diff mbox series

[10/34] brcmfmac: firmware: Allow platform to override macaddr

Message ID 20211226153624.162281-11-marcan@marcan.st
State Accepted
Commit 687f767d6fab448e4e80011cf5230cd021135bfb
Headers show
Series brcmfmac: Support Apple T2 and M1 platforms | expand

Commit Message

Hector Martin Dec. 26, 2021, 3:36 p.m. UTC
On Device Tree platforms, it is customary to be able to set the MAC
address via the Device Tree, as it is often stored in system firmware.
This is particularly relevant for Apple ARM64 platforms, where this
information comes from system configuration and passed through by the
bootloader into the DT.

Implement support for this by fetching the platform MAC address and
adding or replacing the macaddr= property in nvram. This becomes the
dongle's default MAC address.

On platforms with an SROM MAC address, this overrides it. On platforms
without one, such as Apple ARM64 devices, this is required for the
firmware to boot (it will fail if it does not have a valid MAC at all).

Signed-off-by: Hector Martin <marcan@marcan.st>
---
 .../broadcom/brcm80211/brcmfmac/firmware.c    | 30 +++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

Comments

Linus Walleij Jan. 2, 2022, 5:50 a.m. UTC | #1
On Sun, Dec 26, 2021 at 4:37 PM Hector Martin <marcan@marcan.st> wrote:

> On Device Tree platforms, it is customary to be able to set the MAC
> address via the Device Tree, as it is often stored in system firmware.
> This is particularly relevant for Apple ARM64 platforms, where this
> information comes from system configuration and passed through by the
> bootloader into the DT.
>
> Implement support for this by fetching the platform MAC address and
> adding or replacing the macaddr= property in nvram. This becomes the
> dongle's default MAC address.
>
> On platforms with an SROM MAC address, this overrides it. On platforms
> without one, such as Apple ARM64 devices, this is required for the
> firmware to boot (it will fail if it does not have a valid MAC at all).
>
> Signed-off-by: Hector Martin <marcan@marcan.st>

This looks very helpful.

> +       /* Add space for properties we may add */
> +       size += strlen(BRCMF_FW_DEFAULT_BOARDREV) + 1;
> +       size += BRCMF_FW_MACADDR_LEN + 1;

Add some note to the commit log why you also make space for
boardrev? (Looks useful.) Is the boardrev spacing in the right
patch?

With that addressed:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
Hector Martin Jan. 3, 2022, 5:42 a.m. UTC | #2
On 2022/01/02 14:50, Linus Walleij wrote:
> On Sun, Dec 26, 2021 at 4:37 PM Hector Martin <marcan@marcan.st> wrote:
> 
>> On Device Tree platforms, it is customary to be able to set the MAC
>> address via the Device Tree, as it is often stored in system firmware.
>> This is particularly relevant for Apple ARM64 platforms, where this
>> information comes from system configuration and passed through by the
>> bootloader into the DT.
>>
>> Implement support for this by fetching the platform MAC address and
>> adding or replacing the macaddr= property in nvram. This becomes the
>> dongle's default MAC address.
>>
>> On platforms with an SROM MAC address, this overrides it. On platforms
>> without one, such as Apple ARM64 devices, this is required for the
>> firmware to boot (it will fail if it does not have a valid MAC at all).
>>
>> Signed-off-by: Hector Martin <marcan@marcan.st>
> 
> This looks very helpful.
> 
>> +       /* Add space for properties we may add */
>> +       size += strlen(BRCMF_FW_DEFAULT_BOARDREV) + 1;
>> +       size += BRCMF_FW_MACADDR_LEN + 1;
> 
> Add some note to the commit log why you also make space for
> boardrev? (Looks useful.) Is the boardrev spacing in the right
> patch?

Ah, that was a drive-by fix. While adding the MACADDR space I noticed we
weren't allocating space for BOARDREV... not sure if any platforms hit
this; it would cause an overflow if there are platforms with no
board_rev in the nvram that also don't have enough comments/junk to
otherwise make space for it.

I'll move it to another patch so it's more evident, and it should get a
Fixes: too.
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
index 51d5d2b88ee6..d3834d5bc9ea 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -21,6 +21,8 @@ 
 #define BRCMF_FW_NVRAM_DEVPATH_LEN		19	/* devpath0=pcie/1/4/ */
 #define BRCMF_FW_NVRAM_PCIEDEV_LEN		10	/* pcie/1/4/ + \0 */
 #define BRCMF_FW_DEFAULT_BOARDREV		"boardrev=0xff"
+#define BRCMF_FW_MACADDR_FMT			"macaddr=%pM"
+#define BRCMF_FW_MACADDR_LEN			(7 + ETH_ALEN * 3)
 
 enum nvram_parser_state {
 	IDLE,
@@ -57,6 +59,7 @@  struct nvram_parser {
 	bool multi_dev_v1;
 	bool multi_dev_v2;
 	bool boardrev_found;
+	bool strip_mac;
 };
 
 /*
@@ -121,6 +124,10 @@  static enum nvram_parser_state brcmf_nvram_handle_key(struct nvram_parser *nvp)
 			nvp->multi_dev_v2 = true;
 		if (strncmp(&nvp->data[nvp->entry], "boardrev", 8) == 0)
 			nvp->boardrev_found = true;
+		/* strip macaddr if platform MAC overrides */
+		if (nvp->strip_mac &&
+		    strncmp(&nvp->data[nvp->entry], "macaddr", 7) == 0)
+			st = COMMENT;
 	} else if (!is_nvram_char(c) || c == ' ') {
 		brcmf_dbg(INFO, "warning: ln=%d:col=%d: '=' expected, skip invalid key entry\n",
 			  nvp->line, nvp->column);
@@ -207,6 +214,9 @@  static int brcmf_init_nvram_parser(struct nvram_parser *nvp,
 		size = BRCMF_FW_MAX_NVRAM_SIZE;
 	else
 		size = data_len;
+	/* Add space for properties we may add */
+	size += strlen(BRCMF_FW_DEFAULT_BOARDREV) + 1;
+	size += BRCMF_FW_MACADDR_LEN + 1;
 	/* Alloc for extra 0 byte + roundup by 4 + length field */
 	size += 1 + 3 + sizeof(u32);
 	nvp->nvram = kzalloc(size, GFP_KERNEL);
@@ -366,22 +376,34 @@  static void brcmf_fw_add_defaults(struct nvram_parser *nvp)
 	nvp->nvram_len++;
 }
 
+static void brcmf_fw_add_macaddr(struct nvram_parser *nvp, u8 *mac)
+{
+	snprintf(&nvp->nvram[nvp->nvram_len], BRCMF_FW_MACADDR_LEN + 1,
+		 BRCMF_FW_MACADDR_FMT, mac);
+	nvp->nvram_len += BRCMF_FW_MACADDR_LEN + 1;
+}
+
 /* brcmf_nvram_strip :Takes a buffer of "<var>=<value>\n" lines read from a fil
  * and ending in a NUL. Removes carriage returns, empty lines, comment lines,
  * and converts newlines to NULs. Shortens buffer as needed and pads with NULs.
  * End of buffer is completed with token identifying length of buffer.
  */
 static void *brcmf_fw_nvram_strip(const u8 *data, size_t data_len,
-				  u32 *new_length, u16 domain_nr, u16 bus_nr)
+				  u32 *new_length, u16 domain_nr, u16 bus_nr,
+				  struct device *dev)
 {
 	struct nvram_parser nvp;
 	u32 pad;
 	u32 token;
 	__le32 token_le;
+	u8 mac[ETH_ALEN];
 
 	if (brcmf_init_nvram_parser(&nvp, data, data_len) < 0)
 		return NULL;
 
+	if (eth_platform_get_mac_address(dev, mac) == 0)
+		nvp.strip_mac = true;
+
 	while (nvp.pos < data_len) {
 		nvp.state = nv_parser_states[nvp.state](&nvp);
 		if (nvp.state == END)
@@ -402,6 +424,9 @@  static void *brcmf_fw_nvram_strip(const u8 *data, size_t data_len,
 
 	brcmf_fw_add_defaults(&nvp);
 
+	if (nvp.strip_mac)
+		brcmf_fw_add_macaddr(&nvp, mac);
+
 	pad = nvp.nvram_len;
 	*new_length = roundup(nvp.nvram_len + 1, 4);
 	while (pad != *new_length) {
@@ -546,7 +571,8 @@  static int brcmf_fw_request_nvram_done(const struct firmware *fw, void *ctx)
 	if (data)
 		nvram = brcmf_fw_nvram_strip(data, data_len, &nvram_length,
 					     fwctx->req->domain_nr,
-					     fwctx->req->bus_nr);
+					     fwctx->req->bus_nr,
+					     fwctx->dev);
 
 	if (free_bcm47xx_nvram)
 		bcm47xx_nvram_release_contents(data);