diff mbox series

[v18,06/11] powerpc: Move ima buffer fields to struct kimage

Message ID 20210213161049.6190-7-nramas@linux.microsoft.com
State Accepted
Commit 0c605158be32104bb85cbd12fb575e6f1e17d3e7
Headers show
Series Carry forward IMA measurement log on kexec on ARM64 | expand

Commit Message

nramas Feb. 13, 2021, 4:10 p.m. UTC 
The fields ima_buffer_addr and ima_buffer_size in "struct kimage_arch"
for powerpc are used to carry forward the IMA measurement list across
kexec system call.  These fields are not architecture specific, but are
currently limited to powerpc.

arch_ima_add_kexec_buffer() defined in "arch/powerpc/kexec/ima.c"
sets ima_buffer_addr and ima_buffer_size for the kexec system call.
This function does not have architecture specific code, but is
currently limited to powerpc.

Move ima_buffer_addr and ima_buffer_size to "struct kimage".
Set ima_buffer_addr and ima_buffer_size in ima_add_kexec_buffer()
in security/integrity/ima/ima_kexec.c.

Co-developed-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
Signed-off-by: Prakhar Srivastava <prsriva@linux.microsoft.com>
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Will Deacon <will@kernel.org>
---
 arch/powerpc/include/asm/ima.h     |  3 ---
 arch/powerpc/include/asm/kexec.h   |  5 -----
 arch/powerpc/kexec/ima.c           | 29 ++++++-----------------------
 include/linux/kexec.h              |  3 +++
 security/integrity/ima/ima_kexec.c |  8 ++------
 5 files changed, 11 insertions(+), 37 deletions(-)

Comments

Thiago Jung Bauermann Feb. 15, 2021, 9:58 p.m. UTC | #1 
Lakshmi Ramasubramanian <nramas@linux.microsoft.com> writes:

> The fields ima_buffer_addr and ima_buffer_size in "struct kimage_arch"

> for powerpc are used to carry forward the IMA measurement list across

> kexec system call.  These fields are not architecture specific, but are

> currently limited to powerpc.

>

> arch_ima_add_kexec_buffer() defined in "arch/powerpc/kexec/ima.c"

> sets ima_buffer_addr and ima_buffer_size for the kexec system call.

> This function does not have architecture specific code, but is

> currently limited to powerpc.

>

> Move ima_buffer_addr and ima_buffer_size to "struct kimage".

> Set ima_buffer_addr and ima_buffer_size in ima_add_kexec_buffer()

> in security/integrity/ima/ima_kexec.c.

>

> Co-developed-by: Prakhar Srivastava <prsriva@linux.microsoft.com>

> Signed-off-by: Prakhar Srivastava <prsriva@linux.microsoft.com>

> Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>

> Suggested-by: Will Deacon <will@kernel.org>

> ---

>  arch/powerpc/include/asm/ima.h     |  3 ---

>  arch/powerpc/include/asm/kexec.h   |  5 -----

>  arch/powerpc/kexec/ima.c           | 29 ++++++-----------------------

>  include/linux/kexec.h              |  3 +++

>  security/integrity/ima/ima_kexec.c |  8 ++------

>  5 files changed, 11 insertions(+), 37 deletions(-)


Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>


-- 
Thiago Jung Bauermann
IBM Linux Technology Center
diff mbox series

Patch

diff --git a/arch/powerpc/include/asm/ima.h b/arch/powerpc/include/asm/ima.h
index ead488cf3981..51f64fd06c19 100644
--- a/arch/powerpc/include/asm/ima.h
+++ b/arch/powerpc/include/asm/ima.h
@@ -14,9 +14,6 @@  static inline void remove_ima_buffer(void *fdt, int chosen_node) {}
 #endif
 
 #ifdef CONFIG_IMA_KEXEC
-int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr,
-			      size_t size);
-
 int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node);
 #else
 static inline int setup_ima_buffer(const struct kimage *image, void *fdt,
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index f59946c6f9e6..877db8354e01 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -112,11 +112,6 @@  struct kimage_arch {
 	unsigned long elf_headers_sz;
 	void *elf_headers;
 	void *fdt;
-
-#ifdef CONFIG_IMA_KEXEC
-	phys_addr_t ima_buffer_addr;
-	size_t ima_buffer_size;
-#endif
 };
 
 char *setup_kdump_cmdline(struct kimage *image, char *cmdline,
diff --git a/arch/powerpc/kexec/ima.c b/arch/powerpc/kexec/ima.c
index 720e50e490b6..ed38125e2f87 100644
--- a/arch/powerpc/kexec/ima.c
+++ b/arch/powerpc/kexec/ima.c
@@ -128,23 +128,6 @@  void remove_ima_buffer(void *fdt, int chosen_node)
 }
 
 #ifdef CONFIG_IMA_KEXEC
-/**
- * arch_ima_add_kexec_buffer - do arch-specific steps to add the IMA buffer
- *
- * Architectures should use this function to pass on the IMA buffer
- * information to the next kernel.
- *
- * Return: 0 on success, negative errno on error.
- */
-int arch_ima_add_kexec_buffer(struct kimage *image, unsigned long load_addr,
-			      size_t size)
-{
-	image->arch.ima_buffer_addr = load_addr;
-	image->arch.ima_buffer_size = size;
-
-	return 0;
-}
-
 static int write_number(void *p, u64 value, int cells)
 {
 	if (cells == 1) {
@@ -180,7 +163,7 @@  int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
 	u8 value[16];
 
 	remove_ima_buffer(fdt, chosen_node);
-	if (!image->arch.ima_buffer_size)
+	if (!image->ima_buffer_size)
 		return 0;
 
 	ret = get_addr_size_cells(&addr_cells, &size_cells);
@@ -192,11 +175,11 @@  int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
 	if (entry_size > sizeof(value))
 		return -EINVAL;
 
-	ret = write_number(value, image->arch.ima_buffer_addr, addr_cells);
+	ret = write_number(value, image->ima_buffer_addr, addr_cells);
 	if (ret)
 		return ret;
 
-	ret = write_number(value + 4 * addr_cells, image->arch.ima_buffer_size,
+	ret = write_number(value + 4 * addr_cells, image->ima_buffer_size,
 			   size_cells);
 	if (ret)
 		return ret;
@@ -206,13 +189,13 @@  int setup_ima_buffer(const struct kimage *image, void *fdt, int chosen_node)
 	if (ret < 0)
 		return -EINVAL;
 
-	ret = fdt_add_mem_rsv(fdt, image->arch.ima_buffer_addr,
-			      image->arch.ima_buffer_size);
+	ret = fdt_add_mem_rsv(fdt, image->ima_buffer_addr,
+			      image->ima_buffer_size);
 	if (ret)
 		return -EINVAL;
 
 	pr_debug("IMA buffer at 0x%llx, size = 0x%zx\n",
-		 image->arch.ima_buffer_addr, image->arch.ima_buffer_size);
+		 image->ima_buffer_addr, image->ima_buffer_size);
 
 	return 0;
 }
diff --git a/include/linux/kexec.h b/include/linux/kexec.h
index 5f61389f5f36..75c670f0dfbb 100644
--- a/include/linux/kexec.h
+++ b/include/linux/kexec.h
@@ -304,6 +304,9 @@  struct kimage {
 #ifdef CONFIG_IMA_KEXEC
 	/* Virtual address of IMA measurement buffer for kexec syscall */
 	void *ima_buffer;
+
+	phys_addr_t ima_buffer_addr;
+	size_t ima_buffer_size;
 #endif
 };
 
diff --git a/security/integrity/ima/ima_kexec.c b/security/integrity/ima/ima_kexec.c
index e29bea3dd4cc..8b1a3d50c49c 100644
--- a/security/integrity/ima/ima_kexec.c
+++ b/security/integrity/ima/ima_kexec.c
@@ -123,12 +123,8 @@  void ima_add_kexec_buffer(struct kimage *image)
 		return;
 	}
 
-	ret = arch_ima_add_kexec_buffer(image, kbuf.mem, kexec_segment_size);
-	if (ret) {
-		pr_err("Error passing over kexec measurement buffer.\n");
-		return;
-	}
-
+	image->ima_buffer_addr = kbuf.mem;
+	image->ima_buffer_size = kexec_segment_size;
 	image->ima_buffer = kexec_buffer;
 
 	pr_debug("kexec measurement buffer for the loaded kernel at 0x%lx.\n",