From patchwork Fri Jul 8 10:52:31 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andre Przywara X-Patchwork-Id: 588681 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id B63A4C43334 for ; Fri, 8 Jul 2022 10:52:55 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238092AbiGHKwz (ORCPT ); Fri, 8 Jul 2022 06:52:55 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56458 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238086AbiGHKwv (ORCPT ); Fri, 8 Jul 2022 06:52:51 -0400 Received: from foss.arm.com (foss.arm.com [217.140.110.172]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 2FEAB84EFE; Fri, 8 Jul 2022 03:52:50 -0700 (PDT) Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id 5825D1682; Fri, 8 Jul 2022 03:52:50 -0700 (PDT) Received: from donnerap.arm.com (donnerap.cambridge.arm.com [10.1.197.42]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id 695613F70D; Fri, 8 Jul 2022 03:52:48 -0700 (PDT) From: Andre Przywara To: Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Rob Herring , Krzysztof Kozlowski Cc: Linus Walleij , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org Subject: [PATCH v13 3/7] arm64: dts: allwinner: Add Allwinner H616 .dtsi file Date: Fri, 8 Jul 2022 11:52:31 +0100 Message-Id: <20220708105235.3983266-4-andre.przywara@arm.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220708105235.3983266-1-andre.przywara@arm.com> References: <20220708105235.3983266-1-andre.przywara@arm.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org This (relatively) new SoC is similar to the H6, but drops the (broken) PCIe support and the USB 3.0 controller. It also gets the management controller removed, which in turn removes *some*, but not all of the devices formerly dedicated to the ARISC (CPUS). And while there is still the extra sunxi interrupt controller, the package lacks the corresponding NMI pin, so no interrupts for the PMIC. The reserved memory node is actually handled by Trusted Firmware now, but U-Boot fails to propagate this to a separately loaded DTB, so we keep it in here for now, until U-Boot learns to do this properly. Signed-off-by: Andre Przywara Reviewed-by: Samuel Holland --- .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 591 ++++++++++++++++++ 1 file changed, 591 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi new file mode 100644 index 0000000000000..8a81baf7de249 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi @@ -0,0 +1,591 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (C) 2020 Arm Ltd. +// based on the H6 dtsi, which is: +// Copyright (C) 2017 Icenowy Zheng + +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <0>; + enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <1>; + enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <2>; + enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + reg = <3>; + enable-method = "psci"; + clocks = <&ccu CLK_CPUX>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* + * 256 KiB reserved for Trusted Firmware-A (BL31). + * This is added by BL31 itself, but some bootloaders fail + * to propagate this into the DTB handed to kernels. + */ + secmon@40000000 { + reg = <0x0 0x40000000 0x0 0x40000>; + no-map; + }; + }; + + osc24M: osc24M-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = , + , + , + ; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + arm,no-tick-in-suspend; + interrupts = , + , + , + ; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x40000000>; + + syscon: syscon@3000000 { + compatible = "allwinner,sun50i-h616-system-control"; + reg = <0x03000000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + sram_c: sram@28000 { + compatible = "mmio-sram"; + reg = <0x00028000 0x30000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00028000 0x30000>; + }; + }; + + ccu: clock@3001000 { + compatible = "allwinner,sun50i-h616-ccu"; + reg = <0x03001000 0x1000>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>; + clock-names = "hosc", "losc", "iosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + watchdog: watchdog@30090a0 { + compatible = "allwinner,sun50i-h616-wdt", + "allwinner,sun6i-a31-wdt"; + reg = <0x030090a0 0x20>; + interrupts = ; + clocks = <&osc24M>; + }; + + pio: pinctrl@300b000 { + compatible = "allwinner,sun50i-h616-pinctrl"; + reg = <0x0300b000 0x400>; + interrupts = , + , + , + , + , + , + , + ; + clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + ext_rgmii_pins: rgmii-pins { + pins = "PI0", "PI1", "PI2", "PI3", "PI4", + "PI5", "PI7", "PI8", "PI9", "PI10", + "PI11", "PI12", "PI13", "PI14", "PI15", + "PI16"; + function = "emac0"; + drive-strength = <40>; + }; + + i2c0_pins: i2c0-pins { + pins = "PI6", "PI7"; + function = "i2c0"; + }; + + i2c3_ph_pins: i2c3-ph-pins { + pins = "PH4", "PH5"; + function = "i2c3"; + }; + + ir_rx_pin: ir-rx-pin { + pins = "PH10"; + function = "ir_rx"; + }; + + mmc0_pins: mmc0-pins { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + /omit-if-no-ref/ + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_pins: mmc2-pins { + pins = "PC0", "PC1", "PC5", "PC6", + "PC8", "PC9", "PC10", "PC11", + "PC13", "PC14", "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + /omit-if-no-ref/ + spi0_pins: spi0-pins { + pins = "PC0", "PC2", "PC4"; + function = "spi0"; + }; + + /omit-if-no-ref/ + spi0_cs0_pin: spi0-cs0-pin { + pins = "PC3"; + function = "spi0"; + }; + + /omit-if-no-ref/ + spi1_pins: spi1-pins { + pins = "PH6", "PH7", "PH8"; + function = "spi1"; + }; + + /omit-if-no-ref/ + spi1_cs0_pin: spi1-cs0-pin { + pins = "PH5"; + function = "spi1"; + }; + + uart0_ph_pins: uart0-ph-pins { + pins = "PH0", "PH1"; + function = "uart0"; + }; + + /omit-if-no-ref/ + uart1_pins: uart1-pins { + pins = "PG6", "PG7"; + function = "uart1"; + }; + + /omit-if-no-ref/ + uart1_rts_cts_pins: uart1-rts-cts-pins { + pins = "PG8", "PG9"; + function = "uart1"; + }; + }; + + gic: interrupt-controller@3021000 { + compatible = "arm,gic-400"; + reg = <0x03021000 0x1000>, + <0x03022000 0x2000>, + <0x03024000 0x2000>, + <0x03026000 0x2000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + }; + + mmc0: mmc@4020000 { + compatible = "allwinner,sun50i-h616-mmc", + "allwinner,sun50i-a100-mmc"; + reg = <0x04020000 0x1000>; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + status = "disabled"; + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-3_3v; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@4021000 { + compatible = "allwinner,sun50i-h616-mmc", + "allwinner,sun50i-a100-mmc"; + reg = <0x04021000 0x1000>; + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + status = "disabled"; + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-3_3v; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@4022000 { + compatible = "allwinner,sun50i-h616-emmc", + "allwinner,sun50i-a100-emmc"; + reg = <0x04022000 0x1000>; + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + status = "disabled"; + max-frequency = <150000000>; + cap-sd-highspeed; + cap-mmc-highspeed; + mmc-ddr-3_3v; + cap-sdio-irq; + #address-cells = <1>; + #size-cells = <0>; + }; + + uart0: serial@5000000 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; + status = "disabled"; + }; + + uart1: serial@5000400 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000400 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + status = "disabled"; + }; + + uart2: serial@5000800 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000800 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + status = "disabled"; + }; + + uart3: serial@5000c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x05000c00 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + status = "disabled"; + }; + + uart4: serial@5001000 { + compatible = "snps,dw-apb-uart"; + reg = <0x05001000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART4>; + resets = <&ccu RST_BUS_UART4>; + status = "disabled"; + }; + + uart5: serial@5001400 { + compatible = "snps,dw-apb-uart"; + reg = <0x05001400 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART5>; + resets = <&ccu RST_BUS_UART5>; + status = "disabled"; + }; + + i2c0: i2c@5002000 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@5002400 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002400 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@5002800 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002800 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c3: i2c@5002c00 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05002c00 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C3>; + resets = <&ccu RST_BUS_I2C3>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c4: i2c@5003000 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x05003000 0x400>; + interrupts = ; + clocks = <&ccu CLK_BUS_I2C4>; + resets = <&ccu RST_BUS_I2C4>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi0: spi@5010000 { + compatible = "allwinner,sun50i-h616-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x05010000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@5011000 { + compatible = "allwinner,sun50i-h616-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x05011000 0x1000>; + interrupts = ; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + emac0: ethernet@5020000 { + compatible = "allwinner,sun50i-h616-emac", + "allwinner,sun50i-a64-emac"; + reg = <0x05020000 0x10000>; + interrupts = ; + interrupt-names = "macirq"; + clocks = <&ccu CLK_BUS_EMAC0>; + clock-names = "stmmaceth"; + resets = <&ccu RST_BUS_EMAC0>; + reset-names = "stmmaceth"; + syscon = <&syscon>; + status = "disabled"; + + mdio0: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + rtc: rtc@7000000 { + compatible = "allwinner,sun50i-h616-rtc"; + reg = <0x07000000 0x400>; + interrupts = ; + clocks = <&r_ccu CLK_R_APB1_RTC>, <&osc24M>, + <&ccu CLK_PLL_SYSTEM_32K>; + clock-names = "bus", "hosc", + "pll-32k"; + #clock-cells = <1>; + }; + + r_ccu: clock@7010000 { + compatible = "allwinner,sun50i-h616-r-ccu"; + reg = <0x07010000 0x210>; + clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>, + <&ccu CLK_PLL_PERIPH0>; + clock-names = "hosc", "losc", "iosc", "pll-periph"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + r_pio: pinctrl@7022000 { + compatible = "allwinner,sun50i-h616-r-pinctrl"; + reg = <0x07022000 0x400>; + clocks = <&r_ccu CLK_R_APB1>, <&osc24M>, + <&rtc CLK_OSC32K>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + + /omit-if-no-ref/ + r_i2c_pins: r-i2c-pins { + pins = "PL0", "PL1"; + function = "s_i2c"; + }; + + r_rsb_pins: r-rsb-pins { + pins = "PL0", "PL1"; + function = "s_rsb"; + }; + }; + + ir: ir@7040000 { + compatible = "allwinner,sun50i-h616-ir", + "allwinner,sun6i-a31-ir"; + reg = <0x07040000 0x400>; + interrupts = ; + clocks = <&r_ccu CLK_R_APB1_IR>, + <&r_ccu CLK_IR>; + clock-names = "apb", "ir"; + resets = <&r_ccu RST_R_APB1_IR>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_rx_pin>; + status = "disabled"; + }; + + r_i2c: i2c@7081400 { + compatible = "allwinner,sun50i-h616-i2c", + "allwinner,sun8i-v536-i2c", + "allwinner,sun6i-a31-i2c"; + reg = <0x07081400 0x400>; + interrupts = ; + clocks = <&r_ccu CLK_R_APB2_I2C>; + resets = <&r_ccu RST_R_APB2_I2C>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + r_rsb: rsb@7083000 { + compatible = "allwinner,sun50i-h616-rsb", + "allwinner,sun8i-a23-rsb"; + reg = <0x07083000 0x400>; + interrupts = ; + clocks = <&r_ccu CLK_R_APB2_RSB>; + clock-frequency = <3000000>; + resets = <&r_ccu RST_R_APB2_RSB>; + pinctrl-names = "default"; + pinctrl-0 = <&r_rsb_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +};