@@ -36,6 +36,12 @@ sdio_pwrseq: sdio-pwrseq {
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
};
+ sound {
+ compatible = "audio-graph-card";
+ label = "Analog";
+ dais = <&i2s0_p0>;
+ };
+
vcc12v_dcin: dc-12v {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
@@ -422,6 +428,20 @@ &i2c1 {
i2c-scl-rising-time-ns = <300>;
i2c-scl-falling-time-ns = <15>;
status = "okay";
+
+ es8316: codec@11 {
+ compatible = "everest,es8316";
+ reg = <0x11>;
+ clocks = <&cru SCLK_I2S_8CH_OUT>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
+
+ port {
+ es8316_p0_0: endpoint {
+ remote-endpoint = <&i2s0_p0_0>;
+ };
+ };
+ };
};
&i2c3 {
@@ -441,6 +461,14 @@ &i2s0 {
rockchip,capture-channels = <2>;
rockchip,playback-channels = <2>;
status = "okay";
+
+ i2s0_p0: port {
+ i2s0_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&es8316_p0_0>;
+ };
+ };
};
&i2s1 {
ROCK Pi 4 boards have the codec connected to i2s0 and it is accessible via i2c1 address 0x11. Add an audio-graph-card for it. Signed-off-by: Alex Bee <knaerzche@gmail.com> --- .../boot/dts/rockchip/rk3399-rock-pi-4.dtsi | 28 +++++++++++++++++++ 1 file changed, 28 insertions(+)