diff mbox series

[05/18] arm64: dts: qcom: ipq6018: Add/remove some newlines

Message ID 20221231125911.437599-6-konrad.dybcio@linaro.org
State Superseded
Headers show
Series [01/18] arm64: dts: qcom: ipq6018: Pad addresses to 8 hex digits | expand

Commit Message

Konrad Dybcio Dec. 31, 2022, 12:58 p.m. UTC 
Some lines were broken very aggresively, presumably to fit under 80 chars
and some places could have used a newline, particularly between subsequent
nodes. Address all that and remove redundant comments near PCIe ranges
while at it so as not to exceed 100 chars needlessly.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/ipq6018.dtsi | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 5452bb85f8e1..6b4f653239ab 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -102,26 +102,31 @@  opp-864000000 {
 			opp-microvolt = <725000>;
 			clock-latency-ns = <200000>;
 		};
+
 		opp-1056000000 {
 			opp-hz = /bits/ 64 <1056000000>;
 			opp-microvolt = <787500>;
 			clock-latency-ns = <200000>;
 		};
+
 		opp-1320000000 {
 			opp-hz = /bits/ 64 <1320000000>;
 			opp-microvolt = <862500>;
 			clock-latency-ns = <200000>;
 		};
+
 		opp-1440000000 {
 			opp-hz = /bits/ 64 <1440000000>;
 			opp-microvolt = <925000>;
 			clock-latency-ns = <200000>;
 		};
+
 		opp-1608000000 {
 			opp-hz = /bits/ 64 <1608000000>;
 			opp-microvolt = <987500>;
 			clock-latency-ns = <200000>;
 		};
+
 		opp-1800000000 {
 			opp-hz = /bits/ 64 <1800000000>;
 			opp-microvolt = <1062500>;
@@ -131,8 +136,7 @@  opp-1800000000 {
 
 	pmuv8: pmu {
 		compatible = "arm,cortex-a53-pmu";
-		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
-					 IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
 	psci: psci {
@@ -734,24 +738,18 @@  pcie0: pci@20000000 {
 			phys = <&pcie_phy0>;
 			phy-names = "pciephy";
 
-			ranges = <0x81000000 0 0x20200000 0 0x20200000
-				  0 0x10000>, /* downstream I/O */
-				 <0x82000000 0 0x20220000 0 0x20220000
-				  0 0xfde0000>; /* non-prefetchable memory */
+			ranges = <0x81000000 0 0x20200000 0 0x20200000 0 0x10000>,
+				 <0x82000000 0 0x20220000 0 0x20220000 0 0xfde0000>;
 
 			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 75
-					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 78
-					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 79
-					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 83
-					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,