diff mbox series

[v1,2/9] clk: Introduce CLK_ASSUME_ENABLED_WHEN_UNUSED

Message ID 20220429151247.388837-2-robert.foss@linaro.org
State New
Headers show
Series [v1,1/9] clk: qcom: rcg2: Cache rate changes for parked RCGs | expand

Commit Message

Robert Foss April 29, 2022, 3:12 p.m. UTC
From: Bjorn Andersson <bjorn.andersson@linaro.org>

Some clock implementations doesn't provide means of implementing
is_enabled(), but still requires to be explicitly disabled when found
unused as part of clk_disable_unused().

One such set of clocks are Qualcomm's display RCGs. These can be enabled
and disabled automatically by the hardware, so it's not possible to
reliably query their configuration. Further more, these clocks need to
be disabled when unused, to allow them to be "parked" onto a safe
parent. Failure to disable the RCG results in the hardware locking up as
clk_disable_unused() traverses up the tree and turns off its source
clocks.

Add a new flag, CLK_ASSUME_ENABLED_BOOT, which clock drivers can use to
signal that these clocks should be disabled even if they don't implement
the is_enabled() ops.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/clk/clk.c            | 2 +-
 include/linux/clk-provider.h | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index ed119182aa1b..9789ec137219 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -1284,7 +1284,7 @@  static void __init clk_disable_unused_subtree(struct clk_core *core)
 	 * sequence.  call .disable_unused if available, otherwise fall
 	 * back to .disable
 	 */
-	if (clk_core_is_enabled(core)) {
+	if (clk_core_is_enabled(core) || core->flags & CLK_ASSUME_ENABLED_WHEN_UNUSED) {
 		trace_clk_disable(core);
 		if (core->ops->disable_unused)
 			core->ops->disable_unused(core->hw);
diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
index c10dc4c659e2..9038022ffebd 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -32,6 +32,8 @@ 
 #define CLK_OPS_PARENT_ENABLE	BIT(12)
 /* duty cycle call may be forwarded to the parent clock */
 #define CLK_DUTY_CYCLE_PARENT	BIT(13)
+/* assume clock is enabled if found unused in late init */
+#define CLK_ASSUME_ENABLED_WHEN_UNUSED	BIT(14)
 
 struct clk;
 struct clk_hw;