[v2,2/2] drm/panel: Add support for Sharp LS060T1SX01 panel

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 4894913936e9..08f85a5ff738 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -451,6 +451,16 @@  config DRM_PANEL_SHARP_LS043T1LE01
 	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
 	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
 
+config DRM_PANEL_SHARP_LS060T1SX01
+	tristate "Sharp LS060T1SX01 FullHD video mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
+	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
+	  Bundle.
+
 config DRM_PANEL_SITRONIX_ST7701
 	tristate "Sitronix ST7701 panel driver"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index cae4d976c069..7dd6bd755e13 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -47,6 +47,7 @@  obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
+obj-$(CONFIG_DRM_PANEL_SHARP_LS060T1SX01) += panel-sharp-ls060t1sx01.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
 obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
diff --git a/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c b/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c
new file mode 100644
index 000000000000..4fece00e6156
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-sharp-ls060t1sx01.c
@@ -0,0 +1,274 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2021 Linaro Ltd.
+// Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree:
+//   Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct sharp_ls060 {
+	struct drm_panel panel;
+	struct mipi_dsi_device *dsi;
+	struct regulator *supply;
+	struct gpio_desc *reset_gpio;
+	bool prepared;
+};
+
+static inline struct sharp_ls060 *to_sharp_ls060(struct drm_panel *panel)
+{
+	return container_of(panel, struct sharp_ls060, panel);
+}
+
+#define dsi_dcs_write_seq(dsi, seq...) ({				\
+		static const u8 d[] = { seq };				\
+									\
+		mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d));	\
+	})
+
+static void sharp_ls060_reset(struct sharp_ls060 *ctx)
+{
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(10000, 11000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(10000, 11000);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+	usleep_range(10000, 11000);
+}
+
+static int sharp_ls060_on(struct sharp_ls060 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+	ret = dsi_dcs_write_seq(dsi, 0xbb, 0x13);
+	if (ret < 0) {
+		dev_err(dev, "Failed to send command: %d\n", ret);
+		return ret;
+	}
+
+	ret = dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START);
+	if (ret < 0) {
+		dev_err(dev, "Failed to send command: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(120);
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display on: %d\n", ret);
+		return ret;
+	}
+	msleep(50);
+
+	return 0;
+}
+
+static int sharp_ls060_off(struct sharp_ls060 *ctx)
+{
+	struct mipi_dsi_device *dsi = ctx->dsi;
+	struct device *dev = &dsi->dev;
+	int ret;
+
+	dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display off: %d\n", ret);
+		return ret;
+	}
+	usleep_range(2000, 3000);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(121);
+
+	return 0;
+}
+
+static int sharp_ls060_prepare(struct drm_panel *panel)
+{
+	struct sharp_ls060 *ctx = to_sharp_ls060(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	if (ctx->prepared)
+		return 0;
+
+	ret = regulator_enable(ctx->supply);
+	if (ret < 0)
+		return ret;
+
+	sharp_ls060_reset(ctx);
+
+	ret = sharp_ls060_on(ctx);
+	if (ret < 0) {
+		dev_err(dev, "Failed to initialize panel: %d\n", ret);
+		regulator_disable(ctx->supply);
+		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+		return ret;
+	}
+
+	ctx->prepared = true;
+	return 0;
+}
+
+static int sharp_ls060_unprepare(struct drm_panel *panel)
+{
+	struct sharp_ls060 *ctx = to_sharp_ls060(panel);
+	struct device *dev = &ctx->dsi->dev;
+	int ret;
+
+	if (!ctx->prepared)
+		return 0;
+
+	ret = sharp_ls060_off(ctx);
+	if (ret < 0)
+		dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+	regulator_disable(ctx->supply);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+
+	ctx->prepared = false;
+	return 0;
+}
+
+static const struct drm_display_mode sharp_ls060_mode = {
+	.clock = (1080 + 96 + 16 + 64) * (1920 + 4 + 1 + 16) * 60 / 1000,
+	.hdisplay = 1080,
+	.hsync_start = 1080 + 96,
+	.hsync_end = 1080 + 96 + 16,
+	.htotal = 1080 + 96 + 16 + 64,
+	.vdisplay = 1920,
+	.vsync_start = 1920 + 4,
+	.vsync_end = 1920 + 4 + 1,
+	.vtotal = 1920 + 4 + 1 + 16,
+	.width_mm = 75,
+	.height_mm = 132,
+};
+
+static int sharp_ls060_get_modes(struct drm_panel *panel,
+				 struct drm_connector *connector)
+{
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &sharp_ls060_mode);
+	if (!mode)
+		return -ENOMEM;
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs sharp_ls060_panel_funcs = {
+	.prepare = sharp_ls060_prepare,
+	.unprepare = sharp_ls060_unprepare,
+	.get_modes = sharp_ls060_get_modes,
+};
+
+static int sharp_ls060_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct sharp_ls060 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->supply = devm_regulator_get(dev, "avdd");
+	if (IS_ERR(ctx->supply))
+		return PTR_ERR(ctx->supply);
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+				     "Failed to get reset-gpios\n");
+
+	ctx->dsi = dsi;
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+			  MIPI_DSI_MODE_EOT_PACKET |
+			  MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+	drm_panel_init(&ctx->panel, dev, &sharp_ls060_panel_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int sharp_ls060_remove(struct mipi_dsi_device *dsi)
+{
+	struct sharp_ls060 *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&ctx->panel);
+
+	return 0;
+}
+
+static const struct of_device_id sharp_ls060t1sx01_of_match[] = {
+	{ .compatible = "sharp,ls060t1sx01" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sharp_ls060t1sx01_of_match);
+
+static struct mipi_dsi_driver sharp_ls060_driver = {
+	.probe = sharp_ls060_probe,
+	.remove = sharp_ls060_remove,
+	.driver = {
+		.name = "panel-sharp-ls060t1sx01",
+		.of_match_table = sharp_ls060t1sx01_of_match,
+	},
+};
+module_mipi_dsi_driver(sharp_ls060_driver);
+
+MODULE_AUTHOR("Dmitry Baryshkov <dmitry.baryshkov@linaro.org>");
+MODULE_DESCRIPTION("DRM driver for Sharp LS060T1SX01 1080p video mode dsi panel");
+MODULE_LICENSE("GPL v2");