diff mbox series

[v2,2/6] dt-bindings: usb: Add binding for Genesys Logic GL850G hub controller

Message ID 20221202081647.3183870-3-uwu@icenowy.me
State Superseded
Headers show
Series Rongpin RP-H6B support (and support for GL850G) | expand

Commit Message

Icenowy Zheng Dec. 2, 2022, 8:16 a.m. UTC
The Genesys Logic GL850G is a USB 2.0 Single TT hub controller that
features 4 downstream ports, an internal 5V-to-3.3V LDO regulator (can
be bypassed) and an external reset pin.

Add a device tree binding for its USB protocol part. The internal LDO is
not covered by this and can just be modelled as a fixed regulator.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
---
Changes in v2:
- Misc fixes suggested by Krzysztof, including property descriptions,
  single-item "items" and fixing the example's gpio property.
- Fixed $id.

 .../bindings/usb/genesys,gl850g.yaml          | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
new file mode 100644
index 000000000000..966462ca6acb
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
@@ -0,0 +1,47 @@ 
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/genesys,gl850g.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Genesys Logic GL850G USB 2.0 hub controller
+
+maintainers:
+  - Icenowy Zheng <uwu@icenowy.me>
+
+allOf:
+  - $ref: usb-device.yaml#
+
+properties:
+  compatible:
+    enum:
+      - usb5e3,608
+
+  reg: true
+
+  reset-gpios:
+    description: GPIO controlling the RESET# pin.
+
+  vdd-supply:
+    description:
+      the regulator that provides 3.3V core power to the hub.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        hub: hub@1 {
+            compatible = "usb5e3,608";
+            reg = <1>;
+            reset-gpios = <&pio 7 2>;
+        };
+    };