@@ -80,6 +80,15 @@ static void pxav2_reset(struct sdhci_host *host, u8 mask)
}
}
+static u16 pxav1_readw(struct sdhci_host *host, int reg)
+{
+ /* Workaround for data abort exception on SDH2 and SDH4 on PXA168 */
+ if (reg == SDHCI_HOST_VERSION)
+ return readl(host->ioaddr + SDHCI_HOST_VERSION - 2) >> 16;
+
+ return readw(host->ioaddr + reg);
+}
+
static void pxav2_mmc_set_bus_width(struct sdhci_host *host, int width)
{
u8 ctrl;
@@ -102,6 +111,7 @@ static void pxav2_mmc_set_bus_width(struct sdhci_host *host, int width)
}
static const struct sdhci_ops pxav1_sdhci_ops = {
+ .read_w = pxav1_readw,
.set_clock = sdhci_set_clock,
.get_max_clock = sdhci_pltfm_clk_get_max_clock,
.set_bus_width = pxav2_mmc_set_bus_width,
The PXA168 has a documented silicon bug that results in a data abort exception when accessing the SDHCI_HOST_VERSION register on SDH2 and SDH4 through a 16-bit read. Implement the workaround described in the errata, which performs a 32-bit read from a lower address instead. This is safe to use on all four SDH peripherals. Signed-off-by: Doug Brown <doug@schmorgal.com> --- drivers/mmc/host/sdhci-pxav2.c | 10 ++++++++++ 1 file changed, 10 insertions(+)