@@ -1311,6 +1311,14 @@ config RTC_DRV_CROS_EC
This driver can also be built as a module. If so, the module
will be called rtc-cros-ec.
+config RTC_DRV_NTXEC
+ tristate "Netronix embedded controller RTC"
+ depends on MFD_NTXEC
+ help
+ Say yes here if you want to support the RTC functionality of the
+ embedded controller found in certain e-book readers designed by the
+ original design manufacturer Netronix.
+
comment "on-CPU RTC drivers"
config RTC_DRV_ASM9260
@@ -111,6 +111,7 @@ obj-$(CONFIG_RTC_DRV_MT7622) += rtc-mt7622.o
obj-$(CONFIG_RTC_DRV_MV) += rtc-mv.o
obj-$(CONFIG_RTC_DRV_MXC) += rtc-mxc.o
obj-$(CONFIG_RTC_DRV_MXC_V2) += rtc-mxc_v2.o
+obj-$(CONFIG_RTC_DRV_NTXEC) += rtc-ntxec.o
obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o
obj-$(CONFIG_RTC_DRV_OPAL) += rtc-opal.o
obj-$(CONFIG_RTC_DRV_PALMAS) += rtc-palmas.o
new file mode 100644
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * The Netronix embedded controller is a microcontroller found in some
+ * e-book readers designed by the original design manufacturer Netronix, Inc.
+ * It contains RTC, battery monitoring, system power management, and PWM
+ * functionality.
+ *
+ * This driver implements access to the RTC time and date.
+ *
+ * Copyright 2020 Jonathan Neuschäfer <j.neuschaefer@gmx.net>
+ */
+
+#include <linux/mfd/ntxec.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/rtc.h>
+#include <linux/types.h>
+
+struct ntxec_rtc {
+ struct device *dev;
+ struct ntxec *ec;
+};
+
+#define NTXEC_REG_WRITE_YEAR 0x10
+#define NTXEC_REG_WRITE_MONTH 0x11
+#define NTXEC_REG_WRITE_DAY 0x12
+#define NTXEC_REG_WRITE_HOUR 0x13
+#define NTXEC_REG_WRITE_MINUTE 0x14
+#define NTXEC_REG_WRITE_SECOND 0x15
+
+#define NTXEC_REG_READ_YEAR_MONTH 0x20
+#define NTXEC_REG_READ_MDAY_HOUR 0x21
+#define NTXEC_REG_READ_MINUTE_SECOND 0x23
+
+static int ntxec_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct ntxec_rtc *rtc = dev_get_drvdata(dev);
+ unsigned int value;
+ int res;
+
+retry:
+ res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MINUTE_SECOND, &value);
+ if (res < 0)
+ return res;
+
+ tm->tm_min = value >> 8;
+ tm->tm_sec = value & 0xff;
+
+ res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MDAY_HOUR, &value);
+ if (res < 0)
+ return res;
+
+ tm->tm_mday = value >> 8;
+ tm->tm_hour = value & 0xff;
+
+ res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_YEAR_MONTH, &value);
+ if (res < 0)
+ return res;
+
+ tm->tm_year = (value >> 8) + 100;
+ tm->tm_mon = (value & 0xff) - 1;
+
+ /*
+ * Read the minutes/seconds field again. If it changed since the first
+ * read, we can't assume that the values read so far are consistent,
+ * and should start from the beginning.
+ */
+ res = regmap_read(rtc->ec->regmap, NTXEC_REG_READ_MINUTE_SECOND, &value);
+ if (res < 0)
+ return res;
+
+ if (tm->tm_min != value >> 8 || tm->tm_sec != (value & 0xff))
+ goto retry;
+
+ return 0;
+}
+
+static int ntxec_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct ntxec_rtc *rtc = dev_get_drvdata(dev);
+
+ /*
+ * To avoid time overflows while we're writing the full date/time,
+ * set the seconds field to zero before doing anything else. For the
+ * next 59 seconds (plus however long it takes until the RTC's next
+ * update of the second field), the seconds field will not overflow
+ * into the other fields.
+ */
+ struct reg_sequence regs[] = {
+ { NTXEC_REG_WRITE_SECOND, ntxec_reg8(0) },
+ { NTXEC_REG_WRITE_YEAR, ntxec_reg8(tm->tm_year - 100) },
+ { NTXEC_REG_WRITE_MONTH, ntxec_reg8(tm->tm_mon + 1) },
+ { NTXEC_REG_WRITE_DAY, ntxec_reg8(tm->tm_mday) },
+ { NTXEC_REG_WRITE_HOUR, ntxec_reg8(tm->tm_hour) },
+ { NTXEC_REG_WRITE_MINUTE, ntxec_reg8(tm->tm_min) },
+ { NTXEC_REG_WRITE_SECOND, ntxec_reg8(tm->tm_sec) },
+ };
+
+ return regmap_multi_reg_write(rtc->ec->regmap, regs, ARRAY_SIZE(regs));
+}
+
+static const struct rtc_class_ops ntxec_rtc_ops = {
+ .read_time = ntxec_read_time,
+ .set_time = ntxec_set_time,
+};
+
+static int ntxec_rtc_probe(struct platform_device *pdev)
+{
+ struct rtc_device *dev;
+ struct ntxec_rtc *rtc;
+
+ rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL);
+ if (!rtc)
+ return -ENOMEM;
+
+ rtc->dev = &pdev->dev;
+ rtc->ec = dev_get_drvdata(pdev->dev.parent);
+ platform_set_drvdata(pdev, rtc);
+
+ dev = devm_rtc_allocate_device(&pdev->dev);
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
+
+ dev->ops = &ntxec_rtc_ops;
+ dev->range_min = RTC_TIMESTAMP_BEGIN_2000;
+ dev->range_max = 9025257599LL; /* 2255-12-31 23:59:59 */
+
+ return rtc_register_device(dev);
+}
+
+static struct platform_driver ntxec_rtc_driver = {
+ .driver = {
+ .name = "ntxec-rtc",
+ },
+ .probe = ntxec_rtc_probe,
+};
+module_platform_driver(ntxec_rtc_driver);
+
+MODULE_AUTHOR("Jonathan Neuschäfer <j.neuschaefer@gmx.net>");
+MODULE_DESCRIPTION("RTC driver for Netronix EC");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ntxec-rtc");