diff mbox series

[1/7] regulator: qcom-labibb: Implement voltage selector ops

Message ID 20210109132921.140932-2-angelogioacchino.delregno@somainline.org
State Superseded
Headers show
Series Really implement Qualcomm LAB/IBB regulators | expand

Commit Message

AngeloGioacchino Del Regno Jan. 9, 2021, 1:29 p.m. UTC
Implement {get,set}_voltage_sel, list_voltage, map_voltage with
the useful regulator regmap helpers in order to be able to manage
the voltage of LAB (positive) and IBB (negative) regulators.

In particular, the supported ranges are the following:
- LAB (pos):  4600mV to  6100mV with 100mV stepping,
- IBB (neg): -7700mV to -1400mV with 100mV stepping.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 drivers/regulator/qcom-labibb-regulator.c | 28 +++++++++++++++++++++++
 1 file changed, 28 insertions(+)

Comments

Mark Brown Jan. 11, 2021, 1:16 p.m. UTC | #1
On Sat, Jan 09, 2021 at 02:29:15PM +0100, AngeloGioacchino Del Regno wrote:

> +	.linear_ranges		= (struct linear_range[]) {

> +		REGULATOR_LINEAR_RANGE(4600000, 0, 15, 100000),

> +	},

> +	.n_linear_ranges	= 1,


If there's a single range that's just a simple linear mapping and should
use regulator_map_voltage_linear().
diff mbox series

Patch

diff --git a/drivers/regulator/qcom-labibb-regulator.c b/drivers/regulator/qcom-labibb-regulator.c
index 8ccf572394a2..9f51c96f16fb 100644
--- a/drivers/regulator/qcom-labibb-regulator.c
+++ b/drivers/regulator/qcom-labibb-regulator.c
@@ -19,6 +19,12 @@ 
 #define PMI8998_IBB_REG_BASE		0xdc00
 
 #define REG_LABIBB_STATUS1		0x08
+
+#define REG_LABIBB_VOLTAGE		0x41
+ #define LABIBB_VOLTAGE_OVERRIDE_EN	BIT(7)
+ #define LAB_VOLTAGE_SET_MASK		GENMASK(3, 0)
+ #define IBB_VOLTAGE_SET_MASK		GENMASK(5, 0)
+
 #define REG_LABIBB_ENABLE_CTL		0x46
 #define LABIBB_STATUS1_VREG_OK_BIT	BIT(7)
 #define LABIBB_CONTROL_ENABLE		BIT(7)
@@ -51,6 +57,10 @@  static const struct regulator_ops qcom_labibb_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear_range,
+	.map_voltage		= regulator_map_voltage_linear_range,
 };
 
 static const struct regulator_desc pmi8998_lab_desc = {
@@ -59,9 +69,18 @@  static const struct regulator_desc pmi8998_lab_desc = {
 	.enable_val		= LABIBB_CONTROL_ENABLE,
 	.enable_time		= LAB_ENABLE_TIME,
 	.poll_enabled_time	= LABIBB_POLL_ENABLED_TIME,
+	.vsel_reg		= (PMI8998_LAB_REG_BASE + REG_LABIBB_VOLTAGE),
+	.vsel_mask		= LAB_VOLTAGE_SET_MASK,
+	.apply_reg		= (PMI8998_LAB_REG_BASE + REG_LABIBB_VOLTAGE),
+	.apply_bit		= LABIBB_VOLTAGE_OVERRIDE_EN,
 	.off_on_delay		= LABIBB_OFF_ON_DELAY,
 	.owner			= THIS_MODULE,
 	.type			= REGULATOR_VOLTAGE,
+	.linear_ranges		= (struct linear_range[]) {
+		REGULATOR_LINEAR_RANGE(4600000, 0, 15, 100000),
+	},
+	.n_linear_ranges	= 1,
+	.n_voltages		= 16,
 	.ops			= &qcom_labibb_ops,
 };
 
@@ -71,9 +90,18 @@  static const struct regulator_desc pmi8998_ibb_desc = {
 	.enable_val		= LABIBB_CONTROL_ENABLE,
 	.enable_time		= IBB_ENABLE_TIME,
 	.poll_enabled_time	= LABIBB_POLL_ENABLED_TIME,
+	.vsel_reg		= (PMI8998_IBB_REG_BASE + REG_LABIBB_VOLTAGE),
+	.vsel_mask		= IBB_VOLTAGE_SET_MASK,
+	.apply_reg		= (PMI8998_IBB_REG_BASE + REG_LABIBB_VOLTAGE),
+	.apply_bit		= LABIBB_VOLTAGE_OVERRIDE_EN,
 	.off_on_delay		= LABIBB_OFF_ON_DELAY,
 	.owner			= THIS_MODULE,
 	.type			= REGULATOR_VOLTAGE,
+	.linear_ranges		= (struct linear_range[]) {
+		REGULATOR_LINEAR_RANGE(1400000, 0, 63, 100000),
+	},
+	.n_linear_ranges	= 1,
+	.n_voltages		= 64,
 	.ops			= &qcom_labibb_ops,
 };