diff mbox series

[RFC,1/2] iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers

Message ID 20210415114614.1071928-1-sean@geanix.com
State New
Headers show
Series [RFC,1/2] iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers | expand

Commit Message

Sean Nyekjaer April 15, 2021, 11:46 a.m. UTC
Add basic support for NXP FXLS8962AF/FXLS8964AF Automotive
accelerometers.
It will allow setting up scale/gain and reading x,y,z
axis.

Signed-off-by: Sean Nyekjaer <sean@geanix.com>
---
- Interrupt, buffered reads and events support is in the works.

 drivers/iio/accel/Kconfig           |  22 +
 drivers/iio/accel/Makefile          |   4 +
 drivers/iio/accel/fxls8962af-core.c | 739 ++++++++++++++++++++++++++++
 drivers/iio/accel/fxls8962af-i2c.c  |  67 +++
 drivers/iio/accel/fxls8962af-spi.c  |  72 +++
 drivers/iio/accel/fxls8962af.h      |  21 +
 6 files changed, 925 insertions(+)
 create mode 100644 drivers/iio/accel/fxls8962af-core.c
 create mode 100644 drivers/iio/accel/fxls8962af-i2c.c
 create mode 100644 drivers/iio/accel/fxls8962af-spi.c
 create mode 100644 drivers/iio/accel/fxls8962af.h

Comments

Lars-Peter Clausen April 15, 2021, 12:50 p.m. UTC | #1
On 4/15/21 1:46 PM, Sean Nyekjaer wrote:
> Add basic support for NXP FXLS8962AF/FXLS8964AF Automotive
> accelerometers.
> It will allow setting up scale/gain and reading x,y,z
> axis.

Hi,

Thanks for the patch. This looks very good!

>
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>
> ---
> - Interrupt, buffered reads and events support is in the works.
>
>   drivers/iio/accel/Kconfig           |  22 +
>   drivers/iio/accel/Makefile          |   4 +
>   drivers/iio/accel/fxls8962af-core.c | 739 ++++++++++++++++++++++++++++
>   drivers/iio/accel/fxls8962af-i2c.c  |  67 +++
>   drivers/iio/accel/fxls8962af-spi.c  |  72 +++
>   drivers/iio/accel/fxls8962af.h      |  21 +
>   6 files changed, 925 insertions(+)
>   create mode 100644 drivers/iio/accel/fxls8962af-core.c
>   create mode 100644 drivers/iio/accel/fxls8962af-i2c.c
>   create mode 100644 drivers/iio/accel/fxls8962af-spi.c
>   create mode 100644 drivers/iio/accel/fxls8962af.h
>
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index 2e0c62c39155..c4b42024de42 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -370,6 +370,28 @@ config MMA8452
>   	  To compile this driver as a module, choose M here: the module
>   	  will be called mma8452.
>   
> +config FXLS8962AF

We try to keep the entries in alphabetical order.

> +	tristate "NXP FXLS8962AF and similar Accelerometers Driver"
> +	select IIO_BUFFER
> +	select IIO_TRIGGERED_BUFFER
The driver does not yet make use of interrupts.
> +	select REGMAP
> +	select FXLS8962AF_I2C if I2C
> +	select FXLS8962AF_SPI if SPI
Usually we do this the other way around. Expose I2C and SPI support as 
independent config items and let them select the core. The reason is 
because I2C support can be built as a module. To be honest I'm not sure 
how exactly this will be have if I2C support is a module, but FXLS8962AF 
is built-in. It might actually work fine.
> +	help
> +	  Say yes here to build support for the NXP 3-axis automotive
> +	  accelerometer FXLS8962AF/FXLS8964AF.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called fxls8962af.
> +
> +config FXLS8962AF_I2C
> +	tristate
> +	select REGMAP_I2C
> +
> +config FXLS8962AF_SPI
> +	tristate
> +	select REGMAP_SPI
> +
>   config MMA9551_CORE
>   	tristate
>   
> diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
> index 4f6c1ebe13b0..3e48a9127863 100644
> --- a/drivers/iio/accel/Makefile
> +++ b/drivers/iio/accel/Makefile
> @@ -40,6 +40,10 @@ obj-$(CONFIG_MMA7660)	+= mma7660.o
>   
>   obj-$(CONFIG_MMA8452)	+= mma8452.o
>   
> +obj-$(CONFIG_FXLS8962AF)	+= fxls8962af-core.o
> +obj-$(CONFIG_FXLS8962AF_I2C)	+= fxls8962af-i2c.o
> +obj-$(CONFIG_FXLS8962AF_SPI)	+= fxls8962af-spi.o
We try to keep the entries in alphabetical order.
> +
>   obj-$(CONFIG_MMA9551_CORE)	+= mma9551_core.o
>   obj-$(CONFIG_MMA9551)		+= mma9551.o
>   obj-$(CONFIG_MMA9553)		+= mma9553.o
> diff --git a/drivers/iio/accel/fxls8962af-core.c b/drivers/iio/accel/fxls8962af-core.c
> new file mode 100644
> index 000000000000..daee5b07ca49
> --- /dev/null
> +++ b/drivers/iio/accel/fxls8962af-core.c
> @@ -0,0 +1,739 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2021 Connected Cars A/S
> + */
> +
> +#include <linux/module.h>
> +#include <linux/i2c.h>
No I2C in this driver.
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/delay.h>
> +#include <linux/of_device.h>
> +#include <linux/of_irq.h>
At least of_irq.h is unused
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/regmap.h>
> +
> +#include "fxls8962af.h"
> [...]
> +enum {
> +	idx_x,
> +	idx_y,
> +	idx_z,
> +	idx_ts,
Might want to put a prefix on these. idx_x is not that unique of an 
identifier.
> +};
> [...]
> +
> +static int fxls8962af_get_temp(struct fxls8962af_data *data, int *val)
> +{
> +	struct device *dev = regmap_get_device(data->regmap);
> +	int ret;
> +	unsigned int value;
> +
> +	mutex_lock(&data->lock);
> +
> +	ret = fxls8962af_drdy(data);
> +	if (ret < 0) {
> +		mutex_unlock(&data->lock);
> +		return ret;
> +	}
> +
> +	ret = fxls8962af_set_power_state(data, true);
> +	if (ret) {
> +		mutex_unlock(&data->lock);
> +		return ret;
> +	}
> +
> +	ret = regmap_read(data->regmap, FXLS8962AF_TEMP_OUT, &value);
> +	if (ret < 0) {
> +		dev_err(dev, "Error reading reg_temp\n");
> +		fxls8962af_set_power_state(data, false);
> +		mutex_unlock(&data->lock);
> +		return ret;
> +	}
> +
> +	ret = fxls8962af_set_power_state(data, false);
> +
> +	*val = sign_extend32(value, 7);
Doesn't really matter, but his could also be outside the locked section.
> +
> +	mutex_unlock(&data->lock);
> +	if (ret < 0)
> +		return ret;
> +
> +	return IIO_VAL_INT;
> +}
> [...]
> +static int fxls8962af_write_raw_get_fmt(struct iio_dev *indio_dev,
> +					struct iio_chan_spec const *chan,
> +					long mask)
> +{
> +	switch (mask) {
> +	case IIO_CHAN_INFO_SCALE:
> +		switch (chan->type) {
> +		case IIO_ACCEL:
> +			return IIO_VAL_INT_PLUS_NANO;
> +		default:
> +			return IIO_VAL_INT_PLUS_MICRO;
> +		}
> +	default:
> +		return IIO_VAL_INT_PLUS_MICRO;
> +	}
Since the driver only supports writing the accelerator scale this could 
be simplified to just return IIO_VAL_INT_PLUS_NANO.
> +}
> +
> +static IIO_DEVICE_ATTR(in_accel_scale_available, 0444,
> +		       fxls8962af_show_scale_avail, NULL, 0);
There is a new API to query the available values through the IIO API. 
This can be done by implementing the read_avail callback of the iio_info 
struct. This is the recommended method for new drivers rather than 
registering a sysfs attribute and do manually formatting of the scale.
> [...]
>
> +
> +static int fxls8962af_write_raw(struct iio_dev *indio_dev,
> +				struct iio_chan_spec const *chan,
> +				int val, int val2, long mask)
> +{
> +	struct fxls8962af_data *data = iio_priv(indio_dev);
> +	int ret;
> +
> +	ret = iio_device_claim_direct_mode(indio_dev);
> +	if (ret)
> +		return ret;
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_SCALE:
Should check that val is 0.
> +		ret = fxls8962af_set_full_scale(data, val2);
> +		break;
> +	default:
> +		ret = -EINVAL;
> +		break;
> +	}
> +
> +	iio_device_release_direct_mode(indio_dev);
> +	return ret;
> +}
> +
> +#define FXLS8962AF_CHANNEL(axis, idx) { \
> +	.type = IIO_ACCEL, \
> +	.modified = 1, \
> +	.channel2 = IIO_MOD_##axis, \
> +	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> +			      BIT(IIO_CHAN_INFO_CALIBBIAS), \
> +	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
> +			BIT(IIO_CHAN_INFO_SCALE) | \
> +			BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY) | \
> +			BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
Some of these attributes are not implemented yet.
> +	.scan_index = idx, \
> +	.scan_type = { \
> +		.sign = 's', \
> +		.realbits = 12, \
> +		.storagebits = 16, \
> +		.shift = 4, \
> +		.endianness = IIO_BE, \
> +	}, \
> +}
> +
> [...]
> +int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq,
> +			  const char *name)
> +{
> +	struct fxls8962af_data *data;
> +	struct iio_dev *indio_dev;
> +	unsigned int reg;
> +	int ret, i;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	data = iio_priv(indio_dev);
> +	dev_set_drvdata(dev, indio_dev);
> +	mutex_init(&data->lock);
> +	data->regmap = regmap;
> +
> +	ret = iio_read_mount_matrix(dev, "mount-matrix", &data->orientation);
> +	if (ret)
> +		return ret;
> +
> +	data->vdd_reg = devm_regulator_get_optional(dev, "vdd");
> +	if (IS_ERR(data->vdd_reg)) {
> +		if ((PTR_ERR(data->vdd_reg) != -ENODEV) && dev->of_node)
Why the check for of_node?
> +			return PTR_ERR(data->vdd_reg);
> +
> +		data->vdd_reg = NULL;
> +	} else {
> +		ret = regulator_enable(data->vdd_reg);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	ret = regmap_read(data->regmap, FXLS8962AF_WHO_AM_I, &reg);
> +	if (ret < 0)
> +		goto disable_regulators;
> +
> +	dev_dbg(dev, "Chip Id %x\n", reg);
> +	for (i = 0; i < ARRAY_SIZE(fxls_chip_info_table); i++) {
> +		if (fxls_chip_info_table[i].chip_id == reg) {
> +			data->chip_info = &fxls_chip_info_table[i];
> +			break;
> +		}
> +	}
> +
> +	indio_dev->channels = data->chip_info->channels;
> +	indio_dev->num_channels = data->chip_info->num_channels;
> +	indio_dev->name = name;
Since the driver identifies the chip based on the who-am-i register, I 
wonder if the name should also come from the chip_info_table.
> +	indio_dev->available_scan_masks = fxls8962af_scan_masks;
> +	indio_dev->info = &fxls8962af_info;
> +	indio_dev->modes = INDIO_DIRECT_MODE;
> +
> +	dev_info(dev, "registering %s accelerometer\n", name);
Its a bit of personal taste, but I don't like these 'driver has probed' 
messages. It is great for development, but not so great for production. 
If every device that gets registered prints such a message that does 
slow down boot a fair bit and clutters the boot log.
> +
> +	ret = fxls8962af_reset(data);
> +	if (ret < 0)
> +		goto disable_regulators;
> +
> +	ret = pm_runtime_set_active(dev);
> +	if (ret < 0)
> +		goto disable_regulators;
> +
> +	pm_runtime_enable(dev);
> +	pm_runtime_set_autosuspend_delay(dev, FXLS8962AF_AUTO_SUSPEND_DELAY_MS);
> +	pm_runtime_use_autosuspend(dev);
> +
> +	ret = iio_device_register(indio_dev);
> +	if (ret < 0)
> +		goto disable_regulators;
> +
> +	return 0;
> +
> + disable_regulators:
> +	if (data->vdd_reg)
> +		regulator_disable(data->vdd_reg);
> +
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(fxls8962af_core_probe);
> +
> [...]
> +#ifdef CONFIG_PM
> [...]
> +static int fxls8962af_runtime_resume(struct device *dev)
> +{
> +	struct iio_dev *indio_dev = dev_get_drvdata(dev);
> +	struct fxls8962af_data *data = iio_priv(indio_dev);
> +	int ret;
> +
> +	if (data->vdd_reg) {
> +		ret = regulator_disable(data->vdd_reg);
Should be regulator_enable()?
> +		if (ret) {
> +			dev_err(dev, "failed to disable VDD regulator\n");
> +			return ret;
> +		}
> +	}
> +
> +	ret = fxls8962af_active(data);
> +	if (ret < 0)
> +		goto runtime_resume_failed;
> +
> +	return 0;
> +
> + runtime_resume_failed:
> +	if (data->vdd_reg)
> +		regulator_disable(data->vdd_reg);
> +
> +	return ret;
> +}
> +#endif
> [...]
> diff --git a/drivers/iio/accel/fxls8962af-i2c.c b/drivers/iio/accel/fxls8962af-i2c.c
> new file mode 100644
> index 000000000000..4cdbd9793df7
> --- /dev/null
> +++ b/drivers/iio/accel/fxls8962af-i2c.c
> @@ -0,0 +1,67 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2021 Connected Cars A/S
> + */
> +
> +#include <linux/device.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/acpi.h>
No ACPI in this file.
> +#include <linux/regmap.h>
> +
> +#include "fxls8962af.h"
> +
> +static int fxls8962af_probe(struct i2c_client *client,
> +			    const struct i2c_device_id *id)
> +{
> +	struct regmap *regmap;
> +	const char *name = NULL;
> +
> +	regmap = devm_regmap_init_i2c(client, &fxls8962af_regmap_conf);
> +	if (IS_ERR(regmap)) {
> +		dev_err(&client->dev, "Failed to initialize i2c regmap\n");
> +		return PTR_ERR(regmap);
> +	}
> +
> +	if (id)
> +		name = id->name;
> +
> +	return fxls8962af_core_probe(&client->dev, regmap, client->irq, name);
> +}
> +
> +static int fxls8962af_remove(struct i2c_client *client)
> +{
> +	return fxls8962af_core_remove(&client->dev);
> +}
> +
> +static const struct i2c_device_id fxls8962af_id[] = {
> +	{"fxls8962af", fxls8962af},
> +	{"fxls8964af", fxls8964af},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(i2c, fxls8962af_id);
> +
> +static const struct of_device_id fxls8962af_of_match[] = {
> +	{.compatible = "nxp,fxls8962af"},
> +	{.compatible = "nxp,fxls8964af"},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, fxls8962af_of_match);
> +
> +static struct i2c_driver fxls8962af_driver = {
> +	.driver = {
> +		   .name = "fxls8962af_i2c",
> +		   .of_match_table = fxls8962af_of_match,
> +		   .pm = &fxls8962af_pm_ops,
> +		   },
> +	.probe = fxls8962af_probe,
For new i2C drivers use the probe_new callback.
> +	.remove = fxls8962af_remove,
> +	.id_table = fxls8962af_id,
> +};
> +
> +module_i2c_driver(fxls8962af_driver);
> +
> +MODULE_AUTHOR("Sean Nyekjaer <sean@geanix.com>");
> +MODULE_DESCRIPTION("NXP FXLS8962AF/FXLS8964AF accelerometer driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/accel/fxls8962af-spi.c b/drivers/iio/accel/fxls8962af-spi.c
> new file mode 100644
> index 000000000000..976851863e82
> --- /dev/null
> +++ b/drivers/iio/accel/fxls8962af-spi.c
> @@ -0,0 +1,72 @@
> [...]
For the I2C driver you are using a global regmap config, but for the SPI 
one a local. Looks to me as if the gobal one can also be used for the 
SPI driver.
> +static int fxls8962af_probe(struct spi_device *spi)
> +{
> +	const struct spi_device_id *id = spi_get_device_id(spi);
> +	struct regmap *regmap;
> +	const char *name = NULL;
> +
> +	regmap = devm_regmap_init_spi(spi, &fxls8962af_spi_regmap_config);
> +	if (IS_ERR(regmap)) {
> +		dev_err(&spi->dev, "Failed to register spi regmap %d\n",
> +			(int)PTR_ERR(regmap));
%ld and drop the cast.
> +		return PTR_ERR(regmap);
> +	}
> +
> +	if (id)
> +		name = id->name;
> +
> +	return fxls8962af_core_probe(&spi->dev, regmap, spi->irq, name);
> +}
> +
> +static int fxls8962af_remove(struct spi_device *spi)
> +{
> +	return fxls8962af_core_remove(&spi->dev);
> +}
Rob Herring (Arm) April 15, 2021, 3:28 p.m. UTC | #2
On Thu, Apr 15, 2021 at 01:46:14PM +0200, Sean Nyekjaer wrote:
> Add devicetree binding for the NXP FXLS8962AF/FXLS8962AF
> accelerometer sensor.
> 
> Signed-off-by: Sean Nyekjaer <sean@geanix.com>
> ---
>  .../bindings/iio/accel/nxp,fxls8962af.yaml    | 66 +++++++++++++++++++
>  1 file changed, 66 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
> new file mode 100644
> index 000000000000..8cf099c75d1f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
> @@ -0,0 +1,66 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accel/nxp,fxls8962af.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP FXLS8962AF/FXLS8964AF Accelerometer driver
> +
> +maintainers:
> +  - Sean Nyekjaer <sean@geanix.com>
> +
> +description: |
> +  NXP FXLS8962AF/FXLS8964AF Accelerometer driver that supports
> +  SPI and I2C interface.
> +    https://www.nxp.com/docs/en/data-sheet/FXLS8962AF.pdf
> +    https://www.nxp.com/docs/en/data-sheet/FXLS8964AF.pdf
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - const: nxp,fxls8962af
> +          - const: nxp,fxls8964af
> +      - enum:
> +          - nxp,fxls8962af
> +          - nxp,fxls8964af

That's needlessly complicated. Either nxp,fxls8962af has a fallback or 
it doesn't.

blank line needed here too.

> +  reg:
> +    maxItems: 1
> +
> +  vdd-supply:
> +    description: phandle to the regulator that provides power to the accelerometer
> +
> +  spi-max-frequency: true
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    i2c0 {
> +        /* Example for a I2C device node */
> +        accelerometer@2a {
> +            compatible = "nxp,fxls8962af";
> +            reg = <0x62>;
> +            interrupt-parent = <&gpio0>;
> +            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +        };
> +    };
> +  - |
> +    spi0 {
> +        /* Example for a SPI device node */
> +        accelerometer@0 {
> +            compatible = "nxp,fxls8962af";
> +            reg = <0>;
> +            spi-max-frequency = <4000000>;
> +            interrupt-parent = <&gpio0>;
> +            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> +        };
> +    };
> -- 
> 2.31.0
>
diff mbox series

Patch

diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 2e0c62c39155..c4b42024de42 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -370,6 +370,28 @@  config MMA8452
 	  To compile this driver as a module, choose M here: the module
 	  will be called mma8452.
 
+config FXLS8962AF
+	tristate "NXP FXLS8962AF and similar Accelerometers Driver"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP
+	select FXLS8962AF_I2C if I2C
+	select FXLS8962AF_SPI if SPI
+	help
+	  Say yes here to build support for the NXP 3-axis automotive
+	  accelerometer FXLS8962AF/FXLS8964AF.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called fxls8962af.
+
+config FXLS8962AF_I2C
+	tristate
+	select REGMAP_I2C
+
+config FXLS8962AF_SPI
+	tristate
+	select REGMAP_SPI
+
 config MMA9551_CORE
 	tristate
 
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 4f6c1ebe13b0..3e48a9127863 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -40,6 +40,10 @@  obj-$(CONFIG_MMA7660)	+= mma7660.o
 
 obj-$(CONFIG_MMA8452)	+= mma8452.o
 
+obj-$(CONFIG_FXLS8962AF)	+= fxls8962af-core.o
+obj-$(CONFIG_FXLS8962AF_I2C)	+= fxls8962af-i2c.o
+obj-$(CONFIG_FXLS8962AF_SPI)	+= fxls8962af-spi.o
+
 obj-$(CONFIG_MMA9551_CORE)	+= mma9551_core.o
 obj-$(CONFIG_MMA9551)		+= mma9551.o
 obj-$(CONFIG_MMA9553)		+= mma9553.o
diff --git a/drivers/iio/accel/fxls8962af-core.c b/drivers/iio/accel/fxls8962af-core.c
new file mode 100644
index 000000000000..daee5b07ca49
--- /dev/null
+++ b/drivers/iio/accel/fxls8962af-core.c
@@ -0,0 +1,739 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Connected Cars A/S
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regmap.h>
+
+#include "fxls8962af.h"
+
+#define FXLS8962AF_INT_STATUS			0x00
+#define FXLS8962AF_INT_STATUS_SRC_DRDY		BIT(7)
+#define FXLS8962AF_TEMP_OUT			0x01
+#define FXLS8962AF_VECM_LSB			0x02
+#define FXLS8962AF_OUT_X_LSB			0x04
+#define FXLS8962AF_OUT_Y_LSB			0x06
+#define FXLS8962AF_OUT_Z_LSB			0x08
+#define FXLS8962AF_BUF_STATUS			0x0b
+#define FXLS8962AF_BUF_X_LSB			0x0c
+#define FXLS8962AF_BUF_Y_LSB			0x0e
+#define FXLS8962AF_BUF_Z_LSB			0x10
+
+#define FXLS8962AF_PROD_REV			0x12
+#define FXLS8962AF_WHO_AM_I			0x13
+
+#define FXLS8962AF_SYS_MODE			0x14
+#define FXLS8962AF_SENS_CONFIG1			0x15
+#define FXLS8962AF_SENS_CONFIG1_ACTIVE		BIT(0)
+#define FXLS8962AF_SENS_CONFIG1_RST		BIT(7)
+#define FXLS8962AF_FSR_2G			0x0
+#define FXLS8962AF_FSR_4G			0x2
+#define FXLS8962AF_FSR_8G			0x4
+#define FXLS8962AF_FSR_16G			0x6
+#define FXLS8962AF_FSR_MASK			(BIT(2) | BIT(1))
+
+#define FXLS8962AF_SENS_CONFIG2			0x16
+#define FXLS8962AF_SENS_CONFIG3			0x17
+#define FXLS8962AF_SENS_CONFIG4			0x18
+#define FXLS8962AF_SENS_CONFIG5			0x19
+
+#define FXLS8962AF_WAKE_IDLE_LSB		0x1b
+#define FXLS8962AF_SLEEP_IDLE_LSB		0x1c
+#define FXLS8962AF_ASLP_COUNT_LSB		0x1e
+
+#define FXLS8962AF_INT_EN			0x20
+#define FXLS8962AF_INT_PIN_SEL			0x21
+
+#define FXLS8962AF_OFF_X			0x22
+#define FXLS8962AF_OFF_Y			0x23
+#define FXLS8962AF_OFF_Z			0x24
+
+#define FXLS8962AF_BUF_CONFIG1			0x26
+#define FXLS8962AF_BUF_CONFIG2			0x27
+
+#define FXLS8962AF_ORIENT_STATUS		0x28
+#define FXLS8962AF_ORIENT_CONFIG		0x29
+#define FXLS8962AF_ORIENT_DBCOUNT		0x2a
+#define FXLS8962AF_ORIENT_BF_ZCOMP		0x2b
+#define FXLS8962AF_ORIENT_THS_REG		0x2c
+
+#define FXLS8962AF_SDCD_INT_SRC1		0x2d
+#define FXLS8962AF_SDCD_INT_SRC2		0x2e
+#define FXLS8962AF_SDCD_CONFIG1			0x2f
+#define FXLS8962AF_SDCD_CONFIG2			0x30
+#define FXLS8962AF_SDCD_OT_DBCNT		0x31
+#define FXLS8962AF_SDCD_WT_DBCNT		0x32
+#define FXLS8962AF_SDCD_LTHS_LSB		0x33
+#define FXLS8962AF_SDCD_UTHS_LSB		0x35
+
+#define FXLS8962AF_SELF_TEST_CONFIG1		0x37
+#define FXLS8962AF_SELF_TEST_CONFIG2		0x38
+
+#define FXLS8962AF_MAX_REG			0x38
+
+#define FXLS8962AF_DEVICE_ID			0x62
+#define FXLS8964AF_DEVICE_ID			0x84
+
+#define FXLS8962AF_TEMP_CENTER_VAL		25
+
+#define FXLS8962AF_AXIS_TO_REG(axis)		(FXLS8962AF_BUF_X_LSB + (axis * 2))
+#define FXLS8962AF_AUTO_SUSPEND_DELAY_MS	2000
+
+#define FXLS8962AF_SCALE_TABLE_LEN		4
+
+struct fxls8962af_scale_info {
+	unsigned int scale;
+	u8 reg_value;
+};
+
+struct fxls8962af_chip_info {
+	u8 chip_id;
+	const struct iio_chan_spec *channels;
+	int num_channels;
+	const struct fxls8962af_scale_info
+	    scale_table[FXLS8962AF_SCALE_TABLE_LEN];
+	int all_events;
+	int enabled_events;
+};
+
+struct fxls8962af_data {
+	struct regmap *regmap;
+	struct mutex lock;
+	const struct fxls8962af_chip_info *chip_info;
+	struct regulator *vdd_reg;
+	struct iio_mount_matrix orientation;
+};
+
+const struct regmap_config fxls8962af_regmap_conf = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = FXLS8962AF_MAX_REG,
+};
+EXPORT_SYMBOL_GPL(fxls8962af_regmap_conf);
+
+enum {
+	idx_x,
+	idx_y,
+	idx_z,
+	idx_ts,
+};
+
+static int fxls8962af_drdy(struct fxls8962af_data *data)
+{
+	int tries = 150, ret;
+	unsigned int reg;
+	struct device *dev = regmap_get_device(data->regmap);
+
+	while (tries-- > 0) {
+		ret = regmap_read(data->regmap, FXLS8962AF_INT_STATUS, &reg);
+		if (ret < 0)
+			return ret;
+
+		if ((reg & FXLS8962AF_INT_STATUS_SRC_DRDY) ==
+		    FXLS8962AF_INT_STATUS_SRC_DRDY)
+			return 0;
+
+		msleep(20);
+	}
+
+	dev_err(dev, "data not ready\n");
+
+	return -EIO;
+}
+
+static int fxls8962af_set_power_state(struct fxls8962af_data *data, bool on)
+{
+#ifdef CONFIG_PM
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+
+	if (on) {
+		ret = pm_runtime_get_sync(dev);
+	} else {
+		pm_runtime_mark_last_busy(dev);
+		ret = pm_runtime_put_autosuspend(dev);
+	}
+
+	if (ret < 0) {
+		dev_err(dev, "failed to change power state to %d\n", on);
+		if (on)
+			pm_runtime_put_noidle(dev);
+
+		return ret;
+	}
+#endif
+
+	return 0;
+}
+
+static int fxls8962af_get_temp(struct fxls8962af_data *data, int *val)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+	unsigned int value;
+
+	mutex_lock(&data->lock);
+
+	ret = fxls8962af_drdy(data);
+	if (ret < 0) {
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+
+	ret = fxls8962af_set_power_state(data, true);
+	if (ret) {
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+
+	ret = regmap_read(data->regmap, FXLS8962AF_TEMP_OUT, &value);
+	if (ret < 0) {
+		dev_err(dev, "Error reading reg_temp\n");
+		fxls8962af_set_power_state(data, false);
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+
+	ret = fxls8962af_set_power_state(data, false);
+
+	*val = sign_extend32(value, 7);
+
+	mutex_unlock(&data->lock);
+	if (ret < 0)
+		return ret;
+
+	return IIO_VAL_INT;
+}
+
+static int fxls8962af_get_axis(struct fxls8962af_data *data,
+			       struct iio_chan_spec const *chan, int *val)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int axis = chan->scan_index;
+	int ret;
+	__le16 raw_val;
+
+	mutex_lock(&data->lock);
+
+	ret = fxls8962af_drdy(data);
+	if (ret < 0) {
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+
+	ret = fxls8962af_set_power_state(data, true);
+	if (ret) {
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+
+	ret = regmap_bulk_read(data->regmap, FXLS8962AF_AXIS_TO_REG(axis),
+			       &raw_val, sizeof(raw_val));
+	if (ret < 0) {
+		dev_err(dev, "failed to read axes\n");
+		fxls8962af_set_power_state(data, false);
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+
+	ret = fxls8962af_set_power_state(data, false);
+
+	mutex_unlock(&data->lock);
+	*val = sign_extend32(le16_to_cpu(raw_val),
+			     chan->scan_type.realbits - 1);
+	if (ret < 0)
+		return ret;
+
+	return IIO_VAL_INT;
+}
+
+static ssize_t fxls8962af_show_scale_avail(struct device *dev,
+					   struct device_attribute *attr,
+					   char *buf)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct fxls8962af_data *data = iio_priv(indio_dev);
+	int i, len = 0;
+
+	for (i = 0; i < FXLS8962AF_SCALE_TABLE_LEN; i++)
+		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%09u ",
+				 data->chip_info->scale_table[i].scale);
+
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static int fxls8962af_write_raw_get_fmt(struct iio_dev *indio_dev,
+					struct iio_chan_spec const *chan,
+					long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ACCEL:
+			return IIO_VAL_INT_PLUS_NANO;
+		default:
+			return IIO_VAL_INT_PLUS_MICRO;
+		}
+	default:
+		return IIO_VAL_INT_PLUS_MICRO;
+	}
+}
+
+static IIO_DEVICE_ATTR(in_accel_scale_available, 0444,
+		       fxls8962af_show_scale_avail, NULL, 0);
+
+static int fxls8962af_standby(struct fxls8962af_data *data)
+{
+	return regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
+				  FXLS8962AF_SENS_CONFIG1_ACTIVE, 0);
+}
+
+static int fxls8962af_active(struct fxls8962af_data *data)
+{
+	return regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
+				  FXLS8962AF_SENS_CONFIG1_ACTIVE, 1);
+}
+
+/* returns >0 if active, 0 if in standby and <0 on error */
+static int fxls8962af_is_active(struct fxls8962af_data *data)
+{
+	unsigned int reg;
+	int ret;
+
+	ret = regmap_read(data->regmap, FXLS8962AF_SENS_CONFIG1, &reg);
+	if (ret < 0)
+		return ret;
+
+	return reg & FXLS8962AF_SENS_CONFIG1_ACTIVE;
+}
+
+static int fxls8962af_update_config(struct fxls8962af_data *data, u8 reg,
+				    u8 mask, u8 val)
+{
+	int ret;
+	int is_active;
+
+	mutex_lock(&data->lock);
+
+	is_active = fxls8962af_is_active(data);
+	if (is_active < 0) {
+		ret = is_active;
+		goto fail;
+	}
+
+	/* config can only be changed when in standby */
+	if (is_active > 0) {
+		ret = fxls8962af_standby(data);
+		if (ret < 0)
+			goto fail;
+	}
+
+	ret = regmap_update_bits(data->regmap, reg, mask, val);
+	if (ret < 0)
+		goto fail;
+
+	if (is_active > 0) {
+		ret = fxls8962af_active(data);
+		if (ret < 0)
+			goto fail;
+	}
+
+	ret = 0;
+ fail:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int fxls8962af_set_full_scale(struct fxls8962af_data *data, u32 scale)
+{
+	int i;
+
+	for (i = 0; i < FXLS8962AF_SCALE_TABLE_LEN; i++) {
+		if (data->chip_info->scale_table[i].scale == scale)
+			break;
+	}
+
+	if (i == FXLS8962AF_SCALE_TABLE_LEN)
+		return -EINVAL;
+
+	return fxls8962af_update_config(data, FXLS8962AF_SENS_CONFIG1,
+					FXLS8962AF_FSR_MASK,
+					data->chip_info->scale_table[i].reg_value);
+}
+
+static unsigned int fxls8962af_read_full_scale(struct fxls8962af_data *data,
+					       int *val)
+{
+	int i, ret;
+	unsigned int reg;
+
+	ret = regmap_read(data->regmap, FXLS8962AF_SENS_CONFIG1, &reg);
+	if (ret < 0)
+		return ret;
+
+	reg &= FXLS8962AF_FSR_MASK;
+
+	for (i = 0; i < FXLS8962AF_SCALE_TABLE_LEN; i++)
+		if (data->chip_info->scale_table[i].reg_value == reg)
+			break;
+
+	if (i == FXLS8962AF_SCALE_TABLE_LEN)
+		return -EINVAL;
+
+	*val = data->chip_info->scale_table[i].scale;
+
+	return IIO_VAL_INT_PLUS_NANO;
+}
+
+static int fxls8962af_read_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int *val, int *val2, long mask)
+{
+	struct fxls8962af_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		switch (chan->type) {
+		case IIO_TEMP:
+			ret = fxls8962af_get_temp(data, val);
+			break;
+		case IIO_ACCEL:
+			ret = fxls8962af_get_axis(data, chan, val);
+			break;
+		default:
+			ret = -EINVAL;
+		}
+
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_OFFSET:
+		if (chan->type == IIO_TEMP) {
+			*val = FXLS8962AF_TEMP_CENTER_VAL;
+			return IIO_VAL_INT;
+		} else {
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		ret = fxls8962af_read_full_scale(data, val2);
+		return ret;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int fxls8962af_write_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan,
+				int val, int val2, long mask)
+{
+	struct fxls8962af_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		ret = fxls8962af_set_full_scale(data, val2);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	iio_device_release_direct_mode(indio_dev);
+	return ret;
+}
+
+#define FXLS8962AF_CHANNEL(axis, idx) { \
+	.type = IIO_ACCEL, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_##axis, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			      BIT(IIO_CHAN_INFO_CALIBBIAS), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
+			BIT(IIO_CHAN_INFO_SCALE) | \
+			BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY) | \
+			BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
+	.scan_index = idx, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = 12, \
+		.storagebits = 16, \
+		.shift = 4, \
+		.endianness = IIO_BE, \
+	}, \
+}
+
+#define FXLS8962AF_TEMP_CHANNEL { \
+	.type = IIO_TEMP, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			      BIT(IIO_CHAN_INFO_OFFSET),\
+	.scan_index = -1, \
+	.scan_type = { \
+		.sign = 's', \
+		.realbits = 8, \
+		.storagebits = 16, \
+	}, \
+}
+
+static const struct iio_chan_spec fxls8962af_channels[] = {
+	FXLS8962AF_CHANNEL(X, idx_x),
+	FXLS8962AF_CHANNEL(Y, idx_y),
+	FXLS8962AF_CHANNEL(Z, idx_z),
+	IIO_CHAN_SOFT_TIMESTAMP(idx_ts),
+	FXLS8962AF_TEMP_CHANNEL,
+};
+
+static const struct fxls8962af_chip_info fxls_chip_info_table[] = {
+	[fxls8962af] = {
+		.chip_id = FXLS8962AF_DEVICE_ID,
+		.channels = fxls8962af_channels,
+		.num_channels = ARRAY_SIZE(fxls8962af_channels),
+		.scale_table = {
+			 {IIO_G_TO_M_S_2(980000), FXLS8962AF_FSR_2G},
+			 {IIO_G_TO_M_S_2(1950000), FXLS8962AF_FSR_4G},
+			 {IIO_G_TO_M_S_2(3910000), FXLS8962AF_FSR_8G},
+			 {IIO_G_TO_M_S_2(7810000), FXLS8962AF_FSR_16G}},
+			},
+	[fxls8964af] = {
+		.chip_id = FXLS8964AF_DEVICE_ID,
+		.channels = fxls8962af_channels,
+		.num_channels = ARRAY_SIZE(fxls8962af_channels),
+		.scale_table = {
+			 {IIO_G_TO_M_S_2(980000), FXLS8962AF_FSR_2G},
+			 {IIO_G_TO_M_S_2(1950000), FXLS8962AF_FSR_4G},
+			 {IIO_G_TO_M_S_2(3910000), FXLS8962AF_FSR_8G},
+			 {IIO_G_TO_M_S_2(7810000), FXLS8962AF_FSR_16G}},
+			},
+};
+
+static struct attribute *fxls8962af_attributes[] = {
+	&iio_dev_attr_in_accel_scale_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group fxls8962af_group = {
+	.attrs = fxls8962af_attributes,
+};
+
+static const struct iio_info fxls8962af_info = {
+	.attrs = &fxls8962af_group,
+	.read_raw = &fxls8962af_read_raw,
+	.write_raw = &fxls8962af_write_raw,
+	.write_raw_get_fmt = fxls8962af_write_raw_get_fmt,
+};
+
+static const unsigned long fxls8962af_scan_masks[] = { 0x7, 0 };
+
+static int fxls8962af_reset(struct fxls8962af_data *data)
+{
+	int i, ret;
+	unsigned int reg;
+
+	ret = regmap_update_bits(data->regmap, FXLS8962AF_SENS_CONFIG1,
+				 FXLS8962AF_SENS_CONFIG1_RST,
+				 FXLS8962AF_SENS_CONFIG1_RST);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < 10; i++) {
+		usleep_range(100, 200);
+		ret = regmap_read(data->regmap, FXLS8962AF_SENS_CONFIG1, &reg);
+		if (ret == -EIO)
+			continue;	/* I2C comm reset */
+		if (ret < 0)
+			return ret;
+		if (!(reg & FXLS8962AF_SENS_CONFIG1_RST))
+			return 0;
+	}
+
+	return -ETIMEDOUT;
+}
+
+int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq,
+			  const char *name)
+{
+	struct fxls8962af_data *data;
+	struct iio_dev *indio_dev;
+	unsigned int reg;
+	int ret, i;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	dev_set_drvdata(dev, indio_dev);
+	mutex_init(&data->lock);
+	data->regmap = regmap;
+
+	ret = iio_read_mount_matrix(dev, "mount-matrix", &data->orientation);
+	if (ret)
+		return ret;
+
+	data->vdd_reg = devm_regulator_get_optional(dev, "vdd");
+	if (IS_ERR(data->vdd_reg)) {
+		if ((PTR_ERR(data->vdd_reg) != -ENODEV) && dev->of_node)
+			return PTR_ERR(data->vdd_reg);
+
+		data->vdd_reg = NULL;
+	} else {
+		ret = regulator_enable(data->vdd_reg);
+		if (ret)
+			return ret;
+	}
+
+	ret = regmap_read(data->regmap, FXLS8962AF_WHO_AM_I, &reg);
+	if (ret < 0)
+		goto disable_regulators;
+
+	dev_dbg(dev, "Chip Id %x\n", reg);
+	for (i = 0; i < ARRAY_SIZE(fxls_chip_info_table); i++) {
+		if (fxls_chip_info_table[i].chip_id == reg) {
+			data->chip_info = &fxls_chip_info_table[i];
+			break;
+		}
+	}
+
+	indio_dev->channels = data->chip_info->channels;
+	indio_dev->num_channels = data->chip_info->num_channels;
+	indio_dev->name = name;
+	indio_dev->available_scan_masks = fxls8962af_scan_masks;
+	indio_dev->info = &fxls8962af_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	dev_info(dev, "registering %s accelerometer\n", name);
+
+	ret = fxls8962af_reset(data);
+	if (ret < 0)
+		goto disable_regulators;
+
+	ret = pm_runtime_set_active(dev);
+	if (ret < 0)
+		goto disable_regulators;
+
+	pm_runtime_enable(dev);
+	pm_runtime_set_autosuspend_delay(dev, FXLS8962AF_AUTO_SUSPEND_DELAY_MS);
+	pm_runtime_use_autosuspend(dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto disable_regulators;
+
+	return 0;
+
+ disable_regulators:
+	if (data->vdd_reg)
+		regulator_disable(data->vdd_reg);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(fxls8962af_core_probe);
+
+int fxls8962af_core_remove(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct fxls8962af_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_put_noidle(dev);
+
+	fxls8962af_standby(iio_priv(indio_dev));
+
+	if (data->vdd_reg)
+		regulator_disable(data->vdd_reg);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fxls8962af_core_remove);
+
+#ifdef CONFIG_PM
+static int fxls8962af_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct fxls8962af_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = fxls8962af_standby(data);
+	mutex_unlock(&data->lock);
+	if (ret < 0) {
+		dev_err(dev, "powering off device failed\n");
+		return -EAGAIN;
+	}
+
+	if (data->vdd_reg) {
+		ret = regulator_disable(data->vdd_reg);
+		if (ret) {
+			dev_err(dev, "failed to disable VDD regulator\n");
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int fxls8962af_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct fxls8962af_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (data->vdd_reg) {
+		ret = regulator_disable(data->vdd_reg);
+		if (ret) {
+			dev_err(dev, "failed to disable VDD regulator\n");
+			return ret;
+		}
+	}
+
+	ret = fxls8962af_active(data);
+	if (ret < 0)
+		goto runtime_resume_failed;
+
+	return 0;
+
+ runtime_resume_failed:
+	if (data->vdd_reg)
+		regulator_disable(data->vdd_reg);
+
+	return ret;
+}
+#endif
+
+const struct dev_pm_ops fxls8962af_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	    SET_RUNTIME_PM_OPS(fxls8962af_runtime_suspend,
+			       fxls8962af_runtime_resume, NULL)
+};
+EXPORT_SYMBOL_GPL(fxls8962af_pm_ops);
+
+MODULE_AUTHOR("Sean Nyekjaer <sean@geanix.com>");
+MODULE_DESCRIPTION("NXP FXLS8962AF/FXLS8964AF accelerometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/fxls8962af-i2c.c b/drivers/iio/accel/fxls8962af-i2c.c
new file mode 100644
index 000000000000..4cdbd9793df7
--- /dev/null
+++ b/drivers/iio/accel/fxls8962af-i2c.c
@@ -0,0 +1,67 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Connected Cars A/S
+ */
+
+#include <linux/device.h>
+#include <linux/mod_devicetable.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/regmap.h>
+
+#include "fxls8962af.h"
+
+static int fxls8962af_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct regmap *regmap;
+	const char *name = NULL;
+
+	regmap = devm_regmap_init_i2c(client, &fxls8962af_regmap_conf);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Failed to initialize i2c regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	if (id)
+		name = id->name;
+
+	return fxls8962af_core_probe(&client->dev, regmap, client->irq, name);
+}
+
+static int fxls8962af_remove(struct i2c_client *client)
+{
+	return fxls8962af_core_remove(&client->dev);
+}
+
+static const struct i2c_device_id fxls8962af_id[] = {
+	{"fxls8962af", fxls8962af},
+	{"fxls8964af", fxls8964af},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, fxls8962af_id);
+
+static const struct of_device_id fxls8962af_of_match[] = {
+	{.compatible = "nxp,fxls8962af"},
+	{.compatible = "nxp,fxls8964af"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, fxls8962af_of_match);
+
+static struct i2c_driver fxls8962af_driver = {
+	.driver = {
+		   .name = "fxls8962af_i2c",
+		   .of_match_table = fxls8962af_of_match,
+		   .pm = &fxls8962af_pm_ops,
+		   },
+	.probe = fxls8962af_probe,
+	.remove = fxls8962af_remove,
+	.id_table = fxls8962af_id,
+};
+
+module_i2c_driver(fxls8962af_driver);
+
+MODULE_AUTHOR("Sean Nyekjaer <sean@geanix.com>");
+MODULE_DESCRIPTION("NXP FXLS8962AF/FXLS8964AF accelerometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/fxls8962af-spi.c b/drivers/iio/accel/fxls8962af-spi.c
new file mode 100644
index 000000000000..976851863e82
--- /dev/null
+++ b/drivers/iio/accel/fxls8962af-spi.c
@@ -0,0 +1,72 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Connected Cars A/S
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+
+#include "fxls8962af.h"
+
+static const struct regmap_config fxls8962af_spi_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int fxls8962af_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct regmap *regmap;
+	const char *name = NULL;
+
+	regmap = devm_regmap_init_spi(spi, &fxls8962af_spi_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "Failed to register spi regmap %d\n",
+			(int)PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	if (id)
+		name = id->name;
+
+	return fxls8962af_core_probe(&spi->dev, regmap, spi->irq, name);
+}
+
+static int fxls8962af_remove(struct spi_device *spi)
+{
+	return fxls8962af_core_remove(&spi->dev);
+}
+
+static const struct of_device_id fxls8962af_spi_of_match[] = {
+	{.compatible = "nxp,fxls8962af",},
+	{.compatible = "nxp,fxls8964af",},
+	{},
+};
+MODULE_DEVICE_TABLE(of, fxls8962af_spi_of_match);
+
+static const struct spi_device_id fxls8962af_spi_id_table[] = {
+	{"fxls8962af", fxls8962af},
+	{"fxls8964af", fxls8964af},
+	{},
+};
+MODULE_DEVICE_TABLE(spi, fxls8962af_spi_id_table);
+
+static struct spi_driver fxls8962af_driver = {
+	.driver = {
+		   .name = "fxls8962af_spi",
+		   .pm = &fxls8962af_pm_ops,
+		   .of_match_table = fxls8962af_spi_of_match,
+		   },
+	.probe = fxls8962af_probe,
+	.remove = fxls8962af_remove,
+	.id_table = fxls8962af_spi_id_table,
+};
+
+module_spi_driver(fxls8962af_driver);
+
+MODULE_AUTHOR("Sean Nyekjaer <sean@geanix.com>");
+MODULE_DESCRIPTION("NXP FXLS8962AF/FXLS8964AF accelerometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/fxls8962af.h b/drivers/iio/accel/fxls8962af.h
new file mode 100644
index 000000000000..0cc6ff36ed7c
--- /dev/null
+++ b/drivers/iio/accel/fxls8962af.h
@@ -0,0 +1,21 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2021 Connected Cars A/S
+ */
+#ifndef _FXLS8962AF_H_
+#define _FXLS8962AF_H_
+
+struct regmap;
+
+enum {
+	fxls8962af,
+	fxls8964af,
+};
+
+int fxls8962af_core_probe(struct device *dev, struct regmap *regmap, int irq,
+			  const char *name);
+int fxls8962af_core_remove(struct device *dev);
+extern const struct dev_pm_ops fxls8962af_pm_ops;
+extern const struct regmap_config fxls8962af_regmap_conf;
+
+#endif				/* _FXLS8962AF_H_ */