From patchwork Tue Dec 28 16:39:30 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 529364 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 66381C4321E for ; Tue, 28 Dec 2021 16:39:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S236333AbhL1Qjr (ORCPT ); Tue, 28 Dec 2021 11:39:47 -0500 Received: from smtp-relay-internal-1.canonical.com ([185.125.188.123]:49292 "EHLO smtp-relay-internal-1.canonical.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S236199AbhL1Qjn (ORCPT ); Tue, 28 Dec 2021 11:39:43 -0500 Received: from mail-lf1-f72.google.com (mail-lf1-f72.google.com [209.85.167.72]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by smtp-relay-internal-1.canonical.com (Postfix) with ESMTPS id D7C983F1A2 for ; Tue, 28 Dec 2021 16:39:41 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=canonical.com; s=20210705; t=1640709581; bh=/nd1b9Jae+geOuYRS/fP3HNJ5JqXGFVL3LmeNMmkpPM=; h=From:To:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=thqg59fEzO9YJop7YhFr+9cTdo84lBUEX7sI0bTOSEQ5vrTR7eyhuPNqjwoqiSRek Obxwv5g7cirN9OZAGky4lKQLKD8iWK6lokb8FRMyvBPyFNf2m7Z5yaJzGhIVWzkf9L yX9NUyzXnqJBx69EVTxi6oTjoQwqcYI16fZhOzmJba3wFWwiTe7hv+ApaiIjtqkUG8 HlzUhY3TuaOM75MnLkgCmdChvjP+QLdacWTJHlDvrmJAV/88RSyiNN3/FJEQGSEARq fu68mT9U2krrIGUGEZV2Urm9IDg3PgqR9/qgRAdQw+U2Cg0knP644pEmlcY7GCCgq+ N7CChkyzqa4pA== Received: by mail-lf1-f72.google.com with SMTP id h7-20020ac24da7000000b0042521f16f1fso4222482lfe.21 for ; Tue, 28 Dec 2021 08:39:41 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=/nd1b9Jae+geOuYRS/fP3HNJ5JqXGFVL3LmeNMmkpPM=; b=AgcaX8zguGADe4clFHILqFTjUirbNl/bMtVwKBwACXtY0KdJR+6YNSIk+bE0BkCci4 BHg+5Oj/8QS3SCc26cs6XYUPMcO3/vk/aPJ+iMzqCaVxf080xlH4j1U/kazFIUtVIChi xd97gpplRFe2exBqpJiINNo5zDkojbggP64euhN+7O4fThEUGuGLupx82cQKAG5HRPlI cOtjtB2CfQhU5KpkCQCKx4eU+h0rV8eM++vCj7pzCaDmt8EohmeknIZ5Y/2ChwMEizYF ygusSqszd1OZgJAXZT6qUaUeCRAT/GsPjxS6Rs0jQXiAb2AaUlj5IaH1ksMJnF2XwTVD Ekmw== X-Gm-Message-State: AOAM533GQnArR0tY3Eun2Z2ytkBsjCjtzfQx893f4qzhAxQTddsHE3sK B7CzT4+3LxP6/+nMum61Uad67dMY1OrUmF/cYGfbDXF8X5J+bf/bsaz6AwPgfNLgo1Y8H2N+YPr ta6ffvBxhyHpqz9A2XFCYe7E6aNemWMWp4OkkqhU= X-Received: by 2002:a2e:f1a:: with SMTP id 26mr19003589ljp.480.1640709581114; Tue, 28 Dec 2021 08:39:41 -0800 (PST) X-Google-Smtp-Source: ABdhPJxwxNFto0SNwbMZEahleTnhZaXIfwwshjO3MvnBn4RSsv/mZhmGKYo00nnozjxHNwUD3q90nw== X-Received: by 2002:a2e:f1a:: with SMTP id 26mr19003567ljp.480.1640709580801; Tue, 28 Dec 2021 08:39:40 -0800 (PST) Received: from krzk-bin.lan (89-77-68-124.dynamic.chello.pl. [89.77.68.124]) by smtp.gmail.com with ESMTPSA id d3sm1972876lfs.204.2021.12.28.08.39.39 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 28 Dec 2021 08:39:40 -0800 (PST) From: Krzysztof Kozlowski To: Chanwoo Choi , Krzysztof Kozlowski , Bartlomiej Zolnierkiewicz , Pavel Machek , Rob Herring , Lee Jones , Sebastian Reichel , Liam Girdwood , Mark Brown , linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org Subject: [PATCH 4/4] dt-bindings: mfd: maxim,max77693: convert to dtschema Date: Tue, 28 Dec 2021 17:39:30 +0100 Message-Id: <20211228163930.35524-5-krzysztof.kozlowski@canonical.com> X-Mailer: git-send-email 2.32.0 In-Reply-To: <20211228163930.35524-1-krzysztof.kozlowski@canonical.com> References: <20211228163930.35524-1-krzysztof.kozlowski@canonical.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Convert the MFD part of Maxim MAX77693 MUIC to DT schema format. The example DTS was copied from existing DTS (exynos4412-midas.dtsi), so keep the license as GPL-2.0-only. Signed-off-by: Krzysztof Kozlowski --- .../devicetree/bindings/mfd/max77693.txt | 194 ------------------ .../bindings/mfd/maxim,max77693.yaml | 139 +++++++++++++ MAINTAINERS | 2 +- 3 files changed, 140 insertions(+), 195 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/max77693.txt create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77693.yaml diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt deleted file mode 100644 index 1032df14498b..000000000000 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ /dev/null @@ -1,194 +0,0 @@ -Maxim MAX77693 multi-function device - -MAX77693 is a Multifunction device with the following submodules: -- PMIC, -- CHARGER, -- LED, -- MUIC, -- HAPTIC - -It is interfaced to host controller using i2c. -This document describes the bindings for the mfd device. - -Required properties: -- compatible : Must be "maxim,max77693". -- reg : Specifies the i2c slave address of PMIC block. -- interrupts : This i2c device has an IRQ line connected to the main SoC. - -Optional properties: -- regulators : The regulators of max77693 have to be instantiated under subnode - named "regulators" using the following format. - - regulators { - regulator-compatible = ESAFEOUT1/ESAFEOUT2/CHARGER - standard regulator constraints[*]. - }; - - [*] refer Documentation/devicetree/bindings/regulator/regulator.txt - -- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide - users with tactile feedback. PWM period and duty-cycle are varied in - order to provide the appropriate level of feedback. - - Required properties: - - compatible : Must be "maxim,max77693-haptic" - - haptic-supply : power supply for the haptic motor - [*] refer Documentation/devicetree/bindings/regulator/regulator.txt - - pwms : phandle to the physical PWM(Pulse Width Modulation) device. - PWM properties should be named "pwms". And number of cell is different - for each pwm device. - To get more information, please refer to documentation. - [*] refer Documentation/devicetree/bindings/pwm/pwm.txt - -- charger : Node configuring the charger driver. - If present, required properties: - - compatible : Must be "maxim,max77693-charger". - - Optional properties (if not set, defaults will be used): - - maxim,constant-microvolt : Battery constant voltage in uV. The charger - will operate in fast charge constant current mode till battery voltage - reaches this level. Then the charger will switch to fast charge constant - voltage mode. Also vsys (system voltage) will be set to this value when - DC power is supplied but charger is not enabled. - Valid values: 3650000 - 4400000, step by 25000 (rounded down) - Default: 4200000 - - - maxim,min-system-microvolt : Minimal system voltage in uV. - Valid values: 3000000 - 3700000, step by 100000 (rounded down) - Default: 3600000 - - - maxim,thermal-regulation-celsius : Temperature in Celsius for entering - high temperature charging mode. If die temperature exceeds this value - the charging current will be reduced by 105 mA/Celsius. - Valid values: 70, 85, 100, 115 - Default: 100 - - - maxim,battery-overcurrent-microamp : Overcurrent protection threshold - in uA (current from battery to system). - Valid values: 2000000 - 3500000, step by 250000 (rounded down) - Default: 3500000 - - - maxim,charge-input-threshold-microvolt : Threshold voltage in uV for - triggering input voltage regulation loop. If input voltage decreases - below this value, the input current will be reduced to reach the - threshold voltage. - Valid values: 4300000, 4700000, 4800000, 4900000 - Default: 4300000 - -- led : the LED submodule device node - -There are two LED outputs available - FLED1 and FLED2. Each of them can -control a separate LED or they can be connected together to double -the maximum current for a single connected LED. One LED is represented -by one child node. - -Required properties: -- compatible : Must be "maxim,max77693-led". - -Optional properties: -- maxim,boost-mode : - In boost mode the device can produce up to 1.2A of total current - on both outputs. The maximum current on each output is reduced - to 625mA then. If not enabled explicitly, boost setting defaults to - LEDS_BOOST_FIXED in case both current sources are used. - Possible values: - LEDS_BOOST_OFF (0) - no boost, - LEDS_BOOST_ADAPTIVE (1) - adaptive mode, - LEDS_BOOST_FIXED (2) - fixed mode. -- maxim,boost-mvout : Output voltage of the boost module in millivolts. - Valid values: 3300 - 5500, step by 25 (rounded down) - Default: 3300 -- maxim,mvsys-min : Low input voltage level in millivolts. Flash is not fired - if chip estimates that system voltage could drop below this level due - to flash power consumption. - Valid values: 2400 - 3400, step by 33 (rounded down) - Default: 2400 - -Required properties for the LED child node: -- led-sources : see Documentation/devicetree/bindings/leds/common.txt; - device current output identifiers: 0 - FLED1, 1 - FLED2 -- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - Valid values for a LED connected to one FLED output: - 15625 - 250000, step by 15625 (rounded down) - Valid values for a LED connected to both FLED outputs: - 15625 - 500000, step by 15625 (rounded down) -- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt - Valid values for a single LED connected to one FLED output - (boost mode must be turned off): - 15625 - 1000000, step by 15625 (rounded down) - Valid values for a single LED connected to both FLED outputs: - 15625 - 1250000, step by 15625 (rounded down) - Valid values for two LEDs case: - 15625 - 625000, step by 15625 (rounded down) -- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt - Valid values: 62500 - 1000000, step by 62500 (rounded down) - -Optional properties for the LED child node: -- label : see Documentation/devicetree/bindings/leds/common.txt - -Optional nodes: -- max77693-muic : - Node used only by extcon consumers. - Required properties: - - compatible : "maxim,max77693-muic" - -Example: -#include - - max77693@66 { - compatible = "maxim,max77693"; - reg = <0x66>; - interrupt-parent = <&gpx1>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; - - regulators { - esafeout@1 { - regulator-compatible = "ESAFEOUT1"; - regulator-name = "ESAFEOUT1"; - regulator-boot-on; - }; - esafeout@2 { - regulator-compatible = "ESAFEOUT2"; - regulator-name = "ESAFEOUT2"; - }; - charger@0 { - regulator-compatible = "CHARGER"; - regulator-name = "CHARGER"; - regulator-min-microamp = <60000>; - regulator-max-microamp = <2580000>; - regulator-boot-on; - }; - }; - - haptic { - compatible = "maxim,max77693-haptic"; - haptic-supply = <&haptic_supply>; - pwms = <&pwm 0 40000 0>; - pwm-names = "haptic"; - }; - - charger { - compatible = "maxim,max77693-charger"; - - maxim,constant-microvolt = <4200000>; - maxim,min-system-microvolt = <3600000>; - maxim,thermal-regulation-celsius = <75>; - maxim,battery-overcurrent-microamp = <3000000>; - maxim,charge-input-threshold-microvolt = <4300000>; - }; - - led { - compatible = "maxim,max77693-led"; - maxim,boost-mode = ; - maxim,boost-mvout = <5000>; - maxim,mvsys-min = <2400>; - - camera_flash: flash-led { - label = "max77693-flash"; - led-sources = <0>, <1>; - led-max-microamp = <500000>; - flash-max-microamp = <1250000>; - flash-max-timeout-us = <1000000>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml new file mode 100644 index 000000000000..bc9c90bd4ff9 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/maxim,max77693.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max77693.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX77693 MicroUSB and Companion Power Management IC + +maintainers: + - Chanwoo Choi + - Krzysztof Kozlowski + +description: | + This is a part of device tree bindings for Maxim MAX77693 MicroUSB + Integrated Circuit (MUIC). + + The Maxim MAX77693 is a MicroUSB and Companion Power Management IC which + includes voltage current regulators, charger, LED/flash, haptic motor driver + and MicroUSB management IC. + +properties: + compatible: + const: maxim,max77693 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + charger: + $ref: ../power/supply/maxim,max77693.yaml + + led: + $ref: ../leds/maxim,max77693.yaml + + max77693-muic: + type: object + properties: + compatible: + const: maxim,max77693-muic + + required: + - compatible + + motor-driver: + type: object + properties: + compatible: + const: maxim,max77693-haptic + + haptic-supply: + description: Power supply to the haptic motor + + pwms: + maxItems: 1 + + required: + - compatible + - haptic-supply + - pwms + + regulators: + $ref: ../regulator/maxim,max77693.yaml + description: + List of child nodes that specify the regulators. + +required: + - compatible + - interrupts + - reg + +additionalProperties: false + +examples: + - | + #include + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "maxim,max77693"; + reg = <0x66>; + interrupt-parent = <&gpx1>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + + regulators { + ESAFEOUT1 { + regulator-name = "ESAFEOUT1"; + }; + + ESAFEOUT2 { + regulator-name = "ESAFEOUT2"; + }; + + CHARGER { + regulator-name = "CHARGER"; + regulator-min-microamp = <60000>; + regulator-max-microamp = <2580000>; + }; + }; + + motor-driver { + compatible = "maxim,max77693-haptic"; + haptic-supply = <&ldo26_reg>; + pwms = <&pwm 0 38022 0>; + }; + + charger { + compatible = "maxim,max77693-charger"; + + maxim,constant-microvolt = <4350000>; + maxim,min-system-microvolt = <3600000>; + maxim,thermal-regulation-celsius = <100>; + maxim,battery-overcurrent-microamp = <3500000>; + maxim,charge-input-threshold-microvolt = <4300000>; + }; + + led { + compatible = "maxim,max77693-led"; + maxim,boost-mode = ; + maxim,boost-mvout = <5000>; + maxim,mvsys-min = <2400>; + + flash-led { + label = "max77693-flash"; + function = LED_FUNCTION_FLASH; + color = ; + led-sources = <0>, <1>; + led-max-microamp = <500000>; + flash-max-microamp = <1250000>; + flash-max-timeout-us = <1000000>; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index ead08768fb78..e5f2758531bc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11692,9 +11692,9 @@ M: Bartlomiej Zolnierkiewicz L: linux-kernel@vger.kernel.org S: Supported F: Documentation/devicetree/bindings/*/maxim,max77686.yaml +F: Documentation/devicetree/bindings/*/maxim,max77693.yaml F: Documentation/devicetree/bindings/clock/maxim,max77686.txt F: Documentation/devicetree/bindings/mfd/max14577.txt -F: Documentation/devicetree/bindings/mfd/max77693.txt F: drivers/*/max14577*.c F: drivers/*/max77686*.c F: drivers/*/max77693*.c