@@ -24,9 +24,12 @@ &fman0 {
/* these aliases provide the FMan ports mapping */
enet0: ethernet@e0000 {
+ pcs-names = "qsgmii";
};
enet1: ethernet@e2000 {
+ pcsphy-handle = <&pcsphy1>, <&qsgmiib_pcs1>;
+ pcs-names = "sgmii", "qsgmii";
};
enet2: ethernet@e4000 {
@@ -36,11 +39,32 @@ enet3: ethernet@e6000 {
};
enet4: ethernet@e8000 {
+ pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs2>;
+ pcs-names = "sgmii", "qsgmii";
};
enet5: ethernet@ea000 {
+ pcsphy-handle = <&pcsphy5>, <&qsgmiib_pcs3>;
+ pcs-names = "sgmii", "qsgmii";
};
enet6: ethernet@f0000 {
};
+
+ mdio@e1000 {
+ qsgmiib_pcs1: ethernet-pcs@1 {
+ compatible = "fsl,lynx-pcs";
+ reg = <0x1>;
+ };
+
+ qsgmiib_pcs2: ethernet-pcs@2 {
+ compatible = "fsl,lynx-pcs";
+ reg = <0x2>;
+ };
+
+ qsgmiib_pcs3: ethernet-pcs@3 {
+ compatible = "fsl,lynx-pcs";
+ reg = <0x3>;
+ };
+ };
};
@@ -23,6 +23,8 @@ &soc {
&fman0 {
/* these aliases provide the FMan ports mapping */
enet0: ethernet@e0000 {
+ pcsphy-handle = <&qsgmiib_pcs3>;
+ pcs-names = "qsgmii";
};
enet1: ethernet@e2000 {
@@ -35,14 +37,37 @@ enet3: ethernet@e6000 {
};
enet4: ethernet@e8000 {
+ pcsphy-handle = <&pcsphy4>, <&qsgmiib_pcs1>;
+ pcs-names = "sgmii", "qsgmii";
};
enet5: ethernet@ea000 {
+ pcsphy-handle = <&pcsphy5>, <&pcsphy5>;
+ pcs-names = "sgmii", "qsgmii";
};
enet6: ethernet@f0000 {
};
enet7: ethernet@f2000 {
+ pcsphy-handle = <&pcsphy7>, <&qsgmiib_pcs2>, <&pcsphy7>;
+ pcs-names = "sgmii", "qsgmii", "xfi";
+ };
+
+ mdio@eb000 {
+ qsgmiib_pcs1: ethernet-pcs@1 {
+ compatible = "fsl,lynx-pcs";
+ reg = <0x1>;
+ };
+
+ qsgmiib_pcs2: ethernet-pcs@2 {
+ compatible = "fsl,lynx-pcs";
+ reg = <0x2>;
+ };
+
+ qsgmiib_pcs3: ethernet-pcs@3 {
+ compatible = "fsl,lynx-pcs";
+ reg = <0x3>;
+ };
};
};
Now that we actually read registers from QSGMII PCSs, it's important that we have the correct address (instead of hoping that we're the MAC with all the QSGMII PCSs on its bus). This adds nodes for the QSGMII PCSs. The exact mapping of QSGMII to MACs depends on the SoC. Since the first QSGMII PCSs share an address with the SGMII and XFI PCSs, we only add new nodes for PCSs 2-4. This avoids address conflicts on the bus. Signed-off-by: Sean Anderson <sean.anderson@seco.com> --- Changes in v3: - Split this patch off from the previous one Changes in v2: - New .../boot/dts/freescale/fsl-ls1043-post.dtsi | 24 ++++++++++++++++++ .../boot/dts/freescale/fsl-ls1046-post.dtsi | 25 +++++++++++++++++++ 2 files changed, 49 insertions(+)