diff mbox series

[RFCv3,6/6] media: ds90ub953: new driver for TI DS90UB953-Q1 video serializer

Message ID 20220206115939.3091265-7-luca@lucaceresoli.net
State New
Headers show
Series Hi, | expand

Commit Message

Luca Ceresoli Feb. 6, 2022, 11:59 a.m. UTC
Add a driver for the TI DS90UB953-Q1, a MIPI CSI-2 video serializer that
forwards a MIPI CSI-2 input video stream over an FPD Link 3 connection to a
remote deserializer. It also allows access to I2C and GPIO from the
deserializer.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>

---

Changes RFCv2 -> v3:

 - expose error counters in sysfs
 - avoid spurions "Cannot read register" during reset
 - add sysfs attribute for error status
 - add vendor prefix to DT property gpio-functions
 - use common clock framework, expose CLK_OUT as a clock
 - code reorganization and cleanups

Changes RFCv1 -> RFCv2: none, this patch is new in RFCv2
---
 MAINTAINERS                   |   1 +
 drivers/media/i2c/Kconfig     |  10 +
 drivers/media/i2c/Makefile    |   1 +
 drivers/media/i2c/ds90ub953.c | 560 ++++++++++++++++++++++++++++++++++
 4 files changed, 572 insertions(+)
 create mode 100644 drivers/media/i2c/ds90ub953.c
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 5aeb557ab5da..85fc43ff22d9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19095,6 +19095,7 @@  M:	Luca Ceresoli <luca@lucaceresoli.net>
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/media/i2c/ti,ds90ub953-q1.yaml
+F:	drivers/media/i2c/ds90ub953.c
 F:	include/dt-bindings/media/ds90ub953.h
 
 TEXAS INSTRUMENTS DS90UB954 VIDEO DESERIALIZER DRIVER
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 9a02444bd647..d84e7679d0ed 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -492,6 +492,16 @@  config VIDEO_DS90UB954
 	  To compile this driver as a module, choose M here: the
 	  module will be called ds90ub954.
 
+config VIDEO_DS90UB953
+	tristate "TI DS90UB953-Q1 serializer"
+	help
+	  Device driver for the Texas Instruments "DS90UB953-Q1
+	  FPD-Link III 4.16-Gbps Serializer With CSI-2 Interface for
+	  2.3MP/60fps Cameras, RADAR, and Other Sensors".
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ds90ub953.
+
 comment "Video and audio decoders"
 
 config VIDEO_SAA717X
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index 84e9ad00236a..178de6ad736c 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -136,6 +136,7 @@  obj-$(CONFIG_VIDEO_MAX9271_LIB)	+= max9271.o
 obj-$(CONFIG_VIDEO_RDACM20)	+= rdacm20.o
 obj-$(CONFIG_VIDEO_RDACM21)	+= rdacm21.o
 obj-$(CONFIG_VIDEO_DS90UB954)	+= ds90ub954.o
+obj-$(CONFIG_VIDEO_DS90UB953)	+= ds90ub953.o
 obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
 
 obj-$(CONFIG_SDR_MAX2175) += max2175.o
diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c
new file mode 100644
index 000000000000..d4f4621d66eb
--- /dev/null
+++ b/drivers/media/i2c/ds90ub953.c
@@ -0,0 +1,560 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * Driver for the Texas Instruments DS90UB953-Q1 video serializer
+ *
+ * Copyright (c) 2019 Luca Ceresoli <luca@lucaceresoli.net>
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/rational.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <dt-bindings/media/ds90ub953.h>
+
+#define DS90_NUM_GPIOS			4  /* Physical GPIO pins */
+
+
+#define DS90_REG_DEVICE_ID		0x00
+
+#define DS90_REG_RESET_CTL		0x01
+#define DS90_REG_RESET_CTL_RESTART_AUTOLOAD	BIT(2)
+#define DS90_REG_RESET_CTL_DIGITAL_RESET_1	BIT(1)
+#define DS90_REG_RESET_CTL_DIGITAL_RESET_0	BIT(0)
+
+#define DS90_REG_GENERAL_CFG		0x02
+#define DS90_REG_MODE_SEL		0x03
+#define DS90_REG_BC_MODE_SELECT		0x04
+#define DS90_REG_PLLCLK_CTRL		0x05
+#define DS90_REG_CLKOUT_CTRL0		0x06
+#define DS90_REG_CLKOUT_CTRL1		0x07
+#define DS90_REG_BCC_WATCHDOG		0x08
+#define DS90_REG_I2C_CONTROL1		0x09
+#define DS90_REG_I2C_CONTROL2		0x0A
+#define DS90_REG_SCL_HIGH_TIME		0x0B
+#define DS90_REG_SCL_LOW_TIME		0x0C
+
+#define DS90_REG_LOCAL_GPIO_DATA	0x0D
+#define DS90_REG_LOCAL_GPIO_DATA_RMTEN(n)	BIT((n) + 4)
+#define DS90_REG_LOCAL_GPIO_DATA_OUT_SRC(n)	BIT((n) + 4)
+
+#define DS90_REG_GPIO_INPUT_CTRL	0x0E
+#define DS90_REG_GPIO_INPUT_CTRL_INPUT_EN(n)	BIT((n))
+#define DS90_REG_GPIO_INPUT_CTRL_OUT_EN(n)	BIT((n) + 4)
+
+#define DS90_REG_DVP_CFG		0x10
+#define DS90_REG_DVP_DT			0x11
+#define DS90_REG_FORCE_BIST_ERR		0x13
+#define DS90_REG_REMOTE_BIST_CTRL	0x14
+#define DS90_REG_SENSOR_VGAIN		0x15
+#define DS90_REG_SENSOR_CTRL0		0x17
+#define DS90_REG_SENSOR_CTRL1		0x18
+#define DS90_REG_SENSOR_V0_THRESH	0x19
+#define DS90_REG_SENSOR_V1_THRESH	0x1A
+#define DS90_REG_SENSOR_T_THRESH	0x1B
+#define DS90_REG_SENSOR_T_THRESH	0x1B
+#define DS90_REG_ALARM_CSI_EN		0x1C
+#define DS90_REG_ALARM_SENSE_EN		0x1D
+#define DS90_REG_ALARM_BC_EN		0x1E
+
+#define DS90_REG_CSI_POL_SEL		0x20
+#define DS90_REG_CSI_POL_SEL_POLARITY_CLK0	BIT(4)
+
+#define DS90_REG_CSI_LP_POLARITY	0x21
+#define DS90_REG_CSI_LP_POLARITY_POL_LP_CLK0	BIT(4)
+
+#define DS90_REG_CSI_EN_HSRX		0x22
+#define DS90_REG_CSI_EN_LPRX		0x23
+#define DS90_REG_CSI_EN_RXTERM		0x24
+#define DS90_REG_CSI_PKT_HDR_TINIT_CTRL 0x31
+#define DS90_REG_BCC_CONFIG		0x32
+#define DS90_REG_DATAPATH_CTL1		0x33
+#define DS90_REG_REMOTE_PAR_CAP1	0x35
+#define DS90_REG_DES_ID			0x37
+#define DS90_REG_SLAVE_ID_0		0x39
+#define DS90_REG_SLAVE_ID_1		0x3A
+#define DS90_REG_SLAVE_ID_2		0x3B
+#define DS90_REG_SLAVE_ID_3		0x3C
+#define DS90_REG_SLAVE_ID_4		0x3D
+#define DS90_REG_SLAVE_ID_5		0x3E
+#define DS90_REG_SLAVE_ID_6		0x3F
+#define DS90_REG_SLAVE_ID_7		0x40
+#define DS90_REG_SLAVE_ID_ALIAS_0	0x41
+#define DS90_REG_SLAVE_ID_ALIAS_0	0x41
+#define DS90_REG_SLAVE_ID_ALIAS_1	0x42
+#define DS90_REG_SLAVE_ID_ALIAS_2	0x43
+#define DS90_REG_SLAVE_ID_ALIAS_3	0x44
+#define DS90_REG_SLAVE_ID_ALIAS_4	0x45
+#define DS90_REG_SLAVE_ID_ALIAS_5	0x46
+#define DS90_REG_SLAVE_ID_ALIAS_6	0x47
+#define DS90_REG_SLAVE_ID_ALIAS_7	0x48
+#define DS90_REG_BC_CTRL		0x49
+#define DS90_REG_REV_MASK_ID		0x50
+
+#define DS90_REG_DEVICE_STS		0x51
+#define DS90_REG_DEVICE_STS_CFG_INIT_DONE	BIT(6)
+
+#define DS90_REG_GENERAL_STATUS		0x52
+#define DS90_REG_GPIO_PIN_STS		0x53
+#define DS90_REG_BIST_ERR_CNT		0x54
+#define DS90_REG_CRC_ERR_CNT1		0x55
+#define DS90_REG_CRC_ERR_CNT2		0x56
+#define DS90_REG_SENSOR_STATUS		0x57
+#define DS90_REG_SENSOR_V0		0x58
+#define DS90_REG_SENSOR_V1		0x59
+#define DS90_REG_SENSOR_T		0x5A
+#define DS90_REG_SENSOR_T		0x5A
+#define DS90_REG_CSI_ERR_CNT		0x5C
+#define DS90_REG_CSI_ERR_STATUS		0x5D
+#define DS90_REG_CSI_ERR_DLANE01	0x5E
+#define DS90_REG_CSI_ERR_DLANE23	0x5F
+#define DS90_REG_CSI_ERR_CLK_LANE	0x60
+#define DS90_REG_CSI_PKT_HDR_VC_ID	0x61
+#define DS90_REG_PKT_HDR_WC_LSB		0x62
+#define DS90_REG_PKT_HDR_WC_MSB		0x63
+#define DS90_REG_CSI_ECC		0x64
+#define DS90_REG_IND_ACC_CTL		0xB0
+#define DS90_REG_IND_ACC_ADDR		0xB1
+#define DS90_REG_IND_ACC_DATA		0xB2
+#define DS90_REG_FPD3_RX_ID0		0xF0
+#define DS90_REG_FPD3_RX_ID1		0xF1
+#define DS90_REG_FPD3_RX_ID2		0xF2
+#define DS90_REG_FPD3_RX_ID3		0xF3
+#define DS90_REG_FPD3_RX_ID4		0xF4
+#define DS90_REG_FPD3_RX_ID5		0xF5
+
+struct ds90_data {
+	struct i2c_client      *client;
+	struct clk        *line_rate_clk;
+
+	struct clk_hw      clk_out_hw;
+
+	u32 gpio_func[DS90_NUM_GPIOS];
+	bool inv_clock_pol;
+
+	u64 csi_err_cnt;
+
+	u8 clkout_mul;
+	u8 clkout_div;
+	u8 clkout_ctrl0;
+	u8 clkout_ctrl1;
+};
+
+/* -----------------------------------------------------------------------------
+ * Basic device access
+ */
+static s32 ds90_read(const struct ds90_data *ds90, u8 reg)
+{
+	s32 ret;
+
+	ret = i2c_smbus_read_byte_data(ds90->client, reg);
+	if (ret < 0)
+		dev_err(&ds90->client->dev, "Cannot read register 0x%02x!\n",
+			reg);
+
+	return ret;
+}
+
+static s32 ds90_write(const struct ds90_data *ds90, u8 reg, u8 val)
+{
+	s32 ret;
+
+	ret = i2c_smbus_write_byte_data(ds90->client, reg, val);
+	if (ret < 0)
+		dev_err(&ds90->client->dev, "Cannot write register 0x%02x!\n",
+			reg);
+
+	return ret;
+}
+
+/*
+ * Reset via registers (useful from remote).
+ * Note: the procedure is undocumented, but this one seems to work.
+ */
+static void ds90_soft_reset(struct ds90_data *ds90)
+{
+	int retries = 10;
+	s32 ret;
+
+	while (retries-- > 0) {
+		ret = ds90_write(ds90, DS90_REG_RESET_CTL,
+				 DS90_REG_RESET_CTL_DIGITAL_RESET_1);
+		if (ret >= 0)
+			break;
+		usleep_range(1000, 3000);
+	}
+
+	retries = 10;
+	while (retries-- > 0) {
+		usleep_range(1000, 3000);
+		ret = ds90_read(ds90, DS90_REG_DEVICE_STS);
+		if (ret >= 0 && (ret & DS90_REG_DEVICE_STS_CFG_INIT_DONE))
+			break;
+	}
+}
+
+/* -----------------------------------------------------------------------------
+ * sysfs
+ */
+
+static ssize_t bc_crc_err_cnt_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct ds90_data *ds90 = dev_get_drvdata(dev);
+	s32 lsb = ds90_read(ds90, DS90_REG_CRC_ERR_CNT1);
+	s32 msb = ds90_read(ds90, DS90_REG_CRC_ERR_CNT2);
+	int val;
+
+	if (lsb < 0)
+		return lsb;
+	if (msb < 0)
+		return msb;
+
+	val = (msb << 8) | lsb;
+
+	return sprintf(buf, "%d\n", val);
+}
+
+static ssize_t csi_err_cnt_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct ds90_data *ds90 = dev_get_drvdata(dev);
+	s32 val = ds90_read(ds90, DS90_REG_CSI_ERR_CNT);
+
+	if (val > 0)
+		ds90->csi_err_cnt += val;
+
+	return sprintf(buf, "%llu\n", ds90->csi_err_cnt);
+}
+
+static ssize_t csi_err_status_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct ds90_data *ds90 = dev_get_drvdata(dev);
+	s32 val = ds90_read(ds90, DS90_REG_CSI_ERR_STATUS);
+
+	return sprintf(buf, "0x%02x\n", val);
+}
+
+static DEVICE_ATTR_RO(bc_crc_err_cnt);
+static DEVICE_ATTR_RO(csi_err_cnt);
+static DEVICE_ATTR_RO(csi_err_status);
+
+static struct attribute *ds90_attributes[] = {
+	&dev_attr_bc_crc_err_cnt.attr,
+	&dev_attr_csi_err_cnt.attr,
+	&dev_attr_csi_err_status.attr,
+	NULL
+};
+
+static const struct attribute_group ds90_attr_group = {
+	.attrs		= ds90_attributes,
+};
+
+/* -----------------------------------------------------------------------------
+ * Clock output
+ */
+
+/*
+ * Assume mode 0 "CSI-2 Synchronous mode" (strap, reg 0x03) is always
+ * used. In this mode all clocks are derived from the deserializer. Other
+ * modes are not implemented.
+ */
+
+/*
+ * We always use 4 as a pre-divider (HS_CLK_DIV = 2).
+ *
+ * According to the datasheet:
+ * - "HS_CLK_DIV typically should be set to either 16, 8, or 4 (default)."
+ * - "if it is not possible to have an integer ratio of N/M, it is best to
+ *    select a smaller value for HS_CLK_DIV.
+ *
+ * For above reasons the default HS_CLK_DIV seems the best in the average
+ * case. Use always that value to keep the code simple.
+ */
+static const unsigned long hs_clk_div = 2;
+static const unsigned long prediv = (1 << hs_clk_div);
+
+static unsigned long ds90_clkout_recalc_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	struct ds90_data *ds90 = container_of(hw, struct ds90_data, clk_out_hw);
+	s32 ctrl0 = ds90_read(ds90, DS90_REG_CLKOUT_CTRL0);
+	s32 ctrl1 = ds90_read(ds90, DS90_REG_CLKOUT_CTRL1);
+	unsigned long mul, div, ret;
+
+	if (ctrl0 < 0 || ctrl1 < 0) {
+		// Perhaps link down, use cached values
+		ctrl0 = ds90->clkout_ctrl0;
+		ctrl1 = ds90->clkout_ctrl1;
+	}
+
+	mul = ctrl0 & 0x1f;
+	div = ctrl1 & 0xff;
+
+	if (div == 0)
+		return 0;
+
+	ret = parent_rate / prediv * mul / div;
+
+	return ret;
+}
+
+static long ds90_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *parent_rate)
+{
+	struct ds90_data *ds90 = container_of(hw, struct ds90_data, clk_out_hw);
+	struct device *dev = &ds90->client->dev;
+	unsigned long mul, div, res;
+
+	rational_best_approximation(rate, *parent_rate / prediv,
+				    (1 << 5) - 1, (1 << 8) - 1,
+				    &mul, &div);
+	ds90->clkout_mul = mul;
+	ds90->clkout_div = div;
+
+	res = *parent_rate / prediv * ds90->clkout_mul / ds90->clkout_div;
+
+	dev_dbg(dev, "%lu / %lu * %lu / %lu = %lu (wanted %lu)",
+		*parent_rate, prediv, mul, div, res, rate);
+
+	return res;
+}
+
+static int ds90_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct ds90_data *ds90 = container_of(hw, struct ds90_data, clk_out_hw);
+
+	ds90->clkout_ctrl0 = (hs_clk_div << 5) | ds90->clkout_mul;
+	ds90->clkout_ctrl1 = ds90->clkout_div;
+
+	ds90_write(ds90, DS90_REG_CLKOUT_CTRL0, ds90->clkout_ctrl0);
+	ds90_write(ds90, DS90_REG_CLKOUT_CTRL1, ds90->clkout_ctrl1);
+
+	return 0;
+}
+
+static const struct clk_ops ds90_clkout_ops = {
+	.recalc_rate	= ds90_clkout_recalc_rate,
+	.round_rate	= ds90_clkout_round_rate,
+	.set_rate	= ds90_clkout_set_rate,
+};
+
+static int ds90_register_clkout(struct ds90_data *ds90)
+{
+	struct device *dev = &ds90->client->dev;
+	const char *parent_names[1] = { __clk_get_name(ds90->line_rate_clk) };
+	const struct clk_init_data init = {
+		.name         = kasprintf(GFP_KERNEL, "%s.clk_out", dev_name(dev)),
+		.ops          = &ds90_clkout_ops,
+		.parent_names = parent_names,
+		.num_parents  = 1,
+	};
+	int err;
+
+	ds90->clk_out_hw.init = &init;
+
+	err = devm_clk_hw_register(dev, &ds90->clk_out_hw);
+	kfree(init.name); /* clock framework made a copy of the name */
+	if (err)
+		return dev_err_probe(dev, err, "Cannot register clock HW\n");
+
+	err = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, &ds90->clk_out_hw);
+	if (err)
+		return dev_err_probe(dev, err, "Cannot add OF clock provider\n");
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * GPIOs
+ */
+
+static void ds90_configure_gpios(struct ds90_data *ds90)
+{
+	u8 gpio_input_ctrl = 0;
+	u8 local_gpio_data = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ds90->gpio_func); i++) {
+		switch (ds90->gpio_func[i]) {
+		case DS90_GPIO_FUNC_INPUT:
+			gpio_input_ctrl |= DS90_REG_GPIO_INPUT_CTRL_INPUT_EN(i);
+			break;
+		case DS90_GPIO_FUNC_OUTPUT_REMOTE:
+			gpio_input_ctrl |= DS90_REG_GPIO_INPUT_CTRL_OUT_EN(i);
+			local_gpio_data |= DS90_REG_LOCAL_GPIO_DATA_RMTEN(i);
+			break;
+		}
+	}
+
+	ds90_write(ds90, DS90_REG_LOCAL_GPIO_DATA, local_gpio_data);
+	ds90_write(ds90, DS90_REG_GPIO_INPUT_CTRL, gpio_input_ctrl);
+	/* TODO setting DATAPATH_CTL1 is needed for inputs? */
+}
+
+/* -----------------------------------------------------------------------------
+ * Core
+ */
+
+static int ds90_configure(struct ds90_data *ds90)
+{
+	struct device *dev = &ds90->client->dev;
+	s32 rev_mask;
+	int err;
+
+	rev_mask = ds90_read(ds90, DS90_REG_REV_MASK_ID);
+	if (rev_mask < 0) {
+		err = rev_mask;
+		dev_err(dev, "Cannot read first register (%d), abort\n", err);
+		return err;
+	}
+
+	dev_dbg_once(dev, "rev/mask %02x\n", rev_mask);
+
+	/* I2C fast mode 400 kHz */
+	/* TODO compute values from REFCLK */
+	ds90_write(ds90, DS90_REG_SCL_HIGH_TIME, 0x13);
+	ds90_write(ds90, DS90_REG_SCL_LOW_TIME,  0x26);
+
+	ds90_write(ds90, DS90_REG_CLKOUT_CTRL0, ds90->clkout_ctrl0);
+	ds90_write(ds90, DS90_REG_CLKOUT_CTRL1, ds90->clkout_ctrl1);
+
+	if (ds90->inv_clock_pol) {
+		ds90_write(ds90,
+			   DS90_REG_CSI_POL_SEL,
+			   DS90_REG_CSI_POL_SEL_POLARITY_CLK0);
+		ds90_write(ds90,
+			   DS90_REG_CSI_LP_POLARITY,
+			   DS90_REG_CSI_LP_POLARITY_POL_LP_CLK0);
+	}
+
+	ds90_configure_gpios(ds90);
+
+	return 0;
+}
+
+static int ds90_parse_dt(struct ds90_data *ds90)
+{
+	struct device_node *np = ds90->client->dev.of_node;
+	struct device *dev = &ds90->client->dev;
+	int err;
+	int i;
+
+	if (!np) {
+		dev_err(dev, "OF: no device tree node!\n");
+		return -ENOENT;
+	}
+
+	/* optional, if absent all GPIO pins are unused */
+	err = of_property_read_u32_array(np, "ti,gpio-functions", ds90->gpio_func,
+					ARRAY_SIZE(ds90->gpio_func));
+	if (err && err != -EINVAL)
+		dev_err(dev, "DT: invalid ti,gpio-functions property (%d)", err);
+
+	for (i = 0; i < ARRAY_SIZE(ds90->gpio_func); i++) {
+		if (ds90->gpio_func[i] >= DS90_GPIO_N_FUNCS) {
+			dev_err(dev,
+				"Unknown ti,gpio-functions value %u for GPIO%d of %pOF",
+				ds90->gpio_func[i], i, np);
+			return -EINVAL;
+		}
+	}
+
+	ds90->inv_clock_pol = of_property_read_bool(np, "ti,ds90ub953-q1-clk-inv-pol-quirk");
+
+	return 0;
+}
+
+static int ds90_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct ds90_data *ds90;
+	int err;
+
+	dev_dbg(dev, "probing, addr 0x%02x\n", client->addr);
+
+	ds90 = devm_kzalloc(dev, sizeof(*ds90), GFP_KERNEL);
+	if (!ds90)
+		return -ENOMEM;
+
+	ds90->client = client;
+	i2c_set_clientdata(client, ds90);
+
+	/* Default values for clock multiplier and divider registers */
+	ds90->clkout_ctrl0 = 0x41;
+	ds90->clkout_ctrl1 = 0x28;
+
+	ds90->line_rate_clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(ds90->line_rate_clk))
+		return dev_err_probe(dev, PTR_ERR(ds90->line_rate_clk),
+				     "Cannot get line rate clock\n");
+	dev_dbg(dev, "line rate: %10lu Hz\n", clk_get_rate(ds90->line_rate_clk));
+
+	err = ds90_register_clkout(ds90);
+	if (err)
+		return err;
+
+	err = ds90_parse_dt(ds90);
+	if (err)
+		goto err_parse_dt;
+
+	err = sysfs_create_group(&dev->kobj, &ds90_attr_group);
+	if (err)
+		goto err_sysfs;
+
+	ds90_soft_reset(ds90);
+	ds90_configure(ds90);
+
+	dev_info(dev, "Ready\n");
+
+	return 0;
+
+err_sysfs:
+err_parse_dt:
+	return err;
+}
+
+static int ds90_remove(struct i2c_client *client)
+{
+	dev_info(&client->dev, "Removing\n");
+	return 0;
+}
+
+static const struct i2c_device_id ds90_id[] = {
+	{ "ds90ub953-q1", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ds90_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id ds90_dt_ids[] = {
+	{ .compatible = "ti,ds90ub953-q1", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ds90_dt_ids);
+#endif
+
+static struct i2c_driver ds90ub953_driver = {
+	.probe_new	= ds90_probe,
+	.remove		= ds90_remove,
+	.id_table	= ds90_id,
+	.driver = {
+		.name	= "ds90ub953",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(ds90_dt_ids),
+	},
+};
+
+module_i2c_driver(ds90ub953_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Texas Instruments DS90UB953-Q1 CSI-2 serializer driver");
+MODULE_AUTHOR("Luca Ceresoli <luca@lucaceresoli.net>");