From patchwork Sat May 14 14:10:40 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Baryshkov X-Patchwork-Id: 572868 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D01ADC433F5 for ; Sat, 14 May 2022 14:11:53 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232932AbiENOLw (ORCPT ); Sat, 14 May 2022 10:11:52 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:45992 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233022AbiENOKy (ORCPT ); Sat, 14 May 2022 10:10:54 -0400 Received: from mail-lf1-x12f.google.com (mail-lf1-x12f.google.com [IPv6:2a00:1450:4864:20::12f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 053DA140EE for ; Sat, 14 May 2022 07:10:52 -0700 (PDT) Received: by mail-lf1-x12f.google.com with SMTP id bu29so19031221lfb.0 for ; Sat, 14 May 2022 07:10:51 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=46r719QrYD+yeahkibqMiIaabzp3BMz1d70Fz9J9U2g=; b=jrZwq3Ertdw0V6DeJjkwz8Mwsz6e1icMsGzgjUpG1a4LFU1qOC1ll9YBmiJWrO97/4 FufQMPB74IZVYi009iu7K9ERBWKYJoPUgtycKjJHYV3ROcFbPYzH1c27b1ma7OP91+Vv 1Q7nRvSWDUJyNhKMZ+bpnd9CLUohZeqQ51HorNr+0+f+qvMSvey8lcpRQdtWxwqQxZpe JsI1fE9NY0s2bK+tTCZsX5iLEZKidUuzcTrDO7pL/nhN333TvVi/OBFgNmCz4RyrGf5i DiUNgxqmfmDjTcF2zLvk0Ju0JoZoaxKZ/yNBo3ICD9rOV6S6JNXo4zw+rVRRmjFjQMpf pWVA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=46r719QrYD+yeahkibqMiIaabzp3BMz1d70Fz9J9U2g=; b=S8f4ZyXSkzyf75wt/BMNVf9HhwtIhqTacuXHCQNedi/T2THalNNrHPH88E/Lv2l4iK f2d4r6JZBaojAB7bPsIqCBWO7Tu1oTyOclgx4ixAmyDDR1JBYQYbkdE6MWDVYUUMDubW aRuEL3+IDTclpGJsPeSxdO07Q8IwZ+mpg62+EfQwlOhG+KQyzBMpT/IaKb2omMGDmtal S7wMIBPwE594VPJo8GXzsAWYTspNES2aaeS0Kwj101MkYcq0R2CpQwvtxNoixNvutUF1 ux6DEAjWn4TQpgMAWLsA/OtPAF+YjtiIYqs/O7hLvUrcjnZSrSsQpWgSxcAFRpOrOt3d /EWg== X-Gm-Message-State: AOAM533OsZCBuhKus3LfNcqaNSor6pKF+u8mz/i9TSzttE5rDh2PnonA VWIBQZPsDLj9kTld9SO+MlN1xdIo4Wt4Vw== X-Google-Smtp-Source: ABdhPJwpunM8dLVBVizum62/Nayz4/GDrPmzUpKyNE6P6oYSyqgCVS+zJMexfzJJKJthAJPkKqMqTg== X-Received: by 2002:ac2:5601:0:b0:472:11a6:8287 with SMTP id v1-20020ac25601000000b0047211a68287mr6846039lfd.440.1652537451497; Sat, 14 May 2022 07:10:51 -0700 (PDT) Received: from eriador.lan ([37.153.55.125]) by smtp.gmail.com with ESMTPSA id x9-20020a05651c104900b0024f3d1daedasm845912ljm.98.2022.05.14.07.10.50 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sat, 14 May 2022 07:10:50 -0700 (PDT) From: Dmitry Baryshkov To: Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski , Konrad Dybcio , Marijn Suijten Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH v4 11/12] arm64: dts: qcom: sdm660: Add initial Inforce IFC6560 board support Date: Sat, 14 May 2022 17:10:40 +0300 Message-Id: <20220514141041.3158521-12-dmitry.baryshkov@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220514141041.3158521-1-dmitry.baryshkov@linaro.org> References: <20220514141041.3158521-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The IFC6560 is a board from Inforce Computing, built around the SDA660 SoC. This patch describes core clocks, some regulators from the two PMICs, debug uart, storage, bluetooth and audio DSP remoteproc. The regulator settings are inherited from prior work by Konrad Dybcio and AngeloGioacchino Del Regno. Co-developed-by: Bjorn Andersson Signed-off-by: Dmitry Baryshkov --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sda660-inforce-ifc6560.dts | 471 ++++++++++++++++++ 2 files changed, 472 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index f9e6343acd03..5f717fe0e8d0 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -88,6 +88,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd.dtb +dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb diff --git a/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts new file mode 100644 index 000000000000..d1923c1310f6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts @@ -0,0 +1,471 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Linaro Ltd. + * Copyright (c) 2020, Konrad Dybcio + * Copyright (c) 2020, AngeloGioacchino Del Regno + * + */ + +/dts-v1/; + +#include "sdm660.dtsi" +#include "pm660.dtsi" +#include "pm660l.dtsi" + +/ { + model = "Inforce 6560 Single Board Computer"; + compatible = "inforce,ifc6560", "qcom,sda660"; + chassis-type = "embedded"; /* SBC */ + + aliases { + serial0 = &blsp1_uart2; + serial1 = &blsp2_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + volup { + label = "Volume Up"; + gpios = <&pm660l_gpios 7 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + }; + }; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 58 GPIO_ACTIVE_HIGH>; + }; + + hdmi-out { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con: endpoint { + remote-endpoint = <&adv7533_out>; + }; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + + regulator-always-on; + regulator-boot-on; + }; + + v3p3_bck_bst: v3p3-bck-bst-regulator { + compatible = "regulator-fixed"; + regulator-name = "v3p3_bck_bst"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&vph_pwr>; + }; + + v1p2_ldo: v1p2-ldo-regulator { + compatible = "regulator-fixed"; + regulator-name = "v1p2_ldo"; + + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + vin-supply = <&vph_pwr>; + }; + + v5p0_boost: v5p0-boost-regulator { + compatible = "regulator-fixed"; + regulator-name = "v5p0_boost"; + + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&vph_pwr>; + }; +}; + +&adsp_pil { + firmware-name = "qcom/ifc6560/adsp.mbn"; +}; + +&blsp1_dma { + /* + * The board will lock up if we toggle the BLSP clock, unless the + * BAM DMA interconnects support is in place. + */ + /delete-property/ clocks; +}; + +&blsp_i2c6 { + status = "okay"; + + adv7533: hdmi@39 { + compatible = "adi,adv7535"; + reg = <0x39>, <0x66>; + reg-names = "main", "edid"; + + interrupt-parent = <&pm660l_gpios>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + + clocks = <&rpmcc RPM_SMD_BB_CLK2>; + clock-names = "cec"; + /* + * Limit to 3 lanes to prevent the bridge from changing amount + * of lanes in the fly. MSM DSI host doesn't like that. + */ + adi,dsi-lanes = <3>; + avdd-supply = <&vreg_l13a_1p8>; + dvdd-supply = <&vreg_l13a_1p8>; + pvdd-supply = <&vreg_l13a_1p8>; + a2vdd-supply = <&vreg_l13a_1p8>; + v3p3-supply = <&v3p3_bck_bst>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + adv7533_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + + adv7533_out: endpoint { + remote-endpoint = <&hdmi_con>; + }; + }; + }; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&blsp2_dma { + /* + * The board will lock up if we toggle the BLSP clock, unless the + * BAM DMA interconnects support is in place. + */ + /delete-property/ clocks; +}; + +&blsp2_uart1 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_l13a_1p8>; + vddxo-supply = <&vreg_l9a_1p8>; + vddrf-supply = <&vreg_l6a_1p3>; + vddch0-supply = <&vreg_l19a_3p3>; + max-speed = <3200000>; + }; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vreg_l1a_1p225>; +}; + +&dsi0_out { + remote-endpoint = <&adv7533_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + vcca-supply = <&vreg_l1b_0p925>; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mmss_smmu { + status = "okay"; +}; + +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = ; +}; + +&qusb2phy0 { + status = "okay"; + + vdd-supply = <&vreg_l1b_0p925>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; +}; + +&qusb2phy1 { + status = "okay"; + + vdd-supply = <&vreg_l1b_0p925>; + vdda-phy-dpdm-supply = <&vreg_l7b_3p125>; +}; + +&rpm_requests { + pm660-regulators { + compatible = "qcom,rpm-pm660-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l6_l7-supply = <&vreg_s5a_1p35>; + vdd_l2_l3-supply = <&vreg_s2b_1p05>; + vdd_l5-supply = <&vreg_s2b_1p05>; + vdd_l8_l9_l10_l11_l12_l13_l14-supply = <&vreg_s4a_2p04>; + vdd_l15_l16_l17_l18_l19-supply = <&vreg_bob>; + + vreg_s4a_2p04: s4 { + regulator-min-microvolt = <1805000>; + regulator-max-microvolt = <2040000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + regulator-always-on; + }; + + vreg_s5a_1p35: s5 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1350000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + vreg_l1a_1p225: l1 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1250000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l6a_1p3: l6 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1368000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l8a_1p8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-system-load = <325000>; + regulator-allow-set-load; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1804000>; + regulator-max-microvolt = <1896000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l13a_1p8: l13 { + /* This gives power to the LPDDR4: never turn it off! */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1944000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-always-on; + regulator-boot-on; + }; + + vreg_l19a_3p3: l19 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + }; + + pm660l-regulators { + compatible = "qcom,rpm-pm660l-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + + vdd_l1_l9_l10-supply = <&vreg_s2b_1p05>; + vdd_l2-supply = <&vreg_bob>; + vdd_l3_l5_l7_l8-supply = <&vreg_bob>; + vdd_l4_l6-supply = <&vreg_bob>; + vdd_bob-supply = <&vph_pwr>; + + vreg_s2b_1p05: s2 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-enable-ramp-delay = <200>; + regulator-ramp-delay = <0>; + }; + + vreg_l1b_0p925: l1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <925000>; + regulator-enable-ramp-delay = <250>; + regulator-allow-set-load; + }; + + vreg_l2b_2p95: l2 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l4b_2p95: l4 { + regulator-min-microvolt = <2944000>; + regulator-max-microvolt = <2952000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + + regulator-min-microamp = <200>; + regulator-max-microamp = <600000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + /* + * Downstream specifies a range of 1721-3600mV, + * but the only assigned consumers are SDHCI2 VMMC + * and Coresight QPDI that both request pinned 2.95V. + * Tighten the range to 1.8-3.328 (closest to 3.3) to + * make the mmc driver happy. + */ + vreg_l5b_2p95: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3328000>; + regulator-enable-ramp-delay = <250>; + regulator-system-load = <800000>; + regulator-ramp-delay = <0>; + regulator-allow-set-load; + }; + + vreg_l7b_3p125: l7 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3125000>; + regulator-enable-ramp-delay = <250>; + }; + + vreg_l8b_3p3: l8 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3400000>; + regulator-enable-ramp-delay = <250>; + regulator-ramp-delay = <0>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3624000>; + regulator-enable-ramp-delay = <500>; + regulator-ramp-delay = <0>; + }; + }; +}; + +&sdc2_state_on { + sd-cd { + pins = "gpio54"; + bias-pull-up; + drive-strength = <2>; + }; +}; + +&sdc2_state_off { + sd-cd { + pins = "gpio54"; + bias-disable; + drive-strength = <2>; + }; +}; + +&sdhc_1 { + status = "okay"; + supports-cqe; + + vmmc-supply = <&vreg_l4b_2p95>; + vqmmc-supply = <&vreg_l8a_1p8>; + + mmc-ddr-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; +}; + +&sdhc_2 { + status = "okay"; + + vmmc-supply = <&vreg_l5b_2p95>; + vqmmc-supply = <&vreg_l2b_2p95>; + + cd-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>; + no-sdio; + no-emmc; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <8 4>; + + sdc2_card_det_n: sd-card-det-n { + pins = "gpio54"; + function = "gpio"; + bias-pull-up; + }; +}; + +&usb2 { + status = "okay"; +}; + +&usb2_dwc3 { + dr_mode = "host"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +};