From patchwork Mon Apr 25 17:13:43 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Peter Geis X-Patchwork-Id: 565845 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 46A3DC433FE for ; Mon, 25 Apr 2022 17:13:59 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S243780AbiDYRRA (ORCPT ); Mon, 25 Apr 2022 13:17:00 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:57306 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S243775AbiDYRQ7 (ORCPT ); Mon, 25 Apr 2022 13:16:59 -0400 Received: from mail-qk1-x72a.google.com (mail-qk1-x72a.google.com [IPv6:2607:f8b0:4864:20::72a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0DDCF13DD7; Mon, 25 Apr 2022 10:13:54 -0700 (PDT) Received: by mail-qk1-x72a.google.com with SMTP id e128so11259319qkd.7; Mon, 25 Apr 2022 10:13:54 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=oAioprNETEkeNP3AEr8nOEM8MgiWKcO/wKpJyyoVSnQ=; b=N7JWI75DT/WlqkSPnKQntlr2Ah+Kwqw+y6b5qSk6465Ii+rc9q4vgLkujB8iZc7muQ yqlClnj9AVmPqHRAK6N//wqNoaSNMOKkJo5LMSBnIfEZwrm0BTdmvAd/K5liqlkUOaAC 90z86yOLg+NfJtcE0Ph9LiFyK4+WIfD4r2m/LYR8bPE15iBDKiNMN0C1iSXP8xwvjJ5q x0DpT5FGXyDejrD/UQ3cK7q91/bDU4XbFs0lCgioEWGb1lQddisDnpideptUref/0dFM JkgiIHZm/W8sln3HXAzGFUXI3wqQ/Cn61qd0K/GmObA1oP7m0S59gI6c7M+jy/1n5Qaz iIJQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=oAioprNETEkeNP3AEr8nOEM8MgiWKcO/wKpJyyoVSnQ=; b=iZHRyAjjzi0kugNMOnUT131i8NGIpz0hrJu34L+9VGPYRCIyWXH8A5bIEoR3HLE2o+ 3G4ytHX8KkYApHwSqXe6R6B/DrueTfOiKxWH8uW5LPS54F0LWBbJ6Bc2cvjF1acBVL3Z JTwltgLriw2esxCHuj86y4nFuzHrWyUdEl0TYeEcq2ZaS0OOyROuHuqGj77tVfZ80b0z VSOnClmAA1QYdCe94mxwa1sVn2lz/lXAFwqCX9vvOqmYAkUMnEigu6FtN1e0UTDzhway d6q9h1fZhjd/RtynfOMA5mfBOGD82M5OKzMHhgUMTl2A/Mu0gAP1k7q9XyuA2jearHox YUCQ== X-Gm-Message-State: AOAM531zOxpVB3jiLPhPWGHb9NljVUv6E+5BVGGclJF9HHC5eGkzc7Ks GiR5BG4++sHMgbhqZRxGDhk= X-Google-Smtp-Source: ABdhPJwEye4vimf4V3yXKCMG9jJtjgaUiOPgA0qUbQW6WVCqDWPwib/gXHuSLomUEb+idBzQWqKPtQ== X-Received: by 2002:a05:620a:1791:b0:69f:46bb:aefd with SMTP id ay17-20020a05620a179100b0069f46bbaefdmr4681136qkb.720.1650906833028; Mon, 25 Apr 2022 10:13:53 -0700 (PDT) Received: from master-x64.sparksnet ([2601:153:980:85b1::10]) by smtp.gmail.com with ESMTPSA id v3-20020a05622a014300b002e1dcd4cfa9sm7154928qtw.64.2022.04.25.10.13.52 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 25 Apr 2022 10:13:52 -0700 (PDT) From: Peter Geis To: linux-rockchip@lists.infradead.org, Rob Herring , Krzysztof Kozlowski , Heiko Stuebner Cc: Peter Geis , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v1 6/7] arm64: dts: rockchip: add SoQuartz CM4IO dts Date: Mon, 25 Apr 2022 13:13:43 -0400 Message-Id: <20220425171344.1924057-7-pgwipeout@gmail.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220425171344.1924057-1-pgwipeout@gmail.com> References: <20220425171344.1924057-1-pgwipeout@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org This is the initial SoQuartz SoM device tree on a CM4IO carrier board. This board outputs debug on uart2 and supports the following components: Gigabit Ethernet USB2 (OTG/Host shared) PCIe 2.0 x1 HDMI (HDMI Port 0) eDP (HDMI Port 1) DSI (RPi compatible pinout) CSI (RPi compatible pinout) A/B/G/N WiFi Bluetooth SDMMC eMMC SPI NOR Flash (Not placed) PI-40 compatible pin header Signed-off-by: Peter Geis --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3566-soquartz-cm4.dts | 167 +++++ .../boot/dts/rockchip/rk3566-soquartz.dtsi | 607 ++++++++++++++++++ 3 files changed, 775 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 252ee47b8a1d..23a2a0c111ac 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -60,5 +60,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts new file mode 100644 index 000000000000..fa470a587e2b --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz-cm4.dts @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include "rk3566-soquartz.dtsi" + +/ { + model = "Pine64 RK3566 SoQuartz with CM4-IO Carrier Board"; + compatible = "pine64,soquartz-cm4io", "pine64,soquartz", "rockchip,rk3566"; + + /* labeled +12v in schematic */ + vcc12v_dcin: vcc12v-dcin-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + /* labeled +5v in schematic */ + vcc_5v: vcc-5v-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; +}; + +&gmac1 { + status = "okay"; +}; + +/* i2c1 is exposed on CM1 / Module1A + * pin 80 - SCL0 - i2c1_scl_m0, pullup to vcc3v3_pmu + * pin 82 - SDA0 - i2c1_sda_m0, pullup to vcc3v3_pmu + */ +&i2c1 { + status = "okay"; + + /* the rtc interrupt is tied to PMIC_PWRON, + * it will force reset the board if triggered. + */ + pcf85063: rtc@51 { + compatible = "nxp,pcf85063"; + reg = <0x51>; + }; +}; + +/* i2c2 is exposed on CM1 / Module1A - to PI40 + * pin 56 - GPIO3 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch + * pin 58 - GPIO2 - i2c2_sda_m1, pullup to vcc_3v3 + */ +&i2c2 { + status = "disabled"; +}; + +/* i2c3 is exposed on CM1 / Module1A - to PI40 + * pin 35 - ID_SC(GPIO28) - i2c3_scl_m0, pullup to vcc_3v3 + * pin 36 - ID_SD(GPIO27) - i2c3_sda_m0, pullup to vcc_3v3 + */ +&i2c3 { + status = "disabled"; +}; + +/* i2c4 is exposed on CM2 / Module1B - to PI40 + * pin 45 - GPIO24 - i2c4_scl_m1 + * pin 47 - GPIO23 - i2c4_sda_m1 + */ +&i2c4 { + status = "disabled"; +}; + +/* i2s1_8ch is exposed on CM1 / Module1A - to PI40 + * pin 24 - GPIO26 - i2s1_sdi1_m1 + * pin 25 - GPIO21 - i2s1_sdo0_m1 + * pin 26 - GPIO19 - i2s1_lrck_tx_m1 + * pin 27 - GPIO20 - i2s1_sdi0_m1 + * pin 29 - GPIO16 - i2s1_sdi3_m1 + * pin 30 - GPIO6 - i2s1_sdi2_m1 + * pin 40 - GPIO9 - i2s1_sdo1_m1, shared with spi3 + * pin 41 - GPIO25 - i2s1_sdo2_m1 + * pin 49 - GPIO18 - i2s1_sclk_tx_m1 + * pin 50 - GPIO17 - i2s1_mclk_m1 + * pin 56 - GPIO3 - i2s1_sdo3_m1, shared with i2c2 + */ +&i2s1_8ch { + status = "disabled"; +}; + +&led_diy { + status = "okay"; +}; + +&led_work { + status = "okay"; +}; + +&rgmii_phy1 { + status = "okay"; +}; + +/* saradc is exposed on CM1 / Module1A - to J2 + * pin 94 - AIN1 - saradc_vin3 + * pin 96 - AIN0 - saradc_vin2 + */ +&saradc { + status = "disabled"; +}; + +&sdmmc0 { + vmmc-supply = <&sdmmc_pwr>; + status = "okay"; +}; + +&sdmmc_pwr { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + status = "okay"; +}; + +/* spi3 is exposed on CM1 / Module1A - to PI40 + * pin 37 - GPIO7 - spi3_cs1_m0 + * pin 38 - GPIO11 - spi3_clk_m0 + * pin 39 - GPIO8 - spi3_cs0_m0 + * pin 40 - GPIO9 - spi3_miso_m0, shared with i2s1_8ch + * pin 44 - GPIO10 - spi3_mosi_m0 + */ +&spi3 { + status = "disabled"; +}; + +/* uart2 is exposed on CM1 / Module1A - to PI40 + * pin 51 - GPIO15 - uart2_rx_m0 + * pin 55 - GPIO14 - uart2_tx_m0 + */ +&uart2 { + status = "okay"; +}; + +/* uart7 is exposed on CM1 / Module1A - to PI40 + * pin 46 - GPIO22 - uart7_tx_m2 + * pin 47 - GPIO23 - uart7_rx_m2 + */ +&uart7 { + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc_5v>; + status = "okay"; +}; + +&usb_host0_xhci { + status = "okay"; +}; + +&vbus { + vin-supply = <&vcc_5v>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi new file mode 100644 index 000000000000..9ebb2afe7e82 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-soquartz.dtsi @@ -0,0 +1,607 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include +#include +#include "rk3566.dtsi" + +/ { + model = "Pine64 RK3566 SoQuartz SOM"; + compatible = "pine64,soquartz", "rockchip,rk3566"; + + aliases { + ethernet0 = &gmac1; + mmc0 = &sdmmc0; + mmc1 = &sdhci; + mmc2 = &sdmmc1; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + gmac1_clkin: external-gmac1-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac1_clkin"; + #clock-cells = <0>; + }; + + leds { + compatible = "gpio-leds"; + + led_diy: led-diy { + label = "diy-led"; + default-state = "on"; + gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + pinctrl-names = "default"; + pinctrl-0 = <&diy_led_enable_h>; + retain-state-suspended; + status = "disabled"; + }; + + led_work: led-work { + label = "work-led"; + default-state = "off"; + gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_enable_h>; + retain-state-suspended; + status = "disabled"; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + status = "okay"; + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_LOW>; + }; + + vbus: vbus-regulator { + compatible = "regulator-fixed"; + regulator-name = "vbus"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + /* sourced from vbus, vbus is provided by the carrier board */ + vcc5v0_sys: vcc5v0-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vbus>; + }; + + vcc3v3_sys: vcc3v3-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + sdmmc_pwr: sdmmc-pwr-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr_h>; + regulator-name = "sdmmc_pwr"; + status = "disabled"; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gmac1 { + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>; + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru SCLK_GMAC1>, <&gmac1_clkin>; + clock_in_out = "input"; + phy-supply = <&vcc_3v3>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac1m0_miim + &gmac1m0_tx_bus2 + &gmac1m0_rx_bus2 + &gmac1m0_rgmii_clk + &gmac1m0_clkinout + &gmac1m0_rgmii_bus>; + snps,reset-gpio = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + /* Reset time is 20ms, 100ms for rtl8211f, also works well here */ + snps,reset-delays-us = <0 20000 100000>; + tx_delay = <0x30>; + rx_delay = <0x10>; + phy-handle = <&rgmii_phy1>; + status = "disabled"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = ; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-name = "vdd_gpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-init-microvolt = <900000>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_npu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_image"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_image"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-name = "vcc3v3_sd"; + status = "disabled"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + }; + }; +}; + +/* i2c1 is exposed on CM1 / Module1A + * pin 80 - i2c1_scl_m0, pullup to vcc3v3_pmu + * pin 82 - i2c1_sda_m0, pullup to vcc3v3_pmu + */ +&i2c1 { + status = "disabled"; +}; + +/* i2c2 is exposed on CM1 / Module1A + * pin 56 - i2c2_scl_m1, pullup to vcc_3v3, shared with i2s1_8ch + * pin 58 - i2c2_sda_m1, pullup to vcc_3v3 + */ +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2m1_xfer>; + status = "disabled"; +}; + +/* i2c3 is exposed on CM1 / Module1A + * pin 35 - i2c3_scl_m0, pullup to vcc_3v3 + * pin 36 - i2c3_sda_m0, pullup to vcc_3v3 + */ +&i2c3 { + status = "disabled"; +}; + +/* i2c4 is exposed on CM2 / Module1B + * pin 45 - i2c4_scl_m1 + * pin 47 - i2c4_sda_m1 + */ +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4m1_xfer>; + status = "disabled"; +}; + +/* i2s1_8ch is exposed on CM1 / Module1A + * pin 24 - i2s1_sdi1_m1 + * pin 25 - i2s1_sdo0_m1 + * pin 26 - i2s1_lrck_tx_m1 + * pin 27 - i2s1_sdi0_m1 + * pin 29 - i2s1_sdi3_m1 + * pin 30 - i2s1_sdi2_m1 + * pin 40 - i2s1_sdo1_m1, shared with spi3 + * pin 41 - i2s1_sdo2_m1 + * pin 49 - i2s1_sclk_tx_m1 + * pin 50 - i2s1_mclk_m1 + * pin 56 - i2s1_sdo3_m1, shared with i2c2 + */ +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m1_sclktx &i2s1m1_sclkrx + &i2s1m1_lrcktx &i2s1m1_lrckrx + &i2s1m1_sdi0 &i2s1m1_sdi1 + &i2s1m1_sdi2 &i2s1m1_sdi3 + &i2s1m1_sdo0 &i2s1m1_sdo1 + &i2s1m1_sdo2 &i2s1m1_sdo3>; + status = "disabled"; +}; + +&mdio1 { + rgmii_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + status = "disabled"; + }; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + work_led_enable_h: work-led-enable-h { + rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_enable_h: diy-led-enable-h { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc-pwr { + sdmmc_pwr_h: sdmmc-pwr-h { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vcc_1v8>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +/* saradc is exposed on CM1 / Module1A + * pin 94 - saradc_vin3 + * pin 96 - saradc_vin2 + */ +&saradc { + vref-supply = <&vcca_1v8>; + status = "disabled"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs200-1_8v; + non-removable; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc0 { + broken-cd; + bus-width = <4>; + cap-sd-highspeed; + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + vqmmc-supply = <&vccio_sd>; + status = "disabled"; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + sd-uhs-sdr104; + vmmc-supply = <&vcc3v3_sys>; + vqmmc-supply = <&vcc_1v8>; + status = "okay"; +}; + +/* spi3 is exposed on CM1 / Module1A + * pin 37 - spi3_cs1_m0 + * pin 38 - spi3_clk_m0 + * pin 39 - spi3_cs0_m0 + * pin 40 - spi3_miso_m0, shared with i2s1_8ch + * pin 44 - spi3_mosi_m0 + */ +&spi3 { + status = "disabled"; +}; + +&tsadc { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk809 1>; + clock-names = "lpo"; + device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vcca1v8_pmu>; + }; +}; + +/* uart2 is exposed on CM1 / Module1A + * pin 51 - uart2_rx_m0 + * pin 55 - uart2_tx_m0 + */ +&uart2 { + status = "disabled"; +}; + +/* uart7 is exposed on CM1 / Module1A + * pin 46 - uart7_tx_m2 + * pin 47 - uart7_rx_m2 + */ +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7m2_xfer>; + status = "disabled"; +}; + +/* dwc3_otg is the only usb port available */ +&usb2phy0 { + status = "disabled"; +}; + +&usb2phy0_otg { + status = "disabled"; +}; + +&usb_host0_xhci { + status = "disabled"; +};