From patchwork Tue May 18 23:28:56 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Rob Herring \(Arm\)" X-Patchwork-Id: 441254 Delivered-To: patch@linaro.org Received: by 2002:a02:7a1b:0:0:0:0:0 with SMTP id a27csp712799jac; Tue, 18 May 2021 16:29:12 -0700 (PDT) X-Google-Smtp-Source: ABdhPJyHBFKkaWZTN8rJhDWRH1kmafId9cYbJbE+b5FX+unpF0bDYFdoz1EXf2v216mf42GE18hT X-Received: by 2002:aa7:d893:: with SMTP id u19mr10026308edq.258.1621380552443; Tue, 18 May 2021 16:29:12 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1621380552; cv=none; d=google.com; s=arc-20160816; b=MZrCDO5yD/6gUs+jSHOSOS+fZC59YGVvsCAFXrNkGQGpncLPD4Peuj7MFoK5dKpaTj /rceHayMH9j8bJoIEJg6IWdtwKagIwnyCWFaFbJRSN9p52X6Auy0Zv5EIgekA9j1oCqE KIxiMMbnOLrQ4K3jxxAM1Wu8eyvePIELCUfZ0lF1rJi7/l7kfBM5NA9JZiJFpTkD74wP lSchKZu397i1PezQLgAImDNBCEDlWYDftaT+ebZO8pLQYmCnxM2/jb7mMDfpEZ5jVRZU 1tf0ajBLgGMDAiMcz1Dfa2P6ziSDh1KwJb6JBgRTu+AwcoIjzSEJxo+E+R4TCOKHs3mH yCHQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from; bh=eqsOwRGCjYYgkrBUSVZqjkvfIx+eLEI4ynYHotBpsrU=; b=TALHlpfFxdN3cRAEwPSKWYDI09mKmTQuQNg7rAFGI3yF0PLZmjiNtcnEzeKULmLymw Os4bLQE4KaN3MLU6yIsSd0ppyK01/ddSJBJYwaBxF93ZTlKf2RgS31y5l8jjpse/V9cc 0JLk3vEynKDZahavomk128iSWiQU0aX5qQPkLVpiLia2R8Uq7+cHfZH1KRiQHc2f6ecH JanLky3OxhAYNHyIJE4k9jqmBsRlI5DIGskM2yFgwn7ykW6pF3lYHPbJB919/GiQeGqA 8wkyGJ5ssRpFfpq2aVmaVn4unVu/lUkgIFBXw/6dPp9W93NA26cSkI4nv2f3EiNRQFH+ QcZg== ARC-Authentication-Results: i=1; mx.google.com; spf=pass (google.com: domain of devicetree-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=devicetree-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id q8si9820446edr.112.2021.05.18.16.29.12; Tue, 18 May 2021 16:29:12 -0700 (PDT) Received-SPF: pass (google.com: domain of devicetree-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; spf=pass (google.com: domain of devicetree-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=devicetree-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S238649AbhERXa2 (ORCPT + 7 others); Tue, 18 May 2021 19:30:28 -0400 Received: from mail-ot1-f49.google.com ([209.85.210.49]:44937 "EHLO mail-ot1-f49.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S238853AbhERXa0 (ORCPT ); Tue, 18 May 2021 19:30:26 -0400 Received: by mail-ot1-f49.google.com with SMTP id r26-20020a056830121ab02902a5ff1c9b81so10158807otp.11; Tue, 18 May 2021 16:29:07 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=eqsOwRGCjYYgkrBUSVZqjkvfIx+eLEI4ynYHotBpsrU=; b=mTOoIzet3oQoDbOeMP+wBxWqaEQUMBWDn+oF4eS6d3k+uBNQ0x5uKk31+89ZGGGIXB 2ijGVzyAty6aOfp5vG3OMd0A3rt+yHJMpZGfDg5f6YS426FdJdRK5PU/Gi4b2aJQgBMb 599wVTGU3CiHdZ693fRDA0aeSRvqVSquIlKee+LeTELhiJN3/WMnC43ODTG7FlnyfLfZ JctR09IYl44Iup8/BTHCgFY9S5OwctwvzlU0UYfw3Z2P9OO7/xJ1ZO0EQrgRLk7w06qL O/T4hiTqw8oPhxYWlls84vNw2/BfcoxyjTMYey2/Bqdb72tBYmaEVp4B5HqX1g6j5pd/ u3Pw== X-Gm-Message-State: AOAM530FHuOl0hgRbRu12QHBJZiPDaFS1m4yBdrJ9ARuLd+S/1hga3n9 opxvye37A+OODBt/6PgoeFJSsSkgkA== X-Received: by 2002:a9d:74c6:: with SMTP id a6mr6281697otl.132.1621380545890; Tue, 18 May 2021 16:29:05 -0700 (PDT) Received: from xps15.herring.priv (24-155-109-49.dyn.grandenetworks.net. [24.155.109.49]) by smtp.googlemail.com with ESMTPSA id d19sm3985608oop.26.2021.05.18.16.29.04 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 18 May 2021 16:29:04 -0700 (PDT) From: Rob Herring To: devicetree@vger.kernel.org, Peter Rosin , Wolfram Sang Cc: linux-kernel@vger.kernel.org, Alexandre Belloni , Jacopo Mondi , Kieran Bingham , Kishon Vijay Abraham I , Laurent Pinchart , Lee Jones , =?utf-8?q?Niklas_S=C3=B6derlund?= , Roger Quadros , Jonathan Cameron Subject: [PATCH 4/6] dt-bindings: i2c: Convert i2c-mux bindings to DT schema Date: Tue, 18 May 2021 18:28:56 -0500 Message-Id: <20210518232858.1535403-5-robh@kernel.org> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20210518232858.1535403-1-robh@kernel.org> References: <20210518232858.1535403-1-robh@kernel.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org As some of the example I2C devices don't have schemas yet, change them to ones that do. Cc: Peter Rosin Signed-off-by: Rob Herring --- .../bindings/i2c/i2c-demux-pinctrl.txt | 2 +- .../devicetree/bindings/i2c/i2c-mux-gpio.txt | 4 +- .../devicetree/bindings/i2c/i2c-mux-gpmux.txt | 99 -------------- .../bindings/i2c/i2c-mux-gpmux.yaml | 124 ++++++++++++++++++ .../bindings/i2c/i2c-mux-ltc4306.txt | 4 +- .../bindings/i2c/i2c-mux-pinctrl.txt | 4 +- .../devicetree/bindings/i2c/i2c-mux-reg.txt | 4 +- .../devicetree/bindings/i2c/i2c-mux.txt | 73 ----------- .../devicetree/bindings/i2c/i2c-mux.yaml | 87 ++++++++++++ 9 files changed, 220 insertions(+), 181 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux.txt create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mux.yaml -- 2.27.0 diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt index 81b5d55086fa..86b2e433a969 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt @@ -27,7 +27,7 @@ Required properties: - i2c-bus-name: The name of this bus. Also needed as pinctrl-name for the I2C parents. -Furthermore, I2C mux properties and child nodes. See i2c-mux.txt in this +Furthermore, I2C mux properties and child nodes. See i2c-mux.yaml in this directory. Example: diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt index 21da3ecbb370..e00d2b9e957a 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt @@ -22,8 +22,8 @@ Required properties: - i2c-parent: The phandle of the I2C bus that this multiplexer's master-side port is connected to. - mux-gpios: list of gpios used to control the muxer -* Standard I2C mux properties. See i2c-mux.txt in this directory. -* I2C child bus nodes. See i2c-mux.txt in this directory. +* Standard I2C mux properties. See i2c-mux.yaml in this directory. +* I2C child bus nodes. See i2c-mux.yaml in this directory. Optional properties: - idle-state: value to set the muxer to when idle. When no value is diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt deleted file mode 100644 index 057083a8ba17..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.txt +++ /dev/null @@ -1,99 +0,0 @@ -General Purpose I2C Bus Mux - -This binding describes an I2C bus multiplexer that uses a mux controller -from the mux subsystem to route the I2C signals. - - .-----. .-----. - | dev | | dev | - .------------. '-----' '-----' - | SoC | | | - | | .--------+--------' - | .------. | .------+ child bus A, on MUX value set to 0 - | | I2C |-|--| Mux | - | '------' | '--+---+ child bus B, on MUX value set to 1 - | .------. | | '----------+--------+--------. - | | MUX- | | | | | | - | | Ctrl |-|-----+ .-----. .-----. .-----. - | '------' | | dev | | dev | | dev | - '------------' '-----' '-----' '-----' - -Required properties: -- compatible: i2c-mux -- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side - port is connected to. -- mux-controls: The phandle of the mux controller to use for operating the - mux. -* Standard I2C mux properties. See i2c-mux.txt in this directory. -* I2C child bus nodes. See i2c-mux.txt in this directory. The sub-bus number - is also the mux-controller state described in ../mux/mux-controller.yaml - -Optional properties: -- mux-locked: If present, explicitly allow unrelated I2C transactions on the - parent I2C adapter at these times: - + during setup of the multiplexer - + between setup of the multiplexer and the child bus I2C transaction - + between the child bus I2C transaction and releasing of the multiplexer - + during releasing of the multiplexer - However, I2C transactions to devices behind all I2C multiplexers connected - to the same parent adapter that this multiplexer is connected to are blocked - for the full duration of the complete multiplexed I2C transaction (i.e. - including the times covered by the above list). - If mux-locked is not present, the multiplexer is assumed to be parent-locked. - This means that no unrelated I2C transactions are allowed on the parent I2C - adapter for the complete multiplexed I2C transaction. - The properties of mux-locked and parent-locked multiplexers are discussed - in more detail in Documentation/i2c/i2c-topology.rst. - -For each i2c child node, an I2C child bus will be created. They will -be numbered based on their order in the device tree. - -Whenever an access is made to a device on a child bus, the value set -in the relevant node's reg property will be set as the state in the -mux controller. - -Example: - mux: mux-controller { - compatible = "gpio-mux"; - #mux-control-cells = <0>; - - mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, - <&pioA 1 GPIO_ACTIVE_HIGH>; - }; - - i2c-mux { - compatible = "i2c-mux"; - mux-locked; - i2c-parent = <&i2c1>; - - mux-controls = <&mux>; - - #address-cells = <1>; - #size-cells = <0>; - - i2c@1 { - reg = <1>; - #address-cells = <1>; - #size-cells = <0>; - - ssd1307: oled@3c { - compatible = "solomon,ssd1307fb-i2c"; - reg = <0x3c>; - pwms = <&pwm 4 3000>; - reset-gpios = <&gpio2 7 1>; - reset-active-low; - }; - }; - - i2c@3 { - reg = <3>; - #address-cells = <1>; - #size-cells = <0>; - - pca9555: pca9555@20 { - compatible = "nxp,pca9555"; - gpio-controller; - #gpio-cells = <2>; - reg = <0x20>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml new file mode 100644 index 000000000000..3e6ea59aea68 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml @@ -0,0 +1,124 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mux-gpmux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: General Purpose I2C Bus Mux + +maintainers: + - Peter Rosin + +description: |+ + This binding describes an I2C bus multiplexer that uses a mux controller + from the mux subsystem to route the I2C signals. + + .-----. .-----. + | dev | | dev | + .------------. '-----' '-----' + | SoC | | | + | | .--------+--------' + | .------. | .------+ child bus A, on MUX value set to 0 + | | I2C |-|--| Mux | + | '------' | '--+---+ child bus B, on MUX value set to 1 + | .------. | | '----------+--------+--------. + | | MUX- | | | | | | + | | Ctrl |-|-----+ .-----. .-----. .-----. + | '------' | | dev | | dev | | dev | + '------------' '-----' '-----' '-----' + + + +allOf: + - $ref: /schemas/i2c/i2c-mux.yaml# + +properties: + compatible: + const: i2c-mux + + i2c-parent: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the I2C bus that this multiplexer's master-side port is + connected to. + + mux-controls: + maxItems: 1 + description: + The mux-controller states are the I2C sub-bus numbers. + + mux-locked: + type: boolean + description: | + Explicitly allow unrelated I2C transactions on the parent I2C adapter at + these times: + + during setup of the multiplexer + + between setup of the multiplexer and the child bus I2C transaction + + between the child bus I2C transaction and releasing of the multiplexer + + during releasing of the multiplexer + + However, I2C transactions to devices behind all I2C multiplexers connected + to the same parent adapter that this multiplexer is connected to are blocked + for the full duration of the complete multiplexed I2C transaction (i.e. + including the times covered by the above list). + If mux-locked is not present, the multiplexer is assumed to be parent-locked. + This means that no unrelated I2C transactions are allowed on the parent I2C + adapter for the complete multiplexed I2C transaction. + The properties of mux-locked and parent-locked multiplexers are discussed + in more detail in Documentation/i2c/i2c-topology.rst. + +required: + - compatible + - i2c-parent + - mux-controls + +unevaluatedProperties: false + +examples: + - | + #include + mux: mux-controller { + compatible = "gpio-mux"; + #mux-control-cells = <0>; + + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>, + <&pioA 1 GPIO_ACTIVE_HIGH>; + }; + + i2c-mux { + compatible = "i2c-mux"; + mux-locked; + i2c-parent = <&i2c1>; + + mux-controls = <&mux>; + + #address-cells = <1>; + #size-cells = <0>; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + + i2c@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt index 8b1e49cdce3f..29c4550c9782 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-ltc4306.txt @@ -8,8 +8,8 @@ Required Properties: The following required properties are defined externally: - - Standard I2C mux properties. See i2c-mux.txt in this directory. - - I2C child bus nodes. See i2c-mux.txt in this directory. + - Standard I2C mux properties. See i2c-mux.yaml in this directory. + - I2C child bus nodes. See i2c-mux.yaml in this directory. Optional Properties: diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt index 33119a98e144..997a287ed3f6 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt @@ -28,9 +28,9 @@ Also required are: * Standard pinctrl properties that specify the pin mux state for each child bus. See ../pinctrl/pinctrl-bindings.txt. -* Standard I2C mux properties. See i2c-mux.txt in this directory. +* Standard I2C mux properties. See i2c-mux.yaml in this directory. -* I2C child bus nodes. See i2c-mux.txt in this directory. +* I2C child bus nodes. See i2c-mux.yaml in this directory. For each named state defined in the pinctrl-names property, an I2C child bus will be created. I2C child bus numbers are assigned based on the index into diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt index de00d7fc450b..b9d9755e4172 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt @@ -7,8 +7,8 @@ Required properties: - compatible: i2c-mux-reg - i2c-parent: The phandle of the I2C bus that this multiplexer's master-side port is connected to. -* Standard I2C mux properties. See i2c-mux.txt in this directory. -* I2C child bus nodes. See i2c-mux.txt in this directory. +* Standard I2C mux properties. See i2c-mux.yaml in this directory. +* I2C child bus nodes. See i2c-mux.yaml in this directory. Optional properties: - reg: this pair of specifies the register to control the mux. diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux.txt deleted file mode 100644 index b38f58a1c878..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-mux.txt +++ /dev/null @@ -1,73 +0,0 @@ -Common i2c bus multiplexer/switch properties. - -An i2c bus multiplexer/switch will have several child busses that are -numbered uniquely in a device dependent manner. The nodes for an i2c bus -multiplexer/switch will have one child node for each child bus. - -Optional properties: -- #address-cells = <1>; - This property is required if the i2c-mux child node does not exist. - -- #size-cells = <0>; - This property is required if the i2c-mux child node does not exist. - -- i2c-mux - For i2c multiplexers/switches that have child nodes that are a mixture - of both i2c child busses and other child nodes, the 'i2c-mux' subnode - can be used for populating the i2c child busses. If an 'i2c-mux' - subnode is present, only subnodes of this will be considered as i2c - child busses. - -Required properties for the i2c-mux child node: -- #address-cells = <1>; -- #size-cells = <0>; - -Required properties for i2c child bus nodes: -- #address-cells = <1>; -- #size-cells = <0>; -- reg : The sub-bus number. - -Optional properties for i2c child bus nodes: -- Other properties specific to the multiplexer/switch hardware. -- Child nodes conforming to i2c bus binding - - -Example : - - /* - An NXP pca9548 8 channel I2C multiplexer at address 0x70 - with two NXP pca8574 GPIO expanders attached, one each to - ports 3 and 4. - */ - - mux@70 { - compatible = "nxp,pca9548"; - reg = <0x70>; - #address-cells = <1>; - #size-cells = <0>; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <3>; - - gpio1: gpio@38 { - compatible = "nxp,pca8574"; - reg = <0x38>; - #gpio-cells = <2>; - gpio-controller; - }; - }; - i2c@4 { - #address-cells = <1>; - #size-cells = <0>; - reg = <4>; - - gpio2: gpio@38 { - compatible = "nxp,pca8574"; - reg = <0x38>; - #gpio-cells = <2>; - gpio-controller; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml new file mode 100644 index 000000000000..3aa4d84a6610 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mux.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Common i2c bus multiplexer/switch properties. + +maintainers: + - Peter Rosin + +description: |+ + An i2c bus multiplexer/switch will have several child busses that are numbered + uniquely in a device dependent manner. The nodes for an i2c bus + multiplexer/switch will have one child node for each child bus. + + For i2c multiplexers/switches that have child nodes that are a mixture of both + i2c child busses and other child nodes, the 'i2c-mux' subnode can be used for + populating the i2c child busses. If an 'i2c-mux' subnode is present, only + subnodes of this will be considered as i2c child busses. + +properties: + $nodename: + pattern: '^(i2c-?)?mux' + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^i2c@[0-9a-f]+$': + $ref: /schemas/i2c/i2c-controller.yaml + unevaluatedProperties: false + + properties: + reg: + description: The mux selector sub-bus number for the child I2C bus. + maxItems: 1 + +additionalProperties: true + +examples: + - | + /* + An NXP pca9548 8 channel I2C multiplexer at address 0x70 + with two NXP pca8574 GPIO expanders attached, one each to + ports 3 and 4. + */ + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c-mux@70 { + compatible = "nxp,pca9548"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + gpio@20 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x20>; + }; + }; + }; + }; +...