From patchwork Thu Nov 17 10:36:56 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andre Przywara X-Patchwork-Id: 626435 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 95569C4332F for ; Thu, 17 Nov 2022 10:37:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S239485AbiKQKhl (ORCPT ); Thu, 17 Nov 2022 05:37:41 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34308 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S239620AbiKQKhc (ORCPT ); Thu, 17 Nov 2022 05:37:32 -0500 Received: from foss.arm.com (foss.arm.com [217.140.110.172]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 8BB31532F7; Thu, 17 Nov 2022 02:37:24 -0800 (PST) Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id 4A59C150C; Thu, 17 Nov 2022 02:37:30 -0800 (PST) Received: from donnerap.arm.com (donnerap.cambridge.arm.com [10.1.197.42]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id 360613F73B; Thu, 17 Nov 2022 02:37:22 -0800 (PST) From: Andre Przywara To: Chen-Yu Tsai , Samuel Holland , Jernej Skrabec , Rob Herring , Krzysztof Kozlowski , Bin Liu Cc: Icenowy Zheng , Greg Kroah-Hartman , devicetree@vger.kernel.org, soc@kernel.org, linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev Subject: [PATCH v4 11/11] ARM: dts: suniv: Add Lctech Pi F1C200s devicetree Date: Thu, 17 Nov 2022 10:36:56 +0000 Message-Id: <20221117103656.1085840-12-andre.przywara@arm.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221117103656.1085840-1-andre.przywara@arm.com> References: <20221117103656.1085840-1-andre.przywara@arm.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The Lctech Pi F1C200s (also previously known under the Cherry Pi brand) is a small development board with the Allwinner F1C200s SoC. This is the same as the F1C100s, but with 64MB instead of 32MB co-packaged DRAM. Alongside the obligatory micro-SD card slot, the board features a SPI-NAND flash chip, LCD and touch connectors, and unpopulated expansion header pins. There are two USB Type-C ports on the board: One supplies the power, also connects to the USB MUSB OTG controller port. The other one is connected to an CH340 USB serial chip, which in turn is connected to UART1. Add a devicetree file, so that the board can be used easily. Signed-off-by: Andre Przywara Acked-by: Jernej Skrabec --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/suniv-f1c100s.dtsi | 6 ++ arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts | 76 +++++++++++++++++++ 3 files changed, 83 insertions(+) create mode 100644 arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0249c07bd8a6b..52f8ab0eacb29 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1392,6 +1392,7 @@ dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-cubieboard4.dtb dtb-$(CONFIG_MACH_SUNIV) += \ suniv-f1c100s-licheepi-nano.dtb \ + suniv-f1c200s-lctech-pi.dtb \ suniv-f1c200s-popstick-v1.1.dtb dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \ tegra20-acer-a500-picasso.dtb \ diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index 111f8bbc2a805..3c61d59ab5f86 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -207,6 +207,12 @@ uart0_pe_pins: uart0-pe-pins { pins = "PE0", "PE1"; function = "uart0"; }; + + /omit-if-no-ref/ + uart1_pa_pins: uart1-pa-pins { + pins = "PA2", "PA3"; + function = "uart1"; + }; }; i2c0: i2c@1c27000 { diff --git a/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts new file mode 100644 index 0000000000000..2d2a3f026df33 --- /dev/null +++ b/arch/arm/boot/dts/suniv-f1c200s-lctech-pi.dts @@ -0,0 +1,76 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2022 Arm Ltd, + * based on work: + * Copyright 2022 Icenowy Zheng + */ + +/dts-v1/; +#include "suniv-f1c100s.dtsi" + +#include + +/ { + model = "Lctech Pi F1C200s"; + compatible = "lctech,pi-f1c200s", "allwinner,suniv-f1c200s", + "allwinner,suniv-f1c100s"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&mmc0 { + broken-cd; + bus-width = <4>; + disable-wp; + vmmc-supply = <®_vcc3v3>; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pc_pins>; + status = "okay"; + + flash@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <40000000>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pa_pins>; + status = "okay"; +}; + +/* + * This is a Type-C socket, but CC1/2 are not connected, and VBUS is connected + * to Vin, which supplies the board. Host mode works (if the board is powered + * otherwise), but peripheral is probably the intention. + */ +&usb_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +};