diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
index 001ca2c3ff95..f1d7d4b5e222 100644
--- a/drivers/iio/imu/Kconfig
+++ b/drivers/iio/imu/Kconfig
@@ -52,6 +52,7 @@ config ADIS16480
 	  ADIS16485, ADIS16488 inertial sensors.
 
 source "drivers/iio/imu/bmi160/Kconfig"
+source "drivers/iio/imu/bno055/Kconfig"
 
 config FXOS8700
 	tristate
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
index c82748096c77..6eb612034722 100644
--- a/drivers/iio/imu/Makefile
+++ b/drivers/iio/imu/Makefile
@@ -15,6 +15,7 @@ adis_lib-$(CONFIG_IIO_ADIS_LIB_BUFFER) += adis_buffer.o
 obj-$(CONFIG_IIO_ADIS_LIB) += adis_lib.o
 
 obj-y += bmi160/
+obj-y += bno055/
 
 obj-$(CONFIG_FXOS8700) += fxos8700_core.o
 obj-$(CONFIG_FXOS8700_I2C) += fxos8700_i2c.o
diff --git a/drivers/iio/imu/bno055/Kconfig b/drivers/iio/imu/bno055/Kconfig
new file mode 100644
index 000000000000..d0ab3221fba5
--- /dev/null
+++ b/drivers/iio/imu/bno055/Kconfig
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config BOSCH_BNO055_IIO
+	tristate
diff --git a/drivers/iio/imu/bno055/Makefile b/drivers/iio/imu/bno055/Makefile
new file mode 100644
index 000000000000..56cc4de60a7e
--- /dev/null
+++ b/drivers/iio/imu/bno055/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_BOSCH_BNO055_IIO) += bno055.o
diff --git a/drivers/iio/imu/bno055/bno055.c b/drivers/iio/imu/bno055/bno055.c
new file mode 100644
index 000000000000..5d48a8d8973e
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055.c
@@ -0,0 +1,1712 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * IIO driver for Bosch BNO055 IMU
+ *
+ * Copyright (C) 2021-2022 Istituto Italiano di Tecnologia
+ * Electronic Design Laboratory
+ * Written by Andrea Merello <andrea.merello@iit.it>
+ *
+ * Portions of this driver are taken from the BNO055 driver patch
+ * from Vlad Dogaru which is Copyright (c) 2016, Intel Corporation.
+ *
+ * This driver is also based on BMI160 driver, which is:
+ *	Copyright (c) 2016, Intel Corporation.
+ *	Copyright (c) 2019, Martin Kelly.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitmap.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/util_macros.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include "bno055.h"
+
+#define BNO055_FW_UID_FMT "bno055-caldata-%*phN.dat"
+#define BNO055_FW_GENERIC_NAME "bno055-caldata.dat"
+
+/* common registers */
+#define BNO055_PAGESEL_REG		0x7
+
+/* page 0 registers */
+#define BNO055_CHIP_ID_REG		0x0
+#define BNO055_CHIP_ID_MAGIC 0xA0
+#define BNO055_SW_REV_LSB_REG		0x4
+#define BNO055_SW_REV_MSB_REG		0x5
+#define BNO055_ACC_DATA_X_LSB_REG	0x8
+#define BNO055_ACC_DATA_Y_LSB_REG	0xA
+#define BNO055_ACC_DATA_Z_LSB_REG	0xC
+#define BNO055_MAG_DATA_X_LSB_REG	0xE
+#define BNO055_MAG_DATA_Y_LSB_REG	0x10
+#define BNO055_MAG_DATA_Z_LSB_REG	0x12
+#define BNO055_GYR_DATA_X_LSB_REG	0x14
+#define BNO055_GYR_DATA_Y_LSB_REG	0x16
+#define BNO055_GYR_DATA_Z_LSB_REG	0x18
+#define BNO055_EUL_DATA_X_LSB_REG	0x1A
+#define BNO055_EUL_DATA_Y_LSB_REG	0x1C
+#define BNO055_EUL_DATA_Z_LSB_REG	0x1E
+#define BNO055_QUAT_DATA_W_LSB_REG	0x20
+#define BNO055_LIA_DATA_X_LSB_REG	0x28
+#define BNO055_LIA_DATA_Y_LSB_REG	0x2A
+#define BNO055_LIA_DATA_Z_LSB_REG	0x2C
+#define BNO055_GRAVITY_DATA_X_LSB_REG	0x2E
+#define BNO055_GRAVITY_DATA_Y_LSB_REG	0x30
+#define BNO055_GRAVITY_DATA_Z_LSB_REG	0x32
+#define BNO055_SCAN_CH_COUNT ((BNO055_GRAVITY_DATA_Z_LSB_REG - BNO055_ACC_DATA_X_LSB_REG) / 2)
+#define BNO055_TEMP_REG			0x34
+#define BNO055_CALIB_STAT_REG		0x35
+#define BNO055_CALIB_STAT_MASK GENMASK(1, 0)
+#define BNO055_CALIB_STAT_MAGN_SHIFT 0
+#define BNO055_CALIB_STAT_ACCEL_SHIFT 2
+#define BNO055_CALIB_STAT_GYRO_SHIFT 4
+#define BNO055_CALIB_STAT_SYS_SHIFT 6
+#define BNO055_SYS_ERR_REG		0x3A
+#define BNO055_POWER_MODE_REG		0x3E
+#define BNO055_POWER_MODE_NORMAL 0
+#define BNO055_SYS_TRIGGER_REG		0x3F
+#define BNO055_SYS_TRIGGER_RST_SYS BIT(5)
+#define BNO055_SYS_TRIGGER_CLK_SEL BIT(7)
+#define BNO055_OPR_MODE_REG		0x3D
+#define BNO055_OPR_MODE_CONFIG 0x0
+#define BNO055_OPR_MODE_AMG 0x7
+#define BNO055_OPR_MODE_FUSION_FMC_OFF 0xB
+#define BNO055_OPR_MODE_FUSION 0xC
+#define BNO055_UNIT_SEL_REG		0x3B
+/* Android orientation mode means: pitch value decreases turning clockwise */
+#define BNO055_UNIT_SEL_ANDROID BIT(7)
+#define BNO055_UNIT_SEL_GYR_RPS BIT(1)
+#define BNO055_CALDATA_START		0x55
+#define BNO055_CALDATA_END		0x6A
+#define BNO055_CALDATA_LEN 22
+
+/*
+ * The difference in address between the register that contains the
+ * value and the register that contains the offset.  This applies for
+ * accel, gyro and magn channels.
+ */
+#define BNO055_REG_OFFSET_ADDR		0x4D
+
+/* page 1 registers */
+#define BNO055_PG1(x) ((x) | 0x80)
+#define BNO055_ACC_CONFIG_REG		BNO055_PG1(0x8)
+#define BNO055_ACC_CONFIG_LPF_MASK GENMASK(4, 2)
+#define BNO055_ACC_CONFIG_RANGE_MASK GENMASK(1, 0)
+#define BNO055_MAG_CONFIG_REG		BNO055_PG1(0x9)
+#define BNO055_MAG_CONFIG_HIGHACCURACY 0x18
+#define BNO055_MAG_CONFIG_ODR_MASK GENMASK(2, 0)
+#define BNO055_GYR_CONFIG_REG		BNO055_PG1(0xA)
+#define BNO055_GYR_CONFIG_RANGE_MASK GENMASK(2, 0)
+#define BNO055_GYR_CONFIG_LPF_MASK GENMASK(5, 3)
+#define BNO055_GYR_AM_SET_REG		BNO055_PG1(0x1F)
+#define BNO055_UID_LOWER_REG		BNO055_PG1(0x50)
+#define BNO055_UID_HIGHER_REG		BNO055_PG1(0x5F)
+#define BNO055_UID_LEN 16
+
+struct bno055_sysfs_attr {
+	int *vals;
+	int len;
+	int *fusion_vals;
+	int *hw_xlate;
+	int type;
+};
+
+static int bno055_acc_lpf_vals[] = {
+	7, 810000, 15, 630000, 31, 250000, 62, 500000,
+	125, 0, 250, 0, 500, 0, 1000, 0
+};
+
+static struct bno055_sysfs_attr bno055_acc_lpf = {
+	.vals = bno055_acc_lpf_vals,
+	.len = ARRAY_SIZE(bno055_acc_lpf_vals),
+	.fusion_vals = (int[]){62, 500000},
+	.type = IIO_VAL_INT_PLUS_MICRO,
+};
+
+				 /* G:   2,    4,    8,    16 */
+static int bno055_acc_range_vals[] = {1962, 3924, 7848, 15696};
+
+static struct bno055_sysfs_attr bno055_acc_range = {
+	.vals = bno055_acc_range_vals,
+	.len = ARRAY_SIZE(bno055_acc_range_vals),
+	.fusion_vals = (int[]){3924}, /* 4G */
+	.type = IIO_VAL_INT,
+};
+
+/*
+ * Theoretically the IMU should return data in a given (i.e. fixed) unit
+ * regardless of the range setting. This happens for the accelerometer, but not
+ * for the gyroscope; the gyroscope range setting affects the scale.
+ * This is probably due to this[0] bug.
+ * For this reason we map the internal range setting onto the standard IIO scale
+ * attribute for gyro.
+ * Since the bug[0] may be fixed in future, we check for the IMU FW version and
+ * eventually warn the user.
+ * Currently we just don't care about "range" attributes for gyro.
+ *
+ * [0]  https://community.bosch-sensortec.com/t5/MEMS-sensors-forum/BNO055-Wrong-sensitivity-resolution-in-datasheet/td-p/10266
+ */
+
+/*
+ * dps = hwval * (dps_range/2^15)
+ * rps = hwval * (rps_range/2^15)
+ *     = hwval * (dps_range/(2^15 * k))
+ * where k is rad-to-deg factor
+ */
+static int bno055_gyr_scale_vals[] = {
+	125, 1877467, 250, 1877467, 500, 1877467,
+	1000, 1877467, 2000, 1877467
+};
+
+static struct bno055_sysfs_attr bno055_gyr_scale = {
+	.vals = bno055_gyr_scale_vals,
+	.len = ARRAY_SIZE(bno055_gyr_scale_vals),
+	.fusion_vals = (int[]){1, 900},
+	.hw_xlate = (int[]){4, 3, 2, 1, 0},
+	.type = IIO_VAL_FRACTIONAL,
+};
+
+static int bno055_gyr_lpf_vals[] = {12, 23, 32, 47, 64, 116, 230, 523};
+static struct bno055_sysfs_attr bno055_gyr_lpf = {
+	.vals = bno055_gyr_lpf_vals,
+	.len = ARRAY_SIZE(bno055_gyr_lpf_vals),
+	.fusion_vals = (int[]){32},
+	.hw_xlate = (int[]){5, 4, 7, 3, 6, 2, 1, 0},
+	.type = IIO_VAL_INT,
+};
+
+static int bno055_mag_odr_vals[] = {2, 6, 8, 10, 15, 20, 25, 30};
+static struct bno055_sysfs_attr bno055_mag_odr = {
+	.vals = bno055_mag_odr_vals,
+	.len =  ARRAY_SIZE(bno055_mag_odr_vals),
+	.fusion_vals = (int[]){20},
+	.type = IIO_VAL_INT,
+};
+
+struct bno055_priv {
+	struct regmap *regmap;
+	struct device *dev;
+	struct clk *clk;
+	int operation_mode;
+	int xfer_burst_break_thr;
+	struct mutex lock;
+	u8 uid[BNO055_UID_LEN];
+	struct gpio_desc *reset_gpio;
+	bool sw_reset;
+	struct {
+		__le16 chans[BNO055_SCAN_CH_COUNT];
+		s64 timestamp __aligned(8);
+	} buf;
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debugfs;
+#endif
+};
+
+static bool bno055_regmap_volatile(struct device *dev, unsigned int reg)
+{
+	/* data and status registers */
+	if (reg >= BNO055_ACC_DATA_X_LSB_REG && reg <= BNO055_SYS_ERR_REG)
+		return true;
+
+	/* when in fusion mode, config is updated by chip */
+	if (reg == BNO055_MAG_CONFIG_REG ||
+	    reg == BNO055_ACC_CONFIG_REG ||
+	    reg == BNO055_GYR_CONFIG_REG)
+		return true;
+
+	/* calibration data may be updated by the IMU */
+	if (reg >= BNO055_CALDATA_START && reg <= BNO055_CALDATA_END)
+		return true;
+
+	return false;
+}
+
+static bool bno055_regmap_readable(struct device *dev, unsigned int reg)
+{
+	/* unnamed PG0 reserved areas */
+	if ((reg < BNO055_PG1(0) && reg > BNO055_CALDATA_END) ||
+	    reg == 0x3C)
+		return false;
+
+	/* unnamed PG1 reserved areas */
+	if (reg > BNO055_PG1(BNO055_UID_HIGHER_REG) ||
+	    (reg < BNO055_PG1(BNO055_UID_LOWER_REG) && reg > BNO055_PG1(BNO055_GYR_AM_SET_REG)) ||
+	    reg == BNO055_PG1(0xE) ||
+	    (reg < BNO055_PG1(BNO055_PAGESEL_REG) && reg >= BNO055_PG1(0x0)))
+		return false;
+	return true;
+}
+
+static bool bno055_regmap_writeable(struct device *dev, unsigned int reg)
+{
+	/*
+	 * Unreadable registers are indeed reserved; there are no WO regs
+	 * (except for a single bit in SYS_TRIGGER register)
+	 */
+	if (!bno055_regmap_readable(dev, reg))
+		return false;
+
+	/* data and status registers */
+	if (reg >= BNO055_ACC_DATA_X_LSB_REG && reg <= BNO055_SYS_ERR_REG)
+		return false;
+
+	/* ID areas */
+	if (reg < BNO055_PAGESEL_REG ||
+	    (reg <= BNO055_UID_HIGHER_REG && reg >= BNO055_UID_LOWER_REG))
+		return false;
+
+	return true;
+}
+
+static const struct regmap_range_cfg bno055_regmap_ranges[] = {
+	{
+		.range_min = 0,
+		.range_max = 0x7f * 2,
+		.selector_reg = BNO055_PAGESEL_REG,
+		.selector_mask = GENMASK(7, 0),
+		.selector_shift = 0,
+		.window_start = 0,
+		.window_len = 0x80,
+	},
+};
+
+const struct regmap_config bno055_regmap_config = {
+	.name = "bno055",
+	.reg_bits = 8,
+	.val_bits = 8,
+	.ranges = bno055_regmap_ranges,
+	.num_ranges = 1,
+	.volatile_reg = bno055_regmap_volatile,
+	.max_register = 0x80 * 2,
+	.writeable_reg = bno055_regmap_writeable,
+	.readable_reg = bno055_regmap_readable,
+	.cache_type = REGCACHE_RBTREE,
+};
+EXPORT_SYMBOL_NS_GPL(bno055_regmap_config, IIO_BNO055);
+
+/* must be called in configuration mode */
+static int bno055_calibration_load(struct bno055_priv *priv, const u8 *data, int len)
+{
+	if (len != BNO055_CALDATA_LEN) {
+		dev_dbg(priv->dev, "Invalid calibration file size %d (expected %d)",
+			len, BNO055_CALDATA_LEN);
+		return -EINVAL;
+	}
+
+	dev_dbg(priv->dev, "loading cal data: %*ph", BNO055_CALDATA_LEN, data);
+	return regmap_bulk_write(priv->regmap, BNO055_CALDATA_START,
+				 data, BNO055_CALDATA_LEN);
+}
+
+static int bno055_operation_mode_do_set(struct bno055_priv *priv,
+					int operation_mode)
+{
+	int ret;
+
+	ret = regmap_write(priv->regmap, BNO055_OPR_MODE_REG,
+			   operation_mode);
+	if (ret)
+		return ret;
+
+	/* Following datasheet specifications: sensor takes 7mS up to 19 mS to switch mode */
+	msleep(20);
+
+	return 0;
+}
+
+static int bno055_system_reset(struct bno055_priv *priv)
+{
+	int ret;
+
+	if (priv->reset_gpio) {
+		gpiod_set_value_cansleep(priv->reset_gpio, 0);
+		usleep_range(5000, 10000);
+		gpiod_set_value_cansleep(priv->reset_gpio, 1);
+	} else if (priv->sw_reset) {
+		ret = regmap_write(priv->regmap, BNO055_SYS_TRIGGER_REG,
+				   BNO055_SYS_TRIGGER_RST_SYS);
+		if (ret)
+			return ret;
+	} else {
+		return 0;
+	}
+
+	regcache_drop_region(priv->regmap, 0x0, 0xff);
+	usleep_range(650000, 700000);
+
+	return 0;
+}
+
+static int bno055_init(struct bno055_priv *priv, const u8 *caldata, int len)
+{
+	int ret;
+
+	ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(priv->regmap, BNO055_POWER_MODE_REG,
+			   BNO055_POWER_MODE_NORMAL);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(priv->regmap, BNO055_SYS_TRIGGER_REG,
+			   priv->clk ? BNO055_SYS_TRIGGER_CLK_SEL : 0);
+	if (ret)
+		return ret;
+
+	/* use standard SI units */
+	ret = regmap_write(priv->regmap, BNO055_UNIT_SEL_REG,
+			   BNO055_UNIT_SEL_ANDROID | BNO055_UNIT_SEL_GYR_RPS);
+	if (ret)
+		return ret;
+
+	if (caldata) {
+		ret = bno055_calibration_load(priv, caldata, len);
+		if (ret)
+			dev_warn(priv->dev, "failed to load calibration data with error %d\n",
+				 ret);
+	}
+
+	return 0;
+}
+
+static ssize_t bno055_operation_mode_set(struct bno055_priv *priv,
+					 int operation_mode)
+{
+	u8 caldata[BNO055_CALDATA_LEN];
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		goto exit_unlock;
+
+	if (operation_mode == BNO055_OPR_MODE_FUSION ||
+	    operation_mode == BNO055_OPR_MODE_FUSION_FMC_OFF) {
+		/* for entering fusion mode, reset the chip to clear the algo state */
+		ret = regmap_bulk_read(priv->regmap, BNO055_CALDATA_START, caldata,
+				       BNO055_CALDATA_LEN);
+		if (ret)
+			goto exit_unlock;
+
+		ret = bno055_system_reset(priv);
+		if (ret)
+			goto exit_unlock;
+
+		ret = bno055_init(priv, caldata, BNO055_CALDATA_LEN);
+		if (ret)
+			goto exit_unlock;
+	}
+
+	ret = bno055_operation_mode_do_set(priv, operation_mode);
+	if (ret)
+		goto exit_unlock;
+
+	priv->operation_mode = operation_mode;
+
+exit_unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static void bno055_uninit(void *arg)
+{
+	struct bno055_priv *priv = arg;
+
+	/* stop the IMU */
+	bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+}
+
+#define BNO055_CHANNEL(_type, _axis, _index, _address, _sep, _sh, _avail) {	\
+	.address = _address,							\
+	.type = _type,								\
+	.modified = 1,								\
+	.channel2 = IIO_MOD_##_axis,						\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | (_sep),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | (_sh),		\
+	.info_mask_shared_by_type_available = _avail,				\
+	.scan_index = _index,							\
+	.scan_type = {								\
+		.sign = 's',							\
+		.realbits = 16,							\
+		.storagebits = 16,						\
+		.endianness = IIO_LE,						\
+		.repeat = IIO_MOD_##_axis == IIO_MOD_QUATERNION ? 4 : 0,        \
+	},									\
+}
+
+/* scan indexes follow DATA register order */
+enum bno055_scan_axis {
+	BNO055_SCAN_ACCEL_X,
+	BNO055_SCAN_ACCEL_Y,
+	BNO055_SCAN_ACCEL_Z,
+	BNO055_SCAN_MAGN_X,
+	BNO055_SCAN_MAGN_Y,
+	BNO055_SCAN_MAGN_Z,
+	BNO055_SCAN_GYRO_X,
+	BNO055_SCAN_GYRO_Y,
+	BNO055_SCAN_GYRO_Z,
+	BNO055_SCAN_YAW,
+	BNO055_SCAN_ROLL,
+	BNO055_SCAN_PITCH,
+	BNO055_SCAN_QUATERNION,
+	BNO055_SCAN_LIA_X,
+	BNO055_SCAN_LIA_Y,
+	BNO055_SCAN_LIA_Z,
+	BNO055_SCAN_GRAVITY_X,
+	BNO055_SCAN_GRAVITY_Y,
+	BNO055_SCAN_GRAVITY_Z,
+	BNO055_SCAN_TIMESTAMP,
+	_BNO055_SCAN_MAX
+};
+
+static const struct iio_chan_spec bno055_channels[] = {
+	/* accelerometer */
+	BNO055_CHANNEL(IIO_ACCEL, X, BNO055_SCAN_ACCEL_X,
+		       BNO055_ACC_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+	BNO055_CHANNEL(IIO_ACCEL, Y, BNO055_SCAN_ACCEL_Y,
+		       BNO055_ACC_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+	BNO055_CHANNEL(IIO_ACCEL, Z, BNO055_SCAN_ACCEL_Z,
+		       BNO055_ACC_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)),
+	/* gyroscope */
+	BNO055_CHANNEL(IIO_ANGL_VEL, X, BNO055_SCAN_GYRO_X,
+		       BNO055_GYR_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |
+		       BIT(IIO_CHAN_INFO_SCALE)),
+	BNO055_CHANNEL(IIO_ANGL_VEL, Y, BNO055_SCAN_GYRO_Y,
+		       BNO055_GYR_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |
+		       BIT(IIO_CHAN_INFO_SCALE)),
+	BNO055_CHANNEL(IIO_ANGL_VEL, Z, BNO055_SCAN_GYRO_Z,
+		       BNO055_GYR_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		       BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |
+		       BIT(IIO_CHAN_INFO_SCALE)),
+	/* magnetometer */
+	BNO055_CHANNEL(IIO_MAGN, X, BNO055_SCAN_MAGN_X,
+		       BNO055_MAG_DATA_X_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)),
+	BNO055_CHANNEL(IIO_MAGN, Y, BNO055_SCAN_MAGN_Y,
+		       BNO055_MAG_DATA_Y_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)),
+	BNO055_CHANNEL(IIO_MAGN, Z, BNO055_SCAN_MAGN_Z,
+		       BNO055_MAG_DATA_Z_LSB_REG, BIT(IIO_CHAN_INFO_OFFSET),
+		       BIT(IIO_CHAN_INFO_SAMP_FREQ), BIT(IIO_CHAN_INFO_SAMP_FREQ)),
+	/* euler angle */
+	BNO055_CHANNEL(IIO_ROT, YAW, BNO055_SCAN_YAW,
+		       BNO055_EUL_DATA_X_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ROT, ROLL, BNO055_SCAN_ROLL,
+		       BNO055_EUL_DATA_Y_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ROT, PITCH, BNO055_SCAN_PITCH,
+		       BNO055_EUL_DATA_Z_LSB_REG, 0, 0, 0),
+	/* quaternion */
+	BNO055_CHANNEL(IIO_ROT, QUATERNION, BNO055_SCAN_QUATERNION,
+		       BNO055_QUAT_DATA_W_LSB_REG, 0, 0, 0),
+
+	/* linear acceleration */
+	BNO055_CHANNEL(IIO_ACCEL, LINEAR_X, BNO055_SCAN_LIA_X,
+		       BNO055_LIA_DATA_X_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ACCEL, LINEAR_Y, BNO055_SCAN_LIA_Y,
+		       BNO055_LIA_DATA_Y_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_ACCEL, LINEAR_Z, BNO055_SCAN_LIA_Z,
+		       BNO055_LIA_DATA_Z_LSB_REG, 0, 0, 0),
+
+	/* gravity vector */
+	BNO055_CHANNEL(IIO_GRAVITY, X, BNO055_SCAN_GRAVITY_X,
+		       BNO055_GRAVITY_DATA_X_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_GRAVITY, Y, BNO055_SCAN_GRAVITY_Y,
+		       BNO055_GRAVITY_DATA_Y_LSB_REG, 0, 0, 0),
+	BNO055_CHANNEL(IIO_GRAVITY, Z, BNO055_SCAN_GRAVITY_Z,
+		       BNO055_GRAVITY_DATA_Z_LSB_REG, 0, 0, 0),
+
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.scan_index = -1,
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(BNO055_SCAN_TIMESTAMP),
+};
+
+static int bno055_get_regmask(struct bno055_priv *priv, int *val, int *val2,
+			      int reg, int mask, struct bno055_sysfs_attr *attr)
+{
+	const int shift = __ffs(mask);
+	int hwval, idx;
+	int ret;
+	int i;
+
+	ret = regmap_read(priv->regmap, reg, &hwval);
+	if (ret)
+		return ret;
+
+	idx = (hwval & mask) >> shift;
+	if (attr->hw_xlate)
+		for (i = 0; i < attr->len; i++)
+			if (attr->hw_xlate[i] == idx) {
+				idx = i;
+				break;
+			}
+	if (attr->type == IIO_VAL_INT) {
+		*val = attr->vals[idx];
+	} else { /* IIO_VAL_INT_PLUS_MICRO or IIO_VAL_FRACTIONAL */
+		*val = attr->vals[idx * 2];
+		*val2 = attr->vals[idx * 2 + 1];
+	}
+
+	return attr->type;
+}
+
+static int bno055_set_regmask(struct bno055_priv *priv, int val, int val2,
+			      int reg, int mask, struct bno055_sysfs_attr *attr)
+{
+	const int shift = __ffs(mask);
+	int best_delta;
+	int req_val;
+	int tbl_val;
+	bool first;
+	int delta;
+	int hwval;
+	int ret;
+	int len;
+	int i;
+
+	/*
+	 * The closest value the HW supports is only one in fusion mode,
+	 * and it is autoselected, so don't do anything, just return OK,
+	 * as the closest possible value has been (virtually) selected
+	 */
+	if (priv->operation_mode != BNO055_OPR_MODE_AMG)
+		return 0;
+
+	len = attr->len;
+
+	/*
+	 * We always get a request in INT_PLUS_MICRO, but we
+	 * take care of the micro part only when we really have
+	 * non-integer tables. This prevents 32-bit overflow with
+	 * larger integers contained in integer tables.
+	 */
+	req_val = val;
+	if (attr->type != IIO_VAL_INT) {
+		len /= 2;
+		req_val = min(val, 2147) * 1000000 + val2;
+	}
+
+	first = true;
+	for (i = 0; i < len; i++) {
+		switch (attr->type) {
+		case IIO_VAL_INT:
+			tbl_val = attr->vals[i];
+			break;
+		case IIO_VAL_INT_PLUS_MICRO:
+			WARN_ON(attr->vals[i * 2] > 2147);
+			tbl_val = attr->vals[i * 2] * 1000000 +
+				attr->vals[i * 2 + 1];
+			break;
+		case IIO_VAL_FRACTIONAL:
+			WARN_ON(attr->vals[i * 2] > 4294);
+			tbl_val = attr->vals[i * 2] * 1000000 /
+				attr->vals[i * 2 + 1];
+			break;
+		default:
+			return -EINVAL;
+		}
+		delta = abs(tbl_val - req_val);
+		if (delta < best_delta || first) {
+			best_delta = delta;
+			hwval = i;
+			first = false;
+		}
+	}
+
+	if (attr->hw_xlate)
+		hwval = attr->hw_xlate[hwval];
+
+	ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(priv->regmap, reg, mask, hwval << shift);
+	if (ret)
+		return ret;
+
+	return bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_AMG);
+}
+
+static int bno055_read_simple_chan(struct iio_dev *indio_dev,
+				   struct iio_chan_spec const *chan,
+				   int *val, int *val2, long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	__le16 raw_val;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = regmap_bulk_read(priv->regmap, chan->address,
+				       &raw_val, sizeof(raw_val));
+		if (ret < 0)
+			return ret;
+		*val = sign_extend32(le16_to_cpu(raw_val), 15);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_OFFSET:
+		if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+			*val = 0;
+		} else {
+			ret = regmap_bulk_read(priv->regmap,
+					       chan->address +
+					       BNO055_REG_OFFSET_ADDR,
+					       &raw_val, sizeof(raw_val));
+			if (ret < 0)
+				return ret;
+			/*
+			 * IMU reports sensor offests; IIO wants correction
+			 * offsets, thus we need the 'minus' here.
+			 */
+			*val = -sign_extend32(le16_to_cpu(raw_val), 15);
+		}
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1;
+		switch (chan->type) {
+		case IIO_GRAVITY:
+			/* Table 3-35: 1 m/s^2 = 100 LSB */
+		case IIO_ACCEL:
+			/* Table 3-17: 1 m/s^2 = 100 LSB */
+			*val2 = 100;
+			break;
+		case IIO_MAGN:
+			/*
+			 * Table 3-19: 1 uT = 16 LSB.  But we need
+			 * Gauss: 1G = 0.1 uT.
+			 */
+			*val2 = 160;
+			break;
+		case IIO_ANGL_VEL:
+			/*
+			 * Table 3-22: 1 Rps = 900 LSB
+			 * .. but this is not exactly true. See comment at the
+			 * beginning of this file.
+			 */
+			if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+				*val = bno055_gyr_scale.fusion_vals[0];
+				*val2 = bno055_gyr_scale.fusion_vals[1];
+				return IIO_VAL_FRACTIONAL;
+			}
+
+			return bno055_get_regmask(priv, val, val2,
+						  BNO055_GYR_CONFIG_REG,
+						  BNO055_GYR_CONFIG_RANGE_MASK,
+						  &bno055_gyr_scale);
+			break;
+		case IIO_ROT:
+			/* Table 3-28: 1 degree = 16 LSB */
+			*val2 = 16;
+			break;
+		default:
+			return -EINVAL;
+		}
+		return IIO_VAL_FRACTIONAL;
+
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (chan->type != IIO_MAGN)
+			return -EINVAL;
+
+		return bno055_get_regmask(priv, val, val2,
+					  BNO055_MAG_CONFIG_REG,
+					  BNO055_MAG_CONFIG_ODR_MASK,
+					  &bno055_mag_odr);
+
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			return bno055_get_regmask(priv, val, val2,
+						  BNO055_GYR_CONFIG_REG,
+						  BNO055_GYR_CONFIG_LPF_MASK,
+						  &bno055_gyr_lpf);
+		case IIO_ACCEL:
+			return bno055_get_regmask(priv, val, val2,
+						  BNO055_ACC_CONFIG_REG,
+						  BNO055_ACC_CONFIG_LPF_MASK,
+						  &bno055_acc_lpf);
+		default:
+			return -EINVAL;
+		}
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bno055_sysfs_attr_avail(struct bno055_priv *priv, struct bno055_sysfs_attr *attr,
+				   const int **vals, int *length)
+{
+	if (priv->operation_mode != BNO055_OPR_MODE_AMG) {
+		/* locked when fusion enabled */
+		*vals = attr->fusion_vals;
+		if (attr->type == IIO_VAL_INT)
+			*length = 1;
+		else
+			*length = 2; /* IIO_VAL_INT_PLUS_MICRO or IIO_VAL_FRACTIONAL*/
+	} else {
+		*vals = attr->vals;
+		*length = attr->len;
+	}
+
+	return attr->type;
+}
+
+static int bno055_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     const int **vals, int *type, int *length,
+			     long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*type = bno055_sysfs_attr_avail(priv, &bno055_gyr_scale,
+							vals, length);
+			return IIO_AVAIL_LIST;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*type = bno055_sysfs_attr_avail(priv, &bno055_gyr_lpf,
+							vals, length);
+			return IIO_AVAIL_LIST;
+		case IIO_ACCEL:
+			*type = bno055_sysfs_attr_avail(priv, &bno055_acc_lpf,
+							vals, length);
+			return IIO_AVAIL_LIST;
+		default:
+			return -EINVAL;
+		}
+
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		switch (chan->type) {
+		case IIO_MAGN:
+			*type = bno055_sysfs_attr_avail(priv, &bno055_mag_odr,
+							vals, length);
+			return IIO_AVAIL_LIST;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bno055_read_temp_chan(struct iio_dev *indio_dev, int *val)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	unsigned int raw_val;
+	int ret;
+
+	ret = regmap_read(priv->regmap, BNO055_TEMP_REG, &raw_val);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Tables 3-36 and 3-37: one byte of priv, signed, 1 LSB = 1C.
+	 * ABI wants milliC.
+	 */
+	*val = raw_val * 1000;
+
+	return IIO_VAL_INT;
+}
+
+static int bno055_read_quaternion(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan,
+				  int size, int *vals, int *val_len,
+				  long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	__le16 raw_vals[4];
+	int i, ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (size < 4)
+			return -EINVAL;
+		ret = regmap_bulk_read(priv->regmap,
+				       BNO055_QUAT_DATA_W_LSB_REG,
+				       raw_vals, sizeof(raw_vals));
+		if (ret < 0)
+			return ret;
+		for (i = 0; i < 4; i++)
+			vals[i] = sign_extend32(le16_to_cpu(raw_vals[i]), 15);
+		*val_len = 4;
+		return IIO_VAL_INT_MULTIPLE;
+	case IIO_CHAN_INFO_SCALE:
+		/* Table 3-31: 1 quaternion = 2^14 LSB */
+		if (size < 2)
+			return -EINVAL;
+		vals[0] = 1;
+		vals[1] = 14;
+		return IIO_VAL_FRACTIONAL_LOG2;
+	default:
+		return -EINVAL;
+	}
+}
+
+static bool bno055_is_chan_readable(struct iio_dev *indio_dev,
+				    struct iio_chan_spec const *chan)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+
+	if (priv->operation_mode != BNO055_OPR_MODE_AMG)
+		return true;
+
+	switch (chan->type) {
+	case IIO_GRAVITY:
+	case IIO_ROT:
+		return false;
+	case IIO_ACCEL:
+		if (chan->channel2 == IIO_MOD_LINEAR_X ||
+		    chan->channel2 == IIO_MOD_LINEAR_Y ||
+		    chan->channel2 == IIO_MOD_LINEAR_Z)
+			return false;
+		return true;
+	default:
+		return true;
+	}
+}
+
+static int _bno055_read_raw_multi(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan,
+				  int size, int *vals, int *val_len,
+				  long mask)
+{
+	if (!bno055_is_chan_readable(indio_dev, chan))
+		return -EBUSY;
+
+	switch (chan->type) {
+	case IIO_MAGN:
+	case IIO_ACCEL:
+	case IIO_ANGL_VEL:
+	case IIO_GRAVITY:
+		if (size < 2)
+			return -EINVAL;
+		*val_len = 2;
+		return bno055_read_simple_chan(indio_dev, chan,
+					       &vals[0], &vals[1],
+					       mask);
+	case IIO_TEMP:
+		*val_len = 1;
+		return bno055_read_temp_chan(indio_dev, &vals[0]);
+	case IIO_ROT:
+		/*
+		 * Rotation is exposed as either a quaternion or three
+		 * Euler angles.
+		 */
+		if (chan->channel2 == IIO_MOD_QUATERNION)
+			return bno055_read_quaternion(indio_dev, chan,
+						      size, vals,
+						      val_len, mask);
+		if (size < 2)
+			return -EINVAL;
+		*val_len = 2;
+		return bno055_read_simple_chan(indio_dev, chan,
+					       &vals[0], &vals[1],
+					       mask);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bno055_read_raw_multi(struct iio_dev *indio_dev,
+				 struct iio_chan_spec const *chan,
+				 int size, int *vals, int *val_len,
+				 long mask)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = _bno055_read_raw_multi(indio_dev, chan, size,
+				     vals, val_len, mask);
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int _bno055_write_raw(struct iio_dev *iio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val, int val2, long mask)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+
+	switch (chan->type) {
+	case IIO_MAGN:
+		switch (mask) {
+		case IIO_CHAN_INFO_SAMP_FREQ:
+			return bno055_set_regmask(priv, val, val2,
+						  BNO055_MAG_CONFIG_REG,
+						  BNO055_MAG_CONFIG_ODR_MASK,
+						  &bno055_mag_odr);
+		default:
+			return -EINVAL;
+		}
+	case IIO_ACCEL:
+		switch (mask) {
+		case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+			return bno055_set_regmask(priv, val, val2,
+						  BNO055_ACC_CONFIG_REG,
+						  BNO055_ACC_CONFIG_LPF_MASK,
+						  &bno055_acc_lpf);
+
+		default:
+			return -EINVAL;
+		}
+	case IIO_ANGL_VEL:
+		switch (mask) {
+		case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+			return bno055_set_regmask(priv, val, val2,
+						  BNO055_GYR_CONFIG_REG,
+						  BNO055_GYR_CONFIG_LPF_MASK,
+						  &bno055_gyr_lpf);
+		case IIO_CHAN_INFO_SCALE:
+			return bno055_set_regmask(priv, val, val2,
+						  BNO055_GYR_CONFIG_REG,
+						  BNO055_GYR_CONFIG_RANGE_MASK,
+						  &bno055_gyr_scale);
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bno055_write_raw(struct iio_dev *iio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+	int ret;
+
+	mutex_lock(&priv->lock);
+	ret = _bno055_write_raw(iio_dev, chan, val, val2, mask);
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static ssize_t in_accel_range_raw_available_show(struct device *dev,
+						 struct device_attribute *attr,
+						 char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	int len = 0;
+	int i;
+
+	if (priv->operation_mode != BNO055_OPR_MODE_AMG)
+		return sysfs_emit(buf, "%d\n", bno055_acc_range.fusion_vals[0]);
+
+	for (i = 0; i < bno055_acc_range.len; i++)
+		len += sysfs_emit_at(buf, len, "%d ", bno055_acc_range.vals[i]);
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t bno055_fusion_enable_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+	return sysfs_emit(buf, "%d\n",
+			  priv->operation_mode != BNO055_OPR_MODE_AMG);
+}
+
+static ssize_t bno055_fusion_enable_store(struct device *dev,
+					  struct device_attribute *attr,
+					  const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	bool en;
+
+	if (indio_dev->active_scan_mask &&
+	    !bitmap_empty(indio_dev->active_scan_mask, _BNO055_SCAN_MAX))
+		return -EBUSY;
+
+	if (kstrtobool(buf, &en))
+		return -EINVAL;
+
+	if (!en)
+		return bno055_operation_mode_set(priv, BNO055_OPR_MODE_AMG) ?: len;
+
+	/*
+	 * Coming from AMG means the FMC was off, just switch to fusion but
+	 * don't change anything that doesn't belong to us (i.e let FMC stay off).
+	 * Coming from any other fusion mode means we don't need to do anything.
+	 */
+	if (priv->operation_mode == BNO055_OPR_MODE_AMG)
+		return  bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION_FMC_OFF) ?: len;
+
+	return len;
+}
+
+static ssize_t bno055_fmc_enable_show(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+	return sysfs_emit(buf, "%d\n",
+			  priv->operation_mode == BNO055_OPR_MODE_FUSION);
+}
+
+static ssize_t bno055_fmc_enable_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	int ret;
+
+	if (indio_dev->active_scan_mask &&
+	    !bitmap_empty(indio_dev->active_scan_mask, _BNO055_SCAN_MAX))
+		return -EBUSY;
+
+	if (sysfs_streq(buf, "0")) {
+		if (priv->operation_mode == BNO055_OPR_MODE_FUSION) {
+			ret = bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION_FMC_OFF);
+			if (ret)
+				return ret;
+		}
+	} else {
+		if (priv->operation_mode == BNO055_OPR_MODE_AMG)
+			return -EINVAL;
+
+		if (priv->operation_mode != BNO055_OPR_MODE_FUSION) {
+			ret = bno055_operation_mode_set(priv, BNO055_OPR_MODE_FUSION);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return len;
+}
+
+static ssize_t bno055_in_accel_range_show(struct device *dev,
+					  struct device_attribute *attr,
+					  char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	int val;
+	int ret;
+
+	ret = bno055_get_regmask(priv, &val, NULL,
+				 BNO055_ACC_CONFIG_REG,
+				 BNO055_ACC_CONFIG_RANGE_MASK,
+				 &bno055_acc_range);
+	if (ret < 0)
+		return ret;
+
+	return sysfs_emit(buf, "%d\n", val);
+}
+
+static ssize_t bno055_in_accel_range_store(struct device *dev,
+					   struct device_attribute *attr,
+					   const char *buf, size_t len)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	mutex_lock(&priv->lock);
+	ret = bno055_set_regmask(priv, val, 0,
+				 BNO055_ACC_CONFIG_REG,
+				 BNO055_ACC_CONFIG_RANGE_MASK,
+				 &bno055_acc_range);
+	mutex_unlock(&priv->lock);
+
+	return ret ?: len;
+}
+
+static ssize_t bno055_get_calib_status(struct device *dev, char *buf, int which)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+	int calib;
+	int ret;
+	int val;
+
+	if (priv->operation_mode == BNO055_OPR_MODE_AMG ||
+	    (priv->operation_mode == BNO055_OPR_MODE_FUSION_FMC_OFF &&
+	     which == BNO055_CALIB_STAT_MAGN_SHIFT)) {
+		calib = 0;
+	} else {
+		mutex_lock(&priv->lock);
+		ret = regmap_read(priv->regmap, BNO055_CALIB_STAT_REG, &val);
+		mutex_unlock(&priv->lock);
+
+		if (ret)
+			return -EIO;
+
+		calib = ((val >> which) & BNO055_CALIB_STAT_MASK) + 1;
+	}
+
+	return sysfs_emit(buf, "%d\n", calib);
+}
+
+static ssize_t serialnumber_show(struct device *dev,
+				 struct device_attribute *attr,
+				 char *buf)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(dev));
+
+	return sysfs_emit(buf, "%*ph\n", BNO055_UID_LEN, priv->uid);
+}
+
+static ssize_t calibration_data_read(struct file *filp, struct kobject *kobj,
+				     struct bin_attribute *bin_attr, char *buf,
+				     loff_t pos, size_t count)
+{
+	struct bno055_priv *priv = iio_priv(dev_to_iio_dev(kobj_to_dev(kobj)));
+	u8 data[BNO055_CALDATA_LEN];
+	int ret;
+
+	/*
+	 * Calibration data is volatile; reading it in chunks will possibly
+	 * results in inconsistent data. We require the user to read the whole
+	 * blob in a single chunk
+	 */
+	if (count < BNO055_CALDATA_LEN || pos)
+		return -EINVAL;
+
+	mutex_lock(&priv->lock);
+	ret = bno055_operation_mode_do_set(priv, BNO055_OPR_MODE_CONFIG);
+	if (ret)
+		goto exit_unlock;
+
+	ret = regmap_bulk_read(priv->regmap, BNO055_CALDATA_START, data,
+			       BNO055_CALDATA_LEN);
+	if (ret)
+		goto exit_unlock;
+
+	ret = bno055_operation_mode_do_set(priv, priv->operation_mode);
+	if (ret)
+		goto exit_unlock;
+
+	memcpy(buf, data, BNO055_CALDATA_LEN);
+
+	ret = BNO055_CALDATA_LEN;
+exit_unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static ssize_t sys_calibration_auto_status_show(struct device *dev,
+						struct device_attribute *a,
+						char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_SYS_SHIFT);
+}
+
+static ssize_t in_accel_calibration_auto_status_show(struct device *dev,
+						     struct device_attribute *a,
+						     char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_ACCEL_SHIFT);
+}
+
+static ssize_t in_gyro_calibration_auto_status_show(struct device *dev,
+						    struct device_attribute *a,
+						    char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_GYRO_SHIFT);
+}
+
+static ssize_t in_magn_calibration_auto_status_show(struct device *dev,
+						    struct device_attribute *a,
+						    char *buf)
+{
+	return bno055_get_calib_status(dev, buf, BNO055_CALIB_STAT_MAGN_SHIFT);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int bno055_debugfs_reg_access(struct iio_dev *iio_dev, unsigned int reg,
+				     unsigned int writeval, unsigned int *readval)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+
+	if (readval)
+		return regmap_read(priv->regmap, reg, readval);
+	else
+		return regmap_write(priv->regmap, reg, writeval);
+}
+
+static ssize_t bno055_show_fw_version(struct file *file, char __user *userbuf,
+				      size_t count, loff_t *ppos)
+{
+	struct bno055_priv *priv = file->private_data;
+	int rev, ver;
+	char *buf;
+	int ret;
+
+	ret = regmap_read(priv->regmap, BNO055_SW_REV_LSB_REG, &rev);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(priv->regmap, BNO055_SW_REV_MSB_REG, &ver);
+	if (ret)
+		return ret;
+
+	buf = kasprintf(GFP_KERNEL, "ver: 0x%x, rev: 0x%x\n", ver, rev);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
+	kfree(buf);
+
+	return ret;
+}
+
+static const struct file_operations bno055_fw_version_ops = {
+	.open = simple_open,
+	.read = bno055_show_fw_version,
+	.llseek = default_llseek,
+	.owner = THIS_MODULE,
+};
+
+static void bno055_debugfs_remove(void *debugfs)
+{
+	debugfs_remove((struct dentry *)debugfs);
+}
+
+static void bno055_debugfs_init(struct iio_dev *iio_dev)
+{
+	struct bno055_priv *priv = iio_priv(iio_dev);
+
+	priv->debugfs = debugfs_create_file("firmware_version", 0400,
+					    iio_get_debugfs_dentry(iio_dev),
+					    priv, &bno055_fw_version_ops);
+
+	devm_add_action_or_reset(priv->dev, bno055_debugfs_remove, priv->debugfs);
+}
+#else
+static void bno055_debugfs_init(struct iio_dev *iio_dev)
+{
+}
+
+static int bno055_debugfs_reg_access(struct iio_dev *iio_dev, unsigned int reg,
+				     unsigned int writeval, unsigned int *readval)
+{
+	return 0;
+}
+#endif
+
+static IIO_DEVICE_ATTR(fusion_enable, 0644,
+		       bno055_fusion_enable_show,
+		       bno055_fusion_enable_store, 0);
+
+static IIO_DEVICE_ATTR(in_magn_calibration_fast_enable, 0644,
+		       bno055_fmc_enable_show,
+		       bno055_fmc_enable_store, 0);
+
+static IIO_DEVICE_ATTR(in_accel_range_raw, 0644,
+		       bno055_in_accel_range_show,
+		       bno055_in_accel_range_store, 0);
+
+static IIO_DEVICE_ATTR_RO(in_accel_range_raw_available, 0);
+
+static IIO_DEVICE_ATTR_RO(sys_calibration_auto_status, 0);
+static IIO_DEVICE_ATTR_RO(in_accel_calibration_auto_status, 0);
+static IIO_DEVICE_ATTR_RO(in_gyro_calibration_auto_status, 0);
+static IIO_DEVICE_ATTR_RO(in_magn_calibration_auto_status, 0);
+
+static IIO_DEVICE_ATTR_RO(serialnumber, 0);
+
+static struct attribute *bno055_attrs[] = {
+	&iio_dev_attr_in_accel_range_raw_available.dev_attr.attr,
+	&iio_dev_attr_in_accel_range_raw.dev_attr.attr,
+	&iio_dev_attr_fusion_enable.dev_attr.attr,
+	&iio_dev_attr_in_magn_calibration_fast_enable.dev_attr.attr,
+	&iio_dev_attr_sys_calibration_auto_status.dev_attr.attr,
+	&iio_dev_attr_in_accel_calibration_auto_status.dev_attr.attr,
+	&iio_dev_attr_in_gyro_calibration_auto_status.dev_attr.attr,
+	&iio_dev_attr_in_magn_calibration_auto_status.dev_attr.attr,
+	&iio_dev_attr_serialnumber.dev_attr.attr,
+	NULL
+};
+
+static BIN_ATTR_RO(calibration_data, BNO055_CALDATA_LEN);
+
+static struct bin_attribute *bno055_bin_attrs[] = {
+	&bin_attr_calibration_data,
+	NULL
+};
+
+static const struct attribute_group bno055_attrs_group = {
+	.attrs = bno055_attrs,
+	.bin_attrs = bno055_bin_attrs,
+};
+
+static const struct iio_info bno055_info = {
+	.read_raw_multi = bno055_read_raw_multi,
+	.read_avail = bno055_read_avail,
+	.write_raw = bno055_write_raw,
+	.attrs = &bno055_attrs_group,
+	.debugfs_reg_access = bno055_debugfs_reg_access,
+};
+
+/*
+ * Reads len samples from the HW, stores them in buf starting from buf_idx,
+ * and applies mask to cull (skip) unneeded samples.
+ * Updates buf_idx incrementing with the number of stored samples.
+ * Samples from HW are transferred into buf, then in-place copy on buf is
+ * performed in order to cull samples that need to be skipped.
+ * This avoids copies of the first samples until we hit the 1st sample to skip,
+ * and also avoids having an extra bounce buffer.
+ * buf must be able to contain len elements in spite of how many samples we are
+ * going to cull.
+ */
+static int bno055_scan_xfer(struct bno055_priv *priv,
+			    int start_ch, int len, unsigned long mask,
+			    __le16 *buf, int *buf_idx)
+{
+	const int base = BNO055_ACC_DATA_X_LSB_REG;
+	bool quat_in_read = false;
+	int buf_base = *buf_idx;
+	__le16 *dst, *src;
+	int offs_fixup = 0;
+	int xfer_len = len;
+	int ret;
+	int i, n;
+
+	if (!mask)
+		return 0;
+
+	/*
+	 * All chans are made up 1 16-bit sample, except for quaternion that is
+	 * made up 4 16-bit values.
+	 * For us the quaternion CH is just like 4 regular CHs.
+	 * If our read starts past the quaternion make sure to adjust the
+	 * starting offset; if the quaternion is contained in our scan then make
+	 * sure to adjust the read len.
+	 */
+	if (start_ch > BNO055_SCAN_QUATERNION) {
+		start_ch += 3;
+	} else if ((start_ch <= BNO055_SCAN_QUATERNION) &&
+		 ((start_ch + len) > BNO055_SCAN_QUATERNION)) {
+		quat_in_read = true;
+		xfer_len += 3;
+	}
+
+	ret = regmap_bulk_read(priv->regmap,
+			       base + start_ch * sizeof(__le16),
+			       buf + buf_base,
+			       xfer_len * sizeof(__le16));
+	if (ret)
+		return ret;
+
+	for_each_set_bit(i, &mask, len) {
+		if (quat_in_read && ((start_ch + i) > BNO055_SCAN_QUATERNION))
+			offs_fixup = 3;
+
+		dst = buf + *buf_idx;
+		src = buf + buf_base + offs_fixup + i;
+
+		n = (start_ch + i == BNO055_SCAN_QUATERNION) ? 4 : 1;
+
+		if (dst != src)
+			memcpy(dst, src, n * sizeof(__le16));
+
+		*buf_idx += n;
+	}
+	return 0;
+}
+
+static irqreturn_t bno055_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *iio_dev = pf->indio_dev;
+	struct bno055_priv *priv = iio_priv(iio_dev);
+	int xfer_start, start, end, prev_end;
+	unsigned long mask;
+	int quat_extra_len;
+	bool first = true;
+	int buf_idx = 0;
+	bool thr_hit;
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	/*
+	 * Walk the bitmap and eventually perform several transfers.
+	 * Bitmap ones-fields that are separated by gaps <= xfer_burst_break_thr
+	 * will be included in same transfer.
+	 * Every time the bitmap contains a gap wider than xfer_burst_break_thr
+	 * then we split the transfer, skipping the gap.
+	 */
+	for_each_set_bitrange(start, end, iio_dev->active_scan_mask,
+			      iio_dev->masklength) {
+		/*
+		 * First transfer will start from the beginning of the first
+		 * ones-field in the bitmap
+		 */
+		if (first) {
+			xfer_start = start;
+		} else {
+			/*
+			 * We found the next ones-field; check whether to
+			 * include it in * the current transfer or not (i.e.
+			 * let's perform the current * transfer and prepare for
+			 * another one).
+			 */
+
+			/*
+			 * In case the zeros-gap contains the quaternion bit,
+			 * then its length is actually 4 words instead of 1
+			 * (i.e. +3 wrt other channels).
+			 */
+			quat_extra_len = ((start > BNO055_SCAN_QUATERNION) &&
+					  (prev_end <= BNO055_SCAN_QUATERNION)) ? 3 : 0;
+
+			/* If the gap is wider than xfer_burst_break_thr then.. */
+			thr_hit = (start - prev_end + quat_extra_len) >
+				priv->xfer_burst_break_thr;
+
+			/*
+			 * .. transfer all the data up to the gap. Then set the
+			 * next transfer start index at right after the gap
+			 * (i.e. at the start of this ones-field).
+			 */
+			if (thr_hit) {
+				mask = *iio_dev->active_scan_mask >> xfer_start;
+				ret = bno055_scan_xfer(priv, xfer_start,
+						       prev_end - xfer_start,
+						       mask, priv->buf.chans, &buf_idx);
+				if (ret)
+					goto done;
+				xfer_start = start;
+			}
+		}
+		first = false;
+		prev_end = end;
+	}
+
+	/*
+	 * We finished walking the bitmap; no more gaps to check for. Just
+	 * perform the current transfer.
+	 */
+	mask = *iio_dev->active_scan_mask >> xfer_start;
+	ret = bno055_scan_xfer(priv, xfer_start,
+			       prev_end - xfer_start,
+			       mask, priv->buf.chans, &buf_idx);
+
+	iio_push_to_buffers_with_timestamp(iio_dev, &priv->buf, pf->timestamp);
+done:
+	mutex_unlock(&priv->lock);
+	iio_trigger_notify_done(iio_dev->trig);
+	return IRQ_HANDLED;
+}
+
+static int bno055_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct bno055_priv *priv = iio_priv(indio_dev);
+	const unsigned long fusion_mask =
+		BIT(BNO055_SCAN_YAW) |
+		BIT(BNO055_SCAN_ROLL) |
+		BIT(BNO055_SCAN_PITCH) |
+		BIT(BNO055_SCAN_QUATERNION) |
+		BIT(BNO055_SCAN_LIA_X) |
+		BIT(BNO055_SCAN_LIA_Y) |
+		BIT(BNO055_SCAN_LIA_Z) |
+		BIT(BNO055_SCAN_GRAVITY_X) |
+		BIT(BNO055_SCAN_GRAVITY_Y) |
+		BIT(BNO055_SCAN_GRAVITY_Z);
+
+	if (priv->operation_mode == BNO055_OPR_MODE_AMG &&
+	    bitmap_intersects(indio_dev->active_scan_mask, &fusion_mask,
+			      _BNO055_SCAN_MAX))
+		return -EBUSY;
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops bno055_buffer_setup_ops = {
+	.preenable = bno055_buffer_preenable,
+};
+
+static void bno055_clk_disable(void *arg)
+{
+	clk_disable_unprepare(arg);
+}
+
+int bno055_probe(struct device *dev, struct regmap *regmap,
+		 int xfer_burst_break_thr, bool sw_reset)
+{
+	const struct firmware *caldata = NULL;
+	struct bno055_priv *priv;
+	struct iio_dev *iio_dev;
+	char *fw_name_buf;
+	unsigned int val;
+	int rev, ver;
+	int ret;
+
+	iio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
+	if (!iio_dev)
+		return -ENOMEM;
+
+	iio_dev->name = "bno055";
+	priv = iio_priv(iio_dev);
+	mutex_init(&priv->lock);
+	priv->regmap = regmap;
+	priv->dev = dev;
+	priv->xfer_burst_break_thr = xfer_burst_break_thr;
+	priv->sw_reset = sw_reset;
+
+	priv->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(priv->reset_gpio), "Failed to get reset GPIO\n");
+
+	priv->clk = devm_clk_get_optional(dev, "clk");
+	if (IS_ERR(priv->clk))
+		return dev_err_probe(dev, PTR_ERR(priv->clk), "Failed to get CLK\n");
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, bno055_clk_disable, priv->clk);
+	if (ret)
+		return ret;
+
+	if (priv->reset_gpio) {
+		usleep_range(5000, 10000);
+		gpiod_set_value_cansleep(priv->reset_gpio, 1);
+		usleep_range(650000, 750000);
+	} else if (!sw_reset) {
+		dev_warn(dev, "No usable reset method; IMU may be unreliable\n");
+	}
+
+	ret = regmap_read(priv->regmap, BNO055_CHIP_ID_REG, &val);
+	if (ret)
+		return ret;
+
+	if (val != BNO055_CHIP_ID_MAGIC)
+		dev_warn(dev, "Unrecognized chip ID 0x%x\n", val);
+
+	/*
+	 * In case we haven't a HW reset pin, we can still reset the chip via
+	 * register write. This is probably nonsense in case we can't even
+	 * communicate with the chip or the chip isn't the one we expect (i.e.
+	 * we don't write to unknown chips), so we perform SW reset only after
+	 * chip magic ID check
+	 */
+	if (!priv->reset_gpio) {
+		ret = bno055_system_reset(priv);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_read(priv->regmap, BNO055_SW_REV_LSB_REG, &rev);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(priv->regmap, BNO055_SW_REV_MSB_REG, &ver);
+	if (ret)
+		return ret;
+
+	/*
+	 * The stock FW version contains a bug (see comment at the beginning of
+	 * this file) that causes the anglvel scale to be changed depending on
+	 * the chip range setting. We workaround this, but we don't know what
+	 * other FW versions might do.
+	 */
+	if (ver != 0x3 || rev != 0x11)
+		dev_warn(dev, "Untested firmware version. Anglvel scale may not work as expected\n");
+
+	ret = regmap_bulk_read(priv->regmap, BNO055_UID_LOWER_REG,
+			       priv->uid, BNO055_UID_LEN);
+	if (ret)
+		return ret;
+
+	/* Sensor calibration data */
+	fw_name_buf = kasprintf(GFP_KERNEL,
+				BNO055_FW_UID_FMT,
+				BNO055_UID_LEN, priv->uid);
+	if (!fw_name_buf)
+		return -ENOMEM;
+
+	ret = request_firmware(&caldata, fw_name_buf, dev);
+	kfree(fw_name_buf);
+	if (ret)
+		ret = request_firmware(&caldata, BNO055_FW_GENERIC_NAME, dev);
+	if (ret) {
+		dev_notice(dev, "Calibration file load failed. See instruction in kernel Documentation/iio/bno055.rst\n");
+		ret = bno055_init(priv, NULL, 0);
+	} else {
+		ret = bno055_init(priv, caldata->data, caldata->size);
+		release_firmware(caldata);
+	}
+	if (ret)
+		return ret;
+
+	priv->operation_mode = BNO055_OPR_MODE_FUSION;
+	ret = bno055_operation_mode_do_set(priv, priv->operation_mode);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, bno055_uninit, priv);
+	if (ret)
+		return ret;
+
+	iio_dev->channels = bno055_channels;
+	iio_dev->num_channels = ARRAY_SIZE(bno055_channels);
+	iio_dev->info = &bno055_info;
+	iio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = devm_iio_triggered_buffer_setup(dev, iio_dev,
+					      iio_pollfunc_store_time,
+					      bno055_trigger_handler,
+					      &bno055_buffer_setup_ops);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_device_register(dev, iio_dev);
+	if (ret)
+		return ret;
+
+	bno055_debugfs_init(iio_dev);
+
+	return 0;
+}
+EXPORT_SYMBOL_NS_GPL(bno055_probe, IIO_BNO055);
+
+MODULE_AUTHOR("Andrea Merello <andrea.merello@iit.it>");
+MODULE_DESCRIPTION("Bosch BNO055 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/imu/bno055/bno055.h b/drivers/iio/imu/bno055/bno055.h
new file mode 100644
index 000000000000..64f9fc95cebc
--- /dev/null
+++ b/drivers/iio/imu/bno055/bno055.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#ifndef __BNO055_H__
+#define __BNO055_H__
+
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+struct device;
+int bno055_probe(struct device *dev, struct regmap *regmap,
+		 int xfer_burst_break_thr, bool sw_reset);
+extern const struct regmap_config bno055_regmap_config;
+
+#endif
