diff mbox series

[v11,1/7] dt-bindings: soc: mediatek: add mtk svs dt-bindings

Message ID 20210107024356.583-2-roger.lu@mediatek.com
State New
Headers show
Series soc: mediatek: SVS: introduce MTK SVS | expand

Commit Message

Roger Lu Jan. 7, 2021, 2:43 a.m. UTC
Document the binding for enabling mtk svs on MediaTek SoC.

Signed-off-by: Roger Lu <roger.lu@mediatek.com>
---
 .../bindings/soc/mediatek/mtk-svs.yaml        | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml

Comments

Rob Herring (Arm) Jan. 12, 2021, 2:47 p.m. UTC | #1
On Thu, Jan 07, 2021 at 10:43:50AM +0800, Roger Lu wrote:
> Document the binding for enabling mtk svs on MediaTek SoC.

> 

> Signed-off-by: Roger Lu <roger.lu@mediatek.com>

> ---

>  .../bindings/soc/mediatek/mtk-svs.yaml        | 80 +++++++++++++++++++

>  1 file changed, 80 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml

> 

> diff --git a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml

> new file mode 100644

> index 000000000000..bb8c345a0c0a

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml

> @@ -0,0 +1,80 @@

> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

> +%YAML 1.2

> +---

> +$id: http://devicetree.org/schemas/soc/mediatek/mtk-svs.yaml#

> +$schema: http://devicetree.org/meta-schemas/core.yaml#

> +

> +title: Introduce MTK SVS engine


Introduce? That's what this commit does, not what this binding is.

> +

> +maintainers:

> +  - Matthias Brugger <matthias.bgg@gmail.com>

> +  - Kevin Hilman <khilman@kernel.org>

> +  - Nishanth Menon <nm@ti.com>


This should be someone that knows the h/w. Not who applies patches. 
Perhaps you.

> +

> +description: |+

> +  The Smart Voltage Scaling(SVS) engine is a piece of hardware

> +  which has several controllers(banks) for calculating suitable

> +  voltage to different power domains(CPU/GPU/CCI) according to

> +  chip process corner, temperatures and other factors. Then DVFS

> +  driver could apply SVS bank voltage to PMIC/Buck.

> +

> +properties:

> +  compatible:

> +    enum:

> +      - mediatek,mt8183-svs

> +

> +  reg:

> +    description: Address range of the MTK SVS controller.

> +    maxItems: 1

> +

> +  interrupts:

> +    description: IRQ for the MTK SVS controller.


Drop. That's kind of obvious with only 1 interrupt.

> +    maxItems: 1

> +

> +  clocks:

> +    description: Main clock for MTK SVS controller to work.


How many clocks (maxItems)?

> +

> +  clock-names:

> +    const: main

> +

> +  nvmem-cells:

> +    maxItems: 2

> +    description:

> +      Phandle to the calibration data provided by a nvmem device.


Need to define what each entry is.

items:
  - description: ...
  - description: ...

> +

> +  nvmem-cell-names:

> +    items:

> +      - const: svs-calibration-data

> +      - const: t-calibration-data

> +

> +required:

> +  - compatible

> +  - reg

> +  - interrupts

> +  - clocks

> +  - clock-names

> +  - nvmem-cells

> +  - nvmem-cell-names

> +

> +additionalProperties: false

> +

> +examples:

> +  - |

> +    #include <dt-bindings/clock/mt8183-clk.h>

> +    #include <dt-bindings/interrupt-controller/arm-gic.h>

> +    #include <dt-bindings/interrupt-controller/irq.h>

> +

> +    soc {

> +        #address-cells = <2>;

> +        #size-cells = <2>;

> +

> +        svs@1100b000 {

> +            compatible = "mediatek,mt8183-svs";

> +            reg = <0 0x1100b000 0 0x1000>;

> +            interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;

> +            clocks = <&infracfg CLK_INFRA_THERM>;

> +            clock-names = "main";

> +            nvmem-cells = <&svs_calibration>, <&thermal_calibration>;

> +            nvmem-cell-names = "svs-calibration-data", "t-calibration-data";

> +        };

> +    };

> -- 

> 2.18.0

>
Nishanth Menon Jan. 15, 2021, 1:46 p.m. UTC | #2
On 08:47-20210112, Rob Herring wrote:
> > +

> > +maintainers:

> > +  - Matthias Brugger <matthias.bgg@gmail.com>

> > +  - Kevin Hilman <khilman@kernel.org>

> > +  - Nishanth Menon <nm@ti.com>

> 

> This should be someone that knows the h/w. Not who applies patches. 

> Perhaps you.


Yes please, I would have no idea what to do with SVS patches. Thanks Rob
for catching it.

-- 
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3  1A34 DDB5 849D 1736 249D
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
new file mode 100644
index 000000000000..bb8c345a0c0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/mediatek/mtk-svs.yaml
@@ -0,0 +1,80 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mtk-svs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Introduce MTK SVS engine
+
+maintainers:
+  - Matthias Brugger <matthias.bgg@gmail.com>
+  - Kevin Hilman <khilman@kernel.org>
+  - Nishanth Menon <nm@ti.com>
+
+description: |+
+  The Smart Voltage Scaling(SVS) engine is a piece of hardware
+  which has several controllers(banks) for calculating suitable
+  voltage to different power domains(CPU/GPU/CCI) according to
+  chip process corner, temperatures and other factors. Then DVFS
+  driver could apply SVS bank voltage to PMIC/Buck.
+
+properties:
+  compatible:
+    enum:
+      - mediatek,mt8183-svs
+
+  reg:
+    description: Address range of the MTK SVS controller.
+    maxItems: 1
+
+  interrupts:
+    description: IRQ for the MTK SVS controller.
+    maxItems: 1
+
+  clocks:
+    description: Main clock for MTK SVS controller to work.
+
+  clock-names:
+    const: main
+
+  nvmem-cells:
+    maxItems: 2
+    description:
+      Phandle to the calibration data provided by a nvmem device.
+
+  nvmem-cell-names:
+    items:
+      - const: svs-calibration-data
+      - const: t-calibration-data
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/mt8183-clk.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        svs@1100b000 {
+            compatible = "mediatek,mt8183-svs";
+            reg = <0 0x1100b000 0 0x1000>;
+            interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_LOW>;
+            clocks = <&infracfg CLK_INFRA_THERM>;
+            clock-names = "main";
+            nvmem-cells = <&svs_calibration>, <&thermal_calibration>;
+            nvmem-cell-names = "svs-calibration-data", "t-calibration-data";
+        };
+    };