diff mbox series

[v3,22/39] dt-bindings: host1x: Document new interconnect properties

Message ID 20200607185530.18113-23-digetx@gmail.com
State Accepted
Commit c553bb54a486eab2b0d3671db4b985c8d1ba51e9
Headers show
Series [v3,01/39] clk: Export clk_hw_reparent() | expand

Commit Message

Dmitry Osipenko June 7, 2020, 6:55 p.m. UTC
Most of Host1x devices have at least one memory client. These clients
are directly connected to the memory controller. The new interconnect
properties represent the memory client's connection to the memory
controller.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 .../display/tegra/nvidia,tegra20-host1x.txt   | 68 +++++++++++++++++++
 1 file changed, 68 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index 47319214b5f6..ab4fbee7bccf 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -20,6 +20,10 @@  Required properties:
 - reset-names: Must include the following entries:
   - host1x
 
+Each host1x client module having to perform DMA through the Memory Controller
+should have the interconnect endpoints set to the Memory Client and External
+Memory respectively.
+
 The host1x top-level node defines a number of children, each representing one
 of the following host1x client modules:
 
@@ -36,6 +40,12 @@  of the following host1x client modules:
   - reset-names: Must include the following entries:
     - mpe
 
+  Optional properties:
+  - interconnects: Must contain entry for the MPE memory clients.
+  - interconnect-names: Must include name of the interconnect path for each
+    interconnect entry. Consult TRM documentation for information about
+    available memory clients, see MEMORY CONTROLLER section.
+
 - vi: video input
 
   Required properties:
@@ -65,6 +75,12 @@  of the following host1x client modules:
       - power-domains: Must include sor powergate node as csicil is in
         SOR partition.
 
+  Optional properties:
+  - interconnects: Must contain entry for the VI memory clients.
+  - interconnect-names: Must include name of the interconnect path for each
+    interconnect entry. Consult TRM documentation for information about
+    available memory clients, see MEMORY CONTROLLER section.
+
 - epp: encoder pre-processor
 
   Required properties:
@@ -78,6 +94,12 @@  of the following host1x client modules:
   - reset-names: Must include the following entries:
     - epp
 
+  Optional properties:
+  - interconnects: Must contain entry for the EPP memory clients.
+  - interconnect-names: Must include name of the interconnect path for each
+    interconnect entry. Consult TRM documentation for information about
+    available memory clients, see MEMORY CONTROLLER section.
+
 - isp: image signal processor
 
   Required properties:
@@ -91,6 +113,12 @@  of the following host1x client modules:
   - reset-names: Must include the following entries:
     - isp
 
+  Optional properties:
+  - interconnects: Must contain entry for the ISP memory clients.
+  - interconnect-names: Must include name of the interconnect path for each
+    interconnect entry. Consult TRM documentation for information about
+    available memory clients, see MEMORY CONTROLLER section.
+
 - gr2d: 2D graphics engine
 
   Required properties:
@@ -104,6 +132,12 @@  of the following host1x client modules:
   - reset-names: Must include the following entries:
     - 2d
 
+  Optional properties:
+  - interconnects: Must contain entry for the GR2D memory clients.
+  - interconnect-names: Must include name of the interconnect path for each
+    interconnect entry. Consult TRM documentation for information about
+    available memory clients, see MEMORY CONTROLLER section.
+
 - gr3d: 3D graphics engine
 
   Required properties:
@@ -122,6 +156,12 @@  of the following host1x client modules:
     - 3d
     - 3d2 (Only required on SoCs with two 3D clocks)
 
+  Optional properties:
+  - interconnects: Must contain entry for the GR3D memory clients.
+  - interconnect-names: Must include name of the interconnect path for each
+    interconnect entry. Consult TRM documentation for information about
+    available memory clients, see MEMORY CONTROLLER section.
+
 - dc: display controller
 
   Required properties:
@@ -149,6 +189,10 @@  of the following host1x client modules:
   - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
   - nvidia,edid: supplies a binary EDID blob
   - nvidia,panel: phandle of a display panel
+  - interconnects: Must contain entry for the DC memory clients.
+  - interconnect-names: Must include name of the interconnect path for each
+    interconnect entry. Consult TRM documentation for information about
+    available memory clients, see MEMORY CONTROLLER section.
 
 - hdmi: High Definition Multimedia Interface
 
@@ -297,6 +341,12 @@  of the following host1x client modules:
   - reset-names: Must include the following entries:
     - vic
 
+  Optional properties:
+  - interconnects: Must contain entry for the VIC memory clients.
+  - interconnect-names: Must include name of the interconnect path for each
+    interconnect entry. Consult TRM documentation for information about
+    available memory clients, see MEMORY CONTROLLER section.
+
 Example:
 
 / {
@@ -410,6 +460,15 @@  Example:
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
+			interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>,
+					<&mc TEGRA20_MC_DISPLAY0B &emc>,
+					<&mc TEGRA20_MC_DISPLAY0C &emc>,
+					<&mc TEGRA20_MC_DISPLAY1B &emc>;
+			interconnect-names = "display0a",
+					     "display0b",
+					     "display0c",
+					     "display1b";
+
 			rgb {
 				status = "disabled";
 			};
@@ -425,6 +484,15 @@  Example:
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
+			interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>,
+					<&mc TEGRA20_MC_DISPLAY0BB &emc>,
+					<&mc TEGRA20_MC_DISPLAY0CB &emc>,
+					<&mc TEGRA20_MC_DISPLAY1BB &emc>;
+			interconnect-names = "display0a",
+					     "display0b",
+					     "display0c",
+					     "display1b";
+
 			rgb {
 				status = "disabled";
 			};