@@ -53,6 +53,24 @@ struct dw_spi_mscc {
void __iomem *spi_mst; /* Not sparx5 */
};
+struct dw_spi_elba {
+ struct regmap *regmap;
+ unsigned int reg;
+};
+
+/*
+ * Elba SoC does not use ssi, pin override is used for cs 0,1 and
+ * gpios for cs 2,3 as defined in the device tree.
+ *
+ * cs: | 1 0
+ * bit: |---3-------2-------1-------0
+ * | cs1 cs1_ovr cs0 cs0_ovr
+ */
+#define ELBA_SPICS_SHIFT(cs) (2 * (cs))
+#define ELBA_SPICS_MASK(cs) (0x3 << ELBA_SPICS_SHIFT(cs))
+#define ELBA_SPICS_SET(cs, val) \
+ ((((val) << 1) | 0x1) << ELBA_SPICS_SHIFT(cs))
+
/*
* The Designware SPI controller (referred to as master in the documentation)
* automatically deasserts chip select when the tx fifo is empty. The chip
@@ -238,6 +256,72 @@ static int dw_spi_canaan_k210_init(struct platform_device *pdev,
return 0;
}
+static void elba_spics_set_cs(struct dw_spi_elba *dwselba, int cs, int enable)
+{
+ regmap_update_bits(dwselba->regmap, dwselba->reg, ELBA_SPICS_MASK(cs),
+ ELBA_SPICS_SET(cs, enable));
+}
+
+static void dw_spi_elba_set_cs(struct spi_device *spi, bool enable)
+{
+ struct dw_spi *dws = spi_master_get_devdata(spi->master);
+ struct dw_spi_mmio *dwsmmio = container_of(dws, struct dw_spi_mmio, dws);
+ struct dw_spi_elba *dwselba = dwsmmio->priv;
+ u8 cs;
+
+ cs = spi->chip_select;
+ if (cs < 2) {
+ /* overridden native chip-select */
+ elba_spics_set_cs(dwselba, spi->chip_select, enable);
+ }
+
+ /*
+ * The DW SPI controller needs a native CS bit selected to start
+ * the serial engine and the platform may have fewer native CSs
+ * than needed, so use CS0 always.
+ */
+ spi->chip_select = 0;
+ dw_spi_set_cs(spi, enable);
+ spi->chip_select = cs;
+}
+
+static int dw_spi_elba_init(struct platform_device *pdev,
+ struct dw_spi_mmio *dwsmmio)
+{
+ struct of_phandle_args args;
+ struct dw_spi_elba *dwselba;
+ struct regmap *regmap;
+ int rc;
+
+ rc = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
+ "pensando,syscon-spics", 1, 0, &args);
+ if (rc) {
+ dev_err(&pdev->dev, "could not find spics\n");
+ return rc;
+ }
+
+ regmap = syscon_node_to_regmap(args.np);
+ if (IS_ERR(regmap))
+ return dev_err_probe(&pdev->dev, PTR_ERR(regmap),
+ "could not map spics");
+
+ dwselba = devm_kzalloc(&pdev->dev, sizeof(*dwselba), GFP_KERNEL);
+ if (!dwselba)
+ return -ENOMEM;
+
+ dwselba->regmap = regmap;
+ dwselba->reg = args.args[0];
+
+ /* deassert cs */
+ elba_spics_set_cs(dwselba, 0, 1);
+ elba_spics_set_cs(dwselba, 1, 1);
+
+ dwsmmio->priv = dwselba;
+ dwsmmio->dws.set_cs = dw_spi_elba_set_cs;
+
+ return 0;
+}
+
static int dw_spi_mmio_probe(struct platform_device *pdev)
{
int (*init_func)(struct platform_device *pdev,
@@ -352,6 +436,7 @@ static const struct of_device_id dw_spi_mmio_of_match[] = {
{ .compatible = "intel,keembay-ssi", .data = dw_spi_keembay_init},
{ .compatible = "microchip,sparx5-spi", dw_spi_mscc_sparx5_init},
{ .compatible = "canaan,k210-spi", dw_spi_canaan_k210_init},
+ { .compatible = "pensando,elba-spi", .data = dw_spi_elba_init},
{ /* end of table */}
};
MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match);
The Pensando Elba SoC includes a DW apb_ssi v4 controller with device specific chip-select control. The Elba SoC provides four chip-selects where the native DW IP supports two chip-selects. The Elba DW_SPI instance has two native CS signals that are always overridden. Signed-off-by: Brad Larson <brad@pensando.io> --- Change from V3: - Use more descriptive dt property pensando,syscon-spics - Minor changes from review input drivers/spi/spi-dw-mmio.c | 85 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+)