diff mbox series

[net-next,v2,1/2] dt-bindings: net: dsa: add MT7530 GPIO controller binding

Message ID 20210125044322.6280-2-dqfext@gmail.com
State Accepted
Commit 974d5ba60df74483c69a2ccf580308de68769ec7
Headers show
Series dsa: add MT7530 GPIO support | expand

Commit Message

Qingfang Deng Jan. 25, 2021, 4:43 a.m. UTC
Add device tree binding to support MT7530 GPIO controller.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
Changes v1 -> v2:
	No changes.

 Documentation/devicetree/bindings/net/dsa/mt7530.txt | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Andrew Lunn Jan. 25, 2021, 1:23 p.m. UTC | #1
On Mon, Jan 25, 2021 at 12:43:21PM +0800, DENG Qingfang wrote:
> Add device tree binding to support MT7530 GPIO controller.
> 
> Signed-off-by: DENG Qingfang <dqfext@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
Rob Herring (Arm) Jan. 25, 2021, 3:52 p.m. UTC | #2
On Mon, 25 Jan 2021 12:43:21 +0800, DENG Qingfang wrote:
> Add device tree binding to support MT7530 GPIO controller.
> 
> Signed-off-by: DENG Qingfang <dqfext@gmail.com>
> ---
> Changes v1 -> v2:
> 	No changes.
> 
>  Documentation/devicetree/bindings/net/dsa/mt7530.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 


Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.

If a tag was not added on purpose, please state why and what changed.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
index 560369efad6c..de04626a8e9d 100644
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -76,6 +76,12 @@  phy-mode must be set, see also example 2 below!
  * mt7621: phy-mode = "rgmii-txid";
  * mt7623: phy-mode = "rgmii";
 
+Optional properties:
+
+- gpio-controller: Boolean; if defined, MT7530's LED controller will run on
+	GPIO mode.
+- #gpio-cells: Must be 2 if gpio-controller is defined.
+
 See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required, optional properties and how the integrated switch subnodes must
 be specified.