@@ -12,32 +12,9 @@ used by all apr services. Must contain the following properties.
from DSP.
example "qcom,q6afe"
-= AFE CLOCKSS
-"clocks" subnode of the AFE node. It represents q6afe clocks
-"clocks" node should have following properties.
-- compatible:
- Usage: required
- Value type: <stringlist>
- Definition: must be "qcom,q6afe-clocks"
-
-- #clock-cells:
- Usage: required
- Value type: <u32>
- Definition: Must be 2. Clock Id followed by
- below valid clock coupling attributes.
- 1 - for no coupled clock
- 2 - for dividend of the coupled clock
- 3 - for divisor of the coupled clock
- 4 - for inverted and no couple clock
-
= EXAMPLE
apr-service@4 {
compatible = "qcom,q6afe";
reg = <APR_SVC_AFE>;
-
- clocks {
- compatible = "qcom,q6afe-clocks";
- #clock-cells = <2>;
- };
};
new file mode 100644
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/sound/qcom,q6dsp-lpass-clocks.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm DSP LPASS Clock Controller binding
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+ This binding describes the Qualcomm DSP Clock Controller
+
+properties:
+ compatible:
+ enum:
+ - qcom,q6afe-clocks
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 2
+ description:
+ Clock Id is followed by clock coupling attributes.
+ 1 = for no coupled clock
+ 2 = for dividend of the coupled clock
+ 3 = for divisor of the coupled clock
+ 4 = for inverted and no couple clock
+
+required:
+ - compatible
+ - reg
+ - "#clock-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/soc/qcom,apr.h>
+ #include <dt-bindings/sound/qcom,q6afe.h>
+ apr {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ apr-service@4 {
+ reg = <APR_SVC_AFE>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ q6afecc@2 {
+ compatible = "qcom,q6afe-clocks";
+ reg = <2>;
+ #clock-cells = <2>;
+ };
+ };
+ };