diff mbox series

[3/5] arm64: dts: qcom: msm8916-huawei-g7: Add sensors

Message ID 20210514104328.18756-3-stephan@gerhold.net
State Accepted
Commit 3305642dc44bcb85f13129c4214f283f7c3d71a4
Headers show
Series None | expand

Commit Message

Stephan Gerhold May 14, 2021, 10:43 a.m. UTC
The Huawei Ascend G7 has 3 sensors, all supported by existing kernel drivers:

  1. Kionix KX023-1025 accelerometer (kxcjk-1023)
  2. Asahi Kasei AK09911 magnetometer (ak8975)
  3. Avago APDS9930 proximity/light sensor (tsl2772)

Add them to the huawei-g7 device tree.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
 .../arm64/boot/dts/qcom/msm8916-huawei-g7.dts | 76 +++++++++++++++++++
 1 file changed, 76 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
index f928179f9ded..3b558dc9e90f 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts
@@ -85,6 +85,58 @@  usb_id: usb-id {
 	};
 };
 
+&blsp_i2c2 {
+	status = "okay";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak09911";
+		reg = <0x0c>;
+
+		vdd-supply = <&pm8916_l17>;
+		vid-supply = <&pm8916_l6>;
+
+		reset-gpios = <&msmgpio 36 GPIO_ACTIVE_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mag_reset_default>;
+	};
+
+	accelerometer@1e {
+		compatible = "kionix,kx023-1025";
+		reg = <0x1e>;
+
+		interrupt-parent = <&msmgpio>;
+		interrupts = <115 IRQ_TYPE_EDGE_RISING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_irq_default>;
+
+		mount-matrix = "-1", "0", "0",
+				"0", "1", "0",
+				"0", "0", "1";
+	};
+
+	proximity@39 {
+		compatible = "avago,apds9930";
+		reg = <0x39>;
+
+		interrupt-parent = <&msmgpio>;
+		interrupts = <113 IRQ_TYPE_EDGE_FALLING>;
+
+		vdd-supply = <&pm8916_l17>;
+		vddio-supply = <&pm8916_l6>;
+
+		led-max-microamp = <100000>;
+		amstaos,proximity-diodes = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&prox_irq_default>;
+	};
+};
+
 &blsp_i2c5 {
 	status = "okay";
 
@@ -278,6 +330,14 @@  l18 {
 };
 
 &msmgpio {
+	accel_irq_default: accel-irq-default {
+		pins = "gpio115";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	gpio_keys_default: gpio-keys-default {
 		pins = "gpio107";
 		function = "gpio";
@@ -294,6 +354,22 @@  gpio_leds_default: gpio-leds-default {
 		bias-disable;
 	};
 
+	mag_reset_default: mag-reset-default {
+		pins = "gpio36";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	prox_irq_default: prox-irq-default {
+		pins = "gpio113";
+		function = "gpio";
+
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	sdhc2_cd_default: sdhc2-cd-default {
 		pins = "gpio56";
 		function = "gpio";