@@ -6,12 +6,16 @@
*/
#include <linux/dsa/ocelot.h>
#include <linux/if_bridge.h>
+#include <linux/iopoll.h>
#include <soc/mscc/ocelot_vcap.h>
#include "ocelot.h"
#include "ocelot_vcap.h"
-#define TABLE_UPDATE_SLEEP_US 10
-#define TABLE_UPDATE_TIMEOUT_US 100000
+#define TABLE_UPDATE_SLEEP_US 10
+#define TABLE_UPDATE_TIMEOUT_US 100000
+#define MEM_INIT_SLEEP_US 1000
+#define MEM_INIT_TIMEOUT_US 100000
+
#define OCELOT_RSV_VLAN_RANGE_START 4000
struct ocelot_mact_entry {
@@ -2715,6 +2719,46 @@ static void ocelot_detect_features(struct ocelot *ocelot)
ocelot->num_frame_refs = QSYS_MMGT_EQ_CTRL_FP_FREE_CNT(eq_ctrl);
}
+static int ocelot_mem_init_status(struct ocelot *ocelot)
+{
+ unsigned int val;
+ int err;
+
+ err = regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT],
+ &val);
+
+ return err ?: val;
+}
+
+int ocelot_reset(struct ocelot *ocelot)
+{
+ int err;
+ u32 val;
+
+ err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], 1);
+ if (err)
+ return err;
+
+ err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
+ if (err)
+ return err;
+
+ /* MEM_INIT is a self-clearing bit. Wait for it to be cleared (should be
+ * 100us) before enabling the switch core.
+ */
+ err = readx_poll_timeout(ocelot_mem_init_status, ocelot, val, !val,
+ MEM_INIT_SLEEP_US, MEM_INIT_TIMEOUT_US);
+ if (err)
+ return err;
+
+ err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
+ if (err)
+ return err;
+
+ return regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
+}
+EXPORT_SYMBOL(ocelot_reset);
+
int ocelot_init(struct ocelot *ocelot)
{
int i, ret;
@@ -6,7 +6,6 @@
*/
#include <linux/dsa/ocelot.h>
#include <linux/interrupt.h>
-#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/of_net.h>
#include <linux/netdevice.h>
@@ -17,6 +16,7 @@
#include <linux/skbuff.h>
#include <net/switchdev.h>
+#include <soc/mscc/ocelot.h>
#include <soc/mscc/ocelot_vcap.h>
#include <soc/mscc/ocelot_hsio.h>
#include <soc/mscc/vsc7514_regs.h>
@@ -26,9 +26,6 @@
#define VSC7514_VCAP_POLICER_BASE 128
#define VSC7514_VCAP_POLICER_MAX 191
-#define MEM_INIT_SLEEP_US 1000
-#define MEM_INIT_TIMEOUT_US 100000
-
static const u32 *ocelot_regmap[TARGET_MAX] = {
[ANA] = vsc7514_ana_regmap,
[QS] = vsc7514_qs_regmap,
@@ -133,45 +130,6 @@ static const struct of_device_id mscc_ocelot_match[] = {
};
MODULE_DEVICE_TABLE(of, mscc_ocelot_match);
-static int ocelot_mem_init_status(struct ocelot *ocelot)
-{
- unsigned int val;
- int err;
-
- err = regmap_field_read(ocelot->regfields[SYS_RESET_CFG_MEM_INIT],
- &val);
-
- return err ?: val;
-}
-
-static int ocelot_reset(struct ocelot *ocelot)
-{
- int err;
- u32 val;
-
- err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_INIT], 1);
- if (err)
- return err;
-
- err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
- if (err)
- return err;
-
- /* MEM_INIT is a self-clearing bit. Wait for it to be cleared (should be
- * 100us) before enabling the switch core.
- */
- err = readx_poll_timeout(ocelot_mem_init_status, ocelot, val, !val,
- MEM_INIT_SLEEP_US, MEM_INIT_TIMEOUT_US);
- if (err)
- return err;
-
- err = regmap_field_write(ocelot->regfields[SYS_RESET_CFG_MEM_ENA], 1);
- if (err)
- return err;
-
- return regmap_field_write(ocelot->regfields[SYS_RESET_CFG_CORE_ENA], 1);
-}
-
static const struct ocelot_ops ocelot_ops = {
.reset = ocelot_reset,
.wm_enc = ocelot_wm_enc,
@@ -1134,6 +1134,7 @@ void ocelot_ptp_rx_timestamp(struct ocelot *ocelot, struct sk_buff *skb,
int ocelot_regfields_init(struct ocelot *ocelot,
const struct reg_field *const regfields);
struct regmap *ocelot_regmap_init(struct ocelot *ocelot, struct resource *res);
+int ocelot_reset(struct ocelot *ocelot);
int ocelot_init(struct ocelot *ocelot);
void ocelot_deinit(struct ocelot *ocelot);
void ocelot_init_port(struct ocelot *ocelot, int port);
Resetting the switch core is the same whether it is done internally or externally. Move this routine to the ocelot library so it can be used by other drivers. Signed-off-by: Colin Foster <colin.foster@in-advantage.com> --- v3-v4 * No changes v2 * New patch --- drivers/net/ethernet/mscc/ocelot.c | 48 +++++++++++++++++++++- drivers/net/ethernet/mscc/ocelot_vsc7514.c | 44 +------------------- include/soc/mscc/ocelot.h | 1 + 3 files changed, 48 insertions(+), 45 deletions(-)