>, <45>, <46>,
+ <47>, <48>, <49>, <50>;
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ phy-mode = "gmii";
+ phy-handle = <&phy0>;
+
+};
+
+&mac1 {
+ status = "okay";
+ phy-mode = "gmii";
+ phy-handle = <&phy1>;
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&mbox {
+ status = "okay";
+};
+
+&mmc {
+ max-frequency = <200000000>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ no-1-8-v;
+ disable-wp;
+ status = "okay";
+};
+
+&mmuart1 {
+ status = "okay";
+};
+
+&mmuart2 {
+ status = "okay";
+};
+
+&mmuart3 {
+ status = "okay";
+};
+
+&mmuart4 {
+ status = "okay";
+};
+
+&refclk {
+ clock-frequency = <125000000>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+};
+
+&spi1 {
+ status = "okay";
+ flash@0 {
+ compatible = "micron,n25q128a11", "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <10000000>;
+ };
+};
+
+&syscontroller {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "host";
+};
The TySOM-M-MPFS250 is a compact SoC prototyping board featuring a Microchip PolarFire SoC MPFS250T-FCG1152. Features include: - 16 GiB FPGA DDR4 - 16 GiB MSS DDR4 with ECC (Although only 2 GiB is mapped in the FPGA design) - eMMC - SPI flash memory - 2x Ethernet 10/100/1000 - USB 2.0 - PCIe x4 Gen2 - HDMI OUT - 2x FMC connector (HPC and LPC) Specifically flag this board as rev2, in case later boards have an FPGA design revision with more of DDR available for use in Linux etc. Link: https://www.aldec.com/en/products/emulation/tysom_boards/polarfire_microchip/tysom_m_mpfs250 Signed-off-by: Conor Dooley <conor.dooley@microchip.com> --- Changes in v2: - removed some extra cells properties - changed filename compatible to rev2 - dropped pcie from fabric.dtsi, does not appear to be mapped to the MSS --- arch/riscv/boot/dts/microchip/Makefile | 1 + .../dts/microchip/mpfs-tysom-m-fabric.dtsi | 47 +++++ .../riscv/boot/dts/microchip/mpfs-tysom-m.dts | 165 ++++++++++++++++++ 3 files changed, 213 insertions(+) create mode 100644 arch/riscv/boot/dts/microchip/mpfs-tysom-m-fabric.dtsi create mode 100644 arch/riscv/boot/dts/microchip/mpfs-tysom-m.dts