diff mbox series

[v2,10/17] arm64: dts: qcom: sm8250: Pad addresses to 8 hex digits

Message ID 20230102094642.74254-11-konrad.dybcio@linaro.org
State Accepted
Commit 81f43efce4e1fdd2c65143dd05bd69fae563c3f0
Headers show
Series None | expand

Commit Message

Konrad Dybcio Jan. 2, 2023, 9:46 a.m. UTC
Some addresses were 7-hex-digits long, or less. Fix that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
v1 -> v2:
No changes

 arch/arm64/boot/dts/qcom/sm8250.dtsi | 54 ++++++++++++++--------------
 1 file changed, 27 insertions(+), 27 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 0b6a6a809503..a642ff1af094 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1899,10 +1899,10 @@  pcie0_phy: phy@1c06000 {
 			status = "disabled";
 
 			pcie0_lane: phy@1c06200 {
-				reg = <0 0x1c06200 0 0x170>, /* tx */
-				      <0 0x1c06400 0 0x200>, /* rx */
-				      <0 0x1c06800 0 0x1f0>, /* pcs */
-				      <0 0x1c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
+				reg = <0 0x01c06200 0 0x170>, /* tx */
+				      <0 0x01c06400 0 0x200>, /* rx */
+				      <0 0x01c06800 0 0x1f0>, /* pcs */
+				      <0 0x01c06c00 0 0xf4>; /* "pcs_lane" same as pcs_misc? */
 				clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
 				clock-names = "pipe0";
 
@@ -2005,12 +2005,12 @@  pcie1_phy: phy@1c0e000 {
 			status = "disabled";
 
 			pcie1_lane: phy@1c0e200 {
-				reg = <0 0x1c0e200 0 0x170>, /* tx0 */
-				      <0 0x1c0e400 0 0x200>, /* rx0 */
-				      <0 0x1c0ea00 0 0x1f0>, /* pcs */
-				      <0 0x1c0e600 0 0x170>, /* tx1 */
-				      <0 0x1c0e800 0 0x200>, /* rx1 */
-				      <0 0x1c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+				reg = <0 0x01c0e200 0 0x170>, /* tx0 */
+				      <0 0x01c0e400 0 0x200>, /* rx0 */
+				      <0 0x01c0ea00 0 0x1f0>, /* pcs */
+				      <0 0x01c0e600 0 0x170>, /* tx1 */
+				      <0 0x01c0e800 0 0x200>, /* rx1 */
+				      <0 0x01c0ee00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
 				clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
 				clock-names = "pipe0";
 
@@ -2094,7 +2094,7 @@  pcie2: pci@1c10000 {
 
 		pcie2_phy: phy@1c16000 {
 			compatible = "qcom,sm8250-qmp-modem-pcie-phy";
-			reg = <0 0x1c16000 0 0x1c0>;
+			reg = <0 0x01c16000 0 0x1c0>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -2113,12 +2113,12 @@  pcie2_phy: phy@1c16000 {
 			status = "disabled";
 
 			pcie2_lane: phy@1c16200 {
-				reg = <0 0x1c16200 0 0x170>, /* tx0 */
-				      <0 0x1c16400 0 0x200>, /* rx0 */
-				      <0 0x1c16a00 0 0x1f0>, /* pcs */
-				      <0 0x1c16600 0 0x170>, /* tx1 */
-				      <0 0x1c16800 0 0x200>, /* rx1 */
-				      <0 0x1c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
+				reg = <0 0x01c16200 0 0x170>, /* tx0 */
+				      <0 0x01c16400 0 0x200>, /* rx0 */
+				      <0 0x01c16a00 0 0x1f0>, /* pcs */
+				      <0 0x01c16600 0 0x170>, /* tx1 */
+				      <0 0x01c16800 0 0x200>, /* rx1 */
+				      <0 0x01c16e00 0 0xf4>; /* "pcs_com" same as pcs_misc? */
 				clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
 				clock-names = "pipe0";
 
@@ -3792,16 +3792,16 @@  camss: camss@ac6a000 {
 			compatible = "qcom,sm8250-camss";
 			status = "disabled";
 
-			reg = <0 0xac6a000 0 0x2000>,
-			      <0 0xac6c000 0 0x2000>,
-			      <0 0xac6e000 0 0x1000>,
-			      <0 0xac70000 0 0x1000>,
-			      <0 0xac72000 0 0x1000>,
-			      <0 0xac74000 0 0x1000>,
-			      <0 0xacb4000 0 0xd000>,
-			      <0 0xacc3000 0 0xd000>,
-			      <0 0xacd9000 0 0x2200>,
-			      <0 0xacdb200 0 0x2200>;
+			reg = <0 0x0ac6a000 0 0x2000>,
+			      <0 0x0ac6c000 0 0x2000>,
+			      <0 0x0ac6e000 0 0x1000>,
+			      <0 0x0ac70000 0 0x1000>,
+			      <0 0x0ac72000 0 0x1000>,
+			      <0 0x0ac74000 0 0x1000>,
+			      <0 0x0acb4000 0 0xd000>,
+			      <0 0x0acc3000 0 0xd000>,
+			      <0 0x0acd9000 0 0x2200>,
+			      <0 0x0acdb200 0 0x2200>;
 			reg-names = "csiphy0",
 				    "csiphy1",
 				    "csiphy2",