diff mbox series

[RFC,net-next,v2,3/3] net: phy: mscc-miim: add support to set MDIO bus frequency

Message ID 20220401215834.3757692-4-michael@walle.cc
State Accepted
Commit bb2a1934ca01d32ab7d8d109e574682199725afd
Headers show
Series None | expand

Commit Message

Michael Walle April 1, 2022, 9:58 p.m. UTC
Until now, the MDIO bus will have the hardware default bus frequency.
Read the desired frequency of the bus from the device tree and configure
it.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 drivers/net/mdio/mdio-mscc-miim.c | 58 +++++++++++++++++++++++++++++--
 1 file changed, 56 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/mdio/mdio-mscc-miim.c b/drivers/net/mdio/mdio-mscc-miim.c
index c9efcfa2a1ce..7fd979f68dc0 100644
--- a/drivers/net/mdio/mdio-mscc-miim.c
+++ b/drivers/net/mdio/mdio-mscc-miim.c
@@ -7,6 +7,7 @@ 
  */
 
 #include <linux/bitops.h>
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
@@ -30,6 +31,8 @@ 
 #define		MSCC_MIIM_CMD_VLD		BIT(31)
 #define MSCC_MIIM_REG_DATA		0xC
 #define		MSCC_MIIM_DATA_ERROR		(BIT(16) | BIT(17))
+#define MSCC_MIIM_REG_CFG		0x10
+#define		MSCC_MIIM_CFG_PRESCALE_MASK	GENMASK(7, 0)
 
 #define MSCC_PHY_REG_PHY_CFG	0x0
 #define		PHY_CFG_PHY_ENA		(BIT(0) | BIT(1) | BIT(2) | BIT(3))
@@ -50,6 +53,8 @@  struct mscc_miim_dev {
 	int mii_status_offset;
 	struct regmap *phy_regs;
 	const struct mscc_miim_info *info;
+	struct clk *clk;
+	u32 bus_freq;
 };
 
 /* When high resolution timers aren't built-in: we can't use usleep_range() as
@@ -242,9 +247,32 @@  int mscc_miim_setup(struct device *dev, struct mii_bus **pbus, const char *name,
 }
 EXPORT_SYMBOL(mscc_miim_setup);
 
+static int mscc_miim_clk_set(struct mii_bus *bus)
+{
+	struct mscc_miim_dev *miim = bus->priv;
+	unsigned long rate;
+	u32 div;
+
+	/* Keep the current settings */
+	if (!miim->bus_freq)
+		return 0;
+
+	rate = clk_get_rate(miim->clk);
+
+	div = DIV_ROUND_UP(rate, 2 * miim->bus_freq) - 1;
+	if (div == 0 || div & ~MSCC_MIIM_CFG_PRESCALE_MASK) {
+		dev_err(&bus->dev, "Incorrect MDIO clock frequency\n");
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(miim->regs, MSCC_MIIM_REG_CFG,
+				  MSCC_MIIM_CFG_PRESCALE_MASK, div);
+}
+
 static int mscc_miim_probe(struct platform_device *pdev)
 {
 	struct regmap *mii_regmap, *phy_regmap = NULL;
+	struct device_node *np = pdev->dev.of_node;
 	void __iomem *regs, *phy_regs;
 	struct mscc_miim_dev *miim;
 	struct resource *res;
@@ -295,21 +323,47 @@  static int mscc_miim_probe(struct platform_device *pdev)
 	if (!miim->info)
 		return -EINVAL;
 
-	ret = of_mdiobus_register(bus, pdev->dev.of_node);
+	miim->clk = devm_clk_get_optional(&pdev->dev, NULL);
+	if (IS_ERR(miim->clk))
+		return PTR_ERR(miim->clk);
+
+	of_property_read_u32(np, "clock-frequency", &miim->bus_freq);
+
+	if (miim->bus_freq && !miim->clk) {
+		dev_err(&pdev->dev,
+			"cannot use clock-frequency without a clock\n");
+		return -EINVAL;
+	}
+
+	ret = clk_prepare_enable(miim->clk);
+	if (ret)
+		return ret;
+
+	ret = mscc_miim_clk_set(bus);
+	if (ret)
+		goto out_disable_clk;
+
+	ret = of_mdiobus_register(bus, np);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret);
-		return ret;
+		goto out_disable_clk;
 	}
 
 	platform_set_drvdata(pdev, bus);
 
 	return 0;
+
+out_disable_clk:
+	clk_disable_unprepare(miim->clk);
+	return ret;
 }
 
 static int mscc_miim_remove(struct platform_device *pdev)
 {
 	struct mii_bus *bus = platform_get_drvdata(pdev);
+	struct mscc_miim_dev *miim = bus->priv;
 
+	clk_disable_unprepare(miim->clk);
 	mdiobus_unregister(bus);
 
 	return 0;