| Message ID | 20210108120429.895046-17-robert.foss@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for SDM845 Camera Subsystem | expand |
Hi Rob, Thank you for the patch. The subject line doesn't match the patch. On Fri, Jan 08, 2021 at 01:04:28PM +0100, Robert Foss wrote: > Add regulators and camss DT node. > > Signed-off-by: Robert Foss <robert.foss@linaro.org> > --- > arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts > index a943b3f353ce..7bad0515345e 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts > +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts > @@ -294,6 +294,9 @@ vreg_s7a_1p025: smps7 { > regulator-max-microvolt = <1028000>; > }; > > + vdda_mipi_csi0_0p9: > + vdda_mipi_csi1_0p9: > + vdda_mipi_csi2_0p9: No need for new labels, you can simply use vreg_l1a_0p875 below. > vreg_l1a_0p875: ldo1 { > regulator-min-microvolt = <880000>; > regulator-max-microvolt = <880000>; > @@ -1106,6 +1109,15 @@ &cci { > status = "okay"; > }; > > +&camss { > + vdda-csi0-supply = <&vdda_mipi_csi0_0p9>; > + vdda-csi1-supply = <&vdda_mipi_csi1_0p9>; > + vdda-csi2-supply = <&vdda_mipi_csi2_0p9>; > + > + status = "disabled"; This isn't needed. > + Extra blank line. > +}; > + > &cci_i2c0 { > camera@10 { > compatible = "ovti,ov8856";
Thanks Laurent! On Sat, 9 Jan 2021 at 02:47, Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > > Hi Rob, > > Thank you for the patch. > > The subject line doesn't match the patch. > > On Fri, Jan 08, 2021 at 01:04:28PM +0100, Robert Foss wrote: > > Add regulators and camss DT node. > > > > Signed-off-by: Robert Foss <robert.foss@linaro.org> > > --- > > arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 12 ++++++++++++ > > 1 file changed, 12 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts > > index a943b3f353ce..7bad0515345e 100644 > > --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts > > +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts > > @@ -294,6 +294,9 @@ vreg_s7a_1p025: smps7 { > > regulator-max-microvolt = <1028000>; > > }; > > > > + vdda_mipi_csi0_0p9: > > + vdda_mipi_csi1_0p9: > > + vdda_mipi_csi2_0p9: > > No need for new labels, you can simply use vreg_l1a_0p875 below. Ack > > > vreg_l1a_0p875: ldo1 { > > regulator-min-microvolt = <880000>; > > regulator-max-microvolt = <880000>; > > @@ -1106,6 +1109,15 @@ &cci { > > status = "okay"; > > }; > > > > +&camss { > > + vdda-csi0-supply = <&vdda_mipi_csi0_0p9>; > > + vdda-csi1-supply = <&vdda_mipi_csi1_0p9>; > > + vdda-csi2-supply = <&vdda_mipi_csi2_0p9>; > > + > > + status = "disabled"; > > This isn't needed. Ack > > > + > > Extra blank line. Ack > > > +}; > > + > > &cci_i2c0 { > > camera@10 { > > compatible = "ovti,ov8856"; > > -- > Regards, > > Laurent Pinchart
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index a943b3f353ce..7bad0515345e 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -294,6 +294,9 @@ vreg_s7a_1p025: smps7 { regulator-max-microvolt = <1028000>; }; + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: vreg_l1a_0p875: ldo1 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; @@ -1106,6 +1109,15 @@ &cci { status = "okay"; }; +&camss { + vdda-csi0-supply = <&vdda_mipi_csi0_0p9>; + vdda-csi1-supply = <&vdda_mipi_csi1_0p9>; + vdda-csi2-supply = <&vdda_mipi_csi2_0p9>; + + status = "disabled"; + +}; + &cci_i2c0 { camera@10 { compatible = "ovti,ov8856";
Add regulators and camss DT node. Signed-off-by: Robert Foss <robert.foss@linaro.org> --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+)