From patchwork Fri Aug 6 15:21:46 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sam Protsenko X-Patchwork-Id: 492848 Delivered-To: patch@linaro.org Received: by 2002:a05:6638:396:0:0:0:0 with SMTP id y22csp424200jap; Fri, 6 Aug 2021 08:22:55 -0700 (PDT) X-Google-Smtp-Source: ABdhPJx/UlWiQvxLtU6Mg+BjyXV2zZCYhiKYfvxqHtPOp8FCze5oyjzMIZam/MJhJ1sqA0Jt3Cid X-Received: by 2002:a05:6402:1458:: with SMTP id d24mr13848663edx.281.1628263375803; Fri, 06 Aug 2021 08:22:55 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1628263375; cv=none; d=google.com; s=arc-20160816; b=G/g1VqqxdZkV8dWXwVSPSOIRDrqtgcqoCSs+yLIuXbA/xkHNziA47BUq4Mibjs3xZ5 1CaACn4bNoLP8AVzb1g3aZMUU/rthymDt9zLLtPCZokF0epE/8+yZLVZ+tA2CyJITfzo Upq7yqqYsdgTib5azBS+MeWbgml7sl/C+REWLC52cqoVfYvuLfqw0NcTkfHkuVbI/fzi wNZfzZZFdRuntdYsYBj45TWALgEfiB0KpvK7iO5XIeFYWqtsmUO9hpG15CU8GZ1fC271 IkRMYcHSO090kFfH4GybIrqb9WYXNuSClvGsWdCXLFoTPdOsA5DyjPsJLiE094516CmU /aAg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=DEw4AnrBpMSOvBaDKqc62OLDqJ/rOmIVhI1hfmr2Aao=; b=zhDD4CDXRXfOoGeghdmh7pvgFR54WhyV4g3yoBGIYikNVkTsL20M9xUedZ1S81HT4L 0x7F8ba744YZfKnX7nhD5jbnDrinKDqRdHfg+GDBmeMEpyvQTxIUDu70W2nxBrLx/O3R BMDNl03Mxwkyg9cwI7NFwcbsTUOFfRXBq6cnDRHCYBxAuxE7OZdpjI0X5Fc8DLqpioDQ G2qm5yS+UjhJeVIVy6Gi9dB3yUF2eexuIUsLbVU633Hb32fdmAZGC8C87GwbU80BK/I8 BPciUduNJP+jCClVKMZLJhf3scDr9licvOfP9r13LoT4E12toTMJYYO82MbsHzuUNBpQ Ze8g== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=DdGJv9h5; spf=pass (google.com: domain of devicetree-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=devicetree-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id w20si9145184edr.65.2021.08.06.08.22.55; Fri, 06 Aug 2021 08:22:55 -0700 (PDT) Received-SPF: pass (google.com: domain of devicetree-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=DdGJv9h5; spf=pass (google.com: domain of devicetree-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=devicetree-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S244643AbhHFPXJ (ORCPT + 7 others); Fri, 6 Aug 2021 11:23:09 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:42924 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S244675AbhHFPWh (ORCPT ); Fri, 6 Aug 2021 11:22:37 -0400 Received: from mail-lj1-x233.google.com (mail-lj1-x233.google.com [IPv6:2a00:1450:4864:20::233]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C5F2CC061798 for ; Fri, 6 Aug 2021 08:22:02 -0700 (PDT) Received: by mail-lj1-x233.google.com with SMTP id m18so1128299ljo.1 for ; Fri, 06 Aug 2021 08:22:02 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=DEw4AnrBpMSOvBaDKqc62OLDqJ/rOmIVhI1hfmr2Aao=; b=DdGJv9h5+/Fz1btG+8Tn2oYJmxv+VBcCw8RyVnJCy0DBn9S9ObdI7iWxteEcL+oENJ iz5tqWySXbrTpuU/ySw27Wcd34Yf9XFqgK00xJ8AUJ259zorPo4OZQMmfvGqQtWNWZn5 69WUGb7KUSBvoSYV0xkjW0ZNeznAVr8/YStaUtNHWtEKjnXvm1xjdDNJWkq6MepgGLvn ozvhnfy+Pe1PvtOa3JDJy4MzjVP1xv7ZdmuzOhTn5dUCiaT4OF1DFWuTheisl7P+VYOY Q7y1lVVGd66udlPXs0QPFXBB6YQ88MmIIjYdJ310ZpJNfQHu0nr79XuGv0O4WgzaT9CP ODKg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=DEw4AnrBpMSOvBaDKqc62OLDqJ/rOmIVhI1hfmr2Aao=; b=C9YXPIg0/GmHxymoaeXjuhSKeZMU0iI/umofNQabbB61CCQc/PPOduC52IMis5zkk2 ZZ/04Svpisah+7yMMMXKes2gvbc2suDQ3Nk55QJp4ofZhGPBEzpDtdS+wgfjFO3KiDNY Lu50UjsDBsTyjfSvYwSQw4B1ojtHECRqjkFG5vdx7FiiDX0ZU2YjXWgiHqlit7S+Imc8 aoy9HreF8CaiMLMvvV1TIgUVKXl0rBHg5h0yWH6ChuN44uhLvC66GBBvZGyrLjiXhugY +rWC/14zBUnSYg4WVf0ZFXxPZxY9K22t3ee5WJPEBO33PmPrjVyGsx0CdWN+UGeybdKy ZCUw== X-Gm-Message-State: AOAM532kLURn7RxYJ9qoHZwWEE7LZCg4veBy6pGUZOaCPX2MrkfXz527 3LOtkbT6zry6g+O/s48cWJTRrA== X-Received: by 2002:a2e:9b03:: with SMTP id u3mr2804254lji.401.1628263321057; Fri, 06 Aug 2021 08:22:01 -0700 (PDT) Received: from localhost ([31.134.121.151]) by smtp.gmail.com with ESMTPSA id t30sm713170ljo.124.2021.08.06.08.22.00 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 06 Aug 2021 08:22:00 -0700 (PDT) From: Sam Protsenko To: Sylwester Nawrocki , Chanwoo Choi , Krzysztof Kozlowski , Linus Walleij , Tomasz Figa , =?utf-8?q?Pawe=C5=82_Chmiel?= Cc: Marc Zyngier , Rob Herring , Stephen Boyd , Michael Turquette , Jiri Slaby , Greg Kroah-Hartman , Charles Keepax , Ryu Euiyoul , Tom Gall , Sumit Semwal , John Stultz , Amit Pundir , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org, linux-serial@vger.kernel.org Subject: [PATCH v2 8/8] arm64: dts: exynos: Add Exynos850 SoC support Date: Fri, 6 Aug 2021 18:21:46 +0300 Message-Id: <20210806152146.16107-9-semen.protsenko@linaro.org> X-Mailer: git-send-email 2.30.2 In-Reply-To: <20210806152146.16107-1-semen.protsenko@linaro.org> References: <20210806152146.16107-1-semen.protsenko@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Samsung Exynos850 is ARMv8-based mobile-oriented SoC. This patch adds minimal SoC support by including next Device Tree nodes: 1. Octa cores (Cortex-A55), supporting PSCI v1.0 2. ARM architecture timer (armv8-timer) 3. Interrupt controller (GIC-400) 4. Clock controller node (using stub driver for now) 5. Pinctrl nodes for GPIO 6. Serial node Signed-off-by: Sam Protsenko --- Changes in v2: * Commit message: - Documented added dts features instead of CPU features * exynos850-usi.dtsi: - Removed, moved everything to exynos850.dtsi * exynos850.dtsi: - Root node: - Added comment about engineering name (Exynos3830) - Renamed pinctrl nodes, adding domain names - Used hard coded IRQ numbers instead of named constants everywhere - Added soc node, moved next nodes there: gic, clock, pinctrls and serial - Used address-cells=1 for soc node and removed unneeded 0x0 from reg properties - Moved exynos850-pinctrl.dtsi include line to the end of exynos850.dtsi - Coding style fixes - cpus: - Used address-cells=1 for cpus node - Renamed cpu@0001 to cpu@1, and so on - Left only "arm,cortex-a55" for cpus compatible - Renamed reg = <0x0001> to <0x1> for cpus - armv8 timer: - Add comment about missing HV timer IRQ to armv8 timer node - Removed not existing properties from armv8 timer node - Fixed cpu number in CPU_MASK() - Removed obsolete clock-frequency property - GIC: - Fixed GIC type to be GIC-400 - Fixed size of GIC's 2nd region to be 0x2000 - serial node: - Hard coded clock number for serial_0 for now; will replace with named const once proper clock driver is implemented - Removed gate_uart_clk0 clock from serial_0, as that clock is not supported in serial driver anyway (yet) - clock node: - Fixed clock controller node name (@0x12.. -> @12..) * exynos850-pinctrl.dtsi: - Referenced pinctrl nodes instead of defining those again in root node - Fixed interrupt-cells (3 -> 2) - Fixed USI related comments for pin config nodes - Removed decon_f_te_* and fm_lna_en nodes (won't be used) - Reordered pin config nodes by pin numbers - Improved all comments - Used existing named constants for pin-function and pin-pud - Fixed node names (used hyphens instead of underscore) - Fixed warnings found in W=1 build .../boot/dts/exynos/exynos850-pinctrl.dtsi | 748 ++++++++++++++++++ arch/arm64/boot/dts/exynos/exynos850.dtsi | 256 ++++++ 2 files changed, 1004 insertions(+) create mode 100644 arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi create mode 100644 arch/arm64/boot/dts/exynos/exynos850.dtsi -- 2.30.2 diff --git a/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi new file mode 100644 index 000000000000..ba5d5f33e2f6 --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos850-pinctrl.dtsi @@ -0,0 +1,748 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung's Exynos850 SoC pin-mux and pin-config device tree source + * + * Copyright (C) 2017 Samsung Electronics Co., Ltd. + * Copyright (C) 2021 Linaro Ltd. + * + * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device + * tree nodes in this file. + */ + +#include +#include + +&pinctrl_alive { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + , + , + , + , + , + , + ; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + , + , + , + , + , + , + ; + }; + + gpa2: gpa2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + , + , + , + , + , + , + ; + }; + + gpa3: gpa3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + , + , + , + , + , + , + ; + }; + + gpa4: gpa4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + }; + + gpq0: gpq0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* I2C5 (also called CAM_PMIC_I2C in TRM) */ + i2c5_bus: i2c5-bus { + samsung,pins = "gpa3-5", "gpa3-6"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + /* I2C6 (also called MOTOR_I2C in TRM) */ + i2c6_bus: i2c6-bus { + samsung,pins = "gpa3-7", "gpa4-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + /* USI: UART */ + uart0_bus: uart0-bus { + samsung,pins = "gpq0-0", "gpq0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; +}; + +&pinctrl_cmgp { + gpm0: gpm0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + gpm1: gpm1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + gpm2: gpm2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + gpm3: gpm3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + gpm4: gpm4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + gpm5: gpm5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gic>; + interrupts = ; + }; + + /* USI_CMGP0: HSI2C function */ + hsi2c3_bus: hsi2c3-bus { + samsung,pins = "gpm0-0", "gpm1-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + /* USI_CMGP0: UART function (4 pins, Auto Flow Control) */ + uart1_bus_single: uart1-bus { + samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* USI_CMGP0: UART function (2 pins, Non-Auto Flow Control) */ + uart1_bus_dual: uart1-bus-dual { + samsung,pins = "gpm0-0", "gpm1-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* USI_CMGP0: SPI function */ + spi1_bus: spi1-bus { + samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + spi1_cs: spi1-cs { + samsung,pins = "gpm3-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + spi1_cs_func: spi1-cs-func { + samsung,pins = "gpm3-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + /* USI_CMGP1: HSI2C function */ + hsi2c4_bus: hsi2c4-bus { + samsung,pins = "gpm4-0", "gpm5-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + /* USI_CMGP1: UART function (4 pins, Auto Flow Control) */ + uart2_bus_single: uart2-bus { + samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* USI_CMGP1: UART function (2 pins, Non-Auto Flow Control) */ + uart2_bus_dual: uart2-bus-dual { + samsung,pins = "gpm4-0", "gpm5-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + /* USI_CMGP1: SPI function */ + spi2_bus: spi2-bus { + samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + spi2_cs: spi2-cs { + samsung,pins = "gpm7-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + spi2_cs_func: spi2-cs-func { + samsung,pins = "gpm7-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_aud { + gpb0: gpb0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb1: gpb1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + aud_codec_mclk: aud-codec-mclk { + samsung,pins = "gpb0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_codec_mclk_idle: aud-codec-mclk-idle { + samsung,pins = "gpb0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s0_bus: aud-i2s0-bus { + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s0_idle: aud-i2s0-idle { + samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s1_bus: aud-i2s1-bus { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_i2s1_idle: aud-i2s1-idle { + samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_fm_bus: aud-fm-bus { + samsung,pins = "gpb1-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; + + aud_fm_idle: aud-fm-idle { + samsung,pins = "gpb1-4"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; +}; + +&pinctrl_hsi { + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpf2-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + sd2_clk_fast_slew_rate_1x: sd2-clk-fast-slew-rate-1x { + samsung,pins = "gpf2-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + sd2_clk_fast_slew_rate_1_5x: sd2-clk-fast-slew-rate-1-5x { + samsung,pins = "gpf2-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <1>; + }; + + sd2_clk_fast_slew_rate_2x: sd2-clk-fast-slew-rate-2x { + samsung,pins = "gpf2-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + sd2_clk_fast_slew_rate_2_5x: sd2-clk-fast-slew-rate-2-5x { + samsung,pins = "gpf2-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <3>; + }; + + sd2_clk_fast_slew_rate_3x: sd2-clk-fast-slew-rate-3x { + samsung,pins = "gpf2-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <4>; + }; + + sd2_clk_fast_slew_rate_4x: sd2-clk-fast-slew-rate-4x { + samsung,pins = "gpf2-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <5>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpf2-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpf2-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpf2-3", "gpf2-4", "gpf2-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + sd2_pins_as_pdn: sd2-pins-as-pdn { + samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; +}; + +&pinctrl_core { + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpf0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <3>; + }; + + sd0_clk_fast_slew_rate_1x: sd0-clk-fast-slew-rate-1x { + samsung,pins = "gpf0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <1>; + }; + + sd0_clk_fast_slew_rate_2x: sd0-clk-fast-slew-rate-2x { + samsung,pins = "gpf0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + sd0_clk_fast_slew_rate_3x: sd0-clk-fast-slew-rate-3x { + samsung,pins = "gpf0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + sd0_clk_fast_slew_rate_4x: sd0-clk-fast-slew-rate-4x { + samsung,pins = "gpf0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpf0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <3>; + }; + + sd0_rdqs: sd0-rdqs { + samsung,pins = "gpf0-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <3>; + }; + + sd0_nreset: sd0-nreset { + samsung,pins = "gpf0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpf1-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <3>; + }; +}; + +&pinctrl_peri { + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp0: gpp0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + gpp1: gpp1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpp2: gpp2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + /* USI: HSI2C0 */ + hsi2c0_bus: hsi2c0-bus { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + /* USI: HSI2C1 */ + hsi2c1_bus: hsi2c1-bus { + samsung,pins = "gpc1-2", "gpc1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + /* USI: HSI2C2 */ + hsi2c2_bus: hsi2c2-bus { + samsung,pins = "gpc1-4", "gpc1-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + /* USI: SPI */ + spi0_bus: spi0-bus { + samsung,pins = "gpp2-0", "gpp2-2", "gpp2-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + spi0_cs: spi0-cs { + samsung,pins = "gpp2-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + spi0_cs_func: spi0-cs-func { + samsung,pins = "gpp2-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpp0-0", "gpp0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpp0-2", "gpp0-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpp0-4", "gpp0-5"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpp1-0", "gpp1-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpp1-2", "gpp1-3"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <0>; + }; + + sensor_mclk0_in: sensor-mclk0-in { + samsung,pins = "gpc0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + sensor_mclk0_out: sensor-mclk0-out { + samsung,pins = "gpc0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + sensor_mclk0_fn: sensor-mclk0-fn { + samsung,pins = "gpc0-0"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + sensor_mclk1_in: sensor-mclk1-in { + samsung,pins = "gpc0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + sensor_mclk1_out: sensor-mclk1-out { + samsung,pins = "gpc0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + sensor_mclk1_fn: sensor-mclk1-fn { + samsung,pins = "gpc0-1"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + sensor_mclk2_in: sensor-mclk2-in { + samsung,pins = "gpc0-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + sensor_mclk2_out: sensor-mclk2-out { + samsung,pins = "gpc0-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + sensor_mclk2_fn: sensor-mclk2-fn { + samsung,pins = "gpc0-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + samsung,pin-drv = <2>; + }; + + xclkout: xclkout { + samsung,pins = "gpq0-2"; + samsung,pin-function = ; + samsung,pin-pud = ; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos850.dtsi b/arch/arm64/boot/dts/exynos/exynos850.dtsi new file mode 100644 index 000000000000..9d8c1402685e --- /dev/null +++ b/arch/arm64/boot/dts/exynos/exynos850.dtsi @@ -0,0 +1,256 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Samsung Exynos850 SoC device tree source + * + * Copyright (C) 2018 Samsung Electronics Co., Ltd. + * Copyright (C) 2021 Linaro Ltd. + * + * Samsung Exynos850 SoC device nodes are listed in this file. + * Exynos based board files can include this file and provide + * values for board specific bindings. + */ + +#include + +/ { + /* Also known under engineering name Exynos3830 */ + compatible = "samsung,exynos850"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <1>; + + aliases { + pinctrl0 = &pinctrl_alive; + pinctrl1 = &pinctrl_cmgp; + pinctrl2 = &pinctrl_aud; + pinctrl3 = &pinctrl_hsi; + pinctrl4 = &pinctrl_core; + pinctrl5 = &pinctrl_peri; + serial0 = &serial_0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x0>; + enable-method = "psci"; + }; + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x1>; + enable-method = "psci"; + }; + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x2>; + enable-method = "psci"; + }; + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x3>; + enable-method = "psci"; + }; + cpu4: cpu@4 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x100>; + enable-method = "psci"; + }; + cpu5: cpu@5 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x101>; + enable-method = "psci"; + }; + cpu6: cpu@6 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x102>; + enable-method = "psci"; + }; + cpu7: cpu@7 { + device_type = "cpu"; + compatible = "arm,cortex-a55"; + reg = <0x103>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + /* Hypervisor Virtual Timer interrupt is not wired to GIC */ + interrupts = , + , + , + ; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x0 0x20000000>; + + gic: interrupt-controller@12a01000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + reg = <0x12a01000 0x1000>, + <0x12a02000 0x2000>, + <0x12a04000 0x2000>, + <0x12a06000 0x2000>; + interrupt-controller; + interrupts = ; + }; + + clock: clock-controller@120e0000 { + compatible = "samsung,exynos850-clock"; + reg = <0x120e0000 0x8000>; + #clock-cells = <1>; + }; + + pinctrl_alive: pinctrl@11850000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x11850000 0x1000>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + + wakeup-interrupt-controller { + compatible = "samsung,exynos7-wakeup-eint"; + }; + }; + + pinctrl_cmgp: pinctrl@11c30000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x11c30000 0x1000>; + interrupts = , + , + , + , + , + , + , + ; + + wakeup-interrupt-controller { + compatible = "samsung,exynos7-wakeup-eint"; + }; + }; + + pinctrl_aud: pinctrl@14a60000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x14a60000 0x1000>; + }; + + pinctrl_hsi: pinctrl@13430000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x13430000 0x1000>; + interrupts = ; + }; + + pinctrl_core: pinctrl@12070000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x12070000 0x1000>; + interrupts = ; + }; + + pinctrl_peri: pinctrl@139b0000 { + compatible = "samsung,exynos850-pinctrl"; + reg = <0x139b0000 0x1000>; + interrupts = ; + }; + + /* USI: UART */ + serial_0: uart@13820000 { + compatible = "samsung,exynos850-uart"; + reg = <0x13820000 0x100>; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_bus>; + clocks = <&clock 2>; + clock-names = "uart"; + status = "disabled"; + }; + }; +}; + +#include "exynos850-pinctrl.dtsi"