[06/23] ARM: dts: qcom: apq8064-flo: use labels to patch device tree

Message ID	20220930185236.867655-7-dmitry.baryshkov@linaro.org
State	Accepted
Commit	2aadb0e9835962fb1d4e0a214293b0592c5e8b70
Headers	show Return-Path: <devicetree-owner@kernel.org> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@somainline.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH 06/23] ARM: dts: qcom: apq8064-flo: use labels to patch device tree Date: Fri, 30 Sep 2022 21:52:19 +0300 Message-Id: <20220930185236.867655-7-dmitry.baryshkov@linaro.org> In-Reply-To: <20220930185236.867655-1-dmitry.baryshkov@linaro.org> References: <20220930185236.867655-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	ARM: dts: qcom: rework DT for apq8064, msm8960 and msm8660 \| expand [00/23] ARM: dts: qcom: rework DT for apq8064, msm8960 and msm8660 [01/23] ARM: dts: qcom: apq8064: disable HDMI nodes by default [02/23] ARM: dts: qcom: apq8064-ifc6410: use labels to patch device tree [03/23] ARM: dts: qcom: apq8064-ifc6410: pull ext-3p3v regulator from soc node [04/23] ARM: dts: qcom: apq8064-ifc6410: fix user1 LED node name [05/23] ARM: dts: qcom: apq8064-ifc6410: pull SDCC pwrseq node up one level [06/23] ARM: dts: qcom: apq8064-flo: use labels to patch device tree [07/23] ARM: dts: qcom: apq8064-nexus7-flo: fix node name for ext 3p3v regulator [08/23] ARM: dts: qcom: apq8064-cm-qs600: use labels to patch device tree [09/23] ARM: dts: qcom: apq8064-cm-qs600: pull 3p3v regulator from soc node [10/23] ARM: dts: qcom: apq8064-cm-qs600: pull SDCC pwrseq node up one level [11/23] ARM: dts: qcom: apq8064-sony-xperia-lagan-yuga: use labels to patch device tree [12/23] ARM: dts: qcom: apq8064: drop amba device node [13/23] ARM: dts: qcom: apq8064: drop unit ids from PMIC nodes [14/23] ARM: dts: qcom: apq8064: drop qcom, prefix from SSBI node name [15/23] ARM: dts: qcom: apq8064: fix the riva-pil node id [16/23] ARM: dts: qcom: msm8960: drop unit ids from PMIC nodes [17/23] ARM: dts: qcom: msm8960: drop qcom, prefix from SSBI node name [18/23] ARM: dts: qcom: msm8960-cdp: drop unit ids from regulator node [19/23] ARM: dts: qcom: msm8960: drop amba device node [20/23] ARM: dts: qcom: msm8660: move pm8058 LED devices to the main DT file [21/23] ARM: dts: qcom: apq8060-dragonboard: use labels to patch device tree [22/23] ARM: dts: qcom: msm8660: drop unit ids from PMIC nodes [23/23] ARM: dts: qcom: msm8660: drop qcom, prefix from SSBI node name

diff --git a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts index fee278e32cb6..2c661bc51488 100644 --- a/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts @@ -57,302 +57,291 @@ key-volume-down { }; soc { - rpm@108000 { - regulators { - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - vin_lvs1_3_6-supply = <&pm8921_s4>; - vin_lvs4_5_7-supply = <&pm8921_s4>; - - - vdd_l24-supply = <&pm8921_s1>; - vdd_l25-supply = <&pm8921_s1>; - vin_lvs2-supply = <&pm8921_s1>; - - vdd_l26-supply = <&pm8921_s7>; - vdd_l27-supply = <&pm8921_s7>; - vdd_l28-supply = <&pm8921_s7>; - - vdd_ncp-supply = <&pm8921_l6>; - - /* Buck SMPS */ - s1 { - regulator-always-on; - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - qcom,switch-mode-frequency = <3200000>; - bias-pull-down; - }; - - /* msm otg HSUSB_VDDCX */ - s3 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1150000>; - qcom,switch-mode-frequency = <4800000>; - }; - - /* - * msm_sdcc.1-sdc-vdd_io - * tabla2x-slim-CDC_VDDA_RX - * tabla2x-slim-CDC_VDDA_TX - * tabla2x-slim-CDC_VDD_CP - * tabla2x-slim-VDDIO_CDC - */ - s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - qcom,switch-mode-frequency = <3200000>; - regulator-always-on; - }; - - s7 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - qcom,switch-mode-frequency = <3200000>; - }; - - /* mipi_dsi.1-dsi1_pll_vdda */ - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - /* msm_otg-HSUSB_3p3 */ - l3 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - bias-pull-down; - }; - - /* msm_otg-HSUSB_1p8 */ - l4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - /* msm_sdcc.1-sdc_vdd */ - l5 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - regulator-always-on; - bias-pull-down; - }; - - l6 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - }; - - /* mipi_dsi.1-dsi1_avdd */ - l11 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - bias-pull-down; - regulator-always-on; - }; - - /* pwm_power for backlight */ - l17 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - /* camera, qdsp6 */ - l23 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - bias-pull-down; - }; - - /* - * tabla2x-slim-CDC_VDDA_A_1P2V - * tabla2x-slim-VDDD_CDC_D - */ - l25 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <1250000>; - bias-pull-down; - }; - - lvs1 { - bias-pull-down; - }; - - lvs4 { - bias-pull-down; - }; - - lvs5 { - bias-pull-down; - }; - - lvs6 { - bias-pull-down; - }; - /* - * mipi_dsi.1-dsi1_vddio - * pil_riva-pll_vdd - */ - lvs7 { - bias-pull-down; - }; - }; - }; + sram@2a03f000 { + compatible = "qcom,apq8064-imem", "syscon", "simple-mfd"; + reg = <0x2a03f000 0x1000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x65c>; - mdp@5100000 { - status = "okay"; - ports { - port@1 { - mdp_dsi1_out: endpoint { - remote-endpoint = <&dsi0_in>; - }; - }; + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; }; }; + }; +}; - dsi0: dsi@4700000 { - status = "okay"; - vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/ - vdd-supply = <&pm8921_l8>; - vddio-supply = <&pm8921_lvs7>; - avdd-supply = <&pm8921_l11>; - - panel@0 { - reg = <0>; - compatible = "jdi,lt070me05000"; - - vddp-supply = <&pm8921_l17>; - iovcc-supply = <&pm8921_lvs7>; - - enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; - reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; - dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; - - port { - panel_in: endpoint { - remote-endpoint = <&dsi0_out>; - }; - }; - }; - ports { - port@0 { - dsi0_in: endpoint { - remote-endpoint = <&mdp_dsi1_out>; - }; - }; - - port@1 { - dsi0_out: endpoint { - remote-endpoint = <&panel_in>; - data-lanes = <0 1 2 3>; - }; - }; +&dsi0 { + vdda-supply = <&pm8921_l2>;/*VDD_MIPI1 to 4*/ + vdd-supply = <&pm8921_l8>; + vddio-supply = <&pm8921_lvs7>; + avdd-supply = <&pm8921_l11>; + status = "okay"; + + panel@0 { + reg = <0>; + compatible = "jdi,lt070me05000"; + + vddp-supply = <&pm8921_l17>; + iovcc-supply = <&pm8921_lvs7>; + + enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; + dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; }; }; + }; +}; + +&dsi0_in { + remote-endpoint = <&mdp_dsi1_out>; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/ + status = "okay"; +}; + +&gsbi1 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi1_i2c { + status = "okay"; + clock-frequency = <200000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + pagesize = <32>; + }; + + bq27541@55 { + compatible = "ti,bq27541"; + reg = <0x55>; + }; + +}; + +&gsbi3 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi3_i2c { + clock-frequency = <200000>; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; + status = "okay"; + + trackpad@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + interrupt-parent = <&tlmm_pinmux>; + interrupts = <6 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&gsbi6 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi6_serial { + pinctrl-names = "default"; + pinctrl-0 = <&gsbi6_uart_4pins>; + status = "okay"; +}; - dsi-phy@4700200 { - status = "okay"; - vddio-supply = <&pm8921_lvs7>;/*VDD_PLL2_1 to 7*/ +&gsbi7 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi7_serial { + status = "okay"; +}; + +&mdp { + status = "okay"; +}; + +/* eMMC */ +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + vqmmc-supply = <&pm8921_s4>; + status = "okay"; +}; + +&mdp_dsi1_out { + remote-endpoint = <&dsi0_in>; +}; + +&rpm { + regulators { + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + + + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vin_lvs2-supply = <&pm8921_s1>; + + vdd_l26-supply = <&pm8921_s7>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + vdd_ncp-supply = <&pm8921_l6>; + + /* Buck SMPS */ + s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; }; - gsbi@16200000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; - i2c@16280000 { - status = "okay"; - clock-frequency = <200000>; - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; - - trackpad@10 { - compatible = "elan,ekth3500"; - reg = <0x10>; - interrupt-parent = <&tlmm_pinmux>; - interrupts = <6 IRQ_TYPE_EDGE_FALLING>; - }; - }; + /* msm otg HSUSB_VDDCX */ + s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; }; + /* + * msm_sdcc.1-sdc-vdd_io + * tabla2x-slim-CDC_VDDA_RX + * tabla2x-slim-CDC_VDDA_TX + * tabla2x-slim-CDC_VDD_CP + * tabla2x-slim-VDDIO_CDC + */ + s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <3200000>; + regulator-always-on; + }; - gsbi@12440000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C>; + s7 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <3200000>; + }; - i2c@12460000 { - status = "okay"; - clock-frequency = <200000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; + /* mipi_dsi.1-dsi1_pll_vdda */ + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; - eeprom@52 { - compatible = "atmel,24c128"; - reg = <0x52>; - pagesize = <32>; - }; + /* msm_otg-HSUSB_3p3 */ + l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + bias-pull-down; + }; - bq27541@55 { - compatible = "ti,bq27541"; - reg = <0x55>; - }; + /* msm_otg-HSUSB_1p8 */ + l4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; - }; + /* msm_sdcc.1-sdc_vdd */ + l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-always-on; + bias-pull-down; }; - gsbi@16500000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; + l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; - serial@16540000 { - status = "okay"; + /* mipi_dsi.1-dsi1_avdd */ + l11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + regulator-always-on; + }; - pinctrl-names = "default"; - pinctrl-0 = <&gsbi6_uart_4pins>; - }; + /* pwm_power for backlight */ + l17 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; }; - gsbi@16600000 { - status = "okay"; - qcom,mode = <GSBI_PROT_I2C_UART>; - serial@16640000 { - status = "okay"; - }; + /* camera, qdsp6 */ + l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; }; - /* OTG */ - usb@12500000 { - status = "okay"; - dr_mode = "otg"; - ulpi { - phy { - v3p3-supply = <&pm8921_l3>; - v1p8-supply = <&pm8921_l4>; - }; - }; + /* + * tabla2x-slim-CDC_VDDA_A_1P2V + * tabla2x-slim-VDDD_CDC_D + */ + l25 { + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + bias-pull-down; }; - amba { - /* eMMC */ - mmc@12400000 { - status = "okay"; - vmmc-supply = <&pm8921_l5>; - vqmmc-supply = <&pm8921_s4>; - }; + lvs1 { + bias-pull-down; }; - sram@2a03f000 { - compatible = "qcom,apq8064-imem", "syscon", "simple-mfd"; - reg = <0x2a03f000 0x1000>; + lvs4 { + bias-pull-down; + }; - reboot-mode { - compatible = "syscon-reboot-mode"; - offset = <0x65c>; + lvs5 { + bias-pull-down; + }; - mode-normal = <0x77665501>; - mode-bootloader = <0x77665500>; - mode-recovery = <0x77665502>; - }; + lvs6 { + bias-pull-down; + }; + /* + * mipi_dsi.1-dsi1_vddio + * pil_riva-pll_vdd + */ + lvs7 { + bias-pull-down; }; }; }; + +&usb_hs1_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; +}; + +/* OTG */ +&usb1 { + dr_mode = "otg"; + status = "okay"; +};

[06/23] ARM: dts: qcom: apq8064-flo: use labels to patch device tree

Commit Message

Patch