diff mbox series

[v3,1/4] hwmon: (pmbus/core): Add status byte to regulator flag map

Message ID 20221130165955.3479143-1-Naresh.Solanki@9elements.com
State Superseded
Headers show
Series [v3,1/4] hwmon: (pmbus/core): Add status byte to regulator flag map | expand

Commit Message

Naresh Solanki Nov. 30, 2022, 4:59 p.m. UTC
Add PMBus status byte to regulator flag map.

Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>

---
Changes:
- Remove status input
- Add comment for PMBUS status byte.
---
 drivers/hwmon/pmbus/pmbus_core.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)


base-commit: 9494c53e1389b120ba461899207ac8a3aab2632c
diff mbox series

Patch

diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 95e95783972a..a7b4ae0f1f3b 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -2751,7 +2751,16 @@  struct pmbus_regulator_status_category {
 };
 
 static const struct pmbus_regulator_status_category pmbus_regulator_flag_map[] = {
-	{
+	{	/* STATUS byte is always present. */
+		.func = -1,
+		.reg = PMBUS_STATUS_BYTE,
+		.bits = (const struct pmbus_regulator_status_assoc[]) {
+			{ PB_STATUS_IOUT_OC,   REGULATOR_ERROR_OVER_CURRENT },
+			{ PB_STATUS_VOUT_OV,   REGULATOR_ERROR_REGULATION_OUT },
+			{ PB_STATUS_VIN_UV,    REGULATOR_ERROR_UNDER_VOLTAGE },
+			{ },
+		},
+	}, {
 		.func = PMBUS_HAVE_STATUS_VOUT,
 		.reg = PMBUS_STATUS_VOUT,
 		.bits = (const struct pmbus_regulator_status_assoc[]) {
@@ -2768,6 +2777,7 @@  static const struct pmbus_regulator_status_category pmbus_regulator_flag_map[] =
 			{ PB_IOUT_OC_WARNING,    REGULATOR_ERROR_OVER_CURRENT_WARN },
 			{ PB_IOUT_OC_FAULT,      REGULATOR_ERROR_OVER_CURRENT },
 			{ PB_IOUT_OC_LV_FAULT,   REGULATOR_ERROR_OVER_CURRENT },
+			{ PB_POUT_OP_FAULT,      REGULATOR_ERROR_FAIL },
 			{ },
 		},
 	}, {
@@ -2834,14 +2844,6 @@  static int pmbus_regulator_get_error_flags(struct regulator_dev *rdev, unsigned
 		if (status & PB_STATUS_POWER_GOOD_N)
 			*flags |= REGULATOR_ERROR_REGULATION_OUT;
 	}
-	/*
-	 * Unlike most other status bits, PB_STATUS_{IOUT_OC,VOUT_OV} are
-	 * defined strictly as fault indicators (not warnings).
-	 */
-	if (status & PB_STATUS_IOUT_OC)
-		*flags |= REGULATOR_ERROR_OVER_CURRENT;
-	if (status & PB_STATUS_VOUT_OV)
-		*flags |= REGULATOR_ERROR_REGULATION_OUT;
 
 	/*
 	 * If we haven't discovered any thermal faults or warnings via