From patchwork Thu Mar 17 16:23:48 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andre Przywara X-Patchwork-Id: 552316 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C1DD3C4332F for ; Thu, 17 Mar 2022 16:24:34 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236529AbiCQQZt (ORCPT ); Thu, 17 Mar 2022 12:25:49 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34326 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236516AbiCQQZp (ORCPT ); Thu, 17 Mar 2022 12:25:45 -0400 Received: from foss.arm.com (foss.arm.com [217.140.110.172]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 231C9C748B; Thu, 17 Mar 2022 09:24:28 -0700 (PDT) Received: from usa-sjc-imap-foss1.foss.arm.com (unknown [10.121.207.14]) by usa-sjc-mx-foss1.foss.arm.com (Postfix) with ESMTP id DA233165C; Thu, 17 Mar 2022 09:24:27 -0700 (PDT) Received: from donnerap.arm.com (donnerap.cambridge.arm.com [10.1.196.172]) by usa-sjc-imap-foss1.foss.arm.com (Postfix) with ESMTPSA id E36B13FA1C; Thu, 17 Mar 2022 09:24:25 -0700 (PDT) From: Andre Przywara To: Maxime Ripard , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland Cc: Rob Herring , Mesih Kilinc , Icenowy Zheng , Jesse Taube , Giulio Benetti , George Hilliard , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, Mark Brown , linux-spi@vger.kernel.org Subject: [PATCH v2 11/12] ARM: dts: suniv: F1C100: add SPI support Date: Thu, 17 Mar 2022 16:23:48 +0000 Message-Id: <20220317162349.739636-12-andre.przywara@arm.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20220317162349.739636-1-andre.przywara@arm.com> References: <20220317162349.739636-1-andre.przywara@arm.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The F1C100 series contains two SPI controllers, and many boards use SPI0 for a SPI flash, as the BROM is able to boot from that. Describe the two controllers in the SoC .dtsi, and also add the PortC pins for SPI0, since this is where BROM looks at when trying to boot from the commonly used SPI flash. The SPI controller seems to be the same as in the H3 chips, but it lacks a separate mod clock. The manual says it's connected to AHB directly. We don't export that AHB clock directly, but can use the AHB *gate* clock as a clock source, since the SPI driver is not supposed to change the AHB frequency anyway. Signed-off-by: Andre Przywara --- arch/arm/boot/dts/suniv-f1c100s.dtsi | 33 ++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index 59e0bd952f50..0edc1724407b 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -69,6 +69,34 @@ otg_sram: sram-section@0 { }; }; + spi0: spi@1c05000 { + compatible = "allwinner,suniv-f1c100s-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c05000 0x1000>; + interrupts = <10>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_BUS_SPI0>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@1c06000 { + compatible = "allwinner,suniv-f1c100s-spi", + "allwinner,sun8i-h3-spi"; + reg = <0x01c06000 0x1000>; + interrupts = <11>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_BUS_SPI1>; + clock-names = "ahb", "mod"; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + mmc0: mmc@1c0f000 { compatible = "allwinner,suniv-f1c100s-mmc", "allwinner,sun7i-a20-mmc"; @@ -138,6 +166,11 @@ mmc0_pins: mmc0-pins { drive-strength = <30>; }; + spi0_pc_pins: spi0-pc-pins { + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; + }; + uart0_pe_pins: uart0-pe-pins { pins = "PE0", "PE1"; function = "uart0";