[v13,1/3] dt-binding: mt8183: add Mediatek MDP3 dt-bindings

diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
new file mode 100644
index 000000000000..45b7c075ebf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rdma.yaml
@@ -0,0 +1,166 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-rdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Read Direct Memory Access
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description: |
+  Mediatek Read Direct Memory Access(RDMA) component used to do read DMA.
+  It contains one line buffer to store the sufficient pixel data, and
+  must be siblings to the central MMSYS_CONFIG node.
+  For a description of the MMSYS_CONFIG binding, see
+  Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+  for details.
+  The 1st RDMA is also used to be a controller node in Media Data Path 3(MDP3)
+  that containing MMSYS, MUTEX, GCE and SCP settings.
+
+properties:
+  compatible:
+    items:
+      # MDP3 controller node
+      - const: mediatek,mt8183-mdp3
+      - const: mediatek,mt8183-mdp3-rdma
+
+  mediatek,scp:
+    description: |
+      The node of system control processor (SCP), using
+      the remoteproc & rpmsg framework.
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    maxItems: 1
+
+  mediatek,mdp3-comps:
+    description: |
+      MDP subsystem which has direct-link from Image Signal Processor(ISP).
+      When using the camera, the DMA of ISP PASS (DIP) module will directly
+      trigger MDP3 without other control (such as V4L2 M2M) to create
+      corresponding HW path.
+      The MDP3 controller must set up a series of registers at the beginning of
+      path creation which covering MMSYS, IMGSYS, and MDP3's components,
+      so that data flow can pass through MDP3.
+      The entire path is briefly described as follows
+      ISP --+
+            |
+            +-> DIP --+
+      ................|..............................................
+      (MDP3)          +->IMGI -+-> DL1 ->  RSZ -+-> PATH1 -> WROT
+                               |            ^   |
+                               |            |   |
+                               +-> DL2 -----+   +-> PATH2 -> WDMA
+                               |
+                               +---------------------------> EXTO
+    $ref: '/schemas/types.yaml#/definitions/string-array'
+    items:
+      enum:
+        # MDP direct-link input path selection, create a
+        # component for path connectedness of HW pipe control
+        - mediatek,mt8183-mdp3-dl1
+        - mediatek,mt8183-mdp3-dl2
+        # MDP direct-link output path selection, create a
+        # component for path connectedness of HW pipe control
+        - mediatek,mt8183-mdp3-path1
+        - mediatek,mt8183-mdp3-path2
+        # Input DMA of ISP PASS2 (DIP) module for raw image input
+        - mediatek,mt8183-mdp3-imgi
+        # Output DMA of ISP PASS2 (DIP) module for YUV image output
+        - mediatek,mt8183-mdp3-exto
+
+  reg:
+    items:
+      - description: basic RDMA HW address
+      - description: MDP direct-link 1st and 2nd input
+      - description: MDP direct-link 1st output
+      - description: MDP direct-link 2nd output
+      - description: ISP input and output
+
+  mediatek,gce-client-reg:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    minItems: 1
+    items:
+      - description: GCE client for RDMA
+      - description: GCE client for dl1 and dl2
+      - description: GCE client for path1
+      - description: GCE client for path2
+      - description: GCE client for imgi and exto
+    description: |
+      The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RDMA clock
+      - description: RSZ clock
+      - description: direck-link TX clock in MDP side
+      - description: direck-link RX clock in MDP side
+      - description: direck-link TX clock in ISP side
+      - description: direck-link RX clock in ISP side
+
+  iommus:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: used for 1st data pipe from RDMA
+      - description: used for 2nd data pipe from RDMA
+      - description: used for 3rd data pipe from Direct-Link
+      - description: used for 4th data pipe from Direct-Link
+
+required:
+  - compatible
+  - mediatek,scp
+  - reg
+  - clocks
+  - mediatek,gce-client-reg
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    mdp3_rdma0: mdp3_rdma0@14001000 {
+      compatible = "mediatek,mt8183-mdp3",
+                   "mediatek,mt8183-mdp3-rdma";
+      mediatek,scp = <&scp>;
+      mediatek,mdp3-comps = "mediatek,mt8183-mdp3-dl1",
+                            "mediatek,mt8183-mdp3-dl2",
+                            "mediatek,mt8183-mdp3-path1",
+                            "mediatek,mt8183-mdp3-path2",
+                            "mediatek,mt8183-mdp3-imgi",
+                            "mediatek,mt8183-mdp3-exto";
+      reg = <0x14001000 0x1000>,
+            <0x14000000 0x1000>,
+            <0x14005000 0x1000>,
+            <0x14006000 0x1000>,
+            <0x15020000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>,
+                                <&gce SUBSYS_1400XXXX 0 0x1000>,
+                                <&gce SUBSYS_1400XXXX 0x5000 0x1000>,
+                                <&gce SUBSYS_1400XXXX 0x6000 0x1000>,
+                                <&gce SUBSYS_1502XXXX 0 0x1000>;
+      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+      clocks = <&mmsys CLK_MM_MDP_RDMA0>,
+               <&mmsys CLK_MM_MDP_RSZ1>,
+               <&mmsys CLK_MM_MDP_DL_TXCK>,
+               <&mmsys CLK_MM_MDP_DL_RX>,
+               <&mmsys CLK_MM_IPU_DL_TXCK>,
+               <&mmsys CLK_MM_IPU_DL_RX>;
+      iommus = <&iommu>;
+      mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
+               <&gce 21 CMDQ_THR_PRIO_LOWEST>,
+               <&gce 22 CMDQ_THR_PRIO_LOWEST>,
+               <&gce 23 CMDQ_THR_PRIO_LOWEST>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
new file mode 100644
index 000000000000..0dcb1a883a8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-rsz.yaml
@@ -0,0 +1,54 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-rsz.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Resizer
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description: |
+  One of Media Data Path 3 (MDP3) components used to do frame resizing.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-rsz
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    mdp3_rsz0: mdp3_rsz0@14003000 {
+      compatible = "mediatek,mt8183-mdp3-rsz";
+      reg = <0x14003000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>;
+      clocks = <&mmsys CLK_MM_MDP_RSZ0>;
+    };
+
+    mdp3_rsz1: mdp3_rsz1@14004000 {
+      compatible = "mediatek,mt8183-mdp3-rsz";
+      reg = <0x14004000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x4000 0x1000>;
+      clocks = <&mmsys CLK_MM_MDP_RSZ1>;
+    };
diff --git a/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
new file mode 100644
index 000000000000..f2c38a9b187d
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/mediatek,mdp3-wrot.yaml
@@ -0,0 +1,57 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/mediatek,mdp3-wrot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Write DMA with Rotation
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description: |
+  One of Media Data Path 3 (MDP3) components used to write DMA with frame rotation.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-wrot
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  iommus:
+    maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    mdp3_wrot0: mdp3_wrot0@14005000 {
+      compatible = "mediatek,mt8183-mdp3-wrot";
+      reg = <0x14005000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+      clocks = <&mmsys CLK_MM_MDP_WROT0>;
+      iommus = <&iommu>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml
new file mode 100644
index 000000000000..cf23f4f5bd69
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,ccorr.yaml
@@ -0,0 +1,47 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,ccorr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek color correction
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description: |
+  Mediatek color correction with 3X3 matrix.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-ccorr
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+
+    mdp3_ccorr: mdp3_ccorr@1401c000 {
+      compatible = "mediatek,mt8183-mdp3-ccorr";
+      reg = <0x1401c000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xc000 0x1000>;
+      clocks = <&mmsys CLK_MM_MDP_CCORR>;
+    };
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
new file mode 100644
index 000000000000..4057b5232e45
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,wdma.yaml
@@ -0,0 +1,58 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,wdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek Write Direct Memory Access
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+
+description: |
+  Mediatek Write Direct Memory Access(WDMA) component used to write
+  the data into DMA.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8183-mdp3-wdma
+
+  reg:
+    maxItems: 1
+
+  mediatek,gce-client-reg:
+    description: The register of client driver can be configured by gce with
+      4 arguments defined in this property, such as phandle of gce, subsys id,
+      register offset and size. Each GCE subsys id is mapping to a client
+      defined in the header include/dt-bindings/gce/<chip>-gce.h.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+
+  iommus:
+    maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/gce/mt8183-gce.h>
+    #include <dt-bindings/power/mt8183-power.h>
+    #include <dt-bindings/memory/mt8183-larb-port.h>
+
+    mdp3_wdma: mdp3_wdma@14006000 {
+      compatible = "mediatek,mt8183-mdp3-wdma";
+      reg = <0x14006000 0x1000>;
+      mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+      power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
+      clocks = <&mmsys CLK_MM_MDP_WDMA0>;
+      iommus = <&iommu>;
+    };