diff mbox series

[v2,20/40] dt-bindings: pinctrl: qcom,sm8450-pinctrl: fix indentation in example

Message ID 20220912061746.6311-21-krzysztof.kozlowski@linaro.org
State Accepted
Commit fde270ebb7eddf5aeae3e6235afdc92390d4d8f0
Headers show
Series pinctrl/arm64: qcom: fix some of Qualcomm pinctrl schema warnings | expand

Commit Message

Krzysztof Kozlowski Sept. 12, 2022, 6:17 a.m. UTC 
Bindings example should be indented with 4-spaces.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/pinctrl/qcom,sm8450-pinctrl.yaml | 58 +++++++++----------
 1 file changed, 29 insertions(+), 29 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
index d1d1c1455b3c..87347e9c5f1c 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-pinctrl.yaml
@@ -111,34 +111,34 @@  $defs:
 
 examples:
   - |
-        #include <dt-bindings/interrupt-controller/arm-gic.h>
-        pinctrl@f100000 {
-                compatible = "qcom,sm8450-tlmm";
-                reg = <0x0f100000 0x300000>;
-                gpio-controller;
-                #gpio-cells = <2>;
-                gpio-ranges = <&tlmm 0 0 211>;
-                interrupt-controller;
-                #interrupt-cells = <2>;
-                interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-
-                gpio-wo-subnode-state {
-                        pins = "gpio1";
-                        function = "gpio";
-                };
-
-                uart-w-subnodes-state {
-                    rx-pins {
-                            pins = "gpio26";
-                            function = "qup7";
-                            bias-pull-up;
-                    };
-
-                    tx-pins {
-                            pins = "gpio27";
-                            function = "qup7";
-                            bias-disable;
-                    };
-               };
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pinctrl@f100000 {
+        compatible = "qcom,sm8450-tlmm";
+        reg = <0x0f100000 0x300000>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&tlmm 0 0 211>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
         };
+
+        uart-w-state {
+            rx-pins {
+                pins = "gpio26";
+                function = "qup7";
+                bias-pull-up;
+            };
+
+            tx-pins {
+                pins = "gpio27";
+                function = "qup7";
+                bias-disable;
+            };
+        };
+    };
 ...