From patchwork Tue Jul 26 12:24:06 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?b?QXLEsW7DpyDDnE5BTA==?= X-Patchwork-Id: 593595 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D30BFC43334 for ; Tue, 26 Jul 2022 12:25:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232911AbiGZMZr (ORCPT ); Tue, 26 Jul 2022 08:25:47 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34036 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232771AbiGZMZp (ORCPT ); Tue, 26 Jul 2022 08:25:45 -0400 Received: from sender4-op-o14.zoho.com (sender4-op-o14.zoho.com [136.143.188.14]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E44A2186C0; Tue, 26 Jul 2022 05:25:42 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1658838286; cv=none; d=zohomail.com; s=zohoarc; b=SI8erzqmWifB8RmSt98sZ8JJg31CV+c0xbc9NwehMHBswmwgfI8muFyZubfsLw4gGtIfFlkux/ErP3oMTf2Arxa5dbV9ruE7IAgvbMg8KvBjyC4E5SBoTYAvz47VaWBtHh3faQ3M13ibj4DDbthh/+MuljmMcv6RWpaQA2V6/Nw= ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=zohomail.com; s=zohoarc; t=1658838286; h=Content-Type:Content-Transfer-Encoding:Cc:Date:From:MIME-Version:Message-ID:Subject:To; bh=4vD8StGxrYuVW8dpV+apjQ5LVL8U8Xz4DQgwitZkxTo=; b=mphxZP9Pc85BFFqhNDrPcSYJatlSEfP61LHxgAUO+8wuCjBECg4KhDMiIhjwCTY8zXXZ4Vjq7/HJTss8CngjZd8AP3Z5u+qVW8CSOEzwwCU1cVnp0Fl/xWvjHLYPdl6B6lYE0sablTBjCryrtIllsUksZodeTCZAvKzpqRDT0mM= ARC-Authentication-Results: i=1; mx.zohomail.com; dkim=pass header.i=arinc9.com; spf=pass smtp.mailfrom=arinc.unal@arinc9.com; dmarc=pass header.from= DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; t=1658838286; s=zmail; d=arinc9.com; i=arinc.unal@arinc9.com; h=From:From:To:To:Cc:Cc:Subject:Subject:Date:Date:Message-Id:Message-Id:MIME-Version:Content-Type:Content-Transfer-Encoding:Reply-To; bh=4vD8StGxrYuVW8dpV+apjQ5LVL8U8Xz4DQgwitZkxTo=; b=Wy7FGCIGkUVsb41y6Ch3LrpBKjXhN3JkzdE2v4MUkFHINjp/tg9zr92wOtRiYXYV YBPiFC/NKVgJrK1boniONuJmfpYUzLk65zh+L9Ui1+9IuwpueDVZVhwxMTudywgQm9G 3Je7RDBi9OKDn6jg5WmZoCz+Nh0IbuomTIblipMA= Received: from arinc9-PC.lan (37.120.152.236 [37.120.152.236]) by mx.zohomail.com with SMTPS id 16588382832761012.2008693998877; Tue, 26 Jul 2022 05:24:43 -0700 (PDT) From: =?utf-8?b?QXLEsW7DpyDDnE5BTA==?= To: Andrew Lunn , Vivien Didelot , Florian Fainelli , Vladimir Oltean , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Rob Herring , Krzysztof Kozlowski , Matthias Brugger , Sean Wang , Landen Chao , DENG Qingfang , Frank Wunderlich , Luiz Angelo Daros de Luca , Sander Vanheule , =?utf-8?q?Ren=C3=A9_van_Dorst?= , Daniel Golle , erkin.bozoglu@xeront.com, Sergio Paracuellos Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-mediatek@lists.infradead.org, linux-kernel@vger.kernel.org, =?utf-8?b?QXLEsW7DpyDDnE5BTA==?= Subject: [RFC PATCH net-next] dt-bindings: net: dsa: mediatek,mt7530: completely rework binding Date: Tue, 26 Jul 2022 15:24:06 +0300 Message-Id: <20220726122406.31043-1-arinc.unal@arinc9.com> X-Mailer: git-send-email 2.34.1 MIME-Version: 1.0 X-ZohoMailClient: External Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Completely rework the binding for MediaTek MT7530 and MT7531 switches. - Update title to include MT7531 switch. - Add me as a maintainer. List maintainers in alphabetical order by first name. - Update binding description. Describe the switches, which SoCs they are on, or if they are standalone. - Add description to compatible strings. - Fix MCM description. mediatek,mcm is not used on MT7623NI. - Remove phy-mode = “rgmii-txid” from description. Same code path is followed for delayed rgmii and rgmii phy-mode on mtk_eth_soc.c. - Define acceptable phy-mode values for certain compatible strings and dsa port regs. - Remove requiring reg since the referred dsa-port.yaml already does that. - Remove quotes from $ref: "dsa.yaml#". - Require mediatek,mcm for MT7621 as the compatible string is only used for MT7530 which is a part of the multi-chip module. - Add description for reset-gpios. - Only allow port 6 to be the cpu port for MT7530 as port 5 is not supported yet. Examples: - Add examples which include all different configurations. - Make example comments YAML comment instead of DT binding comment. - Define examples from platform to make the bindings clearer. - Add interrupt controller to the examples. Include header file for interrupt. - Change reset line for MT7621 examples. - Pretty formatting for the examples. - Change switch reg to 0. - Change port labels to fit the example, change some lan labels to wan. Make port 4, wan. - Change ethernet-ports to ports. Signed-off-by: Arınç ÜNAL --- I’m new to json schema so I experimented a lot with this binding. Open to suggestions! I've checked the bindings with "make dt_binding_check DT_SCHEMA_FILES=mediatek,mt7530.yaml". If anyone knows the GIC bit for interrupt for multi-chip module MT7530 in MT7623AI SoC, let me know. I’ll add it to the examples. PHY0/4 muxing on MT7623AI may be possible. Has anyone got a Unielec U7623 or another MT7623AI board to test? We require the interrupt-parent right? interrupts property shouldn't make sense without the parent defined, such as GIC or GPIO. I have it missing on a devicetree, I want to add it. trgmii speed is 1200 Mbps. Are we supposed to use 2500 speed for fixed-link trgmii? To Frank: Let me know if MII bindings for port 5 and 6 on MT7531 are okay. Does your recent patch for MT7531 make it possible to set any port for CPU, including user ports? For now, I put a rule to restrict CPU ports to 5 and 6, as described on the description of dsa port reg property. I suppose your patch does not bring support for using MT7530's port 5 as CPU port. We could try this on a BPI-R2. Device schematics show that MT7530's GMII pins are wired to GMAC1 of MT7623NI to work as RGMII. Arınç --- .../bindings/net/dsa/mediatek,mt7530.yaml | 959 +++++++++++++----- 1 file changed, 717 insertions(+), 242 deletions(-) diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml index 17ab6c69ecc7..d448090981a6 100644 --- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml +++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml @@ -4,60 +4,63 @@ $id: http://devicetree.org/schemas/net/dsa/mediatek,mt7530.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Mediatek MT7530 Ethernet switch +title: Mediatek MT7530 and MT7531 Ethernet Switches maintainers: - - Sean Wang + - Arınç ÜNAL - Landen Chao - DENG Qingfang + - Sean Wang description: | - Port 5 of mt7530 and mt7621 switch is muxed between: - 1. GMAC5: GMAC5 can interface with another external MAC or PHY. - 2. PHY of port 0 or port 4: PHY interfaces with an external MAC like 2nd GMAC - of the SOC. Used in many setups where port 0/4 becomes the WAN port. - Note: On a MT7621 SOC with integrated switch: 2nd GMAC can only connected to - GMAC5 when the gpios for RGMII2 (GPIO 22-33) are not used and not - connected to external component! - - Port 5 modes/configurations: - 1. Port 5 is disabled and isolated: An external phy can interface to the 2nd - GMAC of the SOC. - In the case of a build-in MT7530 switch, port 5 shares the RGMII bus with 2nd - GMAC and an optional external phy. Mind the GPIO/pinctl settings of the SOC! - 2. Port 5 is muxed to PHY of port 0/4: Port 0/4 interfaces with 2nd GMAC. - It is a simple MAC to PHY interface, port 5 needs to be setup for xMII mode - and RGMII delay. - 3. Port 5 is muxed to GMAC5 and can interface to an external phy. - Port 5 becomes an extra switch port. - Only works on platform where external phy TX<->RX lines are swapped. - Like in the Ubiquiti ER-X-SFP. - 4. Port 5 is muxed to GMAC5 and interfaces with the 2nd GAMC as 2nd CPU port. - Currently a 2nd CPU port is not supported by DSA code. - - Depending on how the external PHY is wired: - 1. normal: The PHY can only connect to 2nd GMAC but not to the switch - 2. swapped: RGMII TX, RX are swapped; external phy interface with the switch as - a ethernet port. But can't interface to the 2nd GMAC. - - Based on the DT the port 5 mode is configured. - - Driver tries to lookup the phy-handle of the 2nd GMAC of the master device. - When phy-handle matches PHY of port 0 or 4 then port 5 set-up as mode 2. - phy-mode must be set, see also example 2 below! - * mt7621: phy-mode = "rgmii-txid"; - * mt7623: phy-mode = "rgmii"; - - CPU-Ports need a phy-mode property: - Allowed values on mt7530 and mt7621: - - "rgmii" - - "trgmii" - On mt7531: - - "1000base-x" - - "2500base-x" - - "rgmii" - - "sgmii" + There are two versions of MT7530. MT7621AT, MT7621DAT, MT7621ST and MT7623AI + SoCs include MT7530 which is a part of the multi-chip module. + The other version of MT7530 comes as a standalone chip. + There is only one version of MT7531 which comes as a standalone chip. + + Port 5 on MT7530 has got various ways of configuration. + + For standalone MT7530: + + - Port 5 can be used as a DSA master. + This is currently not supported on the driver. + + - PHY 0 or 4 of the switch can be muxed to connect to the gmac of the SoC + which port 5 is wired to. Usually used for connecting the wan port + directly to the CPU to achieve 2 Gbps routing in total. + + The driver requires the gmac of the SoC to have "mediatek,eth-mac" as the + compatible string and the reg must be 1. So, for now, only gmac1 of an + MediaTek SoC can benefit this. Banana Pi BPI-R2 for example. + Check out example 5 for a similar configuration. + + - Port 5 can be wired to an external phy. Port 5 becomes a DSA slave. + Check out example 7 for a similar configuration. + + For multi-chip module MT7530: + + - Port 5 can be used as a DSA master. + This is currently not supported on the driver. + + - PHY 0 or 4 of the switch can be muxed to connect to gmac1 of the SoC. + Usually used for connecting the wan port directly to the CPU to achieve 2 + Gbps routing in total. + + For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function. + Check out example 5. + + - In case of an external phy wired to gmac1 of the SoC, port 5 must not be + enabled. + + For the MT7621 SoCs, rgmii2 group must be claimed with rgmii2 function. + Check out example 6. + - Port 5 can be muxed to an external phy. Port 5 becomes a DSA slave. + The external phy must be wired TX to TX to gmac1 of the SoC for this to + work. Ubiquiti EdgeRouter X SFP for example. + + For the MT7621 SoCs, rgmii2 group must be claimed with gpio function. + Check out example 7. properties: compatible: @@ -66,6 +69,14 @@ properties: - mediatek,mt7531 - mediatek,mt7621 + description: | + mediatek,mt7530: + For standalone MT7530 and multi-chip module MT7530 in MT7623AI SoC. + mediatek,mt7531: + For standalone MT7531. + mediatek,mt7621: + For multi-chip module MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs. + reg: maxItems: 1 @@ -79,7 +90,7 @@ properties: gpio-controller: type: boolean description: - if defined, MT7530's LED controller will run on GPIO mode. + If defined, MT7530's LED controller will run on GPIO mode. "#interrupt-cells": const: 1 @@ -98,11 +109,14 @@ properties: mediatek,mcm: type: boolean description: - if defined, indicates that either MT7530 is the part on multi-chip - module belong to MT7623A has or the remotely standalone chip as the - function MT7623N reference board provided for. + Used for MT7621AT, MT7621DAT, MT7621ST and MT7623AI SoCs which the MT7530 + switch is a part of the multi-chip module. reset-gpios: + description: + GPIO to reset the switch. Use this if mediatek,mcm is not used. + This is optional since some boards share the reset line with other + components which makes it impossible to probe the switch. maxItems: 1 reset-names: @@ -114,41 +128,12 @@ properties: the ethsys. maxItems: 1 -patternProperties: - "^(ethernet-)?ports$": - type: object - - patternProperties: - "^(ethernet-)?port@[0-9]+$": - type: object - description: Ethernet switch ports - - unevaluatedProperties: false - - properties: - reg: - description: - Port address described must be 5 or 6 for CPU port and from 0 - to 5 for user ports. - - allOf: - - $ref: dsa-port.yaml# - - if: - properties: - label: - items: - - const: cpu - then: - required: - - reg - - phy-mode - required: - compatible - reg allOf: - - $ref: "dsa.yaml#" + - $ref: dsa.yaml# - if: required: - mediatek,mcm @@ -166,151 +151,531 @@ allOf: items: - const: mediatek,mt7530 then: + patternProperties: + "^(ethernet-)?ports$": + type: object + + patternProperties: + "^(ethernet-)?port@[0-9]+$": + type: object + description: Ethernet switch ports + + unevaluatedProperties: false + + properties: + reg: + description: + Port address described must be 6 for CPU port and from 0 to + 5 for user ports. + + allOf: + - $ref: dsa-port.yaml# + - if: + properties: + label: + items: + - const: cpu + then: + properties: + phy-mode: + enum: + - rgmii + - trgmii + + reg: + enum: + - 6 + + required: + - phy-mode + required: - core-supply - io-supply + - if: + properties: + compatible: + items: + - const: mediatek,mt7531 + then: + patternProperties: + "^(ethernet-)?ports$": + type: object + + patternProperties: + "^(ethernet-)?port@[0-9]+$": + type: object + description: Ethernet switch ports + + unevaluatedProperties: false + + properties: + reg: + description: + Port address described must be 5 or 6 for CPU port and from + 0 to 5 for user ports. + + allOf: + - $ref: dsa-port.yaml# + - if: + properties: + label: + items: + - const: cpu + then: + allOf: + - if: + properties: + reg: + const: 5 + then: + properties: + phy-mode: + enum: + - 1000base-x + - 2500base-x + - rgmii + - sgmii + + - if: + properties: + reg: + const: 6 + then: + properties: + phy-mode: + enum: + - 1000base-x + - 2500base-x + - sgmii + + properties: + reg: + enum: + - 5 + - 6 + + required: + - phy-mode + + - if: + properties: + compatible: + items: + - const: mediatek,mt7621 + then: + patternProperties: + "^(ethernet-)?ports$": + type: object + + patternProperties: + "^(ethernet-)?port@[0-9]+$": + type: object + description: Ethernet switch ports + + unevaluatedProperties: false + + properties: + reg: + description: + Port address described must be 6 for CPU port and from 0 to + 5 for user ports. + + allOf: + - $ref: dsa-port.yaml# + - if: + properties: + label: + items: + - const: cpu + then: + properties: + phy-mode: + enum: + - rgmii + - trgmii + + reg: + enum: + - 6 + + required: + - phy-mode + + required: + - mediatek,mcm + unevaluatedProperties: false examples: + # Example 1: Standalone MT7530 - | #include - mdio { - #address-cells = <1>; - #size-cells = <0>; - switch@0 { - compatible = "mediatek,mt7530"; - reg = <0>; - - core-supply = <&mt6323_vpa_reg>; - io-supply = <&mt6323_vemc3v3_reg>; - reset-gpios = <&pio 33 GPIO_ACTIVE_HIGH>; - - ethernet-ports { + + platform { + ethernet { + mdio { #address-cells = <1>; #size-cells = <0>; - port@0 { + + switch@0 { + compatible = "mediatek,mt7530"; reg = <0>; - label = "lan0"; - }; - port@1 { - reg = <1>; - label = "lan1"; - }; + reset-gpios = <&pio 33 0>; - port@2 { - reg = <2>; - label = "lan2"; - }; + core-supply = <&mt6323_vpa_reg>; + io-supply = <&mt6323_vemc3v3_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; - port@3 { - reg = <3>; - label = "lan3"; + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; }; + }; + }; + }; - port@4 { - reg = <4>; - label = "wan"; + # Example 2: MT7530 in MT7623AI SoC + - | + #include + + platform { + ethernet { + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "mediatek,mt7530"; + reg = <0>; + + mediatek,mcm; + resets = <ðsys MT2701_ETHSYS_MCM_RST>; + reset-names = "mcm"; + + core-supply = <&mt6323_vpa_reg>; + io-supply = <&mt6323_vemc3v3_reg>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; }; + }; + }; + }; + + # Example 3: Standalone MT7531 + - | + #include + #include + + platform { + ethernet { + mdio { + #address-cells = <1>; + #size-cells = <0>; - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "trgmii"; - fixed-link { - speed = <1000>; - full-duplex; + switch@0 { + compatible = "mediatek,mt7531"; + reg = <0>; + + reset-gpios = <&pio 54 0>; + + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "2500base-x"; + + fixed-link { + speed = <2500>; + full-duplex; + pause; + }; + }; }; }; }; }; }; + # Example 4: MT7530 in MT7621AT, MT7621DAT and MT7621ST SoCs - | - //Example 2: MT7621: Port 4 is WAN port: 2nd GMAC -> Port 5 -> PHY port 4. - - ethernet { - #address-cells = <1>; - #size-cells = <0>; - gmac0: mac@0 { - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - pause; + #include + #include + + platform { + ethernet { + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "mediatek,mt7621"; + reg = <0>; + + mediatek,mcm; + resets = <&sysc MT7621_RST_MCM>; + reset-names = "mcm"; + + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + }; }; }; + }; - gmac1: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - phy-mode = "rgmii-txid"; - phy-handle = <&phy4>; + # Example 5: MT7621: mux MT7530's phy4 to SoC's gmac1 + - | + #include + #include + + platform { + pinctrl { + example5_rgmii2_pins: rgmii2-pins { + pinmux { + groups = "rgmii2"; + function = "rgmii2"; + }; + }; }; - mdio: mdio-bus { + ethernet { #address-cells = <1>; #size-cells = <0>; - /* Internal phy */ - phy4: ethernet-phy@4 { - reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&example5_rgmii2_pins>; + + mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + + phy-handle = <&example5_ethphy4>; }; - mt7530: switch@1f { - compatible = "mediatek,mt7621"; - reg = <0x1f>; - mediatek,mcm; + mdio { + #address-cells = <1>; + #size-cells = <0>; - resets = <&rstctrl 2>; - reset-names = "mcm"; + /* MT7530's phy4 */ + example5_ethphy4: ethernet-phy@4 { + reg = <4>; + }; - ethernet-ports { - #address-cells = <1>; - #size-cells = <0>; + switch@0 { + compatible = "mediatek,mt7621"; + reg = <0>; - port@0 { - reg = <0>; - label = "lan0"; - }; + mediatek,mcm; + resets = <&sysc MT7621_RST_MCM>; + reset-names = "mcm"; - port@1 { - reg = <1>; - label = "lan1"; - }; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; - port@2 { - reg = <2>; - label = "lan2"; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; - port@3 { - reg = <3>; - label = "lan3"; - }; + port@0 { + reg = <0>; + label = "lan1"; + }; - /* Commented out. Port 4 is handled by 2nd GMAC. - port@4 { - reg = <4>; - label = "lan4"; - }; - */ + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; + port@3 { + reg = <3>; + label = "lan4"; + }; - fixed-link { - speed = <1000>; - full-duplex; - pause; + /* Commented out, phy4 is muxed to gmac1. + port@4 { + reg = <4>; + label = "wan"; + }; + */ + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; }; }; }; @@ -318,87 +683,197 @@ examples: }; }; + # Example 6: MT7621: mux external phy to SoC's gmac1 - | - //Example 3: MT7621: Port 5 is connected to external PHY: Port 5 -> external PHY. - - ethernet { - #address-cells = <1>; - #size-cells = <0>; - gmac_0: mac@0 { - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - pause; + #include + #include + + platform { + pinctrl { + example6_rgmii2_pins: rgmii2-pins { + pinmux { + groups = "rgmii2"; + function = "rgmii2"; + }; }; }; - mdio0: mdio-bus { + ethernet { #address-cells = <1>; #size-cells = <0>; - /* External phy */ - ephy5: ethernet-phy@7 { - reg = <7>; + pinctrl-names = "default"; + pinctrl-0 = <&example6_rgmii2_pins>; + + mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + + phy-handle = <&example6_ethphy7>; + phy-mode = "rgmii"; }; - switch@1f { - compatible = "mediatek,mt7621"; - reg = <0x1f>; - mediatek,mcm; + mdio { + #address-cells = <1>; + #size-cells = <0>; - resets = <&rstctrl 2>; - reset-names = "mcm"; + /* External PHY */ + example6_ethphy7: ethernet-phy@7 { + reg = <7>; + phy-mode = "rgmii"; + }; - ethernet-ports { - #address-cells = <1>; - #size-cells = <0>; + switch@0 { + compatible = "mediatek,mt7621"; + reg = <0>; - port@0 { - reg = <0>; - label = "lan0"; - }; + mediatek,mcm; + resets = <&sysc MT7621_RST_MCM>; + reset-names = "mcm"; - port@1 { - reg = <1>; - label = "lan1"; - }; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; - port@2 { - reg = <2>; - label = "lan2"; - }; + ports { + #address-cells = <1>; + #size-cells = <0>; - port@3 { - reg = <3>; - label = "lan3"; - }; + port@0 { + reg = <0>; + label = "lan1"; + }; - port@4 { - reg = <4>; - label = "lan4"; - }; + port@1 { + reg = <1>; + label = "lan2"; + }; - port@5 { - reg = <5>; - label = "lan5"; - phy-mode = "rgmii"; - phy-handle = <&ephy5>; + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; }; + }; + }; + }; + }; + + # Example 7: MT7621: mux external phy to MT7530's port 5 + - | + #include + #include + + platform { + pinctrl { + example7_rgmii2_pins: rgmii2-pins { + pinmux { + groups = "rgmii2"; + function = "gpio"; + }; + }; + }; + + ethernet { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&example7_rgmii2_pins>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + /* External PHY */ + example7_ethphy7: ethernet-phy@7 { + reg = <7>; + }; + + switch@0 { + compatible = "mediatek,mt7621"; + reg = <0>; + + mediatek,mcm; + resets = <&sysc MT7621_RST_MCM>; + reset-names = "mcm"; - cpu_port0: port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac_0>; - phy-mode = "rgmii"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + }; + + port@1 { + reg = <1>; + label = "lan2"; + }; + + port@2 { + reg = <2>; + label = "lan3"; + }; + + port@3 { + reg = <3>; + label = "lan4"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "extphy"; + phy-mode = "rgmii-txid"; + phy-handle = <&example7_ethphy7>; + }; - fixed-link { - speed = <1000>; - full-duplex; - pause; + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "trgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; }; }; };