diff mbox series

[v5,04/15] iio: adc: aspeed: Keep model data to driver data.

Message ID 20210831071458.2334-5-billy_tsai@aspeedtech.com
State Superseded
Headers show
Series Add support for ast2600 ADC | expand

Commit Message

Billy Tsai Aug. 31, 2021, 7:14 a.m. UTC
Keep the model data pointer to driver data for reducing the usage of
of_device_get_match_data().

Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
---
 drivers/iio/adc/aspeed_adc.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)

Comments

Jonathan Cameron Sept. 5, 2021, 2:33 p.m. UTC | #1
On Tue, 31 Aug 2021 15:14:47 +0800
Billy Tsai <billy_tsai@aspeedtech.com> wrote:

> Keep the model data pointer to driver data for reducing the usage of

> of_device_get_match_data().

> 

> Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>

This one starts to be impacted by the fix (as its in the context).
Rather than making a mess of things for linux-next etc I'll hold
off on these until that fix is upstream in a few weeks.

If I seem to have lost it (it's been known to happen :( ) then
feel free to poke me!

Thanks,

Jonathan
> ---

>  drivers/iio/adc/aspeed_adc.c | 20 +++++++-------------

>  1 file changed, 7 insertions(+), 13 deletions(-)

> 

> diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c

> index f055fe7b2c40..76ae1c3f584b 100644

> --- a/drivers/iio/adc/aspeed_adc.c

> +++ b/drivers/iio/adc/aspeed_adc.c

> @@ -77,6 +77,7 @@ struct aspeed_adc_model_data {

>  

>  struct aspeed_adc_data {

>  	struct device		*dev;

> +	const struct aspeed_adc_model_data *model_data;

>  	void __iomem		*base;

>  	spinlock_t		clk_lock;

>  	struct clk_hw		*clk_prescaler;

> @@ -118,8 +119,6 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev,

>  			       int *val, int *val2, long mask)

>  {

>  	struct aspeed_adc_data *data = iio_priv(indio_dev);

> -	const struct aspeed_adc_model_data *model_data =

> -			of_device_get_match_data(data->dev);

>  

>  	switch (mask) {

>  	case IIO_CHAN_INFO_RAW:

> @@ -127,7 +126,7 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev,

>  		return IIO_VAL_INT;

>  

>  	case IIO_CHAN_INFO_SCALE:

> -		*val = model_data->vref_voltage;

> +		*val = data->model_data->vref_voltage;

>  		*val2 = ASPEED_RESOLUTION_BITS;

>  		return IIO_VAL_FRACTIONAL_LOG2;

>  

> @@ -146,13 +145,11 @@ static int aspeed_adc_write_raw(struct iio_dev *indio_dev,

>  				int val, int val2, long mask)

>  {

>  	struct aspeed_adc_data *data = iio_priv(indio_dev);

> -	const struct aspeed_adc_model_data *model_data =

> -			of_device_get_match_data(data->dev);

>  

>  	switch (mask) {

>  	case IIO_CHAN_INFO_SAMP_FREQ:

> -		if (val < model_data->min_sampling_rate ||

> -			val > model_data->max_sampling_rate)

> +		if (val < data->model_data->min_sampling_rate ||

> +			val > data->model_data->max_sampling_rate)

>  			return -EINVAL;

>  

>  		clk_set_rate(data->clk_scaler->clk,

> @@ -198,7 +195,6 @@ static int aspeed_adc_probe(struct platform_device *pdev)

>  {

>  	struct iio_dev *indio_dev;

>  	struct aspeed_adc_data *data;

> -	const struct aspeed_adc_model_data *model_data;

>  	const char *clk_parent_name;

>  	int ret;

>  	u32 adc_engine_control_reg_val;

> @@ -209,6 +205,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)

>  

>  	data = iio_priv(indio_dev);

>  	data->dev = &pdev->dev;

> +	data->model_data = of_device_get_match_data(&pdev->dev);

>  	platform_set_drvdata(pdev, indio_dev);

>  

>  	data->base = devm_platform_ioremap_resource(pdev, 0);

> @@ -249,9 +246,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)

>  	}

>  	reset_control_deassert(data->rst);

>  

> -	model_data = of_device_get_match_data(&pdev->dev);

> -

> -	if (model_data->wait_init_sequence) {

> +	if (data->model_data->wait_init_sequence) {

>  		/* Enable engine in normal mode. */

>  		writel(FIELD_PREP(ASPEED_ADC_OP_MODE,

>  				  ASPEED_ADC_OP_MODE_NORMAL) |

> @@ -281,8 +276,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)

>  	writel(adc_engine_control_reg_val,

>  	       data->base + ASPEED_REG_ENGINE_CONTROL);

>  

> -	model_data = of_device_get_match_data(&pdev->dev);

> -	indio_dev->name = model_data->model_name;

> +	indio_dev->name = data->model_data->model_name;

>  	indio_dev->info = &aspeed_adc_iio_info;

>  	indio_dev->modes = INDIO_DIRECT_MODE;

>  	indio_dev->channels = aspeed_adc_iio_channels;
Jonathan Cameron Sept. 5, 2021, 2:50 p.m. UTC | #2
On Sun, 5 Sep 2021 15:33:39 +0100
Jonathan Cameron <jic23@kernel.org> wrote:

> On Tue, 31 Aug 2021 15:14:47 +0800

> Billy Tsai <billy_tsai@aspeedtech.com> wrote:

> 

> > Keep the model data pointer to driver data for reducing the usage of

> > of_device_get_match_data().

> > 

> > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>  

> This one starts to be impacted by the fix (as its in the context).

> Rather than making a mess of things for linux-next etc I'll hold

> off on these until that fix is upstream in a few weeks.

> 

> If I seem to have lost it (it's been known to happen :( ) then

> feel free to poke me!


Having taken another look at the rest of the series (and Philipp's review)
please do a v6 starting from this patch.

Thanks,
Jonathan

> 

> Thanks,

> 

> Jonathan

> > ---

> >  drivers/iio/adc/aspeed_adc.c | 20 +++++++-------------

> >  1 file changed, 7 insertions(+), 13 deletions(-)

> > 

> > diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c

> > index f055fe7b2c40..76ae1c3f584b 100644

> > --- a/drivers/iio/adc/aspeed_adc.c

> > +++ b/drivers/iio/adc/aspeed_adc.c

> > @@ -77,6 +77,7 @@ struct aspeed_adc_model_data {

> >  

> >  struct aspeed_adc_data {

> >  	struct device		*dev;

> > +	const struct aspeed_adc_model_data *model_data;

> >  	void __iomem		*base;

> >  	spinlock_t		clk_lock;

> >  	struct clk_hw		*clk_prescaler;

> > @@ -118,8 +119,6 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev,

> >  			       int *val, int *val2, long mask)

> >  {

> >  	struct aspeed_adc_data *data = iio_priv(indio_dev);

> > -	const struct aspeed_adc_model_data *model_data =

> > -			of_device_get_match_data(data->dev);

> >  

> >  	switch (mask) {

> >  	case IIO_CHAN_INFO_RAW:

> > @@ -127,7 +126,7 @@ static int aspeed_adc_read_raw(struct iio_dev *indio_dev,

> >  		return IIO_VAL_INT;

> >  

> >  	case IIO_CHAN_INFO_SCALE:

> > -		*val = model_data->vref_voltage;

> > +		*val = data->model_data->vref_voltage;

> >  		*val2 = ASPEED_RESOLUTION_BITS;

> >  		return IIO_VAL_FRACTIONAL_LOG2;

> >  

> > @@ -146,13 +145,11 @@ static int aspeed_adc_write_raw(struct iio_dev *indio_dev,

> >  				int val, int val2, long mask)

> >  {

> >  	struct aspeed_adc_data *data = iio_priv(indio_dev);

> > -	const struct aspeed_adc_model_data *model_data =

> > -			of_device_get_match_data(data->dev);

> >  

> >  	switch (mask) {

> >  	case IIO_CHAN_INFO_SAMP_FREQ:

> > -		if (val < model_data->min_sampling_rate ||

> > -			val > model_data->max_sampling_rate)

> > +		if (val < data->model_data->min_sampling_rate ||

> > +			val > data->model_data->max_sampling_rate)

> >  			return -EINVAL;

> >  

> >  		clk_set_rate(data->clk_scaler->clk,

> > @@ -198,7 +195,6 @@ static int aspeed_adc_probe(struct platform_device *pdev)

> >  {

> >  	struct iio_dev *indio_dev;

> >  	struct aspeed_adc_data *data;

> > -	const struct aspeed_adc_model_data *model_data;

> >  	const char *clk_parent_name;

> >  	int ret;

> >  	u32 adc_engine_control_reg_val;

> > @@ -209,6 +205,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)

> >  

> >  	data = iio_priv(indio_dev);

> >  	data->dev = &pdev->dev;

> > +	data->model_data = of_device_get_match_data(&pdev->dev);

> >  	platform_set_drvdata(pdev, indio_dev);

> >  

> >  	data->base = devm_platform_ioremap_resource(pdev, 0);

> > @@ -249,9 +246,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)

> >  	}

> >  	reset_control_deassert(data->rst);

> >  

> > -	model_data = of_device_get_match_data(&pdev->dev);

> > -

> > -	if (model_data->wait_init_sequence) {

> > +	if (data->model_data->wait_init_sequence) {

> >  		/* Enable engine in normal mode. */

> >  		writel(FIELD_PREP(ASPEED_ADC_OP_MODE,

> >  				  ASPEED_ADC_OP_MODE_NORMAL) |

> > @@ -281,8 +276,7 @@ static int aspeed_adc_probe(struct platform_device *pdev)

> >  	writel(adc_engine_control_reg_val,

> >  	       data->base + ASPEED_REG_ENGINE_CONTROL);

> >  

> > -	model_data = of_device_get_match_data(&pdev->dev);

> > -	indio_dev->name = model_data->model_name;

> > +	indio_dev->name = data->model_data->model_name;

> >  	indio_dev->info = &aspeed_adc_iio_info;

> >  	indio_dev->modes = INDIO_DIRECT_MODE;

> >  	indio_dev->channels = aspeed_adc_iio_channels;  

>
Joel Stanley Sept. 16, 2021, 3:52 a.m. UTC | #3
On Sun, 5 Sept 2021 at 14:47, Jonathan Cameron <jic23@kernel.org> wrote:
>

> On Sun, 5 Sep 2021 15:33:39 +0100

> Jonathan Cameron <jic23@kernel.org> wrote:

>

> > On Tue, 31 Aug 2021 15:14:47 +0800

> > Billy Tsai <billy_tsai@aspeedtech.com> wrote:

> >

> > > Keep the model data pointer to driver data for reducing the usage of

> > > of_device_get_match_data().

> > >

> > > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>

> > This one starts to be impacted by the fix (as its in the context).

> > Rather than making a mess of things for linux-next etc I'll hold

> > off on these until that fix is upstream in a few weeks.

> >

> > If I seem to have lost it (it's been known to happen :( ) then

> > feel free to poke me!

>

> Having taken another look at the rest of the series (and Philipp's review)

> please do a v6 starting from this patch.


I'd recommend against the practice of half applying a series. I have
just spent a good chunk of time looking at v6, and wondering why it
won't apply to any tags in Linus tree nor to next.

(It was made worse by the branch you applied them to not being part of
linux-next.)

Cheers,

Joel
Jonathan Cameron Sept. 18, 2021, 5:55 p.m. UTC | #4
On Thu, 16 Sep 2021 03:52:24 +0000
Joel Stanley <joel@jms.id.au> wrote:

> On Sun, 5 Sept 2021 at 14:47, Jonathan Cameron <jic23@kernel.org> wrote:

> >

> > On Sun, 5 Sep 2021 15:33:39 +0100

> > Jonathan Cameron <jic23@kernel.org> wrote:

> >  

> > > On Tue, 31 Aug 2021 15:14:47 +0800

> > > Billy Tsai <billy_tsai@aspeedtech.com> wrote:

> > >  

> > > > Keep the model data pointer to driver data for reducing the usage of

> > > > of_device_get_match_data().

> > > >

> > > > Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>  

> > > This one starts to be impacted by the fix (as its in the context).

> > > Rather than making a mess of things for linux-next etc I'll hold

> > > off on these until that fix is upstream in a few weeks.

> > >

> > > If I seem to have lost it (it's been known to happen :( ) then

> > > feel free to poke me!  

> >

> > Having taken another look at the rest of the series (and Philipp's review)

> > please do a v6 starting from this patch.  

> 

> I'd recommend against the practice of half applying a series. I have

> just spent a good chunk of time looking at v6, and wondering why it

> won't apply to any tags in Linus tree nor to next.


Hi Joel,

In this particular case it may been unwise, but in general it allows me to
handle a higher volume of patches than would otherwise be possible.
There are of course other approaches, but this one works well for me.
I did express to what tree and branch these were being applied
+ exposed for build tests.

> 

> (It was made worse by the branch you applied them to not being part of

> linux-next.)


It will be shortly. That was just unfortunate timing because of the end of the
merge window and a some issues that 0-day found in other patches in the tree
that needed to be fixed up before making a mess in next.

Jonathan

> 

> Cheers,

> 

> Joel
diff mbox series

Patch

diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
index f055fe7b2c40..76ae1c3f584b 100644
--- a/drivers/iio/adc/aspeed_adc.c
+++ b/drivers/iio/adc/aspeed_adc.c
@@ -77,6 +77,7 @@  struct aspeed_adc_model_data {
 
 struct aspeed_adc_data {
 	struct device		*dev;
+	const struct aspeed_adc_model_data *model_data;
 	void __iomem		*base;
 	spinlock_t		clk_lock;
 	struct clk_hw		*clk_prescaler;
@@ -118,8 +119,6 @@  static int aspeed_adc_read_raw(struct iio_dev *indio_dev,
 			       int *val, int *val2, long mask)
 {
 	struct aspeed_adc_data *data = iio_priv(indio_dev);
-	const struct aspeed_adc_model_data *model_data =
-			of_device_get_match_data(data->dev);
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
@@ -127,7 +126,7 @@  static int aspeed_adc_read_raw(struct iio_dev *indio_dev,
 		return IIO_VAL_INT;
 
 	case IIO_CHAN_INFO_SCALE:
-		*val = model_data->vref_voltage;
+		*val = data->model_data->vref_voltage;
 		*val2 = ASPEED_RESOLUTION_BITS;
 		return IIO_VAL_FRACTIONAL_LOG2;
 
@@ -146,13 +145,11 @@  static int aspeed_adc_write_raw(struct iio_dev *indio_dev,
 				int val, int val2, long mask)
 {
 	struct aspeed_adc_data *data = iio_priv(indio_dev);
-	const struct aspeed_adc_model_data *model_data =
-			of_device_get_match_data(data->dev);
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SAMP_FREQ:
-		if (val < model_data->min_sampling_rate ||
-			val > model_data->max_sampling_rate)
+		if (val < data->model_data->min_sampling_rate ||
+			val > data->model_data->max_sampling_rate)
 			return -EINVAL;
 
 		clk_set_rate(data->clk_scaler->clk,
@@ -198,7 +195,6 @@  static int aspeed_adc_probe(struct platform_device *pdev)
 {
 	struct iio_dev *indio_dev;
 	struct aspeed_adc_data *data;
-	const struct aspeed_adc_model_data *model_data;
 	const char *clk_parent_name;
 	int ret;
 	u32 adc_engine_control_reg_val;
@@ -209,6 +205,7 @@  static int aspeed_adc_probe(struct platform_device *pdev)
 
 	data = iio_priv(indio_dev);
 	data->dev = &pdev->dev;
+	data->model_data = of_device_get_match_data(&pdev->dev);
 	platform_set_drvdata(pdev, indio_dev);
 
 	data->base = devm_platform_ioremap_resource(pdev, 0);
@@ -249,9 +246,7 @@  static int aspeed_adc_probe(struct platform_device *pdev)
 	}
 	reset_control_deassert(data->rst);
 
-	model_data = of_device_get_match_data(&pdev->dev);
-
-	if (model_data->wait_init_sequence) {
+	if (data->model_data->wait_init_sequence) {
 		/* Enable engine in normal mode. */
 		writel(FIELD_PREP(ASPEED_ADC_OP_MODE,
 				  ASPEED_ADC_OP_MODE_NORMAL) |
@@ -281,8 +276,7 @@  static int aspeed_adc_probe(struct platform_device *pdev)
 	writel(adc_engine_control_reg_val,
 	       data->base + ASPEED_REG_ENGINE_CONTROL);
 
-	model_data = of_device_get_match_data(&pdev->dev);
-	indio_dev->name = model_data->model_name;
+	indio_dev->name = data->model_data->model_name;
 	indio_dev->info = &aspeed_adc_iio_info;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->channels = aspeed_adc_iio_channels;