diff mbox series

[v2,06/11] dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range

Message ID 20221025191515.9151-7-bb@ti.com
State Accepted
Commit c4026d3e2578291016703cd75f3a6f786f60cd80
Headers show
Series enable VTM node for all TI's K3 SoCs | expand

Commit Message

Bryan Brattlof Oct. 25, 2022, 7:15 p.m. UTC
Only some of TI's J721E SoCs will need a eFuse register range mapped to
determine if they're affected by TI's i2128 erratum. All other SoC will
not need this eFuse range to function properly

Update the bindings for the k3_j72xx_bandgap thermal driver so other
devices will only need two register ranges

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 .../bindings/thermal/ti,j72xx-thermal.yaml       | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
index 3bb870a26872f..0509c9cec224d 100644
--- a/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/ti,j72xx-thermal.yaml
@@ -37,6 +37,7 @@  properties:
           devices to function properly. This eFuse region provides
           the information needed for these SoCs to report
           temperatures accurately.
+    minItems: 2
 
   power-domains:
     maxItems: 1
@@ -44,6 +45,21 @@  properties:
   "#thermal-sensor-cells":
     const: 1
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-vtm
+    then:
+      properties:
+        reg:
+          minItems: 3
+    else:
+      properties:
+        reg:
+          maxItems: 2
+
 required:
   - compatible
   - reg