diff mbox series

[RFC,v5,2/5] dt-bindings: net: can: add STM32 bxcan DT bindings

Message ID 20221017164231.4192699-3-dario.binacchi@amarulasolutions.com
State Superseded
Headers show
Series can: bxcan: add support for ST bxCAN controller | expand

Commit Message

Dario Binacchi Oct. 17, 2022, 4:42 p.m. UTC 
Add documentation of device tree bindings for the STM32 basic extended
CAN (bxcan) controller.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>

---

Changes in v5:
- Add Rob Herring's Reviewed-by tag.

Changes in v4:
- Remove "st,stm32f4-bxcan-core" compatible. In this way the can nodes
 (compatible "st,stm32f4-bxcan") are no longer children of a parent
  node with compatible "st,stm32f4-bxcan-core".
- Add the "st,gcan" property (global can memory) to can nodes which
  references a "syscon" node containing the shared clock and memory
  addresses.

Changes in v3:
- Remove 'Dario Binacchi <dariobin@libero.it>' SOB.
- Add description to the parent of the two child nodes.
- Move "patterProperties:" after "properties: in top level before "required".
- Add "clocks" to the "required:" list of the child nodes.

Changes in v2:
- Change the file name into 'st,stm32-bxcan-core.yaml'.
- Rename compatibles:
  - st,stm32-bxcan-core -> st,stm32f4-bxcan-core
  - st,stm32-bxcan -> st,stm32f4-bxcan
- Rename master property to st,can-master.
- Remove the status property from the example.
- Put the node child properties as required.

 .../bindings/net/can/st,stm32-bxcan.yaml      | 83 +++++++++++++++++++
 1 file changed, 83 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
new file mode 100644
index 000000000000..c9194345d202
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
@@ -0,0 +1,83 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/can/st,stm32-bxcan.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics bxCAN controller
+
+description: STMicroelectronics BxCAN controller for CAN bus
+
+maintainers:
+  - Dario Binacchi <dario.binacchi@amarulasolutions.com>
+
+allOf:
+  - $ref: can-controller.yaml#
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-bxcan
+
+  st,can-master:
+    description:
+      Master and slave mode of the bxCAN peripheral is only relevant
+      if the chip has two CAN peripherals. In that case they share
+      some of the required logic.
+    type: boolean
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: transmit interrupt
+      - description: FIFO 0 receive interrupt
+      - description: FIFO 1 receive interrupt
+      - description: status change error interrupt
+
+  interrupt-names:
+    items:
+      - const: tx
+      - const: rx0
+      - const: rx1
+      - const: sce
+
+  resets:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  st,gcan:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    description:
+      The phandle to the gcan node which allows to access the 512-bytes
+      SRAM memory shared by the two bxCAN cells (CAN1 master and CAN2
+      slave) in dual CAN peripheral configuration.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+  - clocks
+  - st,gcan
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32fx-clock.h>
+    #include <dt-bindings/mfd/stm32f4-rcc.h>
+
+    can1: can@40006400 {
+        compatible = "st,stm32f4-bxcan";
+        reg = <0x40006400 0x200>;
+        interrupts = <19>, <20>, <21>, <22>;
+        interrupt-names = "tx", "rx0", "rx1", "sce";
+        resets = <&rcc STM32F4_APB1_RESET(CAN1)>;
+        clocks = <&rcc 0 STM32F4_APB1_CLOCK(CAN1)>;
+        st,can-master;
+        st,gcan = <&gcan>;
+    };