From patchwork Fri Dec 17 21:36:17 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lucas Stach X-Patchwork-Id: 525155 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id CAB4EC4332F for ; Fri, 17 Dec 2021 21:36:22 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229600AbhLQVgW (ORCPT ); Fri, 17 Dec 2021 16:36:22 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58232 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229768AbhLQVgW (ORCPT ); Fri, 17 Dec 2021 16:36:22 -0500 Received: from metis.ext.pengutronix.de (metis.ext.pengutronix.de [IPv6:2001:67c:670:201:290:27ff:fe1d:cc33]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CA77FC06173E for ; Fri, 17 Dec 2021 13:36:21 -0800 (PST) Received: from dude03.red.stw.pengutronix.de ([2a0a:edc0:0:1101:1d::39]) by metis.ext.pengutronix.de with esmtp (Exim 4.92) (envelope-from ) id 1myKtn-00064s-95; Fri, 17 Dec 2021 22:36:19 +0100 From: Lucas Stach To: Shawn Guo Cc: Pengutronix Kernel Team , NXP Linux Team , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, patchwork-lst@pengutronix.de Subject: [PATCH v2 2/2] arm64: dts: imx: add Protonic PRT8MM board Date: Fri, 17 Dec 2021 22:36:17 +0100 Message-Id: <20211217213617.3793534-2-l.stach@pengutronix.de> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20211217213617.3793534-1-l.stach@pengutronix.de> References: <20211217213617.3793534-1-l.stach@pengutronix.de> MIME-Version: 1.0 X-SA-Exim-Connect-IP: 2a0a:edc0:0:1101:1d::39 X-SA-Exim-Mail-From: l.stach@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: devicetree@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: David Jander The Protonic PRT8MM is a low-cost agricultural Virtual Terminal. This commit adds most of the board functionality sans the display output, as the i.MX8MM display support isn't ready yet. Signed-off-by: David Jander Signed-off-by: Lucas Stach --- .../boot/dts/freescale/imx8mm-prt8mm.dts | 304 ++++++++++++++++++ 1 file changed, 304 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts diff --git a/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts new file mode 100644 index 000000000000..13330ad67760 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-prt8mm.dts @@ -0,0 +1,304 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2020 Protonic Holland + * Copyright 2019 NXP + */ + +/dts-v1/; + +#include +#include "imx8mm.dtsi" + +/ { + model = "Protonic PRT8MM"; + compatible = "prt,prt8mm", "fsl,imx8mm"; + + chosen { + stdout-path = &uart4; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0x0 0x40000000 0 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + debug-led0 { + label = "DEBUG_LED0"; + gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + + debug-led1 { + label = "DEBUG_LED1"; + gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "cpu"; + }; + }; + + sound-ssm2518 { + compatible = "simple-audio-card"; + simple-audio-card,name = "ssm2518-audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,frame-master = <&cpudai>; + simple-audio-card,bitclock-master = <&cpudai>; + + cpudai: simple-audio-card,cpu { + sound-dai = <&sai3>; + }; + + simple-audio-card,codec { + sound-dai = <&ssm2518>; + clocks = <&clk IMX8MM_CLK_SAI3_ROOT>; + }; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + ssm2518: audio-codec@34 { + compatible = "adi,ssm2518"; + reg = <0x34>; + #sound-dai-cells = <0>; + }; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + regulator@60 { + compatible = "fcs,fan53555"; + reg = <0x60>; + regulator-name = "0V9_CORE"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <980000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&i2c3 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf85363"; + reg = <0x51>; + }; + + temp-sense@70 { + compatible = "ti,tmp103"; + reg = <0x70>; + }; + + touchscreeen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touchscreen>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_NONE>; + irq-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; +}; + +&sai3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&clk IMX8MM_CLK_SAI3>; + assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>; + assigned-clock-rates = <12288000>; + fsl,sai-mclk-direction-output; + fsl,sai-asynchronous; + status = "okay"; +}; + +&snvs_pwrkey { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + dr_mode = "host"; + disable-over-current; + power-active-high; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC2>; + assigned-clock-rates = <100000000>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_gpio_leds: ledsgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_GPIO3_IO0 0x00 + MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1 0x00 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400000c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400000c3 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400000c3 + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400000c3 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400000c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400000c3 + >; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC 0xd6 + MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK 0xd6 + MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK 0xd6 + MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0 0xd6 + >; + }; + + pinctrl_touchscreen: tsgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x80 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x80 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX 0x040 + MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX 0x040 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR 0x000 + MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x000 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x0d4 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +};