diff mbox series

[v4,3/5] arm64: dts: ti: k3-am642-evm: Enable PCIe and SERDES

Message ID 20210603142251.14563-4-kishon@ti.com
State Accepted
Commit 354065bed2d15f6ff7796c8105133ccdf3a84917
Headers show
Series AM64: EVM/SK: Enable PCIe and USB | expand

Commit Message

Kishon Vijay Abraham I June 3, 2021, 2:22 p.m. UTC 
AM642 EVM has a x4 lane PCIe connector. Enable PCIe in RC mode here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am642-evm.dts | 30 +++++++++++++++++++++++++
 1 file changed, 30 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index dad0efa961ed..8c27f563a390 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -5,6 +5,8 @@ 
 
 /dts-v1/;
 
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/mux/ti-serdes.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/net/ti-dp83867.h>
@@ -466,3 +468,31 @@ 
 &mailbox0_cluster7 {
 	status = "disabled";
 };
+
+&serdes_ln_ctrl {
+	idle-states = <AM64_SERDES0_LANE0_PCIE0>;
+};
+
+&serdes0 {
+	serdes0_pcie_link: phy@0 {
+		reg = <0>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 1>;
+	};
+};
+
+&pcie0_rc {
+	reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>;
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+};
+
+&pcie0_ep {
+	phys = <&serdes0_pcie_link>;
+	phy-names = "pcie-phy";
+	num-lanes = <1>;
+	status = "disabled";
+};