| Message ID | 20210217112122.424236-21-robert.foss@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for the SDM845 Camera Subsystem | expand |
Hi Robert, Thank you for your patch! Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org> Thanks, Andrey On 17.02.2021 14:21, Robert Foss wrote: > Add the camss dt node for sdm845. > > Signed-off-by: Robert Foss <robert.foss@linaro.org> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 135 +++++++++++++++++++++++++++ > 1 file changed, 135 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index bcf888381f14..4fe93c69908a 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -3911,6 +3911,141 @@ videocc: clock-controller@ab00000 { > #reset-cells = <1>; > }; > > + camss: camss@a00000 { > + compatible = "qcom,sdm845-camss"; > + > + reg = <0 0xacb3000 0 0x1000>, > + <0 0xacba000 0 0x1000>, > + <0 0xacc8000 0 0x1000>, > + <0 0xac65000 0 0x1000>, > + <0 0xac66000 0 0x1000>, > + <0 0xac67000 0 0x1000>, > + <0 0xac68000 0 0x1000>, > + <0 0xacaf000 0 0x4000>, > + <0 0xacb6000 0 0x4000>, > + <0 0xacc4000 0 0x4000>; > + reg-names = "csid0", > + "csid1", > + "csid2", > + "csiphy0", > + "csiphy1", > + "csiphy2", > + "csiphy3", > + "vfe0", > + "vfe1", > + "vfe_lite"; > + > + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "csid0", > + "csid1", > + "csid2", > + "csiphy0", > + "csiphy1", > + "csiphy2", > + "csiphy3", > + "vfe0", > + "vfe1", > + "vfe_lite"; > + > + power-domains = <&clock_camcc IFE_0_GDSC>, > + <&clock_camcc IFE_1_GDSC>, > + <&clock_camcc TITAN_TOP_GDSC>; > + > + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, > + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, > + <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, > + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>, > + <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>, > + <&clock_camcc CAM_CC_IFE_1_CSID_CLK>, > + <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>, > + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>, > + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>, > + <&clock_camcc CAM_CC_CSIPHY0_CLK>, > + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>, > + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>, > + <&clock_camcc CAM_CC_CSIPHY1_CLK>, > + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>, > + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>, > + <&clock_camcc CAM_CC_CSIPHY2_CLK>, > + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>, > + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>, > + <&clock_camcc CAM_CC_CSIPHY3_CLK>, > + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>, > + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>, > + <&gcc GCC_CAMERA_AHB_CLK>, > + <&gcc GCC_CAMERA_AXI_CLK>, > + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, > + <&clock_camcc CAM_CC_SOC_AHB_CLK>, > + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>, > + <&clock_camcc CAM_CC_IFE_0_CLK>, > + <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>, > + <&clock_camcc CAM_CC_IFE_0_CLK_SRC>, > + <&clock_camcc CAM_CC_IFE_1_AXI_CLK>, > + <&clock_camcc CAM_CC_IFE_1_CLK>, > + <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>, > + <&clock_camcc CAM_CC_IFE_1_CLK_SRC>, > + <&clock_camcc CAM_CC_IFE_LITE_CLK>, > + <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, > + <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>; > + clock-names = "camnoc_axi", > + "cpas_ahb", > + "cphy_rx_src", > + "csi0", > + "csi0_src", > + "csi1", > + "csi1_src", > + "csi2", > + "csi2_src", > + "csiphy0", > + "csiphy0_timer", > + "csiphy0_timer_src", > + "csiphy1", > + "csiphy1_timer", > + "csiphy1_timer_src", > + "csiphy2", > + "csiphy2_timer", > + "csiphy2_timer_src", > + "csiphy3", > + "csiphy3_timer", > + "csiphy3_timer_src", > + "gcc_camera_ahb", > + "gcc_camera_axi", > + "slow_ahb_src", > + "soc_ahb", > + "vfe0_axi", > + "vfe0", > + "vfe0_cphy_rx", > + "vfe0_src", > + "vfe1_axi", > + "vfe1", > + "vfe1_cphy_rx", > + "vfe1_src", > + "vfe_lite", > + "vfe_lite_cphy_rx", > + "vfe_lite_src"; > + > + iommus = <&apps_smmu 0x0808 0x0>, > + <&apps_smmu 0x0810 0x8>, > + <&apps_smmu 0x0c08 0x0>, > + <&apps_smmu 0x0c10 0x8>; > + > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + }; > + > cci: cci@ac4a000 { > compatible = "qcom,sdm845-cci"; > #address-cells = <1>; >
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index bcf888381f14..4fe93c69908a 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -3911,6 +3911,141 @@ videocc: clock-controller@ab00000 { #reset-cells = <1>; }; + camss: camss@a00000 { + compatible = "qcom,sdm845-camss"; + + reg = <0 0xacb3000 0 0x1000>, + <0 0xacba000 0 0x1000>, + <0 0xacc8000 0 0x1000>, + <0 0xac65000 0 0x1000>, + <0 0xac66000 0 0x1000>, + <0 0xac67000 0 0x1000>, + <0 0xac68000 0 0x1000>, + <0 0xacaf000 0 0x4000>, + <0 0xacb6000 0 0x4000>, + <0 0xacc4000 0 0x4000>; + reg-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "csid0", + "csid1", + "csid2", + "csiphy0", + "csiphy1", + "csiphy2", + "csiphy3", + "vfe0", + "vfe1", + "vfe_lite"; + + power-domains = <&clock_camcc IFE_0_GDSC>, + <&clock_camcc IFE_1_GDSC>, + <&clock_camcc TITAN_TOP_GDSC>; + + clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>, + <&clock_camcc CAM_CC_CPAS_AHB_CLK>, + <&clock_camcc CAM_CC_CPHY_RX_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_0_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_1_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CSID_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY0_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI0PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY1_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI1PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY2_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI2PHYTIMER_CLK_SRC>, + <&clock_camcc CAM_CC_CSIPHY3_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK>, + <&clock_camcc CAM_CC_CSI3PHYTIMER_CLK_SRC>, + <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMERA_AXI_CLK>, + <&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>, + <&clock_camcc CAM_CC_SOC_AHB_CLK>, + <&clock_camcc CAM_CC_IFE_0_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK>, + <&clock_camcc CAM_CC_IFE_0_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_0_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_1_AXI_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK>, + <&clock_camcc CAM_CC_IFE_1_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_1_CLK_SRC>, + <&clock_camcc CAM_CC_IFE_LITE_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>, + <&clock_camcc CAM_CC_IFE_LITE_CLK_SRC>; + clock-names = "camnoc_axi", + "cpas_ahb", + "cphy_rx_src", + "csi0", + "csi0_src", + "csi1", + "csi1_src", + "csi2", + "csi2_src", + "csiphy0", + "csiphy0_timer", + "csiphy0_timer_src", + "csiphy1", + "csiphy1_timer", + "csiphy1_timer_src", + "csiphy2", + "csiphy2_timer", + "csiphy2_timer_src", + "csiphy3", + "csiphy3_timer", + "csiphy3_timer_src", + "gcc_camera_ahb", + "gcc_camera_axi", + "slow_ahb_src", + "soc_ahb", + "vfe0_axi", + "vfe0", + "vfe0_cphy_rx", + "vfe0_src", + "vfe1_axi", + "vfe1", + "vfe1_cphy_rx", + "vfe1_src", + "vfe_lite", + "vfe_lite_cphy_rx", + "vfe_lite_src"; + + iommus = <&apps_smmu 0x0808 0x0>, + <&apps_smmu 0x0810 0x8>, + <&apps_smmu 0x0c08 0x0>, + <&apps_smmu 0x0c10 0x8>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + cci: cci@ac4a000 { compatible = "qcom,sdm845-cci"; #address-cells = <1>;
Add the camss dt node for sdm845. Signed-off-by: Robert Foss <robert.foss@linaro.org> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 135 +++++++++++++++++++++++++++ 1 file changed, 135 insertions(+) -- 2.27.0