From patchwork Wed Jun 10 07:47:08 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Manivannan Sadhasivam X-Patchwork-Id: 187738 Delivered-To: patch@linaro.org Received: by 2002:a92:cf06:0:0:0:0:0 with SMTP id c6csp255441ilo; Wed, 10 Jun 2020 00:47:47 -0700 (PDT) X-Google-Smtp-Source: ABdhPJwiH/R72yUDjlHhy1aC8MaEkr7hRcNNecMR2kMdRL98ix7ni/fyPJJNKgKAiTKaeRGYZNoE X-Received: by 2002:a17:907:2162:: with SMTP id rl2mr2019263ejb.365.1591775266742; Wed, 10 Jun 2020 00:47:46 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1591775266; cv=none; d=google.com; s=arc-20160816; b=OvAmbugK61yNiHK8V1Hqc/BsXVi3jDdob6CB2IJaAfkiIn44Zz1QbAlybS+mtLP6q+ nXXNEuM+Ia2WXSVS8N7a1mfqz0i1N9hyrJ6f1YdNRxO3T1M+1Z/tjzGU20ELhqP69kew KmLkJz0XwjIokM/CY7lkbi1QVErn3XVH2GwBrV2nylxCQfNV9w1hi1D2cVRXIdMCrlKt 9P0WPmd8iSxCYNWOljS5w83CWXsCo3WwqWln7Ns/LwNVoSDcyzXwa3N1fRLJZFP2qWEH D7Wn/JkvCb6PfET+NdecTnOq178/vryjz2O/lFO0AX0lSMyUgQcD4k0SKua+8oonliLA Yj0w== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:sender:references:in-reply-to:message-id:date :subject:cc:to:from:dkim-signature; bh=KPH+/JEy/C0E3Wvv3TmYr7qJX6IchbSuJkgneJXNq0k=; b=ZlbUPt/Y8bJE7b+EtOd6mDbIPh2v3JzoX9W8FkpbWPHx0wtR/tT1Y+7mK8uzfvlb6r a3SgUI2z5NzzGSOTMJ6vniNQ294qn04IIRVFCyAOiJrkN1tK20I6zbfwOFXpRMHvAr86 MRae8YU0FdV/a8YV5l9NjAOYSKpvNZbc/QUV4hXKJEhvTS/ZLbmL0IolC6kOal8ewdyK 6EMvp8ryHpW7peE8gpIT/nwKqFBzDDVIDkSP9LNt4Pa6tgG0LkgxpZG8s46CiSZUWseK BDIXe2cC97MseI0i0FV0GoLzTNzuHASIcck2g70cAn7c0rRKTNOcNXPAwTvmeXwF9Zaq M6qw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=mfBoKqzd; spf=pass (google.com: domain of devicetree-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=devicetree-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id 6si12909463edp.594.2020.06.10.00.47.45; Wed, 10 Jun 2020 00:47:46 -0700 (PDT) Received-SPF: pass (google.com: domain of devicetree-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=mfBoKqzd; spf=pass (google.com: domain of devicetree-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=devicetree-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726719AbgFJHro (ORCPT + 6 others); Wed, 10 Jun 2020 03:47:44 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:57752 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726698AbgFJHrm (ORCPT ); Wed, 10 Jun 2020 03:47:42 -0400 Received: from mail-pg1-x544.google.com (mail-pg1-x544.google.com [IPv6:2607:f8b0:4864:20::544]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 83B40C03E96F for ; Wed, 10 Jun 2020 00:47:42 -0700 (PDT) Received: by mail-pg1-x544.google.com with SMTP id 185so612350pgb.10 for ; Wed, 10 Jun 2020 00:47:42 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=KPH+/JEy/C0E3Wvv3TmYr7qJX6IchbSuJkgneJXNq0k=; b=mfBoKqzdsAZbANTQpF0VLNXZfxIZ95SDC+E6ApR6/qfxbwnzXXLkVbphoapmnuUHTO KKbNAF3vtnRFCHx6ZlyvyaPe5fiN8IMYXW5l/Yb155gdMW67wQdxSQqIeTgzxhdx7UwM VxE4D6WYiw62LGjhUmjy0MEwDD8RgtbA7QSUVWb76nmvk/sCfYgtuJbYVqKUsKH45hfh l6QPdmjEXAljOcPpcXKxbTGAyegMSBmXjkHZ/iLHbHOB/HO3I81EYIHHAVKBSd9mRWap 4zCl0hVDJrsUpxW0gK98g3z56bA52//WAoOCEiAYCqLjVlGZmkqOnXSm678M5sIMr302 Zaaw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=KPH+/JEy/C0E3Wvv3TmYr7qJX6IchbSuJkgneJXNq0k=; b=jc56OTNiIrOmd69ThNcsrST7P3rcWrEMbLz+GV9AOHTCwbojp2S63l/29FGRh4gBtT Q8VBj1n/iRhjoJJxToLyozuoQXvvA8ntJkku1eTzrSNHbYKDLMhIvQlWLcGXFHfyqSRt 1pS1FTj/fSx3doGYRaTpWy5kP9LD5hACXYQfZWMPgFbdDLTi/ulyBsokZOvTIj48uTij uDd0JieS/NcgKMgKL65kvgkSHLSkkGOtoxRiPD8Q4qQlbPKDqjIenG50BGthXGqJvw1V 04aYp8w58mI/4k5EhJeHiTE3LmQEnCGEINRPlatEah2d9a6Gh4VColB0omfk4odUNGlw mEPA== X-Gm-Message-State: AOAM5301+0yPzfcgvJe8oKBybNJ1gzu9ZyWQrZyUMTCrzFN5qZKqkFUf mvNmhSW0lAArYLRR10zUrNLL X-Received: by 2002:a63:fb04:: with SMTP id o4mr1686195pgh.386.1591775261497; Wed, 10 Jun 2020 00:47:41 -0700 (PDT) Received: from Mani-XPS-13-9360.localdomain ([2409:4072:630f:1dba:c41:a14e:6586:388a]) by smtp.gmail.com with ESMTPSA id u1sm10075040pgf.28.2020.06.10.00.47.35 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 10 Jun 2020 00:47:40 -0700 (PDT) From: Manivannan Sadhasivam To: wg@grandegger.com, mkl@pengutronix.de, robh+dt@kernel.org Cc: kernel@martin.sperl.org, linux-can@vger.kernel.org, netdev@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Manivannan Sadhasivam Subject: [RESEND PATCH 3/6] can: mcp25xxfd: Add support for CAN reception Date: Wed, 10 Jun 2020 13:17:08 +0530 Message-Id: <20200610074711.10969-4-manivannan.sadhasivam@linaro.org> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200610074711.10969-1-manivannan.sadhasivam@linaro.org> References: <20200610074711.10969-1-manivannan.sadhasivam@linaro.org> Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Martin Sperl Add un-optimized CAN2.0 and CAN-FD reception support. On a Rasperry pi 3 it is already able to process CAN2.0 Frames with DLC=0 on a CAN bus with 1MHz without losing any packets on the SPI side. Packets still get lost inside the network stack. Signed-off-by: Martin Sperl [mani: misc cleanups for upstream] Signed-off-by: Manivannan Sadhasivam --- drivers/net/can/spi/mcp25xxfd/Makefile | 3 + .../net/can/spi/mcp25xxfd/mcp25xxfd_base.c | 6 + drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.c | 395 ++++++++++- drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.h | 35 + .../can/spi/mcp25xxfd/mcp25xxfd_can_fifo.c | 228 ++++++ .../can/spi/mcp25xxfd/mcp25xxfd_can_fifo.h | 16 + .../net/can/spi/mcp25xxfd/mcp25xxfd_can_id.h | 69 ++ .../net/can/spi/mcp25xxfd/mcp25xxfd_can_int.c | 655 ++++++++++++++++++ .../net/can/spi/mcp25xxfd/mcp25xxfd_can_int.h | 18 + .../can/spi/mcp25xxfd/mcp25xxfd_can_priv.h | 131 ++++ .../net/can/spi/mcp25xxfd/mcp25xxfd_can_rx.c | 233 +++++++ .../net/can/spi/mcp25xxfd/mcp25xxfd_can_rx.h | 18 + drivers/net/can/spi/mcp25xxfd/mcp25xxfd_int.c | 14 +- .../net/can/spi/mcp25xxfd/mcp25xxfd_priv.h | 2 + .../net/can/spi/mcp25xxfd/mcp25xxfd_regs.h | 5 + 15 files changed, 1823 insertions(+), 5 deletions(-) create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_fifo.c create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_fifo.h create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_id.h create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_int.c create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_int.h create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_priv.h create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_rx.c create mode 100644 drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_rx.h -- 2.17.1 diff --git a/drivers/net/can/spi/mcp25xxfd/Makefile b/drivers/net/can/spi/mcp25xxfd/Makefile index d8fdb76a9578..5787bdd57a9d 100644 --- a/drivers/net/can/spi/mcp25xxfd/Makefile +++ b/drivers/net/can/spi/mcp25xxfd/Makefile @@ -1,6 +1,9 @@ obj-$(CONFIG_CAN_MCP25XXFD) += mcp25xxfd.o mcp25xxfd-objs := mcp25xxfd_base.o mcp25xxfd-objs += mcp25xxfd_can.o +mcp25xxfd-objs += mcp25xxfd_can_fifo.o +mcp25xxfd-objs += mcp25xxfd_can_int.o +mcp25xxfd-objs += mcp25xxfd_can_rx.o mcp25xxfd-objs += mcp25xxfd_cmd.o mcp25xxfd-objs += mcp25xxfd_crc.o mcp25xxfd-objs += mcp25xxfd_ecc.o diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_base.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_base.c index 4be456df0998..c6b67c54a3cd 100644 --- a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_base.c +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_base.c @@ -123,6 +123,11 @@ static int mcp25xxfd_base_probe(struct spi_device *spi) if (ret) goto out_power; + /* setting up CAN */ + ret = mcp25xxfd_can_setup(priv); + if (ret) + goto out_power; + dev_info(&spi->dev, "MCP%04x successfully initialized.\n", model); return 0; @@ -140,6 +145,7 @@ static int mcp25xxfd_base_remove(struct spi_device *spi) { struct mcp25xxfd_priv *priv = spi_get_drvdata(spi); + mcp25xxfd_can_remove(priv); mcp25xxfd_base_power_enable(priv->power, 0); clk_disable_unprepare(priv->clk); diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.c index 41a5ab508582..2ac78024c171 100644 --- a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.c +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.c @@ -5,15 +5,119 @@ * Copyright 2019 Martin Sperl */ +#include +#include +#include #include +#include #include +#include +#include +#include #include +#include "mcp25xxfd_base.h" +#include "mcp25xxfd_can_fifo.h" +#include "mcp25xxfd_can_int.h" +#include "mcp25xxfd_can_priv.h" #include "mcp25xxfd_can.h" #include "mcp25xxfd_cmd.h" +#include "mcp25xxfd_int.h" #include "mcp25xxfd_priv.h" #include "mcp25xxfd_regs.h" +#include + +/* everything related to bit timing */ +static +const struct can_bittiming_const mcp25xxfd_can_nominal_bittiming_const = { + .name = DEVICE_NAME, + .tseg1_min = 2, + .tseg1_max = BIT(MCP25XXFD_CAN_NBTCFG_TSEG1_BITS), + .tseg2_min = 1, + .tseg2_max = BIT(MCP25XXFD_CAN_NBTCFG_TSEG2_BITS), + .sjw_max = BIT(MCP25XXFD_CAN_NBTCFG_SJW_BITS), + .brp_min = 1, + .brp_max = BIT(MCP25XXFD_CAN_NBTCFG_BRP_BITS), + .brp_inc = 1, +}; + +static +const struct can_bittiming_const mcp25xxfd_can_data_bittiming_const = { + .name = DEVICE_NAME, + .tseg1_min = 1, + .tseg1_max = BIT(MCP25XXFD_CAN_DBTCFG_TSEG1_BITS), + .tseg2_min = 1, + .tseg2_max = BIT(MCP25XXFD_CAN_DBTCFG_TSEG2_BITS), + .sjw_max = BIT(MCP25XXFD_CAN_DBTCFG_SJW_BITS), + .brp_min = 1, + .brp_max = BIT(MCP25XXFD_CAN_DBTCFG_BRP_BITS), + .brp_inc = 1, +}; + +static int mcp25xxfd_can_do_set_nominal_bittiming(struct net_device *net) +{ + struct mcp25xxfd_can_priv *cpriv = netdev_priv(net); + struct can_bittiming *bt = &cpriv->can.bittiming; + int sjw = bt->sjw; + int pseg2 = bt->phase_seg2; + int pseg1 = bt->phase_seg1; + int propseg = bt->prop_seg; + int brp = bt->brp; + int tseg1 = propseg + pseg1; + int tseg2 = pseg2; + + /* calculate nominal bit timing */ + cpriv->regs.nbtcfg = ((sjw - 1) << MCP25XXFD_CAN_NBTCFG_SJW_SHIFT) | + ((tseg2 - 1) << MCP25XXFD_CAN_NBTCFG_TSEG2_SHIFT) | + ((tseg1 - 1) << MCP25XXFD_CAN_NBTCFG_TSEG1_SHIFT) | + ((brp - 1) << MCP25XXFD_CAN_NBTCFG_BRP_SHIFT); + + return mcp25xxfd_cmd_write(cpriv->priv->spi, MCP25XXFD_CAN_NBTCFG, + cpriv->regs.nbtcfg); +} + +static int mcp25xxfd_can_do_set_data_bittiming(struct net_device *net) +{ + struct mcp25xxfd_can_priv *cpriv = netdev_priv(net); + struct mcp25xxfd_priv *priv = cpriv->priv; + struct can_bittiming *bt = &cpriv->can.data_bittiming; + struct spi_device *spi = priv->spi; + int sjw = bt->sjw; + int pseg2 = bt->phase_seg2; + int pseg1 = bt->phase_seg1; + int propseg = bt->prop_seg; + int brp = bt->brp; + int tseg1 = propseg + pseg1; + int tseg2 = pseg2; + int tdco; + int ret; + + /* set up Transmitter delay compensation */ + cpriv->regs.tdc = FIELD_PREP(MCP25XXFD_CAN_TDC_TDCMOD_MASK, + MCP25XXFD_CAN_TDC_TDCMOD_AUTO); + + /* configure TDC offsets */ + tdco = clamp_t(int, bt->brp * tseg1, -64, 63); + cpriv->regs.tdc &= ~MCP25XXFD_CAN_TDC_TDCO_MASK; + cpriv->regs.tdc |= FIELD_PREP(MCP25XXFD_CAN_TDC_TDCO_MASK, tdco); + + /* set TDC */ + ret = mcp25xxfd_cmd_write(spi, MCP25XXFD_CAN_TDC, cpriv->regs.tdc); + if (ret) + return ret; + + /* calculate data bit timing */ + cpriv->regs.dbtcfg = + FIELD_PREP(MCP25XXFD_CAN_DBTCFG_SJW_MASK, (sjw - 1)) | + FIELD_PREP(MCP25XXFD_CAN_DBTCFG_TSEG2_MASK, (tseg2 - 1)) | + FIELD_PREP(MCP25XXFD_CAN_DBTCFG_TSEG1_MASK, (tseg1 - 1)) | + FIELD_PREP(MCP25XXFD_CAN_DBTCFG_BRP_MASK, (brp - 1)); + + return mcp25xxfd_cmd_write(spi, MCP25XXFD_CAN_DBTCFG, + cpriv->regs.dbtcfg); +} + int mcp25xxfd_can_get_mode(struct mcp25xxfd_priv *priv, u32 *reg) { int ret; @@ -25,10 +129,10 @@ int mcp25xxfd_can_get_mode(struct mcp25xxfd_priv *priv, u32 *reg) return FIELD_GET(MCP25XXFD_CAN_CON_OPMOD_MASK, *reg); } -static int mcp25xxfd_can_switch_mode(struct mcp25xxfd_priv *priv, - u32 *reg, int mode) +int mcp25xxfd_can_switch_mode_no_wait(struct mcp25xxfd_priv *priv, + u32 *reg, int mode) { - int ret, i; + int ret; ret = mcp25xxfd_can_get_mode(priv, reg); if (ret < 0) @@ -41,7 +145,15 @@ static int mcp25xxfd_can_switch_mode(struct mcp25xxfd_priv *priv, FIELD_PREP(MCP25XXFD_CAN_CON_OPMOD_MASK, mode); /* Request the mode switch */ - ret = mcp25xxfd_cmd_write(priv->spi, MCP25XXFD_CAN_CON, *reg); + return mcp25xxfd_cmd_write(priv->spi, MCP25XXFD_CAN_CON, *reg); +} + +int mcp25xxfd_can_switch_mode(struct mcp25xxfd_priv *priv, u32 *reg, int mode) +{ + int ret, i; + + /* trigger the mode switch itself */ + ret = mcp25xxfd_can_switch_mode_no_wait(priv, reg, mode); if (ret) return ret; @@ -139,3 +251,278 @@ int mcp25xxfd_can_probe(struct mcp25xxfd_priv *priv) /* Finally check if modeswitch is really working */ return mcp25xxfd_can_probe_modeswitch(priv); } + +static int mcp25xxfd_can_config(struct net_device *net) +{ + struct mcp25xxfd_can_priv *cpriv = netdev_priv(net); + struct mcp25xxfd_priv *priv = cpriv->priv; + struct spi_device *spi = priv->spi; + int ret; + + /* setup value of con_register */ + cpriv->regs.con = MCP25XXFD_CAN_CON_STEF; /* enable TEF, disable TXQ */ + + /* non iso FD mode */ + if (!(cpriv->can.ctrlmode & CAN_CTRLMODE_FD_NON_ISO)) + cpriv->regs.con |= MCP25XXFD_CAN_CON_ISOCRCEN; + + /* one shot */ + if (cpriv->can.ctrlmode & CAN_CTRLMODE_ONE_SHOT) + cpriv->regs.con |= MCP25XXFD_CAN_CON_RTXAT; + + /* apply it now together with a mode switch */ + ret = mcp25xxfd_can_switch_mode(cpriv->priv, &cpriv->regs.con, + MCP25XXFD_CAN_CON_MODE_CONFIG); + if (ret) + return 0; + + /* time stamp control register - 1ns resolution */ + cpriv->regs.tscon = 0; + ret = mcp25xxfd_cmd_write(spi, MCP25XXFD_CAN_TBC, 0); + if (ret) + return ret; + + cpriv->regs.tscon = MCP25XXFD_CAN_TSCON_TBCEN | + FIELD_PREP(MCP25XXFD_CAN_TSCON_TBCPRE_MASK, + ((cpriv->can.clock.freq / 1000000))); + ret = mcp25xxfd_cmd_write(spi, MCP25XXFD_CAN_TSCON, cpriv->regs.tscon); + if (ret) + return ret; + + /* setup fifos */ + ret = mcp25xxfd_can_fifo_setup(cpriv); + if (ret) + return ret; + + /* setup can bittiming now - the do_set_bittiming methods + * are not used as they get called before open + */ + ret = mcp25xxfd_can_do_set_nominal_bittiming(net); + if (ret) + return ret; + + ret = mcp25xxfd_can_do_set_data_bittiming(net); + if (ret) + return ret; + + return ret; +} + +/* mode setting */ +static int mcp25xxfd_can_do_set_mode(struct net_device *net, + enum can_mode mode) +{ + switch (mode) { + case CAN_MODE_START: + break; + default: + return -EOPNOTSUPP; + } + + return 0; +} + +/* binary error counters */ +static int mcp25xxfd_can_get_berr_counter(const struct net_device *net, + struct can_berr_counter *bec) +{ + struct mcp25xxfd_can_priv *cpriv = netdev_priv(net); + + bec->txerr = FIELD_PREP(MCP25XXFD_CAN_TREC_TEC_MASK, + cpriv->status.trec); + bec->rxerr = FIELD_PREP(MCP25XXFD_CAN_TREC_REC_MASK, + cpriv->status.trec); + + return 0; +} + +static int mcp25xxfd_can_open(struct net_device *net) +{ + struct mcp25xxfd_can_priv *cpriv = netdev_priv(net); + struct spi_device *spi = cpriv->priv->spi; + int ret, mode; + + ret = open_candev(net); + if (ret) { + netdev_err(net, "unable to set initial baudrate!\n"); + return ret; + } + + /* request an IRQ but keep disabled for now */ + ret = request_threaded_irq(spi->irq, NULL, + mcp25xxfd_can_int, + IRQF_ONESHOT | IRQF_TRIGGER_LOW, + cpriv->priv->device_name, cpriv); + if (ret) { + dev_err(&spi->dev, "failed to acquire irq %d - %i\n", + spi->irq, ret); + goto out_candev; + } + + disable_irq(spi->irq); + cpriv->irq.allocated = true; + cpriv->irq.enabled = false; + + /* enable power to the transceiver */ + ret = mcp25xxfd_base_power_enable(cpriv->transceiver, 1); + if (ret) + goto out_irq; + + /* configure controller for reception */ + ret = mcp25xxfd_can_config(net); + if (ret) + goto out_power; + + /* setting up state */ + cpriv->can.state = CAN_STATE_ERROR_ACTIVE; + + /* enable interrupts */ + ret = mcp25xxfd_int_enable(cpriv->priv, true); + if (ret) + goto out_canconfig; + + if (cpriv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) + mode = MCP25XXFD_CAN_CON_MODE_EXT_LOOPBACK; + else if (cpriv->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) + mode = MCP25XXFD_CAN_CON_MODE_LISTENONLY; + else if (cpriv->can.ctrlmode & CAN_CTRLMODE_FD) + mode = MCP25XXFD_CAN_CON_MODE_MIXED; + else + mode = MCP25XXFD_CAN_CON_MODE_CAN2_0; + + /* switch to active mode */ + ret = mcp25xxfd_can_switch_mode(cpriv->priv, &cpriv->regs.con, mode); + if (ret) + goto out_int; + + return 0; + +out_int: + mcp25xxfd_int_enable(cpriv->priv, false); +out_canconfig: + mcp25xxfd_can_fifo_release(cpriv); +out_power: + mcp25xxfd_base_power_enable(cpriv->transceiver, 0); +out_irq: + free_irq(spi->irq, cpriv); + cpriv->irq.allocated = false; + cpriv->irq.enabled = false; +out_candev: + close_candev(net); + return ret; +} + +static void mcp25xxfd_can_shutdown(struct mcp25xxfd_can_priv *cpriv) +{ + /* switch us to CONFIG mode - this disables the controller */ + mcp25xxfd_can_switch_mode(cpriv->priv, &cpriv->regs.con, + MCP25XXFD_CAN_CON_MODE_CONFIG); +} + +static int mcp25xxfd_can_stop(struct net_device *net) +{ + struct mcp25xxfd_can_priv *cpriv = netdev_priv(net); + struct mcp25xxfd_priv *priv = cpriv->priv; + struct spi_device *spi = priv->spi; + + /* shutdown the can controller */ + mcp25xxfd_can_shutdown(cpriv); + + /* disable inerrupts on controller */ + mcp25xxfd_int_enable(cpriv->priv, false); + + /* disable the transceiver */ + mcp25xxfd_base_power_enable(cpriv->transceiver, 0); + + /* disable interrupt on host */ + free_irq(spi->irq, cpriv); + cpriv->irq.allocated = false; + cpriv->irq.enabled = false; + + /* close the can_decice */ + close_candev(net); + + return 0; +} + +static const struct net_device_ops mcp25xxfd_netdev_ops = { + .ndo_open = mcp25xxfd_can_open, + .ndo_stop = mcp25xxfd_can_stop, + .ndo_change_mtu = can_change_mtu, +}; + +/* probe and remove */ +int mcp25xxfd_can_setup(struct mcp25xxfd_priv *priv) +{ + struct spi_device *spi = priv->spi; + struct mcp25xxfd_can_priv *cpriv; + struct net_device *net; + struct regulator *transceiver; + int ret; + + /* get transceiver power regulator*/ + transceiver = devm_regulator_get(&spi->dev, "xceiver"); + if (PTR_ERR(transceiver) == -EPROBE_DEFER) + return PTR_ERR(transceiver); + + /* allocate can device */ + net = alloc_candev(sizeof(*cpriv), TX_ECHO_SKB_MAX); + if (!net) + return -ENOMEM; + + cpriv = netdev_priv(net); + cpriv->priv = priv; + priv->cpriv = cpriv; + + /* setup network */ + SET_NETDEV_DEV(net, &spi->dev); + net->netdev_ops = &mcp25xxfd_netdev_ops; + net->flags |= IFF_ECHO; + + cpriv->transceiver = transceiver; + + cpriv->can.clock.freq = priv->clock_freq; + cpriv->can.bittiming_const = + &mcp25xxfd_can_nominal_bittiming_const; + cpriv->can.data_bittiming_const = + &mcp25xxfd_can_data_bittiming_const; + + /* we are not setting bit-timing methods here as they get called by + * the framework before open. So the controller would be still in sleep + * mode, which does not help as things are configured in open instead. + */ + cpriv->can.do_set_mode = + mcp25xxfd_can_do_set_mode; + cpriv->can.do_get_berr_counter = + mcp25xxfd_can_get_berr_counter; + cpriv->can.ctrlmode_supported = + CAN_CTRLMODE_FD | + CAN_CTRLMODE_FD_NON_ISO | + CAN_CTRLMODE_LOOPBACK | + CAN_CTRLMODE_LISTENONLY | + CAN_CTRLMODE_BERR_REPORTING | + CAN_CTRLMODE_ONE_SHOT; + + ret = register_candev(net); + if (ret) { + dev_err(&spi->dev, "Failed to register can device\n"); + goto out; + } + + return 0; + +out: + free_candev(net); + priv->cpriv = NULL; + + return ret; +} + +void mcp25xxfd_can_remove(struct mcp25xxfd_priv *priv) +{ + if (priv->cpriv) { + unregister_candev(priv->cpriv->can.dev); + free_candev(priv->cpriv->can.dev); + priv->cpriv = NULL; + } +} diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.h index f54c716735fb..4b18b5bb3d45 100644 --- a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.h +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can.h @@ -8,9 +8,44 @@ #ifndef __MCP25XXFD_CAN_H #define __MCP25XXFD_CAN_H +#include "mcp25xxfd_can_priv.h" #include "mcp25xxfd_priv.h" +#include "mcp25xxfd_regs.h" + +/* get the optimal controller target mode */ +static inline +int mcp25xxfd_can_targetmode(struct mcp25xxfd_can_priv *cpriv) +{ + return (cpriv->can.dev->mtu == CAN_MTU) ? + MCP25XXFD_CAN_CON_MODE_CAN2_0 : MCP25XXFD_CAN_CON_MODE_MIXED; +} + +static inline +void mcp25xxfd_can_queue_frame(struct mcp25xxfd_can_priv *cpriv, + s32 fifo, u16 ts) +{ + int idx = cpriv->fifos.submit_queue_count; + + cpriv->fifos.submit_queue[idx].fifo = fifo; + cpriv->fifos.submit_queue[idx].ts = ts; + + cpriv->fifos.submit_queue_count++; +} + +/* get the current controller mode */ +int mcp25xxfd_can_get_mode(struct mcp25xxfd_priv *priv, u32 *reg); + +/* switch controller mode */ +int mcp25xxfd_can_switch_mode_no_wait(struct mcp25xxfd_priv *priv, + u32 *reg, int mode); +int mcp25xxfd_can_switch_mode(struct mcp25xxfd_priv *priv, + u32 *reg, int mode); /* probe the can controller */ int mcp25xxfd_can_probe(struct mcp25xxfd_priv *priv); +/* setup and the can controller net interface */ +int mcp25xxfd_can_setup(struct mcp25xxfd_priv *priv); +void mcp25xxfd_can_remove(struct mcp25xxfd_priv *priv); + #endif /* __MCP25XXFD_CAN_H */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_fifo.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_fifo.c new file mode 100644 index 000000000000..4bd776772d2d --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_fifo.c @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl + */ + +/* here we define and configure the fifo layout */ + +#include +#include +#include + +#include "mcp25xxfd_can.h" +#include "mcp25xxfd_can_fifo.h" +#include "mcp25xxfd_can_priv.h" +#include "mcp25xxfd_cmd.h" + +static int mcp25xxfd_can_fifo_get_address(struct mcp25xxfd_can_priv *cpriv) +{ + int fifo, ret; + + /* we need to move out of config mode to force address computation */ + ret = mcp25xxfd_can_switch_mode(cpriv->priv, &cpriv->regs.con, + MCP25XXFD_CAN_CON_MODE_INT_LOOPBACK); + if (ret) + return ret; + + /* and get back into config mode */ + ret = mcp25xxfd_can_switch_mode(cpriv->priv, &cpriv->regs.con, + MCP25XXFD_CAN_CON_MODE_CONFIG); + if (ret) + return ret; + + /* read address and config back in */ + for (fifo = 1; fifo < 32; fifo++) { + ret = mcp25xxfd_cmd_read(cpriv->priv->spi, + MCP25XXFD_CAN_FIFOUA(fifo), + &cpriv->fifos.info[fifo].offset); + if (ret) + return ret; + } + + return 0; +} + +static int mcp25xxfd_can_fifo_setup_config(struct mcp25xxfd_can_priv *cpriv, + struct mcp25xxfd_fifo *desc, + u32 flags, u32 flags_last) +{ + u32 val; + int i, p, f, c, ret; + + for (i = 0, f = desc->start, c = desc->count, p = 31; + c > 0; i++, f++, p--, c--) { + val = (c > 1) ? flags : flags_last; + + /* write the config to the controller in one go */ + ret = mcp25xxfd_cmd_write(cpriv->priv->spi, + MCP25XXFD_CAN_FIFOCON(f), val); + if (ret) + return ret; + } + + return 0; +} + +static int mcp25xxfd_can_fifo_setup_rx(struct mcp25xxfd_can_priv *cpriv) +{ + u32 rx_flags = MCP25XXFD_CAN_FIFOCON_FRESET | /* reset FIFO */ + MCP25XXFD_CAN_FIFOCON_RXTSEN | /* RX timestamps */ + MCP25XXFD_CAN_FIFOCON_TFERFFIE | /* FIFO Full */ + MCP25XXFD_CAN_FIFOCON_TFHRFHIE | /* FIFO Half Full*/ + MCP25XXFD_CAN_FIFOCON_TFNRFNIE | /* FIFO not empty */ + (cpriv->fifos.payload_mode << + MCP25XXFD_CAN_FIFOCON_PLSIZE_SHIFT) | + (0 << MCP25XXFD_CAN_FIFOCON_FSIZE_SHIFT); /* 1 FIFO deep */ + /* enable overflow int on last fifo */ + u32 rx_flags_last = rx_flags | MCP25XXFD_CAN_FIFOCON_RXOVIE; + + return mcp25xxfd_can_fifo_setup_config(cpriv, &cpriv->fifos.rx, + rx_flags, rx_flags_last); +} + +static int mcp25xxfd_can_fifo_setup_rxfilter(struct mcp25xxfd_can_priv *cpriv) +{ + u8 filter_con[32]; + int c, f; + + /* clear the filters and filter mappings for all filters */ + memset(filter_con, 0, sizeof(filter_con)); + + /* and now set up the rx filters */ + for (c = 0, f = cpriv->fifos.rx.start; c < cpriv->fifos.rx.count; + c++, f++) { + /* set up filter config - we can use the mask of filter 0 */ + filter_con[c] = MCP25XXFD_CAN_FIFOCON_FLTEN(0) | + (f << MCP25XXFD_CAN_FILCON_SHIFT(0)); + } + + /* and set up filter control */ + return mcp25xxfd_cmd_write_regs(cpriv->priv->spi, + MCP25XXFD_CAN_FLTCON(0), + (u32 *)filter_con, sizeof(filter_con)); +} + +static int mcp25xxfd_can_fifo_compute(struct mcp25xxfd_can_priv *cpriv) +{ + int rx_memory_available; + + switch (cpriv->can.dev->mtu) { + case CAN_MTU: + /* MTU is 8 */ + cpriv->fifos.payload_size = 8; + cpriv->fifos.payload_mode = MCP25XXFD_CAN_TXQCON_PLSIZE_8; + + break; + case CANFD_MTU: + /* MTU is 64 */ + cpriv->fifos.payload_size = 64; + cpriv->fifos.payload_mode = MCP25XXFD_CAN_TXQCON_PLSIZE_64; + + break; + default: + return -EINVAL; + } + + /* compute effective sizes */ + cpriv->fifos.rx.size = sizeof(struct mcp25xxfd_can_obj_rx) + + cpriv->fifos.payload_size; + + /* calculate evailable memory for RX_fifos */ + rx_memory_available = MCP25XXFD_SRAM_SIZE; + + /* calculate possible amount of RX fifos */ + cpriv->fifos.rx.count = rx_memory_available / cpriv->fifos.rx.size; + + /* now calculate effective number of rx-fifos. There are only 31 fifos + * available in total, so we need to limit ourselves + */ + if (cpriv->fifos.rx.count > 31) + cpriv->fifos.rx.count = 31; + + cpriv->fifos.rx.start = 1; + + return 0; +} + +static int mcp25xxfd_can_fifo_clear_regs(struct mcp25xxfd_can_priv *cpriv, + u32 start, u32 end) +{ + size_t len = end - start; + u8 *data; + int ret; + + data = kzalloc(len, GFP_KERNEL); + if (!data) + return -ENOMEM; + + ret = mcp25xxfd_cmd_write_regs(cpriv->priv->spi, + start, (u32 *)data, len); + + kfree(data); + + return ret; +} + +static int mcp25xxfd_can_fifo_clear(struct mcp25xxfd_can_priv *cpriv) +{ + int ret; + + memset(&cpriv->fifos.info, 0, sizeof(cpriv->fifos.info)); + memset(&cpriv->fifos.rx, 0, sizeof(cpriv->fifos.rx)); + + /* clear FIFO config */ + ret = mcp25xxfd_can_fifo_clear_regs(cpriv, MCP25XXFD_CAN_FIFOCON(1), + MCP25XXFD_CAN_FIFOCON(32)); + if (ret) + return ret; + + /* clear the filter mask - match any frame with every filter */ + return mcp25xxfd_can_fifo_clear_regs(cpriv, MCP25XXFD_CAN_FLTCON(0), + MCP25XXFD_CAN_FLTCON(32)); +} + +int mcp25xxfd_can_fifo_setup(struct mcp25xxfd_can_priv *cpriv) +{ + int ret; + + /* clear fifo config */ + ret = mcp25xxfd_can_fifo_clear(cpriv); + if (ret) + return ret; + + ret = mcp25xxfd_can_fifo_compute(cpriv); + if (ret) + return ret; + + cpriv->regs.tefcon = 0; + ret = mcp25xxfd_cmd_write(cpriv->priv->spi, MCP25XXFD_CAN_TEFCON, + cpriv->regs.tefcon); + if (ret) + return ret; + + ret = mcp25xxfd_cmd_write(cpriv->priv->spi, MCP25XXFD_CAN_TXQCON, 0); + if (ret) + return ret; + + ret = mcp25xxfd_can_fifo_setup_rx(cpriv); + if (ret) + return ret; + + ret = mcp25xxfd_can_fifo_setup_rxfilter(cpriv); + if (ret) + return ret; + + /* get fifo addresses */ + ret = mcp25xxfd_can_fifo_get_address(cpriv); + if (ret) + return ret; + + return 0; +} + +void mcp25xxfd_can_fifo_release(struct mcp25xxfd_can_priv *cpriv) +{ + mcp25xxfd_can_fifo_clear(cpriv); +} diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_fifo.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_fifo.h new file mode 100644 index 000000000000..ed2daa05220a --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_fifo.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl + */ + +#ifndef __MCP25XXFD_CAN_FIFO_H +#define __MCP25XXFD_CAN_FIFO_H + +#include "mcp25xxfd_can_priv.h" + +int mcp25xxfd_can_fifo_setup(struct mcp25xxfd_can_priv *cpriv); +void mcp25xxfd_can_fifo_release(struct mcp25xxfd_can_priv *cpriv); + +#endif /* __MCP25XXFD_CAN_FIFO_H */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_id.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_id.h new file mode 100644 index 000000000000..00a6c6639bd5 --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_id.h @@ -0,0 +1,69 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl + */ + +#ifndef __MCP25XXFD_CAN_IF_H +#define __MCP25XXFD_CAN_IF_H + +#include + +#include "mcp25xxfd_can_id.h" +#include "mcp25xxfd_regs.h" + +/* ideally these would be defined in uapi/linux/can.h */ +#define MCP25XXFD_CAN_EFF_SID_SHIFT (CAN_EFF_ID_BITS - CAN_SFF_ID_BITS) +#define MCP25XXFD_CAN_EFF_SID_BITS CAN_SFF_ID_BITS +#define MCP25XXFD_CAN_EFF_SID_MASK \ + GENMASK(MCP25XXFD_CAN_EFF_SID_SHIFT + MCP25XXFD_CAN_EFF_SID_BITS - 1, \ + MCP25XXFD_CAN_EFF_SID_SHIFT) +#define MCP25XXFD_CAN_EFF_EID_SHIFT 0 +#define MCP25XXFD_CAN_EFF_EID_BITS MCP25XXFD_CAN_EFF_SID_SHIFT +#define MCP25XXFD_CAN_EFF_EID_MASK \ + GENMASK(MCP25XXFD_CAN_EFF_EID_SHIFT + MCP25XXFD_CAN_EFF_EID_BITS - 1, \ + MCP25XXFD_CAN_EFF_EID_SHIFT) + +static inline +void mcp25xxfd_can_id_from_mcp25xxfd(u32 mcp_id, u32 mcp_flags, u32 *can_id) +{ + u32 sid = (mcp_id & MCP25XXFD_CAN_OBJ_ID_SID_MASK) >> + MCP25XXFD_CAN_OBJ_ID_SID_SHIFT; + u32 eid = (mcp_id & MCP25XXFD_CAN_OBJ_ID_EID_MASK) >> + MCP25XXFD_CAN_OBJ_ID_EID_SHIFT; + + /* select normal or extended ids */ + if (mcp_flags & MCP25XXFD_CAN_OBJ_FLAGS_IDE) { + *can_id = (eid << MCP25XXFD_CAN_EFF_EID_SHIFT) | + (sid << MCP25XXFD_CAN_EFF_SID_SHIFT) | + CAN_EFF_FLAG; + } else { + *can_id = sid << MCP25XXFD_CAN_EFF_EID_SHIFT; + } + /* handle rtr */ + *can_id |= (mcp_flags & MCP25XXFD_CAN_OBJ_FLAGS_RTR) ? CAN_RTR_FLAG : 0; +} + +static inline +void mcp25xxfd_can_id_to_mcp25xxfd(u32 can_id, u32 *id, u32 *flags) +{ + /* depending on can_id flag compute extended or standard ids */ + if (can_id & CAN_EFF_FLAG) { + int sid = (can_id & MCP25XXFD_CAN_EFF_SID_MASK) >> + MCP25XXFD_CAN_EFF_SID_SHIFT; + int eid = (can_id & MCP25XXFD_CAN_EFF_EID_MASK) >> + MCP25XXFD_CAN_EFF_EID_SHIFT; + *id = (eid << MCP25XXFD_CAN_OBJ_ID_EID_SHIFT) | + (sid << MCP25XXFD_CAN_OBJ_ID_SID_SHIFT); + *flags = MCP25XXFD_CAN_OBJ_FLAGS_IDE; + } else { + *id = can_id & CAN_SFF_MASK; + *flags = 0; + } + + /* Handle RTR */ + *flags |= (can_id & CAN_RTR_FLAG) ? MCP25XXFD_CAN_OBJ_FLAGS_RTR : 0; +} + +#endif /* __MCP25XXFD_CAN_IF_H */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_int.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_int.c new file mode 100644 index 000000000000..83656b2604df --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_int.c @@ -0,0 +1,655 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mcp25xxfd_regs.h" +#include "mcp25xxfd_can.h" +#include "mcp25xxfd_can_int.h" +#include "mcp25xxfd_can_priv.h" +#include "mcp25xxfd_can_rx.h" +#include "mcp25xxfd_cmd.h" +#include "mcp25xxfd_ecc.h" + +#define MCP25XXFD_RESCHEDULE_TIMES 4 + +static void mcp25xxfd_can_int_send_error_skb(struct mcp25xxfd_can_priv *cpriv) +{ + struct net_device *net = cpriv->can.dev; + struct sk_buff *skb; + struct can_frame *frame; + + /* allocate error frame */ + skb = alloc_can_err_skb(net, &frame); + if (!skb) { + netdev_err(net, "cannot allocate error skb\n"); + return; + } + + /* setup can error frame data */ + frame->can_id |= cpriv->error_frame.id; + memcpy(frame->data, cpriv->error_frame.data, sizeof(frame->data)); + + /* and submit it */ + netif_receive_skb(skb); +} + +static int mcp25xxfd_can_int_compare_obj_ts(const void *a, const void *b) +{ + s32 ats = ((struct mcp25xxfd_obj_ts *)a)->ts; + s32 bts = ((struct mcp25xxfd_obj_ts *)b)->ts; + + if (ats < bts) + return -1; + if (ats > bts) + return 1; + + return 0; +} + +static int mcp25xxfd_can_int_submit_frames(struct mcp25xxfd_can_priv *cpriv) +{ + struct mcp25xxfd_obj_ts *queue = cpriv->fifos.submit_queue; + int count = cpriv->fifos.submit_queue_count; + int i, fifo; + int ret; + + /* skip processing if the queue count is 0 */ + if (count == 0) + goto out; + + /* sort the fifos (rx and tx - actually TEF) by receive timestamp */ + sort(queue, count, sizeof(*queue), + mcp25xxfd_can_int_compare_obj_ts, NULL); + + /* now submit the fifos */ + for (i = 0; i < count; i++) { + fifo = queue[i].fifo; + ret = mcp25xxfd_can_rx_submit_frame(cpriv, fifo); + if (ret) + return ret; + } + + /* if we have received or transmitted something and the IVMIE is + * disabled, then enable it. This is mostly to avoid unnecessary + * interrupts when CAN bus is disconnected. + */ + if (!(cpriv->status.intf | MCP25XXFD_CAN_INT_IVMIE)) { + cpriv->status.intf |= MCP25XXFD_CAN_INT_IVMIE; + ret = mcp25xxfd_cmd_write_mask(cpriv->priv->spi, + MCP25XXFD_CAN_INT, + cpriv->status.intf, + MCP25XXFD_CAN_INT_IVMIE); + if (ret) + return ret; + } + +out: + return 0; +} + +static int mcp25xxfd_can_int_clear_int_flags(struct mcp25xxfd_can_priv *cpriv) +{ + u32 clearable_irq_active = cpriv->status.intf & + MCP25XXFD_CAN_INT_IF_CLEAR_MASK; + u32 clear_irq = cpriv->status.intf & (~MCP25XXFD_CAN_INT_IF_CLEAR_MASK); + + if (!clearable_irq_active) + return 0; + + return mcp25xxfd_cmd_write_mask(cpriv->priv->spi, MCP25XXFD_CAN_INT, + clear_irq, clearable_irq_active); +} + +static +int mcp25xxfd_can_int_handle_serrif_txmab(struct mcp25xxfd_can_priv *cpriv) +{ + int mode = mcp25xxfd_can_targetmode(cpriv); + + cpriv->can.dev->stats.tx_fifo_errors++; + cpriv->can.dev->stats.tx_errors++; + + /* data7 contains custom mcp25xxfd error flags */ + cpriv->error_frame.data[7] |= MCP25XXFD_CAN_ERR_DATA7_MCP25XXFD_SERR_TX; + + /* and switch back into the correct mode */ + return mcp25xxfd_can_switch_mode_no_wait(cpriv->priv, + &cpriv->regs.con, mode); +} + +static +int mcp25xxfd_can_int_handle_serrif_rxmab(struct mcp25xxfd_can_priv *cpriv) +{ + cpriv->can.dev->stats.rx_dropped++; + cpriv->can.dev->stats.rx_errors++; + + /* data7 contains custom mcp25xxfd error flags */ + cpriv->error_frame.data[7] |= MCP25XXFD_CAN_ERR_DATA7_MCP25XXFD_SERR_RX; + + return 0; +} + +static int mcp25xxfd_can_int_handle_serrif(struct mcp25xxfd_can_priv *cpriv) +{ + if (!(cpriv->status.intf & MCP25XXFD_CAN_INT_SERRIF)) + return 0; + + /* Errors here are: + * * Bus Bandwidth Error: when a RX Message Assembly Buffer + * is still full when the next message has already arrived + * the recived message shall be ignored + * * TX MAB Underflow: when a TX Message is invalid + * due to ECC errors or TXMAB underflow + * in this situatioon the system will transition to + * Restricted or Listen Only mode + */ + + cpriv->error_frame.id |= CAN_ERR_CRTL; + cpriv->error_frame.data[1] |= CAN_ERR_CRTL_UNSPEC; + + /* mode change + invalid message would indicate TX MAB Underflow */ + if ((cpriv->status.intf & MCP25XXFD_CAN_INT_MODIF) && + (cpriv->status.intf & MCP25XXFD_CAN_INT_IVMIF)) { + return mcp25xxfd_can_int_handle_serrif_txmab(cpriv); + } + + /* for RX there is only the RXIF an indicator - surprizingly RX-MAB + * does not change mode or anything + */ + if (cpriv->status.intf & MCP25XXFD_CAN_INT_RXIF) + return mcp25xxfd_can_int_handle_serrif_rxmab(cpriv); + + dev_warn_ratelimited(&cpriv->priv->spi->dev, + "unidentified system interrupt - intf = %08x\n", + cpriv->status.intf); + + return 0; +} + +static int mcp25xxfd_can_int_handle_modif(struct mcp25xxfd_can_priv *cpriv) +{ + struct spi_device *spi = cpriv->priv->spi; + int mode; + int ret; + + /* Note that this irq does not get triggered in all situations + * for example SERRIF will move to RESTICTED or LISTENONLY but MODIF + * will not be raised! + */ + if (!(cpriv->status.intf & MCP25XXFD_CAN_INT_MODIF)) + return 0; + + /* get the current mode */ + ret = mcp25xxfd_can_get_mode(cpriv->priv, &mode); + if (ret) + return ret; + + mode = ret; + + /* switches to the same mode as before are ignored + * - this typically happens if the driver is shortly + * switching to a different mode and then returning to the + * original mode + */ + if (mode == cpriv->mode) + return 0; + + /* if we are restricted, then return to "normal" mode */ + if (mode == MCP25XXFD_CAN_CON_MODE_RESTRICTED) { + cpriv->mode = mode; + mode = mcp25xxfd_can_targetmode(cpriv); + return mcp25xxfd_can_switch_mode_no_wait(cpriv->priv, + &cpriv->regs.con, + mode); + } + + /* the controller itself will transition to sleep, so we ignore it */ + if (mode == MCP25XXFD_CAN_CON_MODE_SLEEP) { + cpriv->mode = mode; + return 0; + } + + dev_warn(&spi->dev, + "Controller unexpectedly switched from mode %u to %u\n", + cpriv->mode, mode); + + /* assign the mode as current */ + cpriv->mode = mode; + + return 0; +} + +static int mcp25xxfd_can_int_handle_eccif(struct mcp25xxfd_can_priv *cpriv) +{ + if (!(cpriv->status.intf & MCP25XXFD_CAN_INT_ECCIF)) + return 0; + + /* and prepare ERROR FRAME */ + cpriv->error_frame.id |= CAN_ERR_CRTL; + cpriv->error_frame.data[1] |= CAN_ERR_CRTL_UNSPEC; + /* data7 contains custom mcp25xxfd error flags */ + cpriv->error_frame.data[7] |= MCP25XXFD_CAN_ERR_DATA7_MCP25XXFD_ECC; + + /* delegate to interrupt cleaning */ + return mcp25xxfd_ecc_clear_int(cpriv->priv); +} + +static void mcp25xxfd_can_int_handle_ivmif_tx(struct mcp25xxfd_can_priv *cpriv, + u32 *mask) +{ + /* check if it is really a known tx error */ + if ((cpriv->bus.bdiag[1] & + (MCP25XXFD_CAN_BDIAG1_DBIT1ERR | + MCP25XXFD_CAN_BDIAG1_DBIT0ERR | + MCP25XXFD_CAN_BDIAG1_NACKERR | + MCP25XXFD_CAN_BDIAG1_NBIT1ERR | + MCP25XXFD_CAN_BDIAG1_NBIT0ERR + )) == 0) + return; + + /* mark it as a protocol error */ + cpriv->error_frame.id |= CAN_ERR_PROT; + + /* and update statistics */ + cpriv->can.dev->stats.tx_errors++; + + /* and handle all the known cases */ + if (cpriv->bus.bdiag[1] & MCP25XXFD_CAN_BDIAG1_NACKERR) { + /* TX-Frame not acknowledged - connected to CAN-bus? */ + *mask |= MCP25XXFD_CAN_BDIAG1_NACKERR; + cpriv->error_frame.data[2] |= CAN_ERR_PROT_TX; + cpriv->can.dev->stats.tx_aborted_errors++; + } + + if (cpriv->bus.bdiag[1] & MCP25XXFD_CAN_BDIAG1_NBIT1ERR) { + /* TX-Frame CAN-BUS Level is unexpectedly dominant */ + *mask |= MCP25XXFD_CAN_BDIAG1_NBIT1ERR; + cpriv->can.dev->stats.tx_carrier_errors++; + cpriv->error_frame.data[2] |= CAN_ERR_PROT_BIT1; + } + + if (cpriv->bus.bdiag[1] & MCP25XXFD_CAN_BDIAG1_NBIT0ERR) { + /* TX-Frame CAN-BUS Level is unexpectedly recessive */ + *mask |= MCP25XXFD_CAN_BDIAG1_NBIT0ERR; + cpriv->can.dev->stats.tx_carrier_errors++; + cpriv->error_frame.data[2] |= CAN_ERR_PROT_BIT0; + } + + if (cpriv->bus.bdiag[1] & MCP25XXFD_CAN_BDIAG1_DBIT1ERR) { + /* TX-Frame CAN-BUS Level is unexpectedly dominant + * during data phase + */ + *mask |= MCP25XXFD_CAN_BDIAG1_DBIT1ERR; + cpriv->can.dev->stats.tx_carrier_errors++; + cpriv->error_frame.data[2] |= CAN_ERR_PROT_BIT1; + } + + if (cpriv->bus.bdiag[1] & MCP25XXFD_CAN_BDIAG1_DBIT0ERR) { + /* TX-Frame CAN-BUS Level is unexpectedly recessive + * during data phase + */ + *mask |= MCP25XXFD_CAN_BDIAG1_DBIT0ERR; + cpriv->can.dev->stats.tx_carrier_errors++; + cpriv->error_frame.data[2] |= CAN_ERR_PROT_BIT0; + } +} + +static void mcp25xxfd_can_int_handle_ivmif_rx(struct mcp25xxfd_can_priv *cpriv, + u32 *mask) +{ + /* check if it is really a known tx error */ + if ((cpriv->bus.bdiag[1] & + (MCP25XXFD_CAN_BDIAG1_DCRCERR | + MCP25XXFD_CAN_BDIAG1_DSTUFERR | + MCP25XXFD_CAN_BDIAG1_DFORMERR | + MCP25XXFD_CAN_BDIAG1_NCRCERR | + MCP25XXFD_CAN_BDIAG1_NSTUFERR | + MCP25XXFD_CAN_BDIAG1_NFORMERR + )) == 0) + return; + + /* mark it as a protocol error */ + cpriv->error_frame.id |= CAN_ERR_PROT; + + /* and update statistics */ + cpriv->can.dev->stats.rx_errors++; + + /* handle the cases */ + if (cpriv->bus.bdiag[1] & MCP25XXFD_CAN_BDIAG1_DCRCERR) { + /* RX-Frame with bad CRC during data phase */ + *mask |= MCP25XXFD_CAN_BDIAG1_DCRCERR; + cpriv->can.dev->stats.rx_crc_errors++; + cpriv->error_frame.data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ; + } + + if (cpriv->bus.bdiag[1] & MCP25XXFD_CAN_BDIAG1_DSTUFERR) { + /* RX-Frame with bad stuffing during data phase */ + *mask |= MCP25XXFD_CAN_BDIAG1_DSTUFERR; + cpriv->can.dev->stats.rx_frame_errors++; + cpriv->error_frame.data[2] |= CAN_ERR_PROT_STUFF; + } + + if (cpriv->bus.bdiag[1] & MCP25XXFD_CAN_BDIAG1_DFORMERR) { + /* RX-Frame with bad format during data phase */ + *mask |= MCP25XXFD_CAN_BDIAG1_DFORMERR; + cpriv->can.dev->stats.rx_frame_errors++; + cpriv->error_frame.data[2] |= CAN_ERR_PROT_FORM; + } + + if (cpriv->bus.bdiag[1] & MCP25XXFD_CAN_BDIAG1_NCRCERR) { + /* RX-Frame with bad CRC during data phase */ + *mask |= MCP25XXFD_CAN_BDIAG1_NCRCERR; + cpriv->can.dev->stats.rx_crc_errors++; + cpriv->error_frame.data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ; + } + + if (cpriv->bus.bdiag[1] & MCP25XXFD_CAN_BDIAG1_NSTUFERR) { + /* RX-Frame with bad stuffing during data phase */ + *mask |= MCP25XXFD_CAN_BDIAG1_NSTUFERR; + cpriv->can.dev->stats.rx_frame_errors++; + cpriv->error_frame.data[2] |= CAN_ERR_PROT_STUFF; + } + + if (cpriv->bus.bdiag[1] & MCP25XXFD_CAN_BDIAG1_NFORMERR) { + /* RX-Frame with bad format during data phase */ + *mask |= MCP25XXFD_CAN_BDIAG1_NFORMERR; + cpriv->can.dev->stats.rx_frame_errors++; + cpriv->error_frame.data[2] |= CAN_ERR_PROT_FORM; + } +} + +static int mcp25xxfd_can_int_handle_ivmif(struct mcp25xxfd_can_priv *cpriv) +{ + struct spi_device *spi = cpriv->priv->spi; + u32 mask, bdiag1; + int ret; + + if (!(cpriv->status.intf & MCP25XXFD_CAN_INT_IVMIF)) + return 0; + + if (cpriv->status.intf & MCP25XXFD_CAN_INT_SERRIF) + return 0; + + ret = mcp25xxfd_cmd_read_regs(spi, MCP25XXFD_CAN_BDIAG0, + cpriv->bus.bdiag, + sizeof(cpriv->bus.bdiag)); + if (ret) + return ret; + + mask = 0; + + /* check rx and tx errors */ + mcp25xxfd_can_int_handle_ivmif_tx(cpriv, &mask); + mcp25xxfd_can_int_handle_ivmif_rx(cpriv, &mask); + + /* clear flags if we have bits masked */ + if (!mask) { + dev_warn_once(&spi->dev, + "found IVMIF situation not supported by driver - bdiag = [0x%08x, 0x%08x]", + cpriv->bus.bdiag[0], cpriv->bus.bdiag[1]); + return -EINVAL; + } + + bdiag1 = cpriv->bus.bdiag[1] & (~mask); + ret = mcp25xxfd_cmd_write_mask(spi, MCP25XXFD_CAN_BDIAG1, bdiag1, mask); + if (ret) + return ret; + + /* clear the interrupt flag until we have received or transmited */ + cpriv->status.intf &= ~(MCP25XXFD_CAN_INT_IVMIE); + return mcp25xxfd_cmd_write_mask(spi, MCP25XXFD_CAN_INT, + cpriv->status.intf, + MCP25XXFD_CAN_INT_IVMIE); +} + +static int mcp25xxfd_can_int_handle_cerrif(struct mcp25xxfd_can_priv *cpriv) +{ + if (!(cpriv->status.intf & MCP25XXFD_CAN_INT_CERRIF)) + return 0; + + /* this interrupt exists primarilly to counter possible bus off + * situations. More detailed information can be found and controlled in + * the TREC register + */ + + netdev_warn(cpriv->can.dev, "CAN Bus error experienced"); + + return 0; +} + +static int mcp25xxfd_can_int_error_counters(struct mcp25xxfd_can_priv *cpriv) +{ + if (cpriv->status.trec & MCP25XXFD_CAN_TREC_TXWARN) { + cpriv->bus.new_state = CAN_STATE_ERROR_WARNING; + cpriv->error_frame.id |= CAN_ERR_CRTL; + cpriv->error_frame.data[1] |= CAN_ERR_CRTL_TX_WARNING; + } + + if (cpriv->status.trec & MCP25XXFD_CAN_TREC_RXWARN) { + cpriv->bus.new_state = CAN_STATE_ERROR_WARNING; + cpriv->error_frame.id |= CAN_ERR_CRTL; + cpriv->error_frame.data[1] |= CAN_ERR_CRTL_RX_WARNING; + } + + if (cpriv->status.trec & MCP25XXFD_CAN_TREC_TXBP) { + cpriv->bus.new_state = CAN_STATE_ERROR_PASSIVE; + cpriv->error_frame.id |= CAN_ERR_CRTL; + cpriv->error_frame.data[1] |= CAN_ERR_CRTL_TX_PASSIVE; + } + + if (cpriv->status.trec & MCP25XXFD_CAN_TREC_RXBP) { + cpriv->bus.new_state = CAN_STATE_ERROR_PASSIVE; + cpriv->error_frame.id |= CAN_ERR_CRTL; + cpriv->error_frame.data[1] |= CAN_ERR_CRTL_RX_PASSIVE; + } + + if (cpriv->status.trec & MCP25XXFD_CAN_TREC_TXBO) { + cpriv->bus.new_state = CAN_STATE_BUS_OFF; + cpriv->error_frame.id |= CAN_ERR_BUSOFF; + } + + return 0; +} + +static int mcp25xxfd_can_int_error_handling(struct mcp25xxfd_can_priv *cpriv) +{ + /* based on the last state state check the new state */ + switch (cpriv->can.state) { + case CAN_STATE_ERROR_ACTIVE: + if (cpriv->bus.new_state >= CAN_STATE_ERROR_WARNING && + cpriv->bus.new_state <= CAN_STATE_BUS_OFF) + cpriv->can.can_stats.error_warning++; + fallthrough; + case CAN_STATE_ERROR_WARNING: + if (cpriv->bus.new_state >= CAN_STATE_ERROR_PASSIVE && + cpriv->bus.new_state <= CAN_STATE_BUS_OFF) + cpriv->can.can_stats.error_passive++; + break; + default: + break; + } + + cpriv->can.state = cpriv->bus.new_state; + + /* send error packet */ + if (cpriv->error_frame.id) + mcp25xxfd_can_int_send_error_skb(cpriv); + + /* handle BUS OFF */ + if (cpriv->can.state == CAN_STATE_BUS_OFF) { + if (cpriv->can.restart_ms == 0) { + cpriv->can.can_stats.bus_off++; + can_bus_off(cpriv->can.dev); + } + } + + return 0; +} + +static int mcp25xxfd_can_int_handle_status(struct mcp25xxfd_can_priv *cpriv) +{ + int ret; + + ret = mcp25xxfd_can_int_clear_int_flags(cpriv); + if (ret) + return ret; + + /* set up new state and error frame for this loop */ + cpriv->bus.new_state = cpriv->bus.state; + memset(&cpriv->error_frame, 0, sizeof(cpriv->error_frame)); + + /* setup the process queue by clearing the counter */ + cpriv->fifos.submit_queue_count = 0; + + /* system error interrupt needs to get handled first + * to get us out of restricted mode + */ + ret = mcp25xxfd_can_int_handle_serrif(cpriv); + if (ret) + return ret; + + /* mode change interrupt */ + ret = mcp25xxfd_can_int_handle_modif(cpriv); + if (ret) + return ret; + + /* handle the rx */ + ret = mcp25xxfd_can_rx_handle_int_rxif(cpriv); + if (ret) + return ret; + + /* handle error interrupt flags */ + ret = mcp25xxfd_can_rx_handle_int_rxovif(cpriv); + if (ret) + return ret; + + /* sram ECC error interrupt */ + ret = mcp25xxfd_can_int_handle_eccif(cpriv); + if (ret) + return ret; + + /* message format interrupt */ + ret = mcp25xxfd_can_int_handle_ivmif(cpriv); + if (ret) + return ret; + + /* handle bus errors in more detail */ + ret = mcp25xxfd_can_int_handle_cerrif(cpriv); + if (ret) + return ret; + + /* error counter handling */ + ret = mcp25xxfd_can_int_error_counters(cpriv); + if (ret) + return ret; + + /* error counter handling */ + ret = mcp25xxfd_can_int_error_handling(cpriv); + if (ret) + return ret; + + /* and submit can frames to network stack */ + ret = mcp25xxfd_can_int_submit_frames(cpriv); + + return ret; +} + +irqreturn_t mcp25xxfd_can_int(int irq, void *dev_id) +{ + struct mcp25xxfd_can_priv *cpriv = dev_id; + int loops, ret; + + /* loop forever unless we need to exit */ + for (loops = 0; true; loops++) { + /* read interrupt status flags in bulk */ + ret = mcp25xxfd_cmd_read_regs(cpriv->priv->spi, + MCP25XXFD_CAN_INT, + &cpriv->status.intf, + sizeof(cpriv->status)); + if (ret) + return ret; + + /* only act if the IE mask configured has active IF bits + * otherwise the Interrupt line should be deasserted already + * so we can exit the loop + */ + if (((cpriv->status.intf >> MCP25XXFD_CAN_INT_IE_SHIFT) & + cpriv->status.intf) == 0) + break; + + /* handle the status */ + ret = mcp25xxfd_can_int_handle_status(cpriv); + if (ret) + return ret; + + /* allow voluntarily rescheduling every so often to avoid + * long CS lows at the end of a transfer on low power CPUs + * avoiding SERR happening + */ + if (loops % MCP25XXFD_RESCHEDULE_TIMES == 0) + cond_resched(); + } + + return IRQ_HANDLED; +} + +int mcp25xxfd_can_int_clear(struct mcp25xxfd_priv *priv) +{ + return mcp25xxfd_cmd_write_mask(priv->spi, MCP25XXFD_CAN_INT, 0, + MCP25XXFD_CAN_INT_IF_MASK); +} + +int mcp25xxfd_can_int_enable(struct mcp25xxfd_priv *priv, bool enable) +{ + struct mcp25xxfd_can_priv *cpriv = priv->cpriv; + const u32 mask = MCP25XXFD_CAN_INT_TEFIE | + MCP25XXFD_CAN_INT_RXIE | + MCP25XXFD_CAN_INT_MODIE | + MCP25XXFD_CAN_INT_SERRIE | + MCP25XXFD_CAN_INT_IVMIE | + MCP25XXFD_CAN_INT_CERRIE | + MCP25XXFD_CAN_INT_RXOVIE | + MCP25XXFD_CAN_INT_ECCIE; + u32 value = cpriv ? cpriv->status.intf : 0; + int ret; + + value &= ~(MCP25XXFD_CAN_INT_IE_MASK); + if (enable) + value |= mask; + + ret = mcp25xxfd_cmd_write_mask(priv->spi, MCP25XXFD_CAN_INT, + value, mask); + if (ret) + return ret; + + if (!cpriv) + return 0; + + cpriv->status.intf = value; + if (cpriv->irq.allocated) { + if (enable && !cpriv->irq.enabled) + enable_irq(cpriv->priv->spi->irq); + if (!enable && cpriv->irq.enabled) + disable_irq(cpriv->priv->spi->irq); + cpriv->irq.enabled = enable; + } else { + cpriv->irq.enabled = false; + } + + return 0; +} diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_int.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_int.h new file mode 100644 index 000000000000..aa67a5da9271 --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_int.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl + */ +#ifndef __MCP25XXFD_CAN_INT_H +#define __MCP25XXFD_CAN_INT_H + +#include "mcp25xxfd_priv.h" +#include + +int mcp25xxfd_can_int_clear(struct mcp25xxfd_priv *priv); +int mcp25xxfd_can_int_enable(struct mcp25xxfd_priv *priv, bool enable); + +irqreturn_t mcp25xxfd_can_int(int irq, void *dev_id); + +#endif /* __MCP25XXFD_CAN_INT_H */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_priv.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_priv.h new file mode 100644 index 000000000000..e043b262a868 --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_priv.h @@ -0,0 +1,131 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl + */ + +#ifndef __MCP25XXFD_CAN_PRIV_H +#define __MCP25XXFD_CAN_PRIV_H + +#include +#include + +#include "mcp25xxfd_priv.h" + +#define TX_ECHO_SKB_MAX 32 + +/* information on each fifo type */ +struct mcp25xxfd_fifo { + u32 count; + u32 start; + u32 size; +}; + +/* used for sorting incoming messages */ +struct mcp25xxfd_obj_ts { + s32 ts; /* using signed to handle rollover correctly when sorting */ + u16 fifo; +}; + +/* general info on each fifo */ +struct mcp25xxfd_fifo_info { + u32 offset; + u32 priority; +}; + +struct mcp25xxfd_can_priv { + /* can_priv has to be the first one to be usable with alloc_candev + * which expects struct can_priv to be right at the start of the + * priv structure + */ + struct can_priv can; + struct mcp25xxfd_priv *priv; + struct regulator *transceiver; + + /* the can mode currently active */ + int mode; + + /* interrupt state */ + struct { + int enabled; + int allocated; + } irq; + + /* can config registers */ + struct { + u32 con; + u32 tdc; + u32 tscon; + u32 tefcon; + u32 nbtcfg; + u32 dbtcfg; + } regs; + + /* can status registers (mostly) - read in one go + * bdiag0 and bdiag1 are optional, but when + * berr counters are requested on a regular basis + * during high CAN-bus load this would trigger the fact + * that spi_sync would get queued for execution in the + * spi thread and the spi handler would not get + * called inline in the interrupt thread without any + * context switches or wakeups... + */ + struct { + u32 intf; + /* ASSERT(CAN_INT + 4 == CAN_RXIF) */ + u32 rxif; + /* ASSERT(CAN_RXIF + 4 == CAN_TXIF) */ + u32 txif; + /* ASSERT(CAN_TXIF + 4 == CAN_RXOVIF) */ + u32 rxovif; + /* ASSERT(CAN_RXOVIF + 4 == CAN_TXATIF) */ + u32 txatif; + /* ASSERT(CAN_TXATIF + 4 == CAN_TXREQ) */ + u32 txreq; + /* ASSERT(CAN_TXREQ + 4 == CAN_TREC) */ + u32 trec; + } status; + + /* information of fifo setup */ + struct { + /* define payload size and mode */ + u32 payload_size; + u32 payload_mode; + + /* infos on fifo layout */ + + /* info on each fifo */ + struct mcp25xxfd_fifo_info info[32]; + + /* extra info on rx fifo groups */ + struct mcp25xxfd_fifo rx; + + /* queue of can frames that need to get submitted + * to the network stack during an interrupt loop in one go + * (this gets sorted by timestamp before submission + * and contains both rx frames as well tx frames that have + * gone over the CAN bus successfully + */ + struct mcp25xxfd_obj_ts submit_queue[32]; + int submit_queue_count; + } fifos; + + /* bus state */ + struct { + u32 state; + u32 new_state; + u32 bdiag[2]; + } bus; + + /* can error messages */ + struct { + u32 id; + u8 data[8]; + } error_frame; + + /* a copy of mcp25xxfd-sram in ram */ + u8 sram[MCP25XXFD_SRAM_SIZE]; +}; + +#endif /* __MCP25XXFD_CAN_PRIV_H */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_rx.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_rx.c new file mode 100644 index 000000000000..5e3f706e7a3f --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_rx.c @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl + * + * Based on Microchip MCP251x CAN controller driver written by + * David Vrabel, Copyright 2006 Arcom Control Systems Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "mcp25xxfd_cmd.h" +#include "mcp25xxfd_can.h" +#include "mcp25xxfd_can_id.h" +#include "mcp25xxfd_can_priv.h" +#include "mcp25xxfd_can_rx.h" + +static struct sk_buff * +mcp25xxfd_can_rx_submit_normal_frame(struct mcp25xxfd_can_priv *cpriv, + u32 id, u32 dlc, u8 **data) +{ + struct can_frame *frame; + struct sk_buff *skb; + + /* allocate frame */ + skb = alloc_can_skb(cpriv->can.dev, &frame); + if (!skb) + return NULL; + + /* set id, dlc and flags */ + frame->can_id = id; + frame->can_dlc = dlc; + + /* and set the pointer to data */ + *data = frame->data; + + return skb; +} + +/* it is almost identical except for the type of the frame... */ +static struct sk_buff * +mcp25xxfd_can_rx_submit_fd_frame(struct mcp25xxfd_can_priv *cpriv, + u32 id, u32 flags, u32 len, u8 **data) +{ + struct canfd_frame *frame; + struct sk_buff *skb; + + /* allocate frame */ + skb = alloc_canfd_skb(cpriv->can.dev, &frame); + if (!skb) + return NULL; + + /* set id, dlc and flags */ + frame->can_id = id; + frame->len = len; + frame->flags |= flags; + + /* and set the pointer to data */ + *data = frame->data; + + return skb; +} + +int mcp25xxfd_can_rx_submit_frame(struct mcp25xxfd_can_priv *cpriv, int fifo) +{ + struct net_device *net = cpriv->can.dev; + int addr = cpriv->fifos.info[fifo].offset; + struct mcp25xxfd_can_obj_rx *rx = + (struct mcp25xxfd_can_obj_rx *)(cpriv->sram + addr); + u8 *data = NULL; + struct sk_buff *skb; + u32 id, dlc, len, flags; + + /* compute the can_id */ + mcp25xxfd_can_id_from_mcp25xxfd(rx->id, rx->flags, &id); + + /* and dlc */ + dlc = (rx->flags & MCP25XXFD_CAN_OBJ_FLAGS_DLC_MASK) >> + MCP25XXFD_CAN_OBJ_FLAGS_DLC_SHIFT; + len = can_dlc2len(dlc); + + /* update stats */ + net->stats.rx_packets++; + net->stats.rx_bytes += len; + + /* allocate the skb buffer */ + if (rx->flags & MCP25XXFD_CAN_OBJ_FLAGS_FDF) { + flags = 0; + flags |= (rx->flags & MCP25XXFD_CAN_OBJ_FLAGS_BRS) ? + CANFD_BRS : 0; + flags |= (rx->flags & MCP25XXFD_CAN_OBJ_FLAGS_ESI) ? + CANFD_ESI : 0; + skb = mcp25xxfd_can_rx_submit_fd_frame(cpriv, id, flags, + len, &data); + } else { + skb = mcp25xxfd_can_rx_submit_normal_frame(cpriv, id, + len, &data); + } + if (!skb) { + netdev_err(net, "cannot allocate RX skb\n"); + net->stats.rx_dropped++; + return -ENOMEM; + } + + /* copy the payload data */ + memcpy(data, rx->data, len); + + /* and submit the frame */ + netif_rx_ni(skb); + + return 0; +} + +static int mcp25xxfd_can_rx_read_frame(struct mcp25xxfd_can_priv *cpriv, + int fifo, int prefetch_bytes) +{ + struct spi_device *spi = cpriv->priv->spi; + struct net_device *net = cpriv->can.dev; + int addr = cpriv->fifos.info[fifo].offset; + struct mcp25xxfd_can_obj_rx *rx = + (struct mcp25xxfd_can_obj_rx *)(cpriv->sram + addr); + int dlc; + int len, ret; + + /* we read the header plus prefetch_bytes */ + ret = mcp25xxfd_cmd_read_multi(spi, MCP25XXFD_SRAM_ADDR(addr), + rx, sizeof(*rx) + prefetch_bytes); + if (ret) + return ret; + + /* transpose the headers to CPU format*/ + rx->id = le32_to_cpu(rx->id); + rx->flags = le32_to_cpu(rx->flags); + rx->ts = le32_to_cpu(rx->ts); + + /* compute len */ + dlc = (rx->flags & MCP25XXFD_CAN_OBJ_FLAGS_DLC_MASK) >> + MCP25XXFD_CAN_OBJ_FLAGS_DLC_SHIFT; + len = can_dlc2len(min_t(int, dlc, (net->mtu == CANFD_MTU) ? 15 : 8)); + + /* read the remaining data for canfd frames */ + if (len > prefetch_bytes) { + /* here the extra portion reading data after prefetch */ + ret = mcp25xxfd_cmd_read_multi(spi, + MCP25XXFD_SRAM_ADDR(addr) + + sizeof(*rx) + prefetch_bytes, + &rx->data[prefetch_bytes], + len - prefetch_bytes); + if (ret) + return ret; + } + + /* clear the rest of the buffer - just to be safe */ + memset(rx->data + len, 0, ((net->mtu == CANFD_MTU) ? 64 : 8) - len); + + /* add the fifo to the process queues */ + mcp25xxfd_can_queue_frame(cpriv, fifo, rx->ts); + + /* and clear the interrupt flag for that fifo */ + return mcp25xxfd_cmd_write_mask(spi, MCP25XXFD_CAN_FIFOCON(fifo), + MCP25XXFD_CAN_FIFOCON_FRESET, + MCP25XXFD_CAN_FIFOCON_FRESET); +} + +static int mcp25xxfd_can_rx_read_frames(struct mcp25xxfd_can_priv *cpriv) +{ + int i, f, prefetch; + int ret; + + prefetch = 8; + /* TODO: Optimize this */ + for (i = 0, f = cpriv->fifos.rx.start; i < cpriv->fifos.rx.count; + i++, f++) { + if (cpriv->status.rxif & BIT(f)) { + /* read the frame */ + ret = mcp25xxfd_can_rx_read_frame(cpriv, f, prefetch); + if (ret) + return ret; + } + } + + return 0; +} + +int mcp25xxfd_can_rx_handle_int_rxif(struct mcp25xxfd_can_priv *cpriv) +{ + if (!cpriv->status.rxif) + return 0; + + /* read all the fifos */ + return mcp25xxfd_can_rx_read_frames(cpriv); +} + +int mcp25xxfd_can_rx_handle_int_rxovif(struct mcp25xxfd_can_priv *cpriv) +{ + u32 mask = MCP25XXFD_CAN_FIFOSTA_RXOVIF; + int ret, i, reg; + + if (!cpriv->status.rxovif) + return 0; + + /* clear all fifos that have an overflow bit set */ + for (i = 0; i < 32; i++) { + if (cpriv->status.rxovif & BIT(i)) { + /* clear fifo status */ + reg = MCP25XXFD_CAN_FIFOSTA(i); + ret = mcp25xxfd_cmd_write_mask(cpriv->priv->spi, + reg, 0, mask); + if (ret) + return ret; + + /* update statistics */ + cpriv->can.dev->stats.rx_over_errors++; + cpriv->can.dev->stats.rx_errors++; + + /* and prepare ERROR FRAME */ + cpriv->error_frame.id |= CAN_ERR_CRTL; + cpriv->error_frame.data[1] |= + CAN_ERR_CRTL_RX_OVERFLOW; + } + } + + return 0; +} diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_rx.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_rx.h new file mode 100644 index 000000000000..71953e2f3615 --- /dev/null +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_can_rx.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* CAN bus driver for Microchip 25XXFD CAN Controller with SPI Interface + * + * Copyright 2019 Martin Sperl + */ + +#ifndef __MCP25XXFD_CAN_RX_H +#define __MCP25XXFD_CAN_RX_H + +#include "mcp25xxfd_priv.h" + +int mcp25xxfd_can_rx_submit_frame(struct mcp25xxfd_can_priv *cpriv, int fifo); + +int mcp25xxfd_can_rx_handle_int_rxif(struct mcp25xxfd_can_priv *cpriv); +int mcp25xxfd_can_rx_handle_int_rxovif(struct mcp25xxfd_can_priv *cpriv); + +#endif /* __MCP25XXFD_CAN_RX_H */ diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_int.c b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_int.c index 5e274d452646..182172b6c59c 100644 --- a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_int.c +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_int.c @@ -8,6 +8,7 @@ #include #include +#include "mcp25xxfd_can_int.h" #include "mcp25xxfd_crc.h" #include "mcp25xxfd_ecc.h" #include "mcp25xxfd_int.h" @@ -21,7 +22,11 @@ int mcp25xxfd_int_clear(struct mcp25xxfd_priv *priv) if (ret) return ret; - return mcp25xxfd_crc_clear_int(priv); + ret = mcp25xxfd_crc_clear_int(priv); + if (ret) + return ret; + + return mcp25xxfd_can_int_clear(priv); } int mcp25xxfd_int_enable(struct mcp25xxfd_priv *priv, bool enable) @@ -47,12 +52,19 @@ int mcp25xxfd_int_enable(struct mcp25xxfd_priv *priv, bool enable) if (ret) goto out_crc; + ret = mcp25xxfd_can_int_enable(priv, enable); + if (ret) + goto out_ecc; + /* If we disable interrupts, then clear interrupt flags last */ if (!enable) mcp25xxfd_int_clear(priv); return 0; +out_ecc: + mcp25xxfd_ecc_enable_int(priv, false); + out_crc: mcp25xxfd_crc_enable_int(priv, false); return ret; diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_priv.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_priv.h index 8bc7a599224c..85c27a7f6785 100644 --- a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_priv.h +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_priv.h @@ -23,9 +23,11 @@ enum mcp25xxfd_model { CAN_MCP2517FD = 0x2517, }; +struct mcp25xxfd_can_priv; struct mcp25xxfd_priv { struct spi_device *spi; struct clk *clk; + struct mcp25xxfd_can_priv *cpriv; /* actual model of the mcp25xxfd */ enum mcp25xxfd_model model; diff --git a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_regs.h b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_regs.h index b500cb46b9a4..222527439c70 100644 --- a/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_regs.h +++ b/drivers/net/can/spi/mcp25xxfd/mcp25xxfd_regs.h @@ -653,4 +653,9 @@ struct mcp25xxfd_can_obj_tef { MCP25XXFD_CAN_FLAGS_FILHIT_BITS - 1, \ MCP25XXFD_CAN_FLAGS_FILHIT_SHIFT) +/* custom status error */ +#define MCP25XXFD_CAN_ERR_DATA7_MCP25XXFD_SERR_RX BIT(0) +#define MCP25XXFD_CAN_ERR_DATA7_MCP25XXFD_SERR_TX BIT(1) +#define MCP25XXFD_CAN_ERR_DATA7_MCP25XXFD_ECC BIT(2) + #endif /* __MCP25XXFD_REGS_H */