diff mbox series

[v2,4/4] arm64: dts: smaug: Add display panel node

Message ID 20221025153746.101278-5-diogo.ivo@tecnico.ulisboa.pt
State New
Headers show
Series Add JDI LPM102A188A display panel support | expand

Commit Message

Diogo Ivo Oct. 25, 2022, 3:37 p.m. UTC
The Google Pixel C has a JDI LPM102A188A display panel. Add a
DT node for it. Tested on Pixel C.

Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
---
Changes in v2:
 - renamed backlight node to a generic name
 - removed underscores

 arch/arm64/boot/dts/nvidia/tegra210-smaug.dts | 70 +++++++++++++++++++
 1 file changed, 70 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
index 84ec4d8b7f10..5db0b25c8d58 100644
--- a/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra210-smaug.dts
@@ -31,6 +31,37 @@  memory {
 	};
 
 	host1x@50000000 {
+		dc@54200000 {
+			status = "okay";
+		};
+
+		dsia: dsi@54300000 {
+			avdd-dsi-csi-supply = <&vdd_dsi_csi>;
+			status = "okay";
+
+			link2: panel@0 {
+				compatible = "jdi,lpm102a188a";
+				reg = <0>;
+			};
+		};
+
+		dsib: dsi@54400000 {
+			avdd-dsi-csi-supply = <&vdd_dsi_csi>;
+			nvidia,ganged-mode = <&dsia>;
+			status = "okay";
+
+			link1: panel@0 {
+				compatible = "jdi,lpm102a188a";
+				reg = <0>;
+				power-supply = <&pplcd_vdd>;
+				ddi-supply = <&pp1800_lcdio>;
+				enable-gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+				reset-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+				link2 = <&link2>;
+				backlight = <&backlight>;
+			};
+		};
+
 		dpaux: dpaux@545c0000 {
 			status = "okay";
 		};
@@ -1627,6 +1658,37 @@  nau8825@1a {
 			status = "okay";
 		};
 
+		backlight: backlight@2c {
+			compatible = "ti,lp8557";
+			reg = <0x2c>;
+			power-supply = <&pplcd_vdd>;
+			enable-supply = <&pp1800_lcdio>;
+			bl-name = "lp8557-backlight";
+			dev-ctrl = /bits/ 8 <0x01>;
+			init-brt = /bits/ 8 <0x80>;
+
+			/* Full scale current, 20mA */
+			rom-11h {
+				rom-addr = /bits/ 8 <0x11>;
+				rom-val = /bits/ 8 <0x05>;
+			};
+			/* Frequency = 4.9kHz, magic undocumented val */
+			rom-12h {
+				rom-addr = /bits/ 8 <0x12>;
+				rom-val = /bits/ 8 <0x29>;
+			};
+			/* Boost freq = 1MHz, BComp option = 1 */
+			rom-13h {
+				rom-addr = /bits/ 8 <0x13>;
+				rom-val = /bits/ 8 <0x03>;
+			};
+			/* 4V OV, 6 output LED string enabled */
+			rom-14h {
+				rom-addr = /bits/ 8 <0x14>;
+				rom-val = /bits/ 8 <0xbf>;
+			};
+		};
+
 		audio-codec@2d {
 			compatible = "realtek,rt5677";
 			reg = <0x2d>;
@@ -1908,4 +1970,12 @@  usbc_vbus: regulator-usbc-vbus {
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 	};
+
+	vdd_dsi_csi: regulator-vdd-dsi-csi {
+		compatible = "regulator-fixed";
+		regulator-name = "AVDD_DSI_CSI_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&pp1200_avdd>;
+	};
 };